Effectiveness for detecting faults within and outside the scope of testing techniques: an independent replication

The verification and validation activity plays a fundamental role in improving software quality. Determining which the most effective techniques for carrying out this activity are has been an aspiration of experimental software engineering researchers for years. This paper reports a controlled experiment evaluating the effectiveness of two unit testing techniques (the functional testing technique known as equivalence partitioning (EP) and the control-flow structural testing technique known as branch testing (BT)). This experiment is a literal replication of Juristo et al. (2013). Both experiments serve the purpose of determining whether the effectiveness of BT and EP varies depending on whether or not the faults are visible for the technique (InScope or OutScope, respectively). We have used the materials, design and procedures of the original experiment, but in order to adapt the experiment to the context we have: (1) reduced the number of studied techniques from 3 to 2; (2) assigned subjects to experimental groups by means of stratified randomization to balance the influence of programming experience; (3) localized the experimental materials and (4) adapted the training duration. We ran the replication at the Escuela Polite?cnica del Eje?rcito Sede Latacunga (ESPEL) as part of a software verification & validation course. The experimental subjects were 23 master?s degree students. EP is more effective than BT at detecting InScope faults. The session/program and group variables are found to have significant effects. BT is more effective than EP at detecting OutScope faults. The session/program and group variables have no effect in this case. The results of the replication and the original experiment are similar with respect to testing techniques. There are some inconsistencies with respect to the group factor. They can be explained by small sample effects. The results for the session/program factor are inconsistent for InScope faults. We believe that these differences are due to a combination of the fatigue effect and a technique x program interaction. Although we were able to reproduce the main effects, the changes to the design of the original experiment make it impossible to identify the causes of the discrepancies for sure. We believe that further replications closely resembling the original experiment should be conducted to improve our understanding of the phenomena under study.

Analysis of the performance of tapered semiconductor optical amplifiers: role of the taper angle

The beam properties of tapered semiconductor optical amplifiers emitting at 1.57 μm are analyzed by means of simulations with a self-consistent steady state electro-optical and thermal simulator. The results indicate that the self-focusing caused by carrier lensing is delayed to higher currents for devices with taper angle slightly higher than the free diffraction angle.

Hybridizing concentrated solar power (CSP) with biogas and biomethane as an alternative to natural gas: Analysis of environmental performance using LCA

Concentrating Solar Power (CSP) plants typically incorporate one or various auxiliary boilers operating in parallel to the solar field to facilitate start up operations, provide system stability, avoid freezing of heat transfer fluid (HTF) and increase generation capacity. The environmental performance of these plants is highly influenced by the energy input and the type of auxiliary fuel, which in most cases is natural gas (NG). Replacing the NG with biogas or biomethane (BM) in commercial CSP installations is being considered as a means to produce electricity that is fully renewable and free from fossil inputs. Despite their renewable nature, the use of these biofuels also generates environmental impacts that need to be adequately identified and quantified. This paper investigates the environmental performance of a commercial wet-cooled parabolic trough 50 MWe CSP plant in Spain operating according to two strategies: solar-only, with minimum technically viable energy non-solar contribution; and hybrid operation, where 12 % of the electricity derives from auxiliary fuels (as permitted by Spanish legislation). The analysis was based on standard Life Cycle Assessment (LCA) methodology (ISO 14040-14040). The technical viability and the environmental profile of operating the CSP plant with different auxiliary fuels was evaluated, including: NG; biogas from an adjacent plant; and BM withdrawn from the gas network. The effect of using different substrates (biowaste, sewage sludge, grass and a mix of biowaste with animal manure) for the production of the biofuels was also investigated. The results showed that NG is responsible for most of the environmental damage associated with the operation of the plant in hybrid mode. Replacing NG with biogas resulted in a significant improvement of the environmental performance of the installation, primarily due to reduced impact in the following categories: natural land transformation, depletion of fossil resources, and climate change. However, despite the renewable nature of the biofuels, other environmental categories like human toxicity, eutrophication, acidification and marine ecotoxicity scored higher when using biogas and BM.

Simulation of thermal performance of glazing in architecture using scale models = Simulación del comportamiento térmico de los acristalamientos en la arquitectura mediante modelos a escala

El propósito de esta tesis es estudiar la aproximación a los fenómenos de transporte térmico en edificación acristalada a través de sus réplicas a escala. La tarea central de esta tesis es, por lo tanto, la comparación del comportamiento térmico de modelos a escala con el correspondiente comportamiento térmico del prototipo a escala real. Los datos principales de comparación entre modelo y prototipo serán las temperaturas. En el primer capítulo del Estado del Arte de esta tesis se hará un recorrido histórico por los usos de los modelos a escala desde la antigüedad hasta nuestro días. Dentro de éste, en el Estado de la Técnica, se expondrán los beneficios que tiene su empleo y las dificultades que conllevan. A continuación, en el Estado de la Investigación de los modelos a escala, se analizarán artículos científicos y tesis. Precisamente, nos centraremos en aquellos modelos a escala que son funcionales. Los modelos a escala funcionales son modelos a escala que replican, además, una o algunas de las funciones de sus prototipos. Los modelos a escala pueden estar distorsionados o no. Los modelos a escala distorsionados son aquellos con cambios intencionados en las dimensiones o en las características constructivas para la obtención de una respuesta específica por ejemplo, replicar el comportamiento térmico. Los modelos a escala sin distorsión, o no distorsionados, son aquellos que mantienen, en la medida de lo posible, las proporciones dimensionales y características constructivas de sus prototipos de referencia. Estos modelos a escala funcionales y no distorsionados son especialmente útiles para los arquitectos ya que permiten a la vez ser empleados como elementos funcionales de análisis y como elementos de toma de decisiones en el diseño constructivo. A pesar de su versatilidad, en general, se observará que se han utilizado muy poco estos modelos a escala funcionales sin distorsión para el estudio del comportamiento térmico de la edificación. Posteriormente, se expondrán las teorías para el análisis de los datos térmicos recogidos de los modelos a escala y su aplicabilidad a los correspondientes prototipos a escala real. Se explicarán los experimentos llevados a cabo, tanto en laboratorio como a intemperie. Se han realizado experimentos con modelos sencillos cúbicos a diferentes escalas y sometidos a las mismas condiciones ambientales. De estos modelos sencillos hemos dado el salto a un modelo reducido de una edificación acristalada relativamente sencilla. Los experimentos consisten en ensayos simultáneos a intemperie del prototipo a escala real y su modelo reducido del Taller de Prototipos de la Escuela Técnica Superior de Arquitectura de Madrid (ETSAM). Para el análisis de los datos experimentales hemos aplicado las teorías conocidas, tanto comparaciones directas como el empleo del análisis dimensional. Finalmente, las simulaciones nos permiten comparaciones flexibles con los datos experimentales, por ese motivo, hemos utilizado tanto programas comerciales como un algoritmo de simulación desarrollado ad hoc para esta investigación. Finalmente, exponemos la discusión y las conclusiones de esta investigación. Abstract The purpose of this thesis is to study the approximation to phenomena of heat transfer in glazed buildings through their scale replicas. The central task of this thesis is, therefore, the comparison of the thermal performance of scale models without distortion with the corresponding thermal performance of their full-scale prototypes. Indoor air temperatures of the scale model and the corresponding prototype are the data to be compared. In the first chapter on the State of the Art, it will be shown a broad vision, consisting of a historic review of uses of scale models, from antiquity to our days. In the section State of the Technique, the benefits and difficulties associated with their implementation are presented. Additionally, in the section State of the Research, current scientific papers and theses on scale models are reviewed. Specifically, we focus on functional scale models. Functional scale models are scale models that replicate, additionally, one or some of the functions of their corresponding prototypes. Scale models can be distorted or not. Scale models with distortion are considered scale models with intentional changes, on one hand, in dimensions scaled unevenly and, on the other hand, in constructive characteristics or materials, in order to get a specific performance for instance, a specific thermal performance. Consequently, scale models without distortion, or undistorted scale models scaled evenly, are those replicating, to the extent possible, without distortion, the dimensional proportions and constructive configurations of their prototypes of reference. These undistorted and functional scale models are especially useful for architects because they can be used, simultaneously, as functional elements of analysis and as decision-making elements during the design. Although they are versatile, in general, it is remarkable that these types of models are used very little for the study of the thermal performance of buildings. Subsequently, the theories related to the analysis of the experimental thermal data collected from the scale models and their applicability to the corresponding full-scale prototypes, will be explained. Thereafter, the experiments in laboratory and at outdoor conditions are detailed. Firstly, experiments carried out with simple cube models at different scales are explained. The prototype larger in size and the corresponding undistorted scale model have been subjected to same environmental conditions in every experimental test. Secondly, a step forward is taken carrying out some simultaneous experimental tests of an undistorted scale model, replica of a relatively simple lightweight and glazed building construction. This experiment consists of monitoring the undistorted scale model of the prototype workshop located in the School of Architecture (ETSAM) of the Technical University of Madrid (UPM). For the analysis of experimental data, known related theories and resources are applied, such as, direct comparisons, statistical analyses, Dimensional Analysis and last, but not least important, simulations. Simulations allow us, specifically, flexible comparisons with experimental data. Here, apart the use of the simulation software EnergyPlus, a simulation algorithm is developed ad hoc for this research. Finally, the discussion and conclusions of this research are exposed.

La silla de la discordia : la pequeña escala como campo de experimentación en la modernidad : Breuer, Mies y Stam

El siglo XIX fue un siglo dedicado a los grandes edificios públicos. Los teatros, las academias, los museos. Sin embargo la arquitectura durante el siglo XX se dedicará al estudio de la casa. Todos los usos y tipologías se verán fuertemente revisados pero el núcleo de todos los esfuerzos y verdadero inicio de la arquitectura moderna será la vivienda. A partir de ella todos los preceptos modernos se irán aplicando a los distintos programas. Nikolaus Pevsner señala a William Morris como el primer arquitecto moderno porque precisamente entendió que un arte verdaderamente social, en consonancia con su tiempo y la sociedad a la que sirve, ha de ocuparse de aquello que preocupe a la gente. Con la nueva situación de la vivienda en el centro de las motivaciones disciplinares el mueble adopta un nuevo protagonismo. En un momento avanzado de su carrera Marcel Breuer observa entre curioso e irónico cómo el mueble moderno había sido promocionado paradójicamente no por los diseñadores de muebles sino por los arquitectos1. La respuesta la da Le Corbusier en una de sus conferencias de 1931 recogida en Precisiones 2 cuando señala la reformulación del mobiliario como el "nudo gordiano" de cuya resolución pendía la renovación de la planta moderna. El Movimiento Moderno se había visto obligado a atacar este tema para poder avanzar en sus propuestas domésticas. El Movimiento Moderno se propuso solucionar los problemas de la vivienda y de una Europa en reconstrucción pero se exigía además ser capaz de aportar una visión propositiva de la vida moderna. No se trataba únicamente de resolver los problemas ya existentes sino que además había la necesidad autoimpuesta de anticipar la domesticidad del futuro. Para ello sus viviendas al completo, mueble e inmueble, debían de presentarse bajo esa nueva imagen. El manifiesto fundacional de la Deustcher Werkbund extendía el radio de acción del nuevo arquitecto desde la construcción de las ciudades a los cojines del sofá. Este mobiliario tenía la compleja misión de condensar sintéticamente todos esos ideales que la modernidad había traído consigo: abstracción, higiene, fascinación maquínica, confianza positivista en la ciencia o la expresión material optimizada. Objetos de la vida moderna, en palabras de Le Corbusier, susceptibles de suscitar un estado de vida moderno. Pocas sillas en la historia del diseño habrán acarreado tanta polémica y tanta disputa por su autoría como la sillas voladas de tubo de acero en sus diferentes versiones. Para entenderlo situémonos en el año 1927 a las puertas de la exposición "Die Wohnung" ("La vivienda") organizada por los maestros de la Bauhaus y dirigida por Mies van der Rohe en la ladera Weissenhof de Stuttgart. Muchos nombres célebres de la arquitectura mostraron en esa ocasión su personal propuesta para la vivienda moderna y los objetos que la habitan. Entre ellos los muebles con tubo de acero fueron una presencia constante en la exposición pero hubo una pieza que destacó sobre todas las demás por su novedad y audacia. La pieza en cuestión era el modelo de silla volada, esto es, sin apoyos posteriores y cuya rigidez estaba conferida al esfuerzo solidario de la estructura continua de tubo de acero y que terminaría por convertirse en el cruce de caminos de tres figuras de la disciplina arquitectónica: Marcel Breuer, Mies van der Rohe y Mart Stam. Cada uno de ellos desarrolló su propio modelo de silla volada en sus versiones MR por parte de Mies, L&C Arnold de Stam y el posterior modelo BR 33 de Marcel Breuer. Los tres, en algún momento de su vida reclamaron de uno u otro modo su autoría como objetos que les pertenecían intelectualmente. Estas sillas se convirtieron en la expresión máxima de uno de los ansiados anhelos de la modernidad, la propia materialidad del acero, en su versión optimizada, era la que había derivado en una forma completamente nueva de un objeto cotidiano y cuyo tipo estaba ya totalmente asumido. Los nuevos materiales y las nuevas formas de hacer habían irrumpido hasta en los utensilios domésticos, y habían sido capaces de reformularlos. El punto de partida para esta investigación es precisamente esa coincidencia de tres figuras de la arquitectura moderna, los tres de formación artesanal, en un mismo modelo de silla y en una misma fecha. Tres arquitectos que se habían encargado de asegurar que el movimiento moderno no reconocía problemas formales sino solamente de construcción, iban a coincidir en el mismo tiempo y lugar, precisamente en una misma forma, como si tal coincidencia hubiera sido producto de una voluntad de época. Sin embargo el interés de este estudio no radica en una indagación sobre la autoría sino sobre cómo un mismo objeto resulta ser propositivo e interesante en campos muy diversos y la forma en que cada uno lo hace suyo incorporándolo a su propia investigación proyectual. La silla, más allá de ser un objeto de diseño exclusivamente, trasciende su propia escala para situarse inmersa en un proceso de búsqueda y exploración a nivel conceptual, formal, constructivo y estructural en la arquitectura cada uno de ellos. En un momento en que el oficio del arquitecto está siendo intensamente redefinido considero especialmente pertinente esta investigación, que en definitiva versa sobre la forma distintiva en que el pensamiento arquitectónico es capaz de proyectarse sobre cualquier disciplina para reformularla. ABSTRACT The nineteenth century was a century dedicated to the great public buildings; theaters, schools or museums. However the architecture in the twentieth century was devoted to the study of housing. All uses and typologies were heavily revised but the focus of all efforts and true beginning of modern architecture was housing. From these beginnings all modern precepts were applied to the various programs. Nikolaus Pevsner points to William Morris as the first modern architect precisely because he understood that a truly social art in line with its time and the society it serves must deal with social concerns at that time. With the new housing situation at the center of disciplinary concerns furniture took on a new prominence. At an advanced stage of his career Marcel Breuer observed partly with curiosity, partly with irony how modern furniture had been promoted not by furniture designers but by architects. The answer is given by Le Corbusier in one of his lectures of 1931 collected in Precisions when he pointed the reformulation of furniture as the "Gordian knot" for the renewal of modern plan resolution. Modernism had been forced to confront this issue in order to advance their domestic approaches. Modernism not only put forward a solution to the problems of housing and a Europe under reconstruction but is also needed to be able to contribute to an exciting vision of modern life. Not only did solve existing problems but also it had the self-imposed necessity of anticipating future domesticity and to do their houses full, movable and immovable, they should be submitted under this new image. The founding manifesto of the Deutsche Werkbund extended the scope of the new architect from building cities to the couch cushions. This furniture had the complex mission of synthetically condensing all the ideals of modernity had brought with it: abstraction, hygiene, mechanization, positivist confidence in science or material expression. Objects of modern life, in words of Le Corbusier, were likely to give rise a state of modern life. Few chairs in design history have resulted in so much controversy and so much dispute over their invention as the various versions of cantilevered tubular steel chairs. To understand this let us place ourselves in 1927 at the gates of the exhibition "Die Wohnung" ("Housing") organized by the teachers of the Bauhaus and directed by Mies van der Rohe in Stuttgart Weissenhoflung. Many famous names in architecture at that time showed their personal proposals for modern housing and the objects that inhabit them. Amongst these objects, the steel tube furniture was a constant presence at the exhibition but there was a piece so audacious that it stood out from all the others. This piece in question was the cantilever model chair, that is, which had no further rear support and whose rigidity was attributed to the solidity of its continues structure of steel tube. This piece would eventually become the crossroads of three very different personalities: Mart Stam, Marcel Breuer and Mies van der Rohe. Each of them developed their own model of cantilevered chair in different versions; The MR model developed by Mies van der Rohe, the L&C by Arnold Stam and a later model BR 33 by Marcel Breuer, and the three, at some point in their lives demanded the authorship of its invention as objects that belonged to them intellectually. These chairs epitomized one of the coveted objects of modernity, steel material in its optimized version, was what had led to a completely new form of an everyday object whose this type was fully adopted on board in design. New materials and production methods had burst into world of household objects, and had been able to reformulate their design. The bold design then became a dark object of controversy. The starting point for this doctoral thesis is the concurrent invention of the same model of chair by three different figures of modern architecture. These three architects, who were responsible for ensuring that the modern movement considered construction rather than form as the main design consideration, were working in the same place and at the same point in time. It was almost as if these three architects were shaped by the culture of the time (Zeitgeist). However the focus of this study lies not in an investigation of responsibility of ownership but in the investigation fo how the same object can turn out to be purposeful and interesting in many different fields and the way in which each researcher makes it his own by developing his own project research. 1927, the year of their meeting, was a initiatory year in the career of our players. The chair, beyond being only a design object transcended its own scale and became immersed in a process of research and development on a conceptual, formal, structural and constructive level in the architectural approach of each of the architects. At a time when the role of the architect is being redefined intensely I consider this research, which ultimately concerns the distinctive way the architectural thought can be projected onto and reformulate any discipline, to be particularly relevant.

An evaluation of the performance of cDNA microarrays for detecting changes in global mRNA expression

The cDNA microarray is one technological approach that has the potential to accurately measure changes in global mRNA expression levels. We report an assessment of an optimized cDNA microarray platform to generate accurate, precise and reliable data consistent with the objective of using microarrays as an acquisition platform to populate gene expression databases. The study design consisted of two independent evaluations with 70 arrays from two different manufactured lots and used three human tissue sources as samples: placenta, brain and heart. Overall signal response was linear over three orders of magnitude and the sensitivity for any element was estimated to be 2 pg mRNA. The calculated coefficient of variation for differential expression for all non-differentiated elements was 12–14% across the entire signal range and did not vary with array batch or tissue source. The minimum detectable fold change for differential expression was 1.4. Accuracy, in terms of bias (observed minus expected differential expression ratio), was less than 1 part in 10 000 for all non-differentiated elements. The results presented in this report demonstrate the reproducible performance of the cDNA microarray technology platform and the methods provide a useful framework for evaluating other technologies that monitor changes in global mRNA expression.

Molecular identity and cellular distribution of advanced glycation endproduct receptors: relationship of p60 to OST-48 and p90 to 80K-H membrane proteins.

Advanced glycation endproducts (AGEs) are derivatives of nonenzymatic reactions between sugars and protein or lipids, and together with AGE-specific receptors are involved in numerous pathogenic processes associated with aging and hyperglycemia. Two of the known AGE-binding proteins isolated from rat liver membranes, p60 and p90, have been partially sequenced. We now report that the N-terminal sequence of p60 exhibits 95% identity to OST-48, a 48-kDa member of the oligosaccharyltransferase complex found in microsomal membranes, while sequence analysis of p90 revealed 73% and 85% identity to the N-terminal and internal sequences, respectively, of human 80K-H, a 80- to 87-kDa protein substrate for protein kinase C. AGE-ligand and Western analyses of purified oligosaccharyltransferase complex, enriched rough endoplasmic reticulum, smooth endoplasmic reticulum, and plasma membranes from rat liver or RAW 264.7 macrophages yielded a single protein of approximately 50 kDa recognized by both anti-p60 and anti-OST-48 antibodies, and also exhibited AGE-specific binding. Immunoprecipitated OST-48 from rat rough endoplasmic reticulum fractions exhibited both AGE binding and immunoreactivity to an anti-p60 antibody. Immune IgG raised to recombinant OST-48 and 80K-H inhibited binding of AGE-bovine serum albumin to cell membranes in a dose-dependent manner. Immunostaining and flow cytometry demonstrated the surface expression of OST-48 and 80K-H on numerous cell types and tissues, including mononuclear, endothelial, renal, and brain neuronal and glial cells. We conclude that the AGE receptor components p60 and p90 are identical to OST-48, and 80K-H, respectively, and that they together contribute to the processing of AGEs from extra- and intracellular compartments and in the cellular responses associated with these pathogenic substances.

Broadening the Scope of Ethnic Identity: A Social Sustainability Solution for Pan African Communities through Ethnically Relevant Educational Programming

This conceptual study explores ethnic identity development theory in order to argue that ethnic identity development education is a means of developing broad senses of community in the African Diaspora that expand beyond a tribal, local, familial level. This study suggests that the broadening of community understanding would contribute to establishing social sustainability on regional, national and international levels within the Pan African community. Establishing such social sustainability would have direct effects on the areas of economic and environmental sustainability. One of the goals of this project is to offer suggestions for ethnically relevant education that can develop social sustainability in several places throughout the Diaspora, such as in Nigeria where ethnic conflicts are a contemporary concern.

Time-motion analysis in women’s team handball: importance of aerobic performance

Women’s handball is a sport, which has seen an accelerated development over the last decade. Data on movement patterns in combination with physiological demands are nearly nonexistent in the literature. The aim of this study was twofold: first, to analyze the horizontal movement pattern, including the sprint acceleration profiles, of individual female elite handball players and the corresponding heart rates (HRs) during a match and secondly to determine underlying correlations with individual aerobic performance. Players from one German First League team (n = 11) and the Norwegian National Team (n = 14) were studied during one match using the Sagit system for movement analysis and Polar HR monitoring for analysis of physiological demands. Mean HR during the match was 86 % of maximum HR (HRmax). With the exception of the goalkeepers (GKs, 78 % of HRmax), no position-specific differences could be detected. Total distance covered during the match was 4614 m (2066 m in GKs and 5251 m in field players (FPs)). Total distance consisted of 9.2 % sprinting, 26.7 % fast running, 28.8 % slow running, and 35.5 % walking. Mean velocity varied between 1.9 km/h (0.52 m/s) (GKs) and 4.2 km/h (1.17 m/s) (FPs, no position effect). Field players with a higher level of maximum oxygen uptake (V̇O2max) executed run activities with a higher velocity but comparable percentage of HRmax as compared to players with lower aerobic performance, independent of FP position. Acceleration profile depended on aerobic performance and the field player’s position. In conclusion, a high V̇O2max appears to be important in top-level international women’s handball. Sprint and endurance training should be conducted according to the specific demands of the player’s position.

Electrochemical analysis of the performance of carbon supported Pd nanoparticles for direct formic acid fuel cells: from gold supported electrodes to catalyst-coated membranes

In this work carbon supported Pd nanoparticles were prepared and used as electrocatalysts for formic acid electrooxidation fuel cells. The influence of some relevant parameters such as the nominal Pt loading, the Nafion/total solids ratio as well as the Pd loading towards formic acid electrooxidation was evaluated using gold supported catalytic layer electrodes which were prepared using a similar methodology to that employed in the preparation of conventional catalyst coated membranes (CCM). The results obtained show that, for constant Pd loading, the nominal Pd loading and the Nafion percentage on the catalytic layer do not play an important role on the resulting electrocatalytic properties. The main parameter affecting the electrocatalytic activity of the electrodes seems to be the Pd loading, although the resulting activity is not directly proportional to the increased Pd loading. Thus, whereas the Pd loading is multiplied by a factor of 10, the activity is only twice which evidences an important decrease in the Pd utilization. In fact, the results obtained suggest the active layer is the outer one being clearly independent of the catalytic layer thickness. Finally, catalyst coated membranes with Pd catalyst loadings of 0.1, 0.5 and 1.2 mg cm-2 were also tested in a breathing direct formic acid fuel cell.

A Computational Model of the Belief System Under the Scope of Social Communication

This paper presents an approach to the belief system based on a computational framework in three levels: first, the logic level with the definition of binary local rules, second, the arithmetic level with the definition of recursive functions and finally the behavioural level with the definition of a recursive construction pattern. Social communication is achieved when different beliefs are expressed, modified, propagated and shared through social nets. This approach is useful to mimic the belief system because the defined functions provide different ways to process the same incoming information as well as a means to propagate it. Our model also provides a means to cross different beliefs so, any incoming information can be processed many times by the same or different functions as it occurs is social nets.

Fitting of a New Design of Full Scleral Contact Lens in Advanced Keratoconus with Previous Implantation of Intracorneal Ring Segments

This case report reports the visual rehabilitation obtained with the fitting of a new design of full scleral contact lens (ICD 16.5 contact lens, Paragon Vision Sciences, distributed by Lenticon, Madrid, Spain) in a cornea with advanced keratoconus and previous implantation of intracorneal ring segment with a very limited effect. This eye had a refraction of –3.00 × 55° cylinder, providing a visual acuity of 0.5 LogMAR. The topographic pattern was very irregular with the presence of a significant central protrusion and a significant central corneal thinning. Some previous unsuccessful fittings have been performed with corneal and corneal-scleral lenses. A comfortable wearing was achieved with a fully scleral contact lens of 4600 μm of sagittal height, optical power of –11.25 D, and providing an apical clearance of 196 μm. A visual acuity of 0.0 LogMAR combined with a relevant aberrometric improvement was achieved with this contact lens. The patient was completely satisfied with the fitting. The result was maintained during 1 year after the fitting. Full scleral lenses are then able to provide comfortable wear and a significant increase in visual acuity combined with a significant improvement in the visual quality in eyes with advanced keratoconus.

The Organizational Tasks of High-Performance Gymnastic Coaches

The purpose of this study was to report the knowledge used by expert high performance gymnastic coaches in the organization of training and competition. In-depth interviews were conducted with 9 coaches who worked with male gymnasts and 8 coaches who worked with female gymnasts. Qualitative analyses showed that coaches of males and coaches of females planned training similarly, except that coaches of females appeared to emphasize esthetic and nutritional issues to a greater extent. Coaches of males revealed more concerns about the organization of gymnasts' physical conditioning. Analysis indicated that expert gymnastic coaches of males and females are constantly involved in dynamic social interactions with gymnasts, parents, and assistant coaches. Many areas of coaches' organizational work, such as dealing with the athletes' personal concerns and working with parents, are not part of the structure of coaches' training programs and emerged as crucial tasks of expert gymnastic coaches for developing elite gymnasts.

The Knowledge of High-Performance Gymnastic Coaches : Competition and Training Considerations

The purpose of this study is to report the knowledge used in training and competition by 17 expert high-performance gymnastic coaches. A qualitative research methodology was used to collect and inductively analyze the data. The knowledge elicited for the competition component was categorized as competition site, competition floor, and trial competitions. These categories indicated that the coaches are minimally involved with the gymnasts in competition. The knowledge of the coaches elicited within the training component were categorized as coach involvement in training, intervention style, technical skills, mental skills, and simulation. Properties of these categories that were extensively discussed by the expert coaches, such as teaching progressions, being supportive, and helping athletes to deal with stress,are consistent with the literature on coaching and on sport psychology. Other aspects considered important in the sport psychology literature, such as developing concentration skills, were not discussed as thoroughly by the expert coaches.