A Packet/Frame sync detector based on statistical mode with application to wireless-USB

Wireless Personal Area Networks (WPANs) are offering high data rates suitable for interconnecting high bandwidth personal consumer devices (Wireless HD streaming, Wireless-USB and Bluetooth EDR). ECMA-368 is the Physical (PHY) and Media Access Control (MAC) backbone of many of these wireless devices. WPAN devices tend to operate in an ad-hoc based network and therefore it is important to successfully latch onto the network and become part of one of the available piconets. This paper presents a new algorithm for detecting the Packet/Fame Sync (PFS) signal in ECMA-368 to identify piconets and aid symbol timing. The algorithm is based on correlating the received PFS symbols with the expected locally stored symbols over the 24 or 12 PFS symbols, but selecting the likely TFC based on the highest statistical mode from the 24 or 12 best correlation results. The results are very favorable showing an improvement margin in the order of 11.5dB in reference sensitivity tests between the required performance using this algorithm and the performance of comparable systems.

Dual carrier modulation demapping methods and performances for wireless USB

Dual Carrier Modulation (DCM) was chosen as the higher data rate modulation scheme for MB-OFDM (Multiband Orthogonal Frequency Division Multiplexing) in the UWB (Ultra-Wide Band) radio platform ECMA-368. ECMA-368 has been chosen as the physical implementation for high data rate Wireless USB (W-USB) and Bluetooth 3.0. In this paper, different demapping methods for the DCM demapper are presented, being Soft Bit, Maximum Likely (ML) Soft Bit and Log Likelihood Ratio (LLR). Frequency diversity and Channel State Information (CSI) are further techniques to enhance demapping methods. The system performance for those DCM demapping methods simulated in realistic multi-path environments are provided and compared.

Improving CS-4 user data rate in GPRS enabled devices by using a BLER co-processor

The General Packet Radio Service (GPRS) was developed to allow packet data to be transported efficiently over an existing circuit switched radio network. The main applications for GPRS are in transporting IP datagram’s from the user’s mobile Internet browser to and from the Internet, or in telemetry equipment. A simple Error Detection and Correction (EDC) scheme to improve the GPRS Block Error Rate (BLER) performance is presented, particularly for coding scheme 4 (CS-4), however gains in other coding schemes are seen. For every GPRS radio block that is corrected by the EDC scheme, the block does not need to be retransmitted releasing bandwidth in the channel, improving throughput and the user’s application data rate. As GPRS requires intensive processing in the baseband, a viable hardware solution for a GPRS BLER co-processor is discussed that has been currently implemented in a Field Programmable Gate Array (FPGA) and presented in this paper.

Knowledge transfer processes in PFI/PPP: critical success factors

Successful knowledge transfer is an important process which requires continuous improvement in today’s knowledge-intensive economy. However, improving knowledge transfer processes represents a challenge for construction practitioners due to the complexity of knowledge acquisition, codification and sharing. Although knowledge transfer is context based, understanding the critical success factors can lead to improvements in the transfer process. This paper seeks to identify and evaluate the most significant critical factors for improving knowledge transfer processes in Public Private Partnerships/Private Finance Initiatives (PPP/PFI) projects. Drawing upon a questionnaire survey of 52 construction firms located in the UK, data is analysed using Severity Index (SI) and Coefficient of Variation (COV), to examine and identify these factors in PPP/PFI schemes. The findings suggest that a supportive leadership, participation/commitment from the relevant parties, and good communication between the relevant parties are crucial to improving knowledge transfer processes in PFI schemes. Practitioners, managers and researchers can use the findings to efficiently design performance measures for analysing and improving knowledge transfer processes.

L1 transfer in the acquisition of manner and path in Spanish by native speakers of English

In this article the authors argue that L1 transfer from English is not only important in the early stages of L2 acquisition of Spanish, but remains influential in later stages if there is not enough positive evidence for the learners to progress in their development (Lefebvre, White, & Jourdan, 2006). The findings are based on analyses of path and manner of movement in stories told by British students of Spanish (N = 68) of three different proficiency levels. Verbs that conflate motion and path, on the one hand, are mastered early, possibly because the existence of Latinate path verbs, such as enter and ascend in English, facilitate their early acquisition by British learners of Spanish. Contrary to the findings of Cadierno (2004) and Cadierno and Ruiz (2006), the encoding of manner, in particular in boundary crossing contexts, seems to pose enormous difficulties, even among students who had been abroad on a placement in a Spanish-speaking country prior to the data collection. An analysis of the frequency of manner verbs in Spanish corpora shows that one of the key reasons why students struggle with manner is that manner verbs are so infrequent in Spanish. The authors claim that scarce positive evidence in the language exposed to and little or no negative evidence are responsible for the long-lasting effect of transfer on the expression of manner.

Transfer of conceptualisation patterns in bilinguals: the construal of motion events in Turkish and German

We test Slobin's (2003) Thinking-for-Speaking hypothesis on data from different groups of Turkish-German bilinguals, those living in Germany and those who have returned to Germany.

A complete atomistic model of molten polyethylene from neutron scattering data: a new methodology for polymer structure

A new approach to the study of the local organization in amorphous polymer materials is presented. The method couples neutron diffraction experiments that explore the structure on the spatial scale 1–20 Å with the reverse Monte Carlo fitting procedure to predict structures that accurately represent the experimental scattering results over the whole momentum transfer range explored. Molecular mechanics and molecular dynamics techniques are also used to produce atomistic models independently from any experimental input, thereby providing a test of the viability of the reverse Monte Carlo method in generating realistic models for amorphous polymeric systems. An analysis of the obtained models in terms of single chain properties and of orientational correlations between chain segments is presented. We show the viability of the method with data from molten polyethylene. The analysis derives a model with average C-C and C-H bond lengths of 1.55 Å and 1.1 Å respectively, average backbone valence angle of 112, a torsional angle distribution characterized by a fraction of trans conformers of 0.67 and, finally, a weak interchain orientational correlation at around 4 Å.

An Earth Observation Land Data Assimilation System (EO-LDAS)

Current methods for estimating vegetation parameters are generally sub-optimal in the way they exploit information and do not generally consider uncertainties. We look forward to a future where operational dataassimilation schemes improve estimates by tracking land surface processes and exploiting multiple types of observations. Dataassimilation schemes seek to combine observations and models in a statistically optimal way taking into account uncertainty in both, but have not yet been much exploited in this area. The EO-LDAS scheme and prototype, developed under ESA funding, is designed to exploit the anticipated wealth of data that will be available under GMES missions, such as the Sentinel family of satellites, to provide improved mapping of land surface biophysical parameters. This paper describes the EO-LDAS implementation, and explores some of its core functionality. EO-LDAS is a weak constraint variational dataassimilationsystem. The prototype provides a mechanism for constraint based on a prior estimate of the state vector, a linear dynamic model, and EarthObservationdata (top-of-canopy reflectance here). The observation operator is a non-linear optical radiative transfer model for a vegetation canopy with a soil lower boundary, operating over the range 400 to 2500 nm. Adjoint codes for all model and operator components are provided in the prototype by automatic differentiation of the computer codes. In this paper, EO-LDAS is applied to the problem of daily estimation of six of the parameters controlling the radiative transfer operator over the course of a year (> 2000 state vector elements). Zero and first order process model constraints are implemented and explored as the dynamic model. The assimilation estimates all state vector elements simultaneously. This is performed in the context of a typical Sentinel-2 MSI operating scenario, using synthetic MSI observations simulated with the observation operator, with uncertainties typical of those achieved by optical sensors supposed for the data. The experiments consider a baseline state vector estimation case where dynamic constraints are applied, and assess the impact of dynamic constraints on the a posteriori uncertainties. The results demonstrate that reductions in uncertainty by a factor of up to two might be obtained by applying the sorts of dynamic constraints used here. The hyperparameter (dynamic model uncertainty) required to control the assimilation are estimated by a cross-validation exercise. The result of the assimilation is seen to be robust to missing observations with quite large data gaps.

Pocket data mining: towards collaborative data mining in mobile computing environments

Pocket Data Mining (PDM) is our new term describing collaborative mining of streaming data in mobile and distributed computing environments. With sheer amounts of data streams are now available for subscription on our smart mobile phones, the potential of using this data for decision making using data stream mining techniques has now been achievable owing to the increasing power of these handheld devices. Wireless communication among these devices using Bluetooth and WiFi technologies has opened the door wide for collaborative mining among the mobile devices within the same range that are running data mining techniques targeting the same application. This paper proposes a new architecture that we have prototyped for realizing the significant applications in this area. We have proposed using mobile software agents in this application for several reasons. Most importantly the autonomic intelligent behaviour of the agent technology has been the driving force for using it in this application. Other efficiency reasons are discussed in details in this paper. Experimental results showing the feasibility of the proposed architecture are presented and discussed.

P-found: grid-enabling distributed repositories of protein folding and unfolding simulations for data mining

The P-found protein folding and unfolding simulation repository is designed to allow scientists to perform data mining and other analyses across large, distributed simulation data sets. There are two storage components in P-found: a primary repository of simulation data that is used to populate the second component, and a data warehouse that contains important molecular properties. These properties may be used for data mining studies. Here we demonstrate how grid technologies can support multiple, distributed P-found installations. In particular, we look at two aspects: firstly, how grid data management technologies can be used to access the distributed data warehouses; and secondly, how the grid can be used to transfer analysis programs to the primary repositories — this is an important and challenging aspect of P-found, due to the large data volumes involved and the desire of scientists to maintain control of their own data. The grid technologies we are developing with the P-found system will allow new large data sets of protein folding simulations to be accessed and analysed in novel ways, with significant potential for enabling scientific discovery.

File Transfer Protocol

The discourse surrounding the virtual has moved away from the utopian thinking accompanying the rise of the Internet in the 1990s. The Cyber-gurus of the last decades promised a technotopia removed from materiality and the confines of the flesh and the built environment, a liberation from old institutions and power structures. But since then, the virtual has grown into a distinct yet related sphere of cultural and political production that both parallels and occasionally flows over into the old world of material objects. The strict dichotomy of matter and digital purity has been replaced more recently with a more complex model where both the world of stuff and the world of knowledge support, resist and at the same time contain each other. Online social networks amplify and extend existing ones; other cultural interfaces like youtube have not replaced the communal experience of watching moving images in a semi-public space (the cinema) or the semi-private space (the family living room). Rather the experience of viewing is very much about sharing and communicating, offering interpretations and comments. Many of the web’s strongest entities (Amazon, eBay, Gumtree etc.) sit exactly at this juncture of applying tools taken from the knowledge management industry to organize the chaos of the material world along (post-)Fordist rationality. Since the early 1990s there have been many artistic and curatorial attempts to use the Internet as a platform of producing and exhibiting art, but a lot of these were reluctant to let go of the fantasy of digital freedom. Storage Room collapses the binary opposition of real and virtual space by using online data storage as a conduit for IRL art production. The artworks here will not be available for viewing online in a 'screen' environment but only as part of a downloadable package with the intention that the exhibition could be displayed (in a physical space) by any interested party and realised as ambitiously or minimally as the downloader wishes, based on their means. The artists will therefore also supply a set of instructions for the physical installation of the work alongside the digital files. In response to this curatorial initiative, File Transfer Protocol invites seven UK based artists to produce digital art for a physical environment, addressing the intersection between the virtual and the material. The files range from sound, video, digital prints and net art, blueprints for an action to take place, something to be made, a conceptual text piece, etc. About the works and artists: Polly Fibre is the pseudonym of London-based artist Christine Ellison. Ellison creates live music using domestic devices such as sewing machines, irons and slide projectors. Her costumes and stage sets propose a physical manifestation of the virtual space that is created inside software like Photoshop. For this exhibition, Polly Fibre invites the audience to create a musical composition using a pair of amplified scissors and a turntable. http://www.pollyfibre.com John Russell, a founding member of 1990s art group Bank, is an artist, curator and writer who explores in his work the contemporary political conditions of the work of art. In his digital print, Russell collages together visual representations of abstract philosophical ideas and transforms them into a post apocalyptic landscape that is complex and banal at the same time. www.john-russell.org The work of Bristol based artist Jem Nobel opens up a dialogue between the contemporary and the legacy of 20th century conceptual art around questions of collectivism and participation, authorship and individualism. His print SPACE concretizes the representation of the most common piece of Unicode: the vacant space between words. In this way, the gap itself turns from invisible cipher to sign. www.jemnoble.com Annabel Frearson is rewriting Mary Shelley's Frankenstein using all and only the words from the original text. Frankenstein 2, or the Monster of Main Stream, is read in parts by different performers, embodying the psychotic character of the protagonist, a mongrel hybrid of used language. www.annabelfrearson.com Darren Banks uses fragments of effect laden Holywood films to create an impossible space. The fictitious parts don't add up to a convincing material reality, leaving the viewer with a failed amalgamation of simulations of sophisticated technologies. www.darrenbanks.co.uk FIELDCLUB is collaboration between artist Paul Chaney and researcher Kenna Hernly. Chaney and Hernly developed together a project that critically examines various proposals for the management of sustainable ecological systems. Their FIELDMACHINE invites the public to design an ideal agricultural field. By playing with different types of crops that are found in the south west of England, it is possible for the user, for example, to create a balanced, but protein poor, diet or to simply decide to 'get rid' of half the population. The meeting point of the Platonic field and it physical consequences, generates a geometric abstraction that investigates the relationship between modernist utopianism and contemporary actuality. www.fieldclub.co.uk Pil and Galia Kollectiv, who have also curated the exhibition are London-based artists and run the xero, kline & coma gallery. Here they present a dialogue between two computers. The conversation opens with a simple text book problem in business studies. But gradually the language, mimicking the application of game theory in the business sector, becomes more abstract. The two interlocutors become adversaries trapped forever in a competition without winners. www.kollectiv.co.uk

L3 syntactic transfer selectivity and typological determinacy: the typological primacy model

The present article addresses the following question: what variables condition syntactic transfer? Evidence is provided in support of the position that third language (L3) transfer is selective, whereby, at least under certain conditions, it is driven by the typological proximity of the target L3 measured against the other previously acquired linguistic systems (cf. Rothman and Cabrelli Amaro, 2007, 2010; Rothman, 2010; Montrul et al., 2011). To show this, we compare data in the domain of adjectival interpretation between successful first language (L1) Italian learners of English as a second language (L2) at the low to intermediate proficiency level of L3 Spanish, and successful L1 English learners of L2 Spanish at the same levels for L3 Brazilian Portuguese. The data show that, irrespective of the L1 or the L2, these L3 learners demonstrate target knowledge of subtle adjectival semantic nuances obtained via noun-raising, which English lacks and the other languages share. We maintain that such knowledge is transferred to the L3 from Italian (L1) and Spanish (L2) respectively in light of important differences between the L3 learners herein compared to what is known of the L2 Spanish performance of L1 English speakers at the same level of proficiency (see, for example, Judy et al., 2008; Rothman et al., 2010). While the present data are consistent with Flynn et al.’s (2004) Cumulative Enhancement Model, we discuss why a coupling of these data with evidence from other recent L3 studies suggests necessary modifications to this model, offering in its stead the Typological Primacy Model (TPM) for multilingual transfer.

On the typological economy of syntactic transfer: word order and relative clause high/low attachment preference in L3 Brazilian Portuguese

One central question in the formal linguistic study of adult multilingual morphosyntax (i.e., L3/Ln acquisition) involves determining the role(s) the L1 and/or the L2 play(s) at the L3 initial state (e.g., Bardel & Falk, Second Language Research 23: 459–484, 2007; Falk & Bardel, Second Language Research: forthcoming; Flynn et al., The International Journal of Multilingualism 8: 3–16, 2004; Rothman, Second Language Research: forthcoming; Rothman & Cabrelli, On the initial state of L3 (Ln) acquisition: Selective or absolute transfer?: 2007; Rothman & Cabrelli Amaro, Second Language Research 26: 219–289, 2010). The present article adds to this general program, testing Rothman's (Second Language Research: forthcoming) model for L3 initial state transfer, which when relevant in light of specific language pairings, maintains that typological proximity between the languages is the most deterministic variable determining the selection of syntactic transfer. Herein, I present empirical evidence from the later part of the beginning stages of L3 Brazilian Portuguese (BP) by native speakers of English and Spanish, who have attained an advanced level of proficiency in either English or Spanish as an L2. Examining the related domains of syntactic word order and relative clause attachment preference in L3 BP, the data clearly indicate that Spanish is transferred for both experimental groups irrespective of whether it was the L1 or L2. These results are expected by Rothman's (Second Language Research: forthcoming) model, but not necessarily predicted by other current hypotheses of multilingual syntactic transfer; the implications of this are discussed.

What variables condition syntactic transfer? A look at the L3 initial state

This study investigates transfer at the third-language (L3) initial state, testing between the following possibilities: (1) the first language (L1) transfer hypothesis (an L1 effect for all adult acquisition), (2) the second language (L2) transfer hypothesis, where the L2 blocks L1 transfer (often referred to in the recent literature as the ‘L2 status factor’; Williams and Hammarberg, 1998), and (3) the Cumulative Enhancement Model (Flynn et al., 2004), which proposes selective transfer from all previous linguistic knowledge. We provide data from successful English-speaking learners of L2 Spanish at the initial state of acquiring L3 French and L3 Italian relating to properties of the Null-Subject Parameter (e.g. Chomsky, 1981; Rizzi, 1982). We compare these groups to each other, as well as to groups of English learners of L2 French and L2 Italian at the initial state, and conclude that the data are consistent with the predictions of the ‘L2 status factor’. However, we discuss an alternative possible interpretation based on (psycho)typologically-motivated transfer (borrowing from Kellerman, 1983), providing a methodology for future research in this domain to meaningfully tease apart the ‘L2 status factor’ from this alternative account.

Retrieval of sea surface temperature from space based on modeling of infrared radiative transfer: capabilities and limitations

The retrieval (estimation) of sea surface temperatures (SSTs) from space-based infrared observations is increasingly performed using retrieval coefficients derived from radiative transfer simulations of top-of-atmosphere brightness temperatures (BTs). Typically, an estimate of SST is formed from a weighted combination of BTs at a few wavelengths, plus an offset. This paper addresses two questions about the radiative transfer modeling approach to deriving these weighting and offset coefficients. How precisely specified do the coefficients need to be in order to obtain the required SST accuracy (e.g., scatter <0.3 K in week-average SST, bias <0.1 K)? And how precisely is it actually possible to specify them using current forward models? The conclusions are that weighting coefficients can be obtained with adequate precision, while the offset coefficient will often require an empirical adjustment of the order of a few tenths of a kelvin against validation data. Thus, a rational approach to defining retrieval coefficients is one of radiative transfer modeling followed by offset adjustment. The need for this approach is illustrated from experience in defining SST retrieval schemes for operational meteorological satellites. A strategy is described for obtaining the required offset adjustment, and the paper highlights some of the subtler aspects involved with reference to the example of SST retrievals from the imager on the geostationary satellite GOES-8.