Análise de desempenho de redes de comunicação wireless em aplicações de Smart Grid

Pós-graduação em Engenharia Elétrica - FEIS

Desenvolvimento e avaliação de desempenho de um sistema de posicionamento automático para painéis fotovoltaicos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Determinação do posicionamento ótimo de apoios em pontes

This paper presents a study to determine the optimal support positions in bridges, as well as the optimal relation between the spans of beams, aiming both the reduction and the unifirmization of the efforts in these structures. The mathematical problem is formulated in order to minimize the maximum bending moments, taking the coordinate of each internal support as design variable. To take into account possible location limitations, size constraints are also considered in the formulation. The software developed based on this study determines the efforts in each support for load shifting along the structure by the usage of the Displacement Method, and the optimization is performed with a mathematical programming technique. The structures analyzed from the computational implementation of the idealized model point to the validation and efficiency of the proposed procedure.

Suscetibilidade magnética e análise de incertezas em mapeamento de solos

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Produção e qualidade da cana-de-açúcar em diferentes formas do relevo

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Funções penalidade para o tratamento das variáveis discretas do problema de fluxo de potência ótimo reativo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Análise do perfil de dureza e microestrutura de um aço forjado AISI A2 submetido a tratamento térmico com resfriamento em água

Due to the large use of steel in several processes around the world, there is the increasingly concern to find new materials and/or optimization and improvement of the processes, as the need to reduce the cost and a productivity increase in the primary industry, such as the siderurgy. The rolling is the most used mechanical process in the world and therefore is required the development of new tools in high volume and with optimum characteristics to support the market demand. Forged rolls used are for rolling. These rolls have heat treatment that has the purpose to achieve the appropriated mechanical properties to support the variables of the rolling process. The objective of this work is to analyze the hardness profile and the microstructure a tool steel similar to AISI A2, forged in an opened die process and submitted to heat treatment with water-cooling. The results allowed plotting a hardness profile and performing a microstructure analysis, and whereby to confirm that the heat treatment is not a quenching, but it is a material beneficiation by the hardening of superficial layer, since there is no martensitic microstructure. Therefore, this paper provides the support to future studies about the possibility to perform enhancements in this thermal heat made in the rolls produced at Gerdau Plant in Pindamonhangaba

A Porpoise, Australophocaena dioptrica, Previously Identified As Phocoena spinipinnis, From Heard Island

Guiler, Burton and Gales (1987) reported a cranium (Tasmanian Museum No. A141 1) they identified as belonging to Burmeister’s porpoise, Phocoena spinipinnis Burmeister, 1865 from Heard Island (53°S 73°30’E). They noted that P. spinipinnis was previously known only from the cold-temperate coastal waters of South America and claimed that this cranium was evidence that the species has a much wider distribution than previously known. We have examined the photographs and details of their specimen and re-identify it here as Australophocaena dioptrica (Lahille, 1912) (family Phocoenidae). Barnes (1985) listed several features that distinguish the skulls of species within the subfamily Phocoenoidinae (including A. dioptrica) from those species within the Phocoeninae (including Phocoena spp.). Features that distinguish A. dioptrica from P. spinipinnis, dearly visible in the published photographs of the cranium from Heard Island, include: a relatively small, oval-shaped temporal fossa; an elevated, high-vaulted braincase that slopes abruptly onto the narial region; relatively large, high and convex premaxillary bosses; dorso-ventrally expanded zygomatic process of the squamosal; short and antetoposteriorly expanded postorbital process of the fronds; and maxillae extendmg nearly to the dorsal margin of the supraoccipital on the top of the skull. In all these features, the Heard Island specimen conforms with those of A. dioptrica. Crania of A. dioptrica have been illustrated by Hamilton (1941), Norris and McFarland (1958), Brownell (1975), Fordyce et al. (1984), and Barnes (1985). Crania of P. spinipinnis have been illustrated by Norris and McFarland (1958) and Brownell and Praderi (1984).

Análise do perfil de dureza e microestrutura de um aço forjado AISI A2 submetido a tratamento térmico com resfriamento em água

Due to the large use of steel in several processes around the world, there is the increasingly concern to find new materials and/or optimization and improvement of the processes, as the need to reduce the cost and a productivity increase in the primary industry, such as the siderurgy. The rolling is the most used mechanical process in the world and therefore is required the development of new tools in high volume and with optimum characteristics to support the market demand. Forged rolls used are for rolling. These rolls have heat treatment that has the purpose to achieve the appropriated mechanical properties to support the variables of the rolling process. The objective of this work is to analyze the hardness profile and the microstructure a tool steel similar to AISI A2, forged in an opened die process and submitted to heat treatment with water-cooling. The results allowed plotting a hardness profile and performing a microstructure analysis, and whereby to confirm that the heat treatment is not a quenching, but it is a material beneficiation by the hardening of superficial layer, since there is no martensitic microstructure. Therefore, this paper provides the support to future studies about the possibility to perform enhancements in this thermal heat made in the rolls produced at Gerdau Plant in Pindamonhangaba

New materials for electrochemiluminescence

The study of electrochemiluminescence (ECL) involves photophysical and electrochemical aspects. Excited states are populated by an electrical stimulus. The most important applications are in the diagnostic field where a number of different biologically-relevant molecules (e.g. proteins and nucleic acids) can be recognized and quantified with a sensitivity and specificity previously not reachable. As a matter of fact the electrochemistry, differently to the classic techniques as fluorescence and chemiluminescence, allows to control the excited state generation spatially and temporally. The two research visits into A. J. Bard electrochemistry laboratories were priceless. Dr. Bard has been one of ECL pioneers, the first to introduce the technique and the one who discovered in 1972 the surprising emission of Ru(bpy)3 2+. I consider necessary to thank by now my supervisors Massimo and Francesco for their help and for giving me the great opportunity to know this unique science man that made me feel enthusiastic. I will never be grateful enough… Considering that the experimental techniques of ECL did not changed significantly in these last years the most convenient research direction has been the developing of materials with new or improved properties. In Chapter I the basics concepts and mechanisms of ECL are introduced so that the successive experiments can be easily understood. In the final paragraph the scopes of the thesis are briefly described. In Chapter II by starting from ECL experimental apparatus of Dr. Bard’s laboratories the design, assembly and preliminary tests of the new Bologna instrument are carefully described. The instrument assembly required to work hard but resulted in the introduction of the new technique in our labs by allowing the continuation of the ECL studies began in Texas. In Chapter III are described the results of electrochemical and ECL studies performed on new synthesized Ru(II) complexes containing tetrazolate based ligands. ECL emission has been investigated in solution and in solid thin films. The effect of the chemical protonation of the tetrazolate ring on ECL emission has been also investigated evidencing the possibility of a catalytic effect (generation of molecular hydrogen) of one of the complexes in organic media. Finally, after a series of preliminary studies on ECL emission in acqueous buffers, the direct interaction with calf thymus DNA of some complexes has been tested by ECL and photoluminescence (PL) titration. In Chapter IV different Ir(III) complexes have been characterized electrochemically and photophysically (ECL and PL). Some complexes were already well-known in literature for their high quantum efficiency whereas the remaining were new synthesized compounds containing tetrazolate based ligands analogous to those investigated in Chapt. III. During the tests on a halogenated complex was unexpectedly evidenced the possibility to follow the kinetics of an electro-induced chemical reaction by using ECL signal. In the last chapter (V) the possibility to use mono-use silicon chips electrodes as ECL analitycal devices is under investigation. The chapter begins by describing the chip structure and materials then a signal reproducibility study and geometry optimization is carried on by using two different complexes. In the following paragraphs is reported in detail the synthesis of an ECL label based on Ru(bpy)3 2+ and the chip functionalization by using a lipoic acid SAM and the same label. After some preliminary characterizations (mass spectroscopy TOF) has been demonstrated that by mean of a simple and fast ECL measurement it’s possible to confirm the presence of the coupling product SAM-label into the chip with a very high sensitivity. No signal was detected from the same system by using photoluminescence.

Nuovo modello cinetostatico della caviglia umana.

The relevance of human joint models has been shown in the literature. They can help in diagnosis, in prostheses and ortheses design and in predicting the joints’ behavior. Recently a sequential approach for the modeling of the human diarthrodial joints composed of three steps has been proposed. At each step the role of some anatomical structures is considered. Starting from a limited number of structures, the model gets more and more sophisticated until all the components, both passive (articular surfaces, ligaments and tendons) and active (muscles), are incorporated in the final model. According to this procedure, the behavior of the human ankle during passive motion (no loads applied) has been previously modeled by a one degree of freedom 5-5 fully parallel mechanism. Starting from this model, the kinetostatic model of the human ankle joint that replicates its behavior when external loads are applied is developed. The anatomical and mechanical characteristics and the role of the passive structures are considered; a multifiber model is developed and an optimization criteria based on experimental data is proposed. Finally an application of the developed model to an amputated ankle is presented, together with the results obtained from the optimization of the geometrical and mechanical Parameters. Although some improvements can be achieved, the model is satisfactorily able to replicate the behavior of the human ankle subject to the anterior drawer and the inversion clinical tests applied in the neutral position.

Enhancing the efficiency of solar concentrators by controlled optical aberrations

The diameters of traditional dish concentrators can reach several tens of meters, the construction of monolithic mirrors being difficult at these scales: cheap flat reflecting facets mounted on a common frame generally reproduce a paraboloidal surface. When a standard imaging mirror is coupled with a PV dense array, problems arise since the solar image focused is intrinsically circular. Moreover, the corresponding irradiance distribution is bell-shaped in contrast with the requirement of having all the cells under the same illumination. Mismatch losses occur when interconnected cells experience different conditions, in particular in series connections. In this PhD Thesis, we aim at solving these issues by a multidisciplinary approach, exploiting optical concepts and applications developed specifically for astronomical use, where the improvement of the image quality is a very important issue. The strategy we propose is to boost the spot uniformity acting uniquely on the primary reflector and avoiding the big mirrors segmentation into numerous smaller elements that need to be accurately mounted and aligned. In the proposed method, the shape of the mirrors is analytically described by the Zernike polynomials and its optimization is numerically obtained to give a non-imaging optics able to produce a quasi-square spot, spatially uniform and with prescribed concentration level. The freeform primary optics leads to a substantial gain in efficiency without secondary optics. Simple electrical schemes for the receiver are also required. The concept has been investigated theoretically modeling an example of CPV dense array application, including the development of non-optical aspects as the design of the detector and of the supporting mechanics. For the method proposed and the specific CPV system described, a patent application has been filed in Italy with the number TO2014A000016. The patent has been developed thanks to the collaboration between the University of Bologna and INAF (National Institute for Astrophysics).

Flagellin:allergen fusion proteins as novel vaccines for the treatment of severe type I allergies

Over the last decades the prevalence of food allergies has continually increased on a world wide scale. While there are effective treatments available for bee and wasp venom allergic patients, there is currently no established therapy for the treatment of severe food allergies. Aim of the project was to genetically fuse different food allergens with the immune modulating Toll-like receptor 5 (TLR5)-ligand flagellin and to test these constructs for their immune modulatory capacities both in vitro and in vivo. Chicken ovalbumin (Ova) as model antigen, Pru p 3, and Ara h 2 the respective major allergens from peach and peanut were used as allergens. The potential vaccine candidates were characterized by protein biochemical methods (purity, folding, endotoxin contaminations). Moreover, their immune modulating effects on cell culture lines (TLR5-receptor activation) and primary mouse immune cells (myeloid and plasmacytoid dendritic cells) were investigated. Additionally, the prophylactic and therapeutic use of the flagellin Ova fusion protein (rflaA:Ova) were investigated in a mouse model of intestinal allergy. In myeloid dendritic cells (mDC) stimulation with the fusion proteins led to a strong cell activation and cytokine secretion. Here, the fusion proteins proved to be a much stronger stimulus than the equimolar amount of both proteins provided alone or as a mixture. Noteworthy, stimulation with rflaA:Ova induced the secretion of the anti-inflammatory cytokine IL-10 from mDC. In co-culture experiments this IL-10 secretion suppressed the Ova-induced secretion of Th1 and Th2 cytokines from Ova-specific CD4 T cells. Using MyD88-deficient mDC this repression of cytokine secretion was shown to be TLR-dependent. Finally, the potency of the rflaA:Ova construct was investigated in a mouse model of Ova-induced intestinal allergy. In a prophylactic vaccination approach rflaA:Ova was shown to prevent the establishment of the intestinal allergy and all associated symptoms (weight loss, temperature drop, soft faeces). This fusion protein-mediated protection was accompanied by a reduced T cell activation, and reduced Th2 cytokines in intestinal homogenates. These effects were paralleled by a strong induction of Ova-specific IgG2a antibodies in rflaA:Ova-vaccinated sera, while Ova-specific IgE antibody production was significantly reduced. Therapeutic vaccination with rflaA:Ova reduced allergic symptoms and T cell activation but did not influence weight loss and antibody production. In all in vivo experiments vaccination with both proteins either provided alone or as a mixture did not have comparable effects. Future experiments aim at elucidating the mechanism and further optimization of the therapeutic vaccination approach. The results presented in this thesis demonstrate, that fusion proteins containing flagellin have strong immune modulatory capacities both in vitro and in vivo. Therefore, such constructs are promising vaccine candidates for the therapy of type I allergies.

Studio fluidodinamico di un reattore continuo agitato meccanicamente tramite tecniche PIV e PLIF

The study and understanding of the motion of the fluid phases in a mechanically stirred reactor has always been, and still are, an open problem which absorbs the study and the work of many researchers. In recent decades, thanks to the growing opportunities offered by the development of technology, we have made great strides in the understanding of mixing, one of the major unit operations at the base of many industrial processes. A complete understanding of this process and its optimization for industrial applications is a challenging task due to the complex interactions between the many factors at play that include physical, chemical and biological. The purpose of this thesis is the study of a fluid-mechanically-agitated continuous reactor through the use of optical diagnostic techniques, which allowed to determine the range of motion and the time of perfect homogenization in a reactor of standard geometry in different operating conditions.

Investigation of the Potential Energy Surface for the First Step in the Alkaline Hydrolysis of Methyl Acetate

The potential energy surface for the first step of the alkaline hydrolysis of methyl acetate was explored by a variety of methods. The conformational search routine within SPARTAN was used to determine the lowest energy am1 and pm3 structures for the anionic tetrahedral intermediate. Ab initio single point and geometry optimization calculations were performed to determine the lowest energy conformer, and the linear synchronous transition (lst) method was used to provide an initial structure for transition state optimization. Transition states were obtained at the am1, pm3, 3-21G, and 3-21 + G levels of theory. These transition states were compared with the anionic tetrahedral intermediates to examine the assumption that the intermediate is a good model for the transition state. In addition, the Cramer/Truhlar sm3 solvation model was used at the semiempirical level to compare gas phase and aqueous alkaline hydrolysis of methyl acetate.