Concrete Pavement Mixture Design and Analysis (MDA) Guide Specification for Highway Concrete Pavements, TPF-5(205), 2012

A guide specification and commentary have been prepared that lay out current state-of-the art thinking with respect to materials and mixture selection, proportioning, and acceptance. These documents take into account the different environments, practices, and materials in use across the US and allow optional inputs for local application.

Concrete Pavement Mixture Design and Analysis (MDA): Assessment of Air Void System Requirements for Durable Concrete, TPF-5(205), 2012

Concrete will suffer frost damage when saturated and subjected to freezing temperatures. Frost-durable concrete can be produced if a specialized surfactant, also known as an air-entraining admixture (AEA), is added during mixing to stabilize microscopic air voids. Small and well-dispersed air voids are critical to produce frost-resistant concrete. Work completed by Klieger in 1952 found the minimum volume of air required to consistently ensure frost durability in a concrete mixture subjected to rapid freezing and thawing cycles. He suggested that frost durability was provided if 18 percent air was created in the paste. This is the basis of current practice despite the tests being conducted on materials that are no longer available using tests that are different from those in use today. Based on the data presented, it was found that a minimum air content of 3.5 percent in the concrete and 11.0 percent in the paste should yield concrete durable in the ASTM C 666 with modern AEAs and low or no lignosulfonate water reducers (WRs). Limited data suggests that mixtures with a higher dosage of lignosulfonate will need about 1 percent more air in the concrete or 3 percent more air in the paste for the materials and procedures used. A spacing factor of 0.008 in. was still found to be necessary to provide frost durability for the mixtures investigated.

Final Research and Analysis Report: Iowa Energy Poll, January 15, 2009

 The Iowa Power Fund and the Office of Energy Independence are charged with the responsibility of creating an economically viable and sound energy future for Iowa through energy independence. This vision can only be achieved if a majority, if not all Iowans, are united in this cause and actively participate in it

Variation in thermal performance and reaction norms among populations of Drosophila melanogaster.

The major goal of evolutionary thermal biology is to understand how variation in temperature shapes phenotypic evolution. Comparing thermal reaction norms among populations from different thermal environments allows us to gain insights into the evolutionary mechanisms underlying thermal adaptation. Here, we have examined thermal adaptation in six wild populations of the fruit fly (Drosophila melanogaster) from markedly different natural environments by analyzing thermal reaction norms for fecundity, thorax length, wing area, and ovariole number under ecologically realistic fluctuating temperature regimes in the laboratory. Contrary to expectation, we found only minor differences in the thermal optima for fecundity among populations. Differentiation among populations was mainly due to differences in absolute (and partly also relative) thermal fecundity performance. Despite significant variation among populations in the absolute values of morphological traits, we observed only minor differentiation in their reaction norms. Overall, the thermal reaction norms for all traits examined were remarkably similar among different populations. Our results therefore suggest that thermal adaptation in D. melanogaster predominantly involves evolutionary changes in absolute trait values rather than in aspects of thermal reaction norms.

A detailed urinary excretion time course study of captan and folpet biomarkers in workers for the estimation of dose, main route-of-entry and most appropriate sampling and analysis strategies

Captan and folpet are two fungicides largely used in agriculture, but biomonitoring data are mostly limited to measurements of captan metabolite concentrations in spot urine samples of workers, which complicate interpretation of results in terms of internal dose estimation, daily variations according to tasks performed, and most plausible routes of exposure. This study aimed at performing repeated biological measurements of exposure to captan and folpet in field workers (i) to better assess internal dose along with main routes-of-entry according to tasks and (ii) to establish most appropriate sampling and analysis strategies. The detailed urinary excretion time courses of specific and non-specific biomarkers of exposure to captan and folpet were established in tree farmers (n = 2) and grape growers (n = 3) over a typical workweek (seven consecutive days), including spraying and harvest activities. The impact of the expression of urinary measurements [excretion rate values adjusted or not for creatinine or cumulative amounts over given time periods (8, 12, and 24 h)] was evaluated. Absorbed doses and main routes-of-entry were then estimated from the 24-h cumulative urinary amounts through the use of a kinetic model. The time courses showed that exposure levels were higher during spraying than harvest activities. Model simulations also suggest a limited absorption in the studied workers and an exposure mostly through the dermal route. It further pointed out the advantage of expressing biomarker values in terms of body weight-adjusted amounts in repeated 24-h urine collections as compared to concentrations or excretion rates in spot samples, without the necessity for creatinine corrections.

ConnectomeViewer - Multi-Modal Multi-Level Network Visualization and Analysis.

Introduction: The field of Connectomic research is growing rapidly, resulting from methodological advances in structural neuroimaging on many spatial scales. Especially progress in Diffusion MRI data acquisition and processing made available macroscopic structural connectivity maps in vivo through Connectome Mapping Pipelines (Hagmann et al, 2008) into so-called Connectomes (Hagmann 2005, Sporns et al, 2005). They exhibit both spatial and topological information that constrain functional imaging studies and are relevant in their interpretation. The need for a special-purpose software tool for both clinical researchers and neuroscientists to support investigations of such connectome data has grown. Methods: We developed the ConnectomeViewer, a powerful, extensible software tool for visualization and analysis in connectomic research. It uses the novel defined container-like Connectome File Format, specifying networks (GraphML), surfaces (Gifti), volumes (Nifti), track data (TrackVis) and metadata. Usage of Python as programming language allows it to by cross-platform and have access to a multitude of scientific libraries. Results: Using a flexible plugin architecture, it is possible to enhance functionality for specific purposes easily. Following features are already implemented: * Ready usage of libraries, e.g. for complex network analysis (NetworkX) and data plotting (Matplotlib). More brain connectivity measures will be implemented in a future release (Rubinov et al, 2009). * 3D View of networks with node positioning based on corresponding ROI surface patch. Other layouts possible. * Picking functionality to select nodes, select edges, get more node information (ConnectomeWiki), toggle surface representations * Interactive thresholding and modality selection of edge properties using filters * Arbitrary metadata can be stored for networks, thereby allowing e.g. group-based analysis or meta-analysis. * Python Shell for scripting. Application data is exposed and can be modified or used for further post-processing. * Visualization pipelines using filters and modules can be composed with Mayavi (Ramachandran et al, 2008). * Interface to TrackVis to visualize track data. Selected nodes are converted to ROIs for fiber filtering The Connectome Mapping Pipeline (Hagmann et al, 2008) processed 20 healthy subjects into an average Connectome dataset. The Figures show the ConnectomeViewer user interface using this dataset. Connections are shown that occur in all 20 subjects. The dataset is freely available from the homepage (connectomeviewer.org). Conclusions: The ConnectomeViewer is a cross-platform, open-source software tool that provides extensive visualization and analysis capabilities for connectomic research. It has a modular architecture, integrates relevant datatypes and is completely scriptable. Visit www.connectomics.org to get involved as user or developer.

Field Performance and Evaluation of Slurry Seals, HR-195, 1980

As part of the overall research program of evaluating asphalt emulsion slurry seal as a pavement maintenance material, 31 duplicate 500-ft test sections were constructed on U.S. 6 between Adel and Waukee in Dallas County during September and October of 1978. These test sections included combinations of eight aggregates, two gradings, three asphalt emulsions, two mineral fillers, and a range of emulsion contents determined by laboratory mix designs. The emulsion contents of the test sections varied from 10.3% for Section 7A (Ferguson coarse) to 32.9% for Section 31A (lightweight aggregate). The post-construction performance evaluation of the test sections, consisting primarily of the friction tests and surface appearance observations, was conducted at different time intervals up to 24 months after construction. At the 24-month final evaluation, most of the test sections had carried a total of 1.4 million vehicles.

Characterization of the effect of mammary gland irridiation on experimental brest cancer progression and analysis of the implicated mechanisms

SUMMARY Radiotherapy is commonly and efficiently used to treat solid cancer in the clinic. Experimental evidence however suggests that radiation can promote tumor progression by inducing chronic modifications of the tumor microenvironment. Clinically, these observations are highly relevant to aggressive tumoral lesions relapsing after radiation therapy, a leading cause of patients' death. The investigation and understanding of the biological mechanisms implicated in the malignant progression of post-radiation relapses are therefore of major importance. Here we used a syngeneic (immunocompetent) breast cancer orthotopic xenograft model, to show that local irradiation of the mammary gland promotes the appearance of an invasive and metastatic tumor phenotype. Previous studies in our laboratory revealed that inhibition of tumor-induced angiogenesis and consequent increase in tumor hypoxia promotes metastasis formation through the activation of pro-invasive programs in the tumor cells. Our results extend these observations suggesting that mammary gland irradiation induces the recruitment of CD11b+ cells to both the primary tumor and the lungs at pre-metastatic stages through the hypoxia-dependent induction of Kit-ligand (KITL) expression in primary tumors. Abrogation of KITL expression in tumor cells prevented CD11 b+ cells accumulation in both the primary tumor and lungs and significantly reduced metastases of tumors growing in irradiated mammary gland. Importantly, irradiated mammary gland enhanced tumor-induced mobilization of circulating CD11b+cKit+ myelomonocytic cells through a HIF1- and KITL-dependent process. By cell transfer experiments, mobilized circulating CD11b+cKit+ cells were shown to supply both tumor- and lungs infiltrating CD11b+ cells. Using a blocking antibody against cKit (the KITL receptor), the mobilization of CD11b+cKit+ ceils was prevented as well as lung metastases derived from tumors growing in irradiated mammary gland. Taken together, these results indicate that tumors growing in a pre-irradiated mammary gland partially promote their malignant progression through the distant mobilization of circulating myelomonocytic precursor cells. They identify KITL inhibition and/or cKit receptor neutralization as potentially promising therapeutic approaches for post-radiation relapses. RESUME La radiothérapie est largement utilisée comme traitement de choix de nombreux types de cancers. L'agressivité des récidives tumorales observée en clinique après radiothérapie suggère cependant que le recours à l'irradiation pourrait dans certains cas accélérer la progression tumorale. De récents travaux expérimentaux ont en effet permis d'appuyer cette hypothèse, en montrant notamment l'effet néfaste des modifications chroniques de l'environnement induites par l'irradiation sur la progression tumorale. A l'aide d'un modèle murin syngénique orthotopique de cancer de sein, nous avons pu montrer que l'irradiation locale de la glande mammaire facilite l'invasion et la dissémination métastatique des cellules tumorales en favorisant le recrutement de cellules myéloïdes CD11 b+ vers la tumeur primaire et les poumons à un stade pré-métastatique. Comme mécanisme impliqué dans le recrutement des cellules CD11b+, nous avons pu observer après irradiation locale de la glande mammaire une expression augmentée de Kit-ligand (KITL) dans la tumeur (induite par l'hypoxie) ainsi que la mobilisation de cellules myéloïdes circulantes exprimant le récepteur cKit et précurseurs des cellules CD11b+ infiltrant la tumeur et les poumons. En empêchant la mobilisation par la tumeur de cellules circulantes cKit+ par des approches à la fois génétique et pharmacologique nous avons pu prévenir l'accumulation de cellules myéloïdes CD11 b+ dans la tumeur primaire et les poumons ainsi que la dissémination métastatique induites par' l'irradiation de la glande mammaire. De façon générale, ces résultats montrent que la progression agressive des tumeurs qui se développent dans un environnement irradié repose à la fois sur l'expression tumorale de KITL et la mobilisation de cellules myéloïdes précurseurs cKit*. Ils auront permis d'identifier KITL et/ou cKit comme des cibles thérapeutiques potentielles intéressantes pour le traitement des récidives tumorales après radiothérapie.

Concrete Pavement Mixture Design and Analysis (MDA): Factors Influencing Drying Shrinkage, TPF-5(205), 2014

This literature review focuses on factors influencing drying shrinkage of concrete. Although the factors are normally interrelated, they can be categorized into three groups: paste quantity, paste quality, and other factors.

Performance and hormonal profile in broiler chickens fed with different energy levels during post restriction period

The aim of this work was to investigate the influence of diet energy level on performance and hormonal profiles of broilers during post restriction period. It was a split-plot experiment, and the main treatments were in a 2x2 factorial scheme. Birds were fed restricted to 30% of the ad libitum intake, from 7 to 14 days of age. After the restriction period, birds were fed ad libitum with diets containing low (2,900 kcal ME/kg) or high (3,200 kcal ME/kg) energy until 49 days of age. Broilers fed with high energy ration showed lower feed intake and better feed conversion and decreased carcass protein; however, abdominal fat pad, and total carcass fat were not affected by ration energy levels or feeding program. Neither diet energy level nor feed restriction program changed body weight at 49 days. The profile of insulin-like growth factor-1 (IGF-1) was reduced during the feed restriction period, but increased at refeeding period. Feeding program and ration energy level did not affect T3, T4 and growth hormone serum concentrations. Feed restriction at 30% of ad libitum intake is not enough to promote changes on carcass quality, related to fat deposition, and on metabolic hormone levels, except IGF-1 seric level that has rapid increase after feed restriction.

Investigation of Field Corrosion Performance and Bond/Development Length of Galvanized Reinforcing Steel, TR-666, 2014

In reinforced concrete systems, ensuring that a good bond between the concrete and the embedded reinforcing steel is critical to long-term structural performance. Without good bond between the two, the system simply cannot behave as intended. The bond strength of reinforcing bars is a complex interaction between localized deformations, chemical adhesion, and other factors. Coating of reinforcing bars, although sometimes debated, has been commonly found to be an effective way to delay the initiation of corrosion in reinforced concrete systems. For many years, the standard practice has been to coat reinforcing steel with an epoxy coating, which provides a barrier between the steel and the corrosive elements of water, air, and chloride ions. Recently, there has been an industry-led effort to use galvanizing to provide the protective barrier commonly provided by traditional epoxy coatings. However, as with any new structural product, questions exist regarding both the structural performance and corrosion resistance of the system. In the fall of 2013, Buchanan County, Iowa constructed a demonstration bridge in which the steel girders and all internal reinforcing steel were galvanized. The work completed in this project sought to understand the structural performance of galvanized reinforcing steel as compared to epoxy-coated steel and to initiate a long-term corrosion monitoring program. This work consisted of a series of controlled laboratory tests and the installation of a corrosion monitoring system that can be observed for years in the future. The results of this work indicate there is no appreciable difference between the bond strength of epoxy-coated reinforcing steel and galvanized reinforcing steel. Although some differences were observed, no notable difference in either peak load, slip, or failure mode could be identified. Additionally, a long-term monitoring system was installed in this Buchanan County bridge and, to date, no corrosion activity has been identified.

Differential protein labeling with thiol-reactive infrared DY-680 and DY-780 maleimides and analysis by two-dimensional gel electrophoresis.

Differential protein labeling with 2-DE separation is an effective method for distinguishing differences in the protein composition of two or more protein samples. Here, we report on a sensitive infrared-based labeling procedure, adding a novel tool to the many labeling possibilities. Defined amounts of newborn and adult mouse brain proteins and tubulin were exposed to maleimide-conjugated infrared dyes DY-680 and DY-780 followed by 1- and 2-DE. The procedure allows amounts of less than 5 microg of cysteine-labeled protein mixtures to be detected (together with unlabeled proteins) in a single 2-DE step with an LOD of individual proteins in the femtogram range; however, co-migration of unlabeled proteins and subsequent general protein stains are necessary for a precise comparison. Nevertheless, the most abundant thiol-labeled proteins, such as tubulin, were identified by MS, with cysteine-containing peptides influencing the accuracy of the identification score. Unfortunately, some infrared-labeled proteins were no longer detectable by Western blots. In conclusion, differential thiol labeling with infrared dyes provides an additional tool for detection of low-abundant cysteine-containing proteins and for rapid identification of differences in the protein composition of two sets of protein samples.

Concrete Pavement Mixture Design and Analysis (MDA): Development and Evaluation of Vibrating Kelly Ball Test (VKelly Test) for the Workability of Concrete, 2015

Due to the low workability of slipform concrete mixtures, the science of rheology is not strictly applicable for such concrete. However, the concept of rheological behavior may still be considered useful. A novel workability test method (Vibrating Kelly Ball or VKelly test) that would quantitatively assess the responsiveness of a dry concrete mixture to vibration, as is desired of a mixture suitable for slipform paving, was developed and evaluated. The objectives of this test method are for it to be cost-effective, portable, and repeatable while reporting the suitability of a mixture for use in slipform paving. The work to evaluate and refine the test was conducted in three phases: 1. Assess whether the VKelly test can signal variations in laboratory mixtures with a range of materials and proportions 2. Run the VKelly test in the field at a number of construction sites 3. Validate the VKelly test results using the Box Test developed at Oklahoma State University for slipform paving concrete The data collected to date indicate that the VKelly test appears to be suitable for assessing a mixture’s response to vibration (workability) with a low multiple operator variability. A unique parameter, VKelly Index, is introduced and defined that seems to indicate that a mixture is suitable for slipform paving when it falls in the range of 0.8 to 1.2 in./√s.