GESTION DE LA INNOVACIÓN: UN RETO EN LA EBC

ResumenEste artículo presenta los resultados más relevantes de un estudio de percepción sobre la gestión de la innovación en las  organizaciones en Costa Rica en los que participó el autor; sus  orígenes, efectos y obstáculos, las prácticas y experiencias en  innovación, la participación, éxito y fracaso en la gestión de la innovación, las características de los egresados universitarios  para favorecer los procesos de innovación, y los retos en materia de gestión de la innovación que tiene la universidad en una economía basada en el conocimiento. Como orientación  conceptual y metodológica se utilizó el Manual de Oslo: Proposed Guidelines for Collecting and Interpreting Technological Innovation, propuesto por la Organización para el Desarrollo y la Cooperación Económica.AbstractThis article presents the most excellent results of a perception study on the management of the innovation in the organizations in Costa Rica in which the author participated; its origins, effects and obstacles, the practices and experiences in innovation, the participation, success and failure in the management of the  innovation, the characteristics of the university withdrawn ones to favor the processes of innovation, and the challenges in the matter of management of the innovation that has the university in an economy based on the knowledge. As conceptual and methodologic direction were used the Manual of Oslo: Proposed for Guidelines Collecting and Interpreting Technological Innovation, proposed by the Organization for the Development and the Economic Cooperation.

Estudo de massa cerâmica triaxial visando à otimização do ciclo de queima da indústria de cerâmica estrutural

Over recent years the structural ceramics industry in Brazil has found a very favorable market for growth. However, difficulties related to productivity and product quality are partially inhibiting this possible growth. An alternative for trying to solve these problems and, thus, provide the pottery industry the feasibility of full development, is the substitution of firewood used in the burning process by natural gas. In order to contribute to this process of technological innovation, this paper studies the effect of co-use of ceramic phyllite and kaolin waste on the properties of a clay matrix, verifying the possible benefits that these raw materials can give to the final product, as well as the possibility of such materials to reduce the heat load necessary to obtain products with equal or superior quality. The study was divided into two steps: characterization of materials and study of formulations. Two clays, a phyllite and a residue of kaolin were characterized by the following techniques: laser granulometry, plasticity index by Atterberg limits, X-ray fluorescence, X-ray diffraction, mineralogical composition by Rietveld, thermogravimetric and differential thermal analysis. To study the formulations, specifically for evaluation of technological properties of the parts, was performed an experimental model that combined planning involving a mixture of three components (standard mass x phyllite x kaolin waste) and a 23 factorial design with central point associated with thermal processing parameters. The experiment was performed with restricted strip-plot randomization. In total, 13 compositional points were investigated within the following constraints: phyllite ≤ 20% by weight, kaolin waste ≤ 40% by weight, and standard mass ≥ 60% by weight. The thermal parameters were used at the following levels: 750 and 950 °C to the firing temperature, 5 and 15 °C/min at the heating rate, 15 and 45min to the baseline. The results showed that the introduction of phyllite and/or kaolin waste in ceramic body produced a number of benefits in properties of the final product, such as: decreased absorption of water, apparent porosity and linear retraction at burn; besides the increase in apparent specific mass and mechanical properties of parts. The best results were obtained in the compositional points where the sum of the levels of kaolin waste and phyllite was maximal (40% by weight), as well as conditions which were used in firing temperatures of 950 °C. Regarding the prospect of savings in heat energy required to form the desired microstructure, the phyllite and the residue of kaolin, for having small particle sizes and constitutions mineralogical phases with the presence of fluxes, contributed to the optimization of the firing cycle.

Estudo sobre as principais características das viaturas táticas ligeiras blindadas para o Exército português.

O presente Trabalho de Investigação Aplicada tem como estudo identificar as principais características das viaturas táticas ligeiras blindadas, que irão equipar o Exército Português, por forma a garantir a mobilidade tática terrestre. Com esta investigação pretende-se identificar a configuração do ambiente operacional, onde as viaturas das Forças Nacionais Destacadas tem sido empregues. De igual modo identificar as caraterísticas das viaturas táticas ligeiras blindadas disponíveis no mercado da indústria de defesa passíveis de serem adquiridas, descrevendo ainda o tipo de operações em que as forças do Exército Português tem participado, utilizando viaturas táticas ligeiras. Esta investigação tem como principal objetivo identificar as principais caraterísticas das viaturas táticas ligeiras blindadas a adquirir pelo Exército Português, para se adaptarem à realidade atual do ambiente operacional onde Portugal participa com forças, e fazer uma caracterização da mais recente viatura, a Pandur II 8x8, e a viatura com mais presenças em teatros de operações, o High Mobility Multipurpose Wheeled Vehicle. Para alcançar este objetivo principal, foi utilizado o método dedutivo partindo do ambiente operacional dos diversos Teatros de Operações em que Portugal tem empregue forças, para as principais caraterísticas das viaturas. O ambiente operacional que reside hoje em dia, nos teatros de operações, é caraterizado por assimetrias, resultantes de novas ameaças. Estas necessitam de esforços, por parte das forças militares para se adaptarem. As caraterísticas das viaturas táticas ligeiras blindadas têm vindo a sofrer algumas alterações na sua proteção e mobilidade, onde apresentam melhorias técnicas, face às inovações tecnológicas, mas há outras, como o poder de fogo que podem vir a ser colmatadas no futuro.

Gestão compartilhada de P&D em petróleo:a interação entre a Petrobrás e a Universidade Federal do Rio Grande do Norte

This work addresses the relationship between University-Firm aims to understand the model of shared management of R&D in petroleum of Petrobras with UFRN. This is a case study which sought to investigate whether the model of cooperation established by the two institutions brings innovation to generate technical-scientific knowledge and contribute to the coordination with other actors in the promotion of technological innovation. In addition to desk research the necessary data for analysis were obtained by sending questionnaires to the coordinators of projects in R&D at the company and university. Also, interviews were conducted with subjects who participated in the study since its inception to the present day. This case study were analysed through the Resource-Based View and Interorganizational Networks theory. The sample data also stands that: searches were aligned to the strategic planning and that 29% of R&D projects have been successful on the scope of the proposed objectives (of which 11% were incorporated into business processes); which was produced technical and scientific knowledge caracterized by hundreds of national and international publications; thesis, dissertations, eleven patents, and radical and incremental innovations; the partnership has also brought benefits to the academic processes induced by the improved infrastructure UFRN and changing the "attitude" of the university (currently with national prominence in research and staff training for the oil sector). As for the model, the technical point of view, although it has some problems, it follows that it is appropriate. From the viewpoint of the management model is criticized for containing an excess of bureaucracy. From the standpoint of strategic allocation of resources from the legal framework needs to be reassessed, because it is focused only on the college level and it is understood that should also reach the high school given the new reality of the oil sector in Brazil. For this it is desirable to add the local government to this partnership. The set of information leads to the conclusion that the model is identified and named as a innovation of organizational arrangement here known as Shared Management of R&D in petroleum of Petrobras with UFRN. It is said that the shared management model it is possible to exist, which is a simple and effective way to manage partnerships between firms and Science and Technology Institutions. It was created by contingencies arising from regulatory stand points and resource dependence. The partnership is the result of a process of Convergence, Construction and Evaluation supported by the tripod Simplicity, Systematization and Continuity, important factors for its consolidation. In practice an organizational arrangement was built to manage innovative university-industry partnership that is defined by a dyadic relationship on two levels (institutional and technical, therefore governance is hybrid), by measuring the quarterly meetings of systematic and standardized financial contribution proportional to the advancement of research. These details have led to the establishment of a point of interaction between the scientific and technological-business dimension, demystifying they are two worlds apart

Study of the impact federated erubrics on assessing competences in the practicum

Presentation Research of the Practicum and externships has a long history and involves important aspects for analysis. For example, the recent changes taking place in university grades allot more credits to the Practicum course in all grades, and the Company-University collaboration has exposed the need to study in new learning environments. The rise of ICT practices like ePortfolios, which require technological solutions and methods supported by experimentation, study and research, require particular examination due to the dynamic momentum of technological innovation. Tutoring the Practicum and externships requires remote monitoring and communication using ePortfolios, and competence-based assessment and students’ requirement to provide evidence of learning require the best tutoring methods available with ePortfolios. Among the elements of ePortfolios, eRubrics emerge as a tool for design, communication and competence-assessment. This project aims to consolidate a research line on eRubrics, already undertaken by another project -I+D+i [EDU2010-15432]- in order to expand the network of researchers and Centres of Excellence in Spain and other countries: Harvard University in USA, University of Cologne in Germany, University of Colima in Mexico, Federal University of Parana, University of Santa Catarina in Brasil, and Stockholm University in Sweden(1). This new project [EDU2013-41974-P](2) examines the impact of eRubrics on tutoring and on assessing the Practicum course and externships. Through technology, distance tutoring grants an extra dimension to human communication. New forms of teaching with technological mediation are on the rise and are highly valuable, not only for formal education but especially in both public and private sectors of non-formal education, such as occupational training, unemployed education and public servant training. Objectives Obj. 1. To analyse models of technology used in assessing learning in the Practicum of all grades at Spanish Faculties of Education. Obj. 2. To study models of learning assessment measured by eRubrics in the Practicum. Obj. 3. To analyse communication through eRubrics between students and their tutors at university and practice centres, focusing on students’ understanding of competences and evidences to be assessed in the Practicum. Obj. 4. To design assessment services and products, in order to federate companies and practice centres with training institutions. Among many other features, it has the following functions CoRubric(3) 1. The possibility to assess people, products or services by using rubrics. 2. Ipsative assessment. 3. Designing fully flexible rubrics. 4. Drafting reports and exporting results from eRubrics in a project. 5. Students and teachers talk about the evaluation and application of the criteria Methodology, Methods, Research Instruments or Sources Used The project will use techniques to collect and analyse data from two methodological approaches: 1. In order to meet the first objective, we suggest an initial exploratory descriptive study (Buendía Eisman, Colás Bravo & Hernández Pina, 1998), which involves conducting interviews with Practicum coordinators from all educational grades across Spain, as well as analysing the contents of the teaching guides used in all educational grades across Spain. 55 academic managers were interviewed from about 10 faculties of education in public universities in Spain (20%), and course guides 376 universities from 36 public institutions in Spain (72%) are analyzed. 2. In order to satisfy the second objective, 7 universities have been selected to implement the project two instruments aimed at tutors practice centers and tutors of the faculty. All instruments for collecting data were validated by experts using the Delphi method. The selection of experts had three aspects: years of professional experience, number and quality of publications in the field (Practicum, Educational Technology and Teacher Training), and self-rating of their knowledge. The resulting data was calculated using the Coefficient of Competence (Kcomp) (Martínez, Zúñiga, Sala & Meléndez, 2012). Results in all cases showed an average experience of more than 0.09 points. The two instruments of the first objective were validated during the first half of 2014-15 year, data collected during the second half. And the second objective during the first half of 2015-16 year and data collection for the second half. The set of four instruments (two for each objective 1 and 2) have the same dimensions as each of the sources (Coordinators, course guides, tutors of practice centers and faculty) as they were: a. Institution-Organization, b. Nature of internships, c. Relationship between agents, d. Management Practicum, e. Assessment. F. Technological support, g. Training and h. Assessment Ethics. Conclusions, Expected Outcomes or Findings The first results respond to Objective 1, where we find different conclusions depending on each of the six dimensions. In the case of internal regulations governing the organization and structure of the practicum, we note that most traditional degrees (Elementary and Primary grades) share common internal rules, in particular development methodology and criteria against other grades (Pedagogy and Social Education ). It is also true that the centers of practices in last cases are very different from each other and can be a public institution, a school, a company, a museum, etc. The memory with a 56.34% and 43.67% daily activities are more demands on students in all degrees, Lesson plans 28.18% 19.72% Portfolio 26.7% Didactic units and Others 32,4%. The technical support has been mainly used the platform of the University 47.89% and 57.75% Email, followed by other services and tools 9.86% and rubric platforms 1.41%. The assessment criteria are divided between formal aspects of 12.38%, Written expresión 12.38%, treatment of the subject 14.45%, methodological rigor of work 10.32%, and Level of argument Clarity and relevance of conclusions 10.32%. In general terms, we could say that there is a trend and debate between formative assessment against a accreditation. It has not yet had sufficient time to further study and confront other dimensions and sources of information. We hope to provide more analysis and conclusions in the conference date.

Industry-academia linkages in a high tech research field

Currently academic researches' focus started changing towards protecting IP rights and to transferring them into industrial actors. Accordingly, it is argued that academic's basic research focus started shifting towards applied research as it is essential for the radical inventions to be introduced in a competitive market. This research seeks to understand industry-academia linkages in a high tech field such as nano-crystals. In regards to supporting the technology transfer process within or cross country, this study illustrates the technology development trends and actors' engagement; nano-crystals technology and their interconnections; and maps the organisational (industry-academia) linkages that enhance the commercialisation of radical inventions. The results show that the industry-academia linkages that appeared as decentralized structure are more stable compared to other linkage types. Korean and Japanese organisations present such stable linkages. The linkages are even stronger when they appear as a mono-linkage type. Chinese organisations show a great illustration of such an effective mono-linkage of co-inventorships in high tech research field. The organisations in the US maintain international linkages.

Innovación social: una reflexión sobre los beneficios en su implementación en el Estado colombiano.

La innovación social es un tipo de innovación que promueve la búsqueda de soluciones enfocadas a los problemas que se presentan en la sociedad. Estas soluciones generan además un valor agregado que ayudan al crecimiento del país. En Colombia este tipo de iniciativas han empezado a tener una gran importancia y han empezado a promover condiciones de vida más favorables y justas que buscan generar un beneficio a la sociedad y contribuir al desarrollo del país. A partir de la historia de la innovación social, ejemplos y grandes literatos en la administración y la sociología, comprenderemos la importancia de la innovación en nuestro país.

Prediction of Length of Hospital Stay in Preterm Infants - A Case-Based Reasoning View

The length of stay of preterm infants in a neonatology service has become an issue of a growing concern, namely considering, on the one hand, the mothers and infants health conditions and, on the other hand, the scarce healthcare facilities own resources. Thus, a pro-active strategy for problem solving has to be put in place, either to improve the quality-of-service provided or to reduce the inherent financial costs. Therefore, this work will focus on the development of a diagnosis decision support system in terms of a formal agenda built on a Logic Programming approach to knowledge representation and reasoning, complemented with a case-based problem solving methodology to computing, that caters for the handling of incomplete, unknown, or even contradictory in-formation. The proposed model has been quite accurate in predicting the length of stay (overall accuracy of 84.9%) and by reducing the computational time with values around 21.3%.

Open Education and OER - A guide and call to action for policy makers

Executive Summary ALT has produced this call to action to highlight to education policy makers and professionals how Open Education and OER can expand inclusive and equitable access to education and lifelong learning, widen participation, and create new opportunities for the next generation of teachers and learners, preparing them to become fully engaged digital citizens. Open Education can also promote knowledge transfer while enhancing quality and sustainability, supporting social inclusion and creating a culture of inter-institutional collaboration and sharing. One of ALT’s three strategic aims is to increase the impact of Learning Technology for the wider community and we are issuing this call to action for policy makers to mandate that publicly funded educational resources are released under open licence to ensure that they reside in the public domain and are freely and openly available to all. This will be of wide benefit, but in particular will enable education providers and learning technology professionals to: Keep up to date with the rapid pace of technological innovation Develop critical, informed approaches to the implementation of Learning Technology and the impact on learners Scale up knowledge sharing and its benefits across sectors.

Standardised innovation management systems: a case study of the Spanish Standard UNE 166002:2006

This paper describes the experience of a Spanish manufacturing firm that implemented the UNE 166002:2006 standard, which is the first in the world to offer a certifiable standardised management system for innovation. After a brief review of innovation management in general, the paper describes the history, objectives, and content of the UNE 166002:2006 Spanish standard and the family of standards to which it belongs. The paper then presents a case study of the implementation of the standard in a manufacturing company, describing the benefits and difficulties of the implementation as detected by the company personnel involved. The paper concludes with a discussion of the desirability and feasibility of creating an international innovation management standard and a new generation of innovation management processes based on a standard for innovation

Innovative approach to building systems integration problems: Using systems theory, technological forecasting and scenario planning

Building services are worth about 2% GDP and are essential for the effective and efficient operations of the building. It is increasingly recognised that the value of a building is related to the way it supports the client organisation’s ongoing business operations. Building services are central to the functional performance of buildings and provide the necessary conditions for health, well-being, safety and security of the occupants. They frequently comprise several technologically distinct sub-systems and their design and construction requires the involvement of numerous disciplines and trades. Designers and contractors working on the same project are frequently employed by different companies. Materials and equipment is supplied by a diverse range of manufacturers. Facilities managers are responsible for operation of the building service in use. The coordination between these participants is crucially important to achieve optimum performance, but too often is neglected. This leaves room for serious faults. The need for effective integration is important. Modern technology offers increasing opportunities for integrated personal-control systems for lighting, ventilation and security as well as interoperability between systems. Opportunities for a new mode of systems integration are provided by the emergence of PFI/PPP procurements frameworks. This paper attempts to establish how systems integration can be achieved in the process of designing, constructing and operating building services. The essence of the paper therefore is to envisage the emergent organisational responses to the realisation of building services as an interactive systems network.

National system of innovation and technological learning:an integrated framework for understanding technological capability development in the Russian forestry sector

One of the issues in the innovation system literature is examination of technological learning strategies of laggard nations. Two distinct bodies of literature have contributed to our insight into forces driving learning and innovation, National Systems of Innovation (NSI) and technological learning literature. Although both literatures yield insights on catch-up strategies of 'latecomer' nations, the explanatory powers of each literature by itself is limited. In this paper, a possible way of linking the macro- and the micro-level approaches by incorporating enterprises as active learning entities into the learning and innovation system is proposed. The proposed model has been used to develop research hypotheses and indicate research directions and is relevant for investigating the learning strategies of firms in less technologically intensive industries outside East Asia.

Shedding light on technological development in Brazil

We try to shed some light oil the question of wily technology-intensive businesses often fail in less-developed countries and under what circumstances they are likely to be a Success from the perspective of both domestic and export markets. The answers were drawn from a set of empirical evidences from Brazilian firms applying photonics technologies. Sonic of the issues faced by them are related to the question of state versus private initiative, entering traditional versus niche market, and technology transfer versus product development management. In overall, we concluded that weakness of the institutions and inadequacy of social and organizational demography play a key role in explaining to a large extent wily countries differ in technological development and diffusion. In this context, we point out obstacles, which must be removed in order to make public policies and firm`s achievements more efficient. (C) 2008 Elsevier Ltd. All rights reserved.