Influence of sample matrix on the alkaline extraction of Cr(VI) in soils and industrial materials

An accurate and efficient determination of the highly toxic Cr(VI) in solid materials is important to determine the total Cr(VI) inventory of contaminated sites and the Cr(VI) release potential from such sites into the environment. Most commonly, total Cr(VI) is extracted from solid materials following a hot alkaline extraction procedure (US EPA method 3060A) where a complete release of water-extractable and sparingly soluble Cr(VI) phase is achieved. This work presents an evaluation of matrix effects that may occur during the hot alkaline extraction and in the determination of the total Cr(VI) inventory of variably composed contaminated soils and industrial materials (cement, fly ash) and is compared to water-extractable Cr(VI) results. Method validation including multiple extractions and matrix spiking along with chemical and mineralogical characterization showed satisfying results for total Cr(VI) contents for most of the tested materials. However, unreliable results were obtained by applying method 3060A to anoxic soils due to the degradation of organic material and/or reactions with Fe2+-bearing mineral phases. In addition, in certain samples discrepant spike recoveries have to be also attributed to sample heterogeneity. Separation of possible extracted Cr(III) by applying cation-exchange cartridges prior to solution analysis further shows that under the hot alkaline extraction conditions only Cr(VI) is present in solution in measurable amounts, whereas Cr(III) gets precipitated as amorphous Cr(OH)3(am). It is concluded that prior to routine application of method 3060A to a new material type, spiking tests are recommended for the identification of matrix effects. In addition, the mass of extracted solid material should to be well adjusted to the heterogeneity of the Cr(VI) distribution in the material in question.

Innovation Processes and Industrial Districts

In this survey, we examine the operations of innovation processes within industrial districts by exploring the ways in which differentiation, specialization, and integration affect the generation, diffusion, and use of new knowledge in such districts. We begin with an analysis of the importance of the division of labor and then investigate the effects of social embeddedness on innovation. We also consider the effect of forms of organization within industrial districts at various stages of product and process life, and we examine the negative aspects of embeddedness for innovation. We conclude with a discussion of the possible consequences of new information and communications technologies on innovation in industrial districts.

Regional Integration and Industrial Location in a Landlocked Spatial Economy

Regional integration proposals often require agreements between countries that differ in geographic size, resource endowments, transportation assets, technologies, and product quality. In this asymmetric setting, questions arise about the potential for mutual gains and the distribution of benefits among industries and workers in each country. This paper examines how regional integration between a small landlocked country and a large neighboring country--with a unique port facility that both nations must use to export goods--affects the wage and location decisions of firms, the allocation of labor, the welfare of each country's workers and firms, and aggregate measures of economic welfare in each country and the region. A simulated spatial labor market model is used to explore the economic effects of various stages of regional integration. Beginning with autarky as a benchmark case, we consider two forms of regional integration: partial mobility (mobile labor with geographically restricted firms); and full mobility (mobile labor and firms) with convergence of production technologies and product quality.

Safe abortion: technical and policy guidance for health systems

Esta 2da edición de la Guía recoge la última evidencia disponible no sólo respecto de la atención del aborto seguro sino también de cómo deben organizarse los recursos humanos, los insumos y las instituciones de salud para garantizar los derechos humanos, incluyendo los derechos sexuales y reproductivos de las mujeres.

International governmental agencies and career guidance

The international Organization for Economic Cooperation and Develop-ment (OECD), like many national and international organizations concerned with economic development believes that career guidance has an important role in promoting the development of a country's human resources. (Mapping the future: Young People and career guidance OECD, 1996). Generally the economic development agencies always recommend that career guidance services should be strengthened. Too frequently, however, they do not recognize the difficulties facing counselor in the schools and do not give clear and specific recommendations, yet they appear to believe that the education or other au thorities who are responsible to guidance will quickly agree and provide more resources for guidance. In addition to economic development agencies, social and educational development agencies also make important recommendations concerning the provision of guidance services. UNESCO, for example, has published two re- cent reports (Policies and Guidelines for Educational and Vocational Guidelines for Equal Access and Opportunity for Girls and Women in Technical and Vocational Education.) It is interesting to compare the OECD and UNESCO rec- ommendations and note that the relative strengths of each set of recommenda- tions, and to imagine how they might be combined in advocating changes in policies and programs.

International governmental agencies and career guidance

The international Organization for Economic Cooperation and Develop-ment (OECD), like many national and international organizations concerned with economic development believes that career guidance has an important role in promoting the development of a country's human resources. (Mapping the future: Young People and career guidance OECD, 1996). Generally the economic development agencies always recommend that career guidance services should be strengthened. Too frequently, however, they do not recognize the difficulties facing counselor in the schools and do not give clear and specific recommendations, yet they appear to believe that the education or other au thorities who are responsible to guidance will quickly agree and provide more resources for guidance. In addition to economic development agencies, social and educational development agencies also make important recommendations concerning the provision of guidance services. UNESCO, for example, has published two re- cent reports (Policies and Guidelines for Educational and Vocational Guidelines for Equal Access and Opportunity for Girls and Women in Technical and Vocational Education.) It is interesting to compare the OECD and UNESCO rec- ommendations and note that the relative strengths of each set of recommenda- tions, and to imagine how they might be combined in advocating changes in policies and programs.

International governmental agencies and career guidance

The international Organization for Economic Cooperation and Develop-ment (OECD), like many national and international organizations concerned with economic development believes that career guidance has an important role in promoting the development of a country's human resources. (Mapping the future: Young People and career guidance OECD, 1996). Generally the economic development agencies always recommend that career guidance services should be strengthened. Too frequently, however, they do not recognize the difficulties facing counselor in the schools and do not give clear and specific recommendations, yet they appear to believe that the education or other au thorities who are responsible to guidance will quickly agree and provide more resources for guidance. In addition to economic development agencies, social and educational development agencies also make important recommendations concerning the provision of guidance services. UNESCO, for example, has published two re- cent reports (Policies and Guidelines for Educational and Vocational Guidelines for Equal Access and Opportunity for Girls and Women in Technical and Vocational Education.) It is interesting to compare the OECD and UNESCO rec- ommendations and note that the relative strengths of each set of recommenda- tions, and to imagine how they might be combined in advocating changes in policies and programs.

Economies of Transport Density and Industrial Agglomeration

This paper develops a model of a spatial economy in which interregional trade patterns and the structure of the transport network are determined endogenously as a result of the interaction between industrial location behavior and increasing returns in transportation, in particular, economies of transport density. The traditional models assume either the structure of the transport network or industrial location patterns, and hence, they are unable to explain the interdependence of the two. It is shown that economies of transport density can be the primary source of industrial localization.

HeartCycle: User interaction and patient education

Cardiovascular Diseases are the most prevalent and serious chronic conditions existing nowadays. They are the primary cause of death in the world and generate enormous expenditures to the health systems. Tele-monitoring and personal health systems have proven to be good options for tackling this situation; however they are still lacking many functionalities. It is necessary to find solutions that allow health professionals to follow up patients more closely and efficiently, while reducing the non-adherence of patients to the treatment regime. HeartCycle research project (partially funded by the European Commission) has developed a personal health system for cardiovascular diseases management with the aim to address this problem. This paper describes the Patient Loop of this solution, including the different components, the adopted user interaction, and the implemented patients education and coaching strategy.

Real time optimization in chemical process: evaluation of strategies, improvements and industrial application.

The increasing economic competition drives the industry to implement tools that improve their processes efficiencies. The process automation is one of these tools, and the Real Time Optimization (RTO) is an automation methodology that considers economic aspects to update the process control in accordance with market prices and disturbances. Basically, RTO uses a steady-state phenomenological model to predict the process behavior, and then, optimizes an economic objective function subject to this model. Although largely implemented in industry, there is not a general agreement about the benefits of implementing RTO due to some limitations discussed in the present work: structural plant/model mismatch, identifiability issues and low frequency of set points update. Some alternative RTO approaches have been proposed in literature to handle the problem of structural plant/model mismatch. However, there is not a sensible comparison evaluating the scope and limitations of these RTO approaches under different aspects. For this reason, the classical two-step method is compared to more recently derivative-based methods (Modifier Adaptation, Integrated System Optimization and Parameter estimation, and Sufficient Conditions of Feasibility and Optimality) using a Monte Carlo methodology. The results of this comparison show that the classical RTO method is consistent, providing a model flexible enough to represent the process topology, a parameter estimation method appropriate to handle measurement noise characteristics and a method to improve the sample information quality. At each iteration, the RTO methodology updates some key parameter of the model, where it is possible to observe identifiability issues caused by lack of measurements and measurement noise, resulting in bad prediction ability. Therefore, four different parameter estimation approaches (Rotational Discrimination, Automatic Selection and Parameter estimation, Reparametrization via Differential Geometry and classical nonlinear Least Square) are evaluated with respect to their prediction accuracy, robustness and speed. The results show that the Rotational Discrimination method is the most suitable to be implemented in a RTO framework, since it requires less a priori information, it is simple to be implemented and avoid the overfitting caused by the Least Square method. The third RTO drawback discussed in the present thesis is the low frequency of set points update, this problem increases the period in which the process operates at suboptimum conditions. An alternative to handle this problem is proposed in this thesis, by integrating the classic RTO and Self-Optimizing control (SOC) using a new Model Predictive Control strategy. The new approach demonstrates that it is possible to reduce the problem of low frequency of set points updates, improving the economic performance. Finally, the practical aspects of the RTO implementation are carried out in an industrial case study, a Vapor Recompression Distillation (VRD) process located in Paulínea refinery from Petrobras. The conclusions of this study suggest that the model parameters are successfully estimated by the Rotational Discrimination method; the RTO is able to improve the process profit in about 3%, equivalent to 2 million dollars per year; and the integration of SOC and RTO may be an interesting control alternative for the VRD process.

Evaluation of hybrid and distance education learning environments in Spain

This article describes the adaptation and validation of the Distance Education Learning Environments Survey (DELES) for use in investigating the qualities found in distance and hybrid education psycho-social learning environments in Spain. As Europe moves toward post-secondary student mobility, equanimity in access to higher education, and more standardised degree programs across the European Higher Education Area (EHEA) the need for a high quality method for continually assessing the excellence of distance and hybrid learning environments has arisen. This study outlines how the English language DELES was adapted into the new Spanish-Distance Education Learning Environments Survey (S-DELES) for use with a Bachelor of Psychology and Criminology degree program offering both distance and hybrid education classes. We present the relationships between psycho-social learning environment perceptions and those of student affect. We also present the asynchronous aspects of the environment, scale means, and a comparison between the perceptions of distance education students and their hybrid education counterparts that inform the university about the baseline health of the information and communication technologies (ICT) environment within which the study was conducted.

An approach to the application of shift-and-add algorithms on engineering and industrial processes

Different kinds of algorithms can be chosen so as to compute elementary functions. Among all of them, it is worthwhile mentioning the shift-and-add algorithms due to the fact that they have been specifically designed to be very simple and to save computer resources. In fact, almost the only operations usually involved with these methods are additions and shifts, which can be easily and efficiently performed by a digital processor. Shift-and-add algorithms allow fairly good precision with low cost iterations. The most famous algorithm belonging to this type is CORDIC. CORDIC has the capability of approximating a wide variety of functions with only the help of a slight change in their iterations. In this paper, we will analyze the requirements of some engineering and industrial problems in terms of type of operands and functions to approximate. Then, we will propose the application of shift-and-add algorithms based on CORDIC to these problems. We will make a comparison between the different methods applied in terms of the precision of the results and the number of iterations required.