976 resultados para Uniform ergodicity


Relevância:

20.00% 20.00%

Publicador:

Resumo:

In the era of evidence based medicine, proof of clinical benefits and cost-effectiveness need to be firmly based on transparent comparisons between various therapeutic alternatives. Standards for reports are a prerequisite for comparisons across reports and should reflect the patient's perspective. According standards have been successfully introduced in many fields of modern medicine, but not yet for peripheral endovascular interventions. Given the overwhelmingly increasing importance of endovascular revascularization in patients with chronic lower limb ischemia, this report provides an updated outline of the heterogeneity of current reporting practice and highlights the need for uniform reporting standards.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

An electrospray source has been developed using a novel new fluid that is both magnetic and conductive. Unlike conventional electrospray sources that required microfabricated structures to support the fluid to be electrosprayed, this new electrospray fluid utilizes the Rosensweig instability to create the structures in the magnetic fluid when an external magnetic field was applied. Application of an external electric field caused these magnetic fluid structures to spray. These fluid based structures were found to spray at a lower onset voltage than was predicted for electrospray sources with solid structures of similar geometry. These fluid based structures were also found to be resilient to damage, unlike the solid structures found in traditional electrospray sources. Further, experimental studies of magnetic fluids in non-uniform magnetic fields were conducted. The modes of Rosensweig instabilities have been studied in-depth when created by uniform magnetic fields, but little to no studies have been performed on Rosensweig instabilities formed due to non-uniform magnetic fields. The measured spacing of the cone-like structures of ferrofluid, in a non-uniform magnetic field, were found to agree with a proposed theoretical model.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Cattle in three experiments were scanned with ultrasound as feeders to measure ribeye area and thickness of fat cover to determine if cattle could be sorted into outcome groups with respect to carcass yield. Sorting the cattle into low fat cover or large ribeye groups resulted in improved carcass yield grades. There were no effects on carcass quality grades related to sorting of the cattle. Cattle with greater fat cover at the beginning of the feeding period were heavier, seemed to be more mature and had less muscle growth during the finishing period. There were no significant differences in gain among the groups, but cattle with more fat cover had poorer feed efficiency. Ultrasound seems to have potential to sort feeder cattle, but before it can be used in practice, growth curves need to be developed to predict final end points of individual cattle.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

BACKGROUND In a high proportion of patients with favorable outcome after aneurysmal subarachnoid hemorrhage (aSAH), neuropsychological deficits, depression, anxiety, and fatigue are responsible for the inability to return to their regular premorbid life and pursue their professional careers. These problems often remain unrecognized, as no recommendations concerning a standardized comprehensive assessment have yet found entry into clinical routines. METHODS To establish a nationwide standard concerning a comprehensive assessment after aSAH, representatives of all neuropsychological and neurosurgical departments of those eight Swiss centers treating acute aSAH have agreed on a common protocol. In addition, a battery of questionnaires and neuropsychological tests was selected, optimally suited to the deficits found most prevalent in aSAH patients that was available in different languages and standardized. RESULTS We propose a baseline inpatient neuropsychological screening using the Montreal Cognitive Assessment (MoCA) between days 14 and 28 after aSAH. In an outpatient setting at 3 and 12 months after bleeding, we recommend a neuropsychological examination, testing all relevant domains including attention, speed of information processing, executive functions, verbal and visual learning/memory, language, visuo-perceptual abilities, and premorbid intelligence. In addition, a detailed assessment capturing anxiety, depression, fatigue, symptoms of frontal lobe affection, and quality of life should be performed. CONCLUSIONS This standardized neuropsychological assessment will lead to a more comprehensive assessment of the patient, facilitate the detection and subsequent treatment of previously unrecognized but relevant impairments, and help to determine the incidence, characteristics, modifiable risk factors, and the clinical course of these impairments after aSAH.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Mechanical properties of human trabecular bone play an important role in age-related bone fragility and implant stability. Micro-finite element (microFE) analysis allows computing the apparent elastic properties of trabecular bone biopsies, but the results depend on the type of applied boundary conditions (BCs). In this study, 167 femoral trabecular cubic biopsies with a side length of 5.3 mm were analyzed using microFE analysis to compare their stiffness systematically with kinematic uniform boundary conditions (KUBCs) and periodicity-compatible mixed uniform boundary conditions (PMUBCs). The obtained elastic constants were then used in the volume fraction and fabric-based orthotropic Zysset-Curnier model to identify their respective model parameters. As expected, PMUBCs lead to more compliant apparent elastic properties than KUBCs, especially in shear. The differences in stiffness decreased with bone volume fraction and mean intercept length. Unlike KUBCs, PMUBCs were sensitive to heterogeneity of the biopsies. The Zysset-Curnier model predicted apparent elastic constants successfully in both cases with adjusted coefficients of determination of 0.986 for KUBCs and 0.975 for PMUBCs. The role of these boundary conditions in finite element analyses of whole bones and bone-implant systems will need to be investigated in future work.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

There are large variations in the incidence, registration methods and reported causes of sudden cardiac arrest/sudden cardiac death (SCA/SCD) in competitive and recreational athletes. A crucial question is to which degree these variations are genuine or partly due to methodological incongruities. This paper discusses the uncertainties about available data and provides comprehensive suggestions for standard definitions and a guide for uniform registration parameters of SCA/SCD. The parameters include a definition of what constitutes an 'athlete', incidence calculations, enrolment of cases, the importance of gender, ethnicity and age of the athlete, as well as the type and level of sporting activity. A precise instruction for autopsy practice in the case of a SCD of athletes is given, including the role of molecular samples and evaluation of possible doping. Rational decisions about cardiac preparticipation screening and cardiac safety at sport facilities requires increased data quality concerning incidence, aetiology and management of SCA/SCD in sports. Uniform standard registration of SCA/SCD in athletes and leisure sportsmen would be a first step towards this goal.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Welsch (Projektbearbeiter): Dienstreglements für die Nationalgarde das Tragen der Uniform, die Übergabe von Petitionen sowie die Zusammenberufung betreffend

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A two-dimensional finite element model of current flow in the front surface of a PV cell is presented. In order to validate this model we perform an experimental test. Later, particular attention is paid to the effects of non-uniform illumination in the finger direction which is typical in a linear concentrator system. Fill factor, open circuit voltage and efficiency are shown to decrease with increasing degree of non-uniform illumination. It is shown that these detrimental effects can be mitigated significantly by reoptimization of the number of front surface metallization fingers to suit the degree of non-uniformity. The behavior of current flow in the front surface of a cell operating at open circuit voltage under non-uniform illumination is discussed in detail.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The thermal annealing of amorphous tracks of nanometer-size diameter generated in lithium niobate (LiNbO3) by Bromine ions at 45 MeV, i.e., in the electronic stopping regime, has been investigated by RBS/C spectrometry in the temperature range from 250°C to 350°C. Relatively low fluences have been used (<1012 cm−2) to produce isolated tracks. However, the possible effect of track overlapping has been investigated by varying the fluence between 3×1011 cm−2 and 1012 cm−2. The annealing process follows a two-step kinetics. In a first stage (I) the track radius decreases linearly with the annealing time. It obeys an Arrhenius-type dependence on annealing temperature with activation energy around 1.5 eV. The second stage (II) operates after the track radius has decreased down to around 2.5 nm and shows a much lower radial velocity. The data for stage I appear consistent with a solid-phase epitaxial process that yields a constant recrystallization rate at the amorphous-crystalline boundary. HRTEM has been used to monitor the existence and the size of the annealed isolated tracks in the second stage. On the other hand, the thermal annealing of homogeneous (buried) amorphous layers has been investigated within the same temperature range, on samples irradiated with Fluorine at 20 MeV and fluences of ∼1014 cm−2. Optical techniques are very suitable for this case and have been used to monitor the recrystallization of the layers. The annealing process induces a displacement of the crystalline-amorphous boundary that is also linear with annealing time, and the recrystallization rates are consistent with those measured for tracks. The comparison of these data with those previously obtained for the heavily damaged (amorphous) layers produced by elastic nuclear collisions is summarily discussed.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The analytical solution to the one-dimensional absorption–conduction heat transfer problem inside a single glass pane is presented, which correctly takes into account all the relevant physical phenomena: the appearance of multiple reflections, the spectral distribution of solar radiation, the spectral dependence of optical properties, the presence of possible coatings, the non-uniform nature of radiation absorption, and the diffusion of heat by conduction across the glass pane. Additionally to the well established and known direct absorptance αe, the derived solution introduces a new spectral quantity called direct absorptance moment βe, that indicates where in the glass pane is the absorption of radiation actually taking place. The theoretical and numerical comparison of the derived solution with existing approximate thermal models for the absorption–conduction problem reveals that the latter ones work best for low-absorbing uncoated single glass panes, something not necessarily fulfilled by modern glazings.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Mersenne Twister (MT) uniform random number generators are key cores for hardware acceleration of Monte Carlo simulations. In this work, two different architectures are studied: besides the classical table-based architecture, a different architecture based on a circular buffer and especially targeting FPGAs is proposed. A 30% performance improvement has been obtained when compared to the fastest previous work. The applicability of the proposed MT architectures has been proven in a high performance Gaussian RNG.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

We consider here uniform distributed pushdown automata systems (UDPAS), namely distributed pushdown automata systems having all components identical pushdown automata. We consider here just a single protocol for activating/deactivating components, namely a component stays active as long as it can perform moves, as well as two ways of accepting the input word: by empty stacks (all components have empty stacks) or by final states (all components are in final states), when the input word is completely read. We mainly investigate the computational power of UDPAS accepting by empty stacks and a few decidability and closure properties of the families of languages they define. Some directions for further work and open problems are also discussed.