Geração de renda e ocupações na cadeia agroindustrial de castanha de caju no Rio Grande do Norte: o caso do sertão de Apodi

This work is part of the research group studying agribusiness chains, by characterizing agroindustrial chain of cashew nuts in Rio Grande do Norte, with special emphasis on Sertão de Apodi Citizenship Territory, showing their different flows and linkages and analyzes generating jobs and income in the production of this good, from the experience of COOPAPI, using as a methodology for analyzing the input-output matrix. And this is justified by the fact that Brazil is in the context as the world's fifth largest producer of cashew nuts and the production of this product focus in the Northeast, especially the Rio Grande do Norte, which is the second largest producer of region, behind only the state of Ceará, which is the largest producer in the country. Moreover, in recent years the state has increased its insertion in international markets this product, particularly the Mossoró-Assu Territory, which constitutes the largest producer in the state, particularly the municipality of Serra do Mel, which has an arrangement different yield, based on the model of integrated rural development, embodied in family farming. Nevertheless, the Sertão de Apodi Citizenship appear as the fourth among the Citizenship territories of Rio Grande do Norte in the ranking of the production of cashew nuts, but the prevailing model of Cooperatives in the Territory, based on the Solidarity Economy, i,e, different from the old cooperative, which is based on the precepts as patronage, with cooperative owners, favor, etc.., encourages scientific research. In this, after a careful analysis of data from field research, it was noticed that among the links in the chain, the production link is what generates the most jobs, while the processing link commands to generate income, but a portion meaningful occupations and income are generated outside the territory, especially out of state RN, denouncing the gap in supply of some specific demands within the chain

Avaliação dos impactos do programa bolsa família na renda, na educação e no mercado de trabalho das famílias pobres do Brasil

This study aims to verify the impact of the Bolsa Família Program (BFP) in income and school attendance of poor Brazilian families. It is intended to also check the existence of a possible negative effect of the program on the labor market, titled as sloth effect. For such, microdata from the IBGE Census sample in 2010 were used. Seeking to purge possible selection biases, methodology of Quantilic Treatment Effect (QTE) was applied, in particular the estimator proposed by Firpo (2007), which assumes an exogenous and non-conditional treatment. Moreover, Foster- Greer-Thorbecke (FGT) index was calculated to check if there are fewer households below the poverty line, as well as if the inequality among the poor decreases. Human Opportunity Index (HOI) was also calculated to measure the access of young people / children education. Results showed that BFP has positively influenced the family per capita income and education (number of children aged 5-17 years old attending school). As for the labor market (worked hours and labor income), the program showed a negative effect. Thus, when compared with not benefiting families, those families who receive the BFP have: a) a higher family income (due to the shock of the transfer budget money) b) more children attending school (due to the conditionality imposed by the program); c) less worked hours (due to sloth effect in certain family groups) and d) a lower income from work. All these effects were potentiated separating the sample in the five Brazilian regions, being observed that the BFP strongly influenced the Northeast, showing a greater decrease in income inequality and poverty, and at the same time, achieved a greater negative impact on the labor market

Virulência de Aphanocladium album (Preuss) Gams e Verticillium lecanii (Zimm.) Viégas (Deuteromycotina: Hyphomycetes) para o Percevejo-de-renda da seringueira, Leptopharsa heveae (Drake & Poor) (Hemiptera: Tingidae)

The lace bug, Leptopharsa heveae is an insect that causes serious damage on rubber trees. In laboratory condition, the strains of Verticillium lecanii (ARSEF 6430, 6431 e 6432) and Aphanocladium album (ARSEF 6433) were tested on third-and fifth-instar nymphs and adults of L. heveae to evaluate their virulence using 2.4 x 10(5) and 2.4 x 10(7) conidia/mL. The bioassays were carried out using Petri dishes whose inner bottoms were covered with damp filter papers. Each Petri dish contained five insects and one rubber tree leaflet. The plates were covered with PVC film to provide high relative humidity, maintained at 26 +/- 0.5 degrees C and a photophase of 14 hours. The Probit analysis was calculated from mortality date of insects killed by fungi. In the highest concentrations, ARSEF 6430 was more virulent for third instar nymphs, and the LT50 was 1.9 days. For the fifth instar, the strains ARSEF 6430, 6433 and 6432 showed similar virulence with LT50 of 2.6, 2.6 and 3.2 days, respectively. For adults, ARSEF 6431 was the most virulent strain with the LT50 recorded at 2.0 days. The smallest concentration did not always cause more than 50% mortality.

Rendeiras da Vila de Ponta Negra Natal/RN: o ensino da renda de bilro e do desenho como alternativa de continuidade da produção artesanal tradicional

This paper analyzes the development of Bobbin Lace and Design workshops, in the neighborhood of Vila de Ponta Negra (in Natal - RN, Brazil), which proposed contents and practices for its learning and teaching that would compose a possible model for a hybrid Workshop of Bobbin Lace and Lace Design. This research was based on Ergonomic Work Analysis, a methodology used by Ergonomics to analyze work in a wide approach, considering cognitive, social, organizational, as well as other aspects which are relevant to the study of the working situation, in terms of learning/teaching, as addressed on this paper. Some steps of the above mentioned methodology were followed in order to understand the activity of Bobbin Lace craftswomen, by means of bibliographical research centered on this activity. The instruments used for collecting data comprise of conversational actions, analysis of collective work, and spontaneous as well as provoked verbalizations. The adaptations performed in the process of learning/teaching Bobbin Lace for the achievement of Bobbin Lace and Design workshops became instrumental for the continuity of that tradition, attracting new apprentices to this art/craft causing to revitalize a network of handicraft economical activities linked to the Bobbin Lace production, such as the making of cushion, bobbins and trestles

Modelagem situada de metodologia da oficina de desenho de renda de bilros

The bobbin lace, a secular art in the process of extinction in the Village Ponta Negra in Natal, Brazil, was one of the main means of income generation for some families in town, but over time, there was growing disaffection of the younger generation to learn and practice this art, due to the high demand of time for production and insufficient and not guaranteed financial return . This project aims to promote the recovery of control over the product in the production of bobbin lace in the village of Ponta Negra, by design and implementation of a workshop for the transfer of drawing techniques in the Production Center of Craft in Village of Ponta Negra. This design was based on the methodology of Ergonomic Work Analysis and in the concepts of anthropotechnology and technology social. The ergonomic analysis, by advocating and enforcing the social and technical building, was essential for the modeling of this workshop, as allowed the construction of a social participative device , with the participation of the community groups and the external group of researchers, in a process of social construction technique. As a result, it was observed that the transfer of technical design of bobbin lace molds came to complement the learning of art office, providing solutions to promote the sustainable development of the group of tenants, in an attempt to reduce the risk of extinction eminent, and also contributed to reactivate a network of economic activities interconnected to the craft, such as the production of cushions, lace and easels

Transferência de calor transiente na agitação linear intermitente de latas

Foi estudada a transferência de calor transiente na agitação linear e intermitente (ALI) de embalagens metálicas contendo simulantes de alimentos, objetivando-se sua aplicação em processos de pasteurização ou esterilização e conseqüentes tratamentos térmicos mais eficientes, homogêneos e com produto de melhor qualidade. Foram utilizados quatro meios fluidos simulantes de alimentos de diferentes viscosidades e massas específicas: três óleos e água. Foram combinados efeitos de cinco tratamentos, sendo: meio simulante (4 níveis), espaço livre (3 níveis), freqüência de agitação (4 níveis), amplitude de agitação (2 níveis) e posição das latas (4 níveis). Os ensaios de aquecimento e resfriamento foram feitos em tanque com água à temperatura de 98 °C e 17-20 °C, respectivamente. Com os dados de penetração de calor em cada experimento, foram calculados os parâmetros de penetração de calor fh, jh, fc e jc. Os resultados foram modelados utilizando-se grupos de números adimensionais e expressos em termos de Nusselt, Prandtl, Reynolds e funções trigonométricas (com medidas de amplitude e freqüência de agitação, espaço livre e dimensões da embalagem). Foram estabelecidas as duas Equações gerais para as fases de aquecimento e resfriamento: Nu = ReA 0,199.Pr 0,288.sen(xa/AM)0,406.cos(xf/FA) 1,039.cos((xf/FA).(EL/H).p) 4,556 Aquecimento Nu = 0,1295.ReA 0,047.Pr 0,193.sen(xa/AM)0,114.cos(xf/FA) 0,641.cos((xf/FA).(EL/H).p) 2,476 Resfriamento O processo de ALI pode ser aplicado em pasteurizadores ou autoclaves estáticas horizontais e verticais, com modificações simples. Concluiu-se que a ALI aumenta significativamente a taxa de transferência de calor, tanto no aquecimento como no resfriamento.

Simulação da transferência de calor em amostras aquecidas por plasma

The processing of materials through plasma has been growing enough in the last times in several technological applications, more specifically in surfaces treatment. That growth is due, mainly, to the great applicability of plasmas as energy source, where it assumes behavior thermal, chemical and/or physical. On the other hand, the multiplicity of simultaneous physical effects (thermal, chemical and physical interactions) present in plasmas increases the complexity for understanding their interaction with solids. In that sense, as an initial step for the development of that subject, the present work treats of the computational simulation of the heating and cooling processes of steel and copper samples immersed in a plasma atmosphere, by considering two experimental geometric configurations: hollow and plane cathode. In order to reach such goal, three computational models were developed in Fortran 90 language: an one-dimensional transient model (1D, t), a two-dimensional transient model (2D, t) and a two-dimensional transient model (2D, t) which take into account the presence of a sample holder in the experimental assembly. The models were developed based on the finite volume method and, for the two-dimensional configurations, the effect of hollow cathode on the sample was considered as a lateral external heat source. The main results obtained with the three computational models, as temperature distribution and thermal gradients in the samples and in the holder, were compared with those developed by the Laboratory of Plasma, LabPlasma/UFRN, and with experiments available in the literature. The behavior showed indicates the validity of the developed codes and illustrate the need of the use of such computational tool in that process type, due to the great easiness of obtaining thermal information of interest

Desinfecção solar de água para comunidades de baixa renda

The use of solar energy for water disinfection, and is accessible to disadvantaged communities because of its low cost, has the advantage of using disposable materials such as bottles of polyethylene terephthalate (PET). We present a study that used two methods of disinfection: the methodology proposed by the project Solar Water Disinfection (SODIS), which consisted of water disinfection by solar radiation and temperature and the methodology which the temperature of the water for disinfection. In both, we seek to eliminate microorganisms that cause serious diseases such as dysentery, typhoid, cholera, etc. Water samples were collected in the community of Bass, where the population has low income and the incidence of waterborne diseases is high. The experiments were divided into two stages. In step 1 we studied the feasibility of disinfection and in step 2 the feasibility of the pilot plant to obtain adequate levels of disinfection temperatures desired. The results showed the efficiency of the disinfection process, reaching an average of 80 to 100% death of microorganisms, but regrowth was observed in some samples. Finally on the good results of stage 1, is designed and built and tested in an experimental pilot plant, which has shown to be feasible to promote water disinfection through the use of solar energy. The water after treatment is in accordance with the limits established by Brazilian legislation for clean water, maintaining a positive performance for the disinfection and acceptable levels of bacterial regrowth

Análise da magnetohidrodinâmica com transferência de calor em canais de placas paralelas via transformação integral

The main goal of the present work is related to the dynamics of the steady state, incompressible, laminar flow with heat transfer, of an electrically conducting and Newtonian fluid inside a flat parallel-plate channel under the action of an external and uniform magnetic field. For solution of the governing equations, written in the parabolic boundary layer and stream-function formulation, it was employed the hybrid, numericalanalytical, approach known as Generalized Integral Transform Technique (GITT). The flow is sustained by a pressure gradient and the magnetic field is applied in the direction normal to the flow and is assumed that normal magnetic field is kept uniform, remaining larger than any other fields generated in other directions. In order to evaluate the influence of the applied magnetic field on both entrance regions, thermal and hydrodynamic, for this forced convection problem, as well as for validating purposes of the adopted solution methodology, two kinds of channel entry conditions for the velocity field were used: an uniform and an non-MHD parabolic profile. On the other hand, for the thermal problem only an uniform temperature profile at the channel inlet was employed as boundary condition. Along the channel wall, plates are maintained at constant temperature, either equal to or different from each other. Results for the velocity and temperature fields as well as for the main related potentials are produced and compared, for validation purposes, to results reported on literature as function of the main dimensionless governing parameters as Reynolds and Hartman numbers, for typical situations. Finally, in order to illustrate the consistency of the integral transform method, convergence analyses are also effectuated and presented

Modelagem numérica de escoamento em padrão anular com transferência de calor e massa

Annular flow is the prevailing pattern in transport and energy conversion systems and therefore, one of the most important patterns in multiphase flow in ducts. The correct prediction of the pressure gradient and heat transfer coefficient is essential for optimizing the system s capacity. The objective of this work is to develop and implement a numerical algorithm capable of predicting hydrodynamic and thermal characteristics for upflow, vertical, annular flow. The numerical algorithm is then complemented with the physical modeling of phenomena that occurs in this flow pattern. These are, turbulence, entrainment and deposition and phase change. For the development of the numerical model, axial diffusion of heat and momentum is neglected. In this way the time-averaged equations are solved in their parabolic form obtaining the velocity and temperature profiles for each axial step at a time, together with the global parameters, namely, pressure gradient, mean film thickness and heat transfer coefficient, as well as their variation in the axial direction. The model is validated for the following conditions: fully-developed laminar flow with no entrainment; fully developed laminar flow with heat transfer, fully-developed turbulent flow with entrained drops, developing turbulent annular flow with entrained drops, and turbulent flow with heat transfer and phase change

Influência da corrente de pulso, do tempo de pulso e diâmetro de gota sobre a estabilidade da transferência metálica no processo MIG-P

To obtain a process stability and a quality weld bead it is necessary an adequate parameters set: base current and time, pulse current and pulse time, because these influence the mode of metal transfer and the weld quality in the MIG-P, sometimes requiring special sources with synergistic modes with external control for this stability. This work aims to analyze and compare the effects of pulse parameters and droplet size in arc stability in MIG-P, four packets of pulse parameters were analysed: Ip = 160 A, tp = 5.7 ms; Ip = 300 A and tp = 2 ms, Ip = 350 A, tp = 1.2 ms and Ip = 350 A, tp = 0.8 ms. Each was analyzed with three different drop diameters: drop with the same diameter of the wire electrode; droplet diameter larger drop smaller than the diameter of the wire electrode. For purposes of comparison the same was determined relation between the average current and welding speed was determined generating a constant (Im / Vs = K) for all parameters. Welding in flat plate by simple deposition for the MIG-P with a distance beak contact number (DBCP) constant was perfomed subsequently making up welding in flat plate by simple deposition with an inclination of 10 degrees to vary the DBCP, where by assessment on how the MIG-P behaved in such a situation was possible, in addition to evaluating the MIG-P with adaptive control, in order to maintain a constant arc stability. Also high speed recording synchronized with acquiring current x voltage (oscillogram) was executed for better interpretation of the transfer mechanism and better evaluation in regard to the study of the stability of the process. It is concluded that parameters 3 and 4 exhibited greater versatility; diameters drop equal to or slightly less than the diameter of the wire exhibited better stability due to their higher frequency of detachment, and the detachment of the drop base does not harm the maintenance the height of the arc

Construção e avaliação térmica de um fogão solar tipo caixa

The present work presents a contribution in the study of modelings of transference of heat for foods submitted to the experimental tests in the considered solar oven, where the best modeling for the beefburger of chicken in study was evaluated, comparing the results, considering this food as a half-infinite(1er object considered model) and,after that, considered the chicken beefburger as a plain plate in transient regimen in two distinct conditions: not considering and another model considering the contribution of the generation term, through the Criterion of Pomerantsev. The Sun, beyond life source, is the origin of all the energy forms that the man comes using during its history and can be the reply for the question of the energy supplying in the future, a time that learns to use to advantage in rational way the light that this star constantly special tax on our planet. Shining more than the 5 billion years, it is calculated that the Sun still in them will privilege for others 6 billion years, or either, it is only in the half of its existence and will launch on the Earth, only in this year, 4000 times more energy that we will consume. Front to this reality, would be irrational not to search, by all means technical possible, to use to advantage this clean, ecological and gratuitous power plant. In this dissertation evaluate the performance of solar cooker of the type box. Laboratory of Solar Energy of the Federal University of the Great River of North - UFRN was constructed by the group (LES) a model of solar stove of the type box and was tested its viability technique, considering modeling foods submitted when baking in the solar oven, the cooker has main characteristic the easiness of manufacture and assembly, the low cost (was used material accessible composition to the low income communities) and simplicity in the mechanism of movement of the archetype for incidence of the direct solar light. They had been proposals modeling for calculations of food the minimum baking time, considering the following models of transference of heat in the transient state: object the halfinfinite, plain plate and the model of the sphere to study the necessary temperature for the it bakes of bread (considering spherical geometry). After evaluate the models of transmission of heat will be foods submitted you the processes of to it bakes of, the times gotten for the modeling with the experimental times of it bakes in the solar oven had been compared, demonstrating the modeling that more good that it portraies the accuracies of the results of the model

Modelagem da transferência de massa na remoção do óleo da água produzida por flotação em coluna com uso de tensoativos de origem vegetal

The treatment of oil produced water and its implications are continually under investigation and several questions are related to this subject. In the Northeast Region Brazil, the onshore reservoirs are, in its majority, mature oil fields with high production of water. As this oil produced water has high levels of oil, it cannot be directly discarded into the environment because it represents a risk for contamination of soil, water, and groundwater, or even may cause harm to living bodies. Currently, polyelectrolytes that promote the coalescence of the oil droplets are used to remove the dispersed oil phase, enhancing the effectiveness of the flotation process. The non-biodegradability and high cost of polyelectrolytes are limiting factors for its application. On this context, it is necessary to develop studies for the search of more environmentally friendly products to apply in the flotation process. In this work it is proposed the modeling of the flotation process, in a glass column, using surfactants derived from vegetal oils to replace the polyelectrolytes, as well as to obtain a model that represents the experimental data. In addition, it was made a comparative study between the models described in the literature and the one developed in this research. The obtained results showed that the developed model presented high correlation coefficients when fitting the experimental data (R2 > 0.98), thus proving its efficiency in modeling the experimental data.

Seleção conjugal e as mulheres re-casadas no mercado de casamentos em uma comunidade de baixa renda no nordeste brasileiro

A presente pesquisa partiu de uma revisão teórica dos assuntos relacionados à seleção sexual proposta por Charles Darwin, passando para evolução dos sistemas e da psicologia do acasalamento humano. Os estudos práticos, divididos em dois momentos, foram coletados numa comunidade litorânea de baixa renda no nordeste brasileiro, na qual as mulheres tiveram pelo menos duas uniões estáveis até a data da coleta, no ano de 2008. Nas primeiras análises, foram contempladas as expectativas dessas mulheres em relação aos atributos dos parceiros. E posteriormente, o perfil e valor das mesmas entraram em perspectiva. De uma forma geral, foi constatado que as mulheres, no primeiro casamento, de fato realizam matrimônios com parceiros mais parecidos com o que consideram ideal do que os posteriores. Assim como as segundas e subseqüentes uniões apresentam uma ligeira queda no valor (no mercado de casamentos) desses homens quando comparados aos primeiros companheiros levando em consideração indicadores biosocioeconômicos como idade, escolaridade e renda (status socioeconômico).

Transferência de alimento aos infantes de Callithrix jacchus em uma situação de escassez de recurso alimentar

The genus Callithrix, like other marmosets, presents a cooperative breeding system, characterized by the contribution of parents and non-breeding individuals of the social group in the care of infants. This care is provided through lactation, transport, supervision of infants and food transfers. In this study, we investigated the care of offspring in Callithrix jacchus through the food transfers in family groups under conditions of abundance and scarcity of food resources. We also attempted to verify the relationship between the participation of individuals in the transport of infants and in the food sharing. We observed four families at the Núcleo de Primatologia of the Universidade Federal do Rio Grande do Norte, in a total of seven infants, six twins and a single infant. Each infant was observed twice a week, from 1st to 20th week of life using the methods focal continuous and focal instantaneous sampling with one minute intervals. The observations were carried by 10 minutes and beginning with the supply of food for each family. Two families were tested under conditions of scarcity of food resources (experimental condition) and two others were subjected to conditions of abundant food, both conditions with restricted access to food supply. The condition of food scarcity did not influence the rate of food sharing with the infants that, in general, was considered low. All shares observed were passive sharings. Only one family showed higher levels of food begging, probably due to the loss of the mother during the period of lactation of her offspring. In this family, the dominant and subadult males were primarily responsible for the food sharing. The experimental condition influenced the distance of infants in relation to food source, so the infants in families that received abundant food remained closer to the source. However, it is believed that the place of food consumption was not influenced by experimental condition. There was no relationship between the participation of individuals in the transport and food sharing with their young. Therefore, it is suggested that, in general, the transfer of food in C. jacchus is characterized by tolerance to the demands of caregivers, represented by the passive sharing. Rates of sharing with infants were low, probably due to intra-group competition for food generated by the experiment.