Influência da Aplicação de laser de baixa Intensidade no recobrimento radicular Associado À Técnica de enxerto de tecido conjuntivo: estudo clínico controlado randomizado

Pós-graduação em Biopatologia Bucal - ICT

Controle de crescimento e redução de biofilmes pela aplicação de potencial ou corrente elétricos em superfícies metálicas, condutoras ou semicondutoras

Descrito como o presente Privilégio de Invenção, refere-se a um processo para a desinfecção de superfícies condutoras ou semicondutoras, evitando a formação ou eliminando biofilmes preexistentes, para tanto, o presente processo é realizado por meio da aplicação de um potencial ou corrente elétricos sobre as referidas superfícies sendo vantajosa por dispensar o uso de agentes biocidas, bem como não necessitar do uso de materiais ou produtos abrasivos, ou seja, com a tecnologia proposta no presente processo é possível controlar ou eliminar a presença de biofilmes em sistema industriais sem adição de substâncias ao sistema, pois no presente processo o reagente é o elétron ou o campo elétrico formado por ele.

Tecnologia e gestão pública municipal

Pós-graduação em Ciência da Informação - FFC

Efeito da adição de moléculas anfifílicas na formação de filmes Langmuir e Langmuir-Blodgett de derivados alquilados do politiofeno: aplicação em sensores

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência da aplicação de ultrassom em desidratação osmótica de carne bovina

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Aplicação de lógica fuzzy na elaboração de planta de valores genéricos

Pós-graduação em Ciências Cartográficas - FCT

Formação do professor para trabalhar com recursos de tecnologia assistiva: um estudo de caso em Mato Grosso

Due to the process of educational inclusion, it is necessary for the teacher who works with disabled students to acknowledge and master the resources of assistive technology equipment available in Brazil. The objective was to identify the presence of these resources at school and evaluate, having the teacher as the evaluator, the conditions of dealing with the Assistive Technology resources and equipment. The sample consisted of 14 teachers who work in the Resources Multifunction Classroom and 18 regular classroom teachers who have disabled students enrolled in their classrooms. Data collection was performed through the TAE Questionnaire - Assistive Technology for Education. The data collection was performance in groups during the training course sponsored by the Education Department of Rondonópolis as part of the Program of Continuing Education Training for Managers and Educators - Inclusive Education: The Right to Diversity. The questionnaire data indicated differences between the two groups mentioned. The teachers of the Resource Classes indicated that Assistive Technology resources are now being introducing at schools and that over 50% of this group understand the resources presented on the questionnaire. Most of the regular classroom teachers is still unaware of the Assistive Technology resources and equipment. Regarding the dealing of these resources the group of teachers from the multifunctional classroom is better prepared to use this technology. The data suggest the need for investment in acquisition and training of teachers in relation to Assistive Technology resources.

Desenvolvimento de dispositivos eletrônico-orgânicos e sua aplicação como sensores em meio aquoso

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Aplicação de um sistema de monitoramento remoto para auxiliar na manutenção preditiva e preventiva de componentes de uma subestação

The increase in energy consumption in the world has caused the electrical systems becoming ever larger and more complex. Because of that becomes necessary to use special tools to efficiently manage the equipment present in these systems. Nowadays a tool very used is the remote monitoring of assets which works collecting signals using sensors processing these signals and make them available to the system user. So the user can use informations that may assist him efficiently in making decisions when doing a maintenance. The system is technically efficient since it improves the measurement process and enables the asset management of a substation by using advanced technology for that and economically viable especially in cases where the user is subject to monetary loss due an interruption of power supply

Aplicação de métodos computacionais no estudo das fases intermetálicas ordenadas pt-sn

Fuel cells are a very promising solution to the problems of power generation and emission of pollutant to the environment, excellent to be used in stationary application and mobile application too. The high cost of production of these devices, mainly due to the use of noble metals as anode, is a major obstacle to massive production and deployment of this technology, however the use of intermetallic phases of platinum combined with other metals less noble has been evaluated as electrodes in order to minimize production costs and still being able to significantly improve the catalytic performance of the anode. The study of intermetallic phases, exclusively done by experimental techniques is not complete and demand that other methods need to be applied to a deeper understanding of the behavior geometric properties and the electronic structure of the material, to this end the use of computer simulation methods, which have proved appropriate for a broader understanding of the geometric and electronic properties of the materials involved, so far not so well understood.. The use of computational methods provides answers to explain the behavior of the materials and allows assessing whether the intermetallic may be a good electrode. In this research project was used the Quantum-ESPRESSO package, based on the DFT theory, which provides the self-consistent field calculations with great precision, calculations of the periodic systems interatomic force, and other post-processing calculations that points to a knowledge of the geometric and electronic properties of materials, which may be related to other properties of them, even the electrocatalytic. The electronic structure is determined from the optimized geometric structure of materials by analyzing the density of states (DOS) projected onto atomic orbital, which determines the influence of the electrocatalytic properties of the material... (Complete abstract click electronic access below)

Produção e aplicação de adubo orgânico, proveniente da compostagem de resíduos da FCT/UNESP

This work presents the objective of producing organic fertilizer from the waste generated at FCT/UNESP and its use in the growing sunflower. For this, there were collected wastes of pruning/weeding and organic waste from the canteen. It were made two types of treatments, one conventional and the other mechanized, using three mass ratios: ratio 1 (30% wastes of pruning/weeding (RP) + 70% organic waste (RC)), ratio 2 (50% RP + 50% RC) and ratio 3 (70% RP + 30% RC). The conventional system was done windrow with turning manual and the mechanized system was developed in reactors by injecting compressed air. The compounds produced were analyzed in terms of pH, organic matter, organic carbon, mineral residue, nitrogen, phosphorus and potassium, which could be compared to the values stipulated by the Instrução Normativa n° 25 de 23/07/2009 do Ministério da Agricultura, Pecuária e Abastecimento. The compounds produced were used on growing sunflowers in 14 different conditions for the systems manual and mechanized, totaling 26 treatments with the following proportions... (Complete abstract click electronic access below)

Otimização da extração alcalina com peróxido de hidrogênio em seqüência de branqueamento com aplicação de baixo fator kappa

The new market, focused on sustainability and other environmental concerns, refers to innovations that seek alternative forms of production. In pulp and paper bleaching alternative reagents are studied, for example, hydrogen peroxide, in partial substitution of chlorine dioxide in order to reduce the formation of organochlorines. In this context, this study examined the burden of hydrogen peroxide (H2O2) on alkaline extraction stage (stage Ep) required for the bleaching of pulp with eucalyptus kraft pulp, pre-oxygen delignified to obtain equivalent brightness at 90 ± 0.5% ISO, as well as its effect on quality of pulp produced. The pulp was bleached by the sequence D(Ep)DP, with the application of factor kappa of 0.14 and varying the concentration of hydrogen peroxide in Ep stage three, five, seven and nine kilograms of reagent per ton of pulp absolutely drought. The final P stage was optimized with the use of six, nine and twelve pounds of hydrogen peroxide per ton of absolutely dry pulp to achieve the required brightness. The quality of the pulp produced was analyzed based on the kappa number, the brightness and the viscosity. The methods were performed according to standards set by the standard TAPPI (Technical Association of the Pulp and Paper Industry). The best result was obtained using the following D0Ep(7)D1P(6), which showed a viscosity of 19.9 cP, 89.6% ISO brightness, consumption of 94.9 kg / t of reagents and reagent costs of US$ 28.15, because it showed better pulp quality for a lower cost compared to the others. It was found that the greater the amount of hydrogen peroxide in alkaline extraction, the lower the kappa number and increased the amount of residual hydrogen peroxide. The higher the charge of hydrogen peroxide in Ep stage, the lower the need for hydrogen peroxide in the final P stage, reducing the cost of bleaching

Aplicação de painéis fotovoltaicos em residências: estudos de caso em Guaratinguetá e Sevilha (Espanha)

In this paper we discussed the possibility of installing a photovoltaic panel in a house in order to reduce electrical consumption. Brazil is a country with a huge solar resource and photovoltaic technology allows transforming solar energy into electricity, helping to decentralize energy production. To enlarge the field of view, the study compares with the equivalent in a Spanish city, discussing how the law favors the initiative of using this type of energy. It will be seen that, with the encouragement of the government, the project can be done because the installation is amortized over a reasonable period of time, about eight years in Spain and three in Brazil

WSPControl: aplicação distribuída baseada em Web Services para monitoramento remoto de computadores

The tool proposed, known as WSPControl, enables remote monitoring of computers across the Internet using distributed applications. Through a Web Services architecture is possible the communication between these distributed applications across heterogeneous platforms, also eliminates the need for additional settings in computer networks, such as release of ports or proxy. The tool is divided into three modules, namely: • Client Interface: developed in C Sharp, is responsible for capturing data on performance of the monitored computer also connects to the Web Services to report this data. • Web Services Interface: developed in PHP using the PHP SOAP library, is responsible for facilitating the communication between internet applications and client. • Internet Interface: developed in PHP, is responsible for reading and interpreting the information captured these available on the Internet

Estratégias de aplicação de softwares educativos como instrumentos para o ensino de física

The technological advances of recent decades combined with digital inc1usion in Brazil sparked the country's population to the constant use of computers to perform tasks in many different natures. Whether it's for communication, entertainment, work or school, computers are tools with increasing numbers in Brazilian homes. Along with this evolution the Brazilian Physics teaching should be aware of the use of teaching tools that relate directly to the computer to student learning. Highlighting in this work we have scanned the contents of the Wikipedia community, a wide variety of educational videos placed on YouTube, educational games that try to teach the player in a fun way and a variety educational softwares placed on the World Wide Web. It is with special attention to educational softwares as tools for teaching physics, which describe some strategies for use of these software, combined with the textbooks, to illustrate some ways to introduce the use of educational softwares directly in the classroom