758 resultados para TAP
Resumo:
The intercalating [Ru(TAP)2(dppz)]2+ complex can photo-oxidise guanine in DNA, although in mixed-sequence DNA it can be difficult to understand the precise mechanism due to uncertainties in where and how the complex is bound. Replacement of guanine with the less oxidisable inosine (I) base can be used to understand the mechanism of electron transfer (ET). Here the ET has been compared for both L- and D-enantiomers of [Ru(TAP)2(dppz)]2+ in a set of sequences where guanines in the readily oxidisable GG step in {TCGGCGCCGA}2 have been replaced with I. The ET has been monitored using picosecond and nanosecond transient absorption and ps-time-resolved IR spectroscopy. In both cases inosine replacement leads to a diminished yield, but the trends are strikingly different for L- and D-complexes.
Resumo:
It is known that roots can respond to patches of fertility; however, root proliferation is often too slow to exploit resources fully, and organic nutrient patches may be broken down and leached, immobilized or chemically fixed before they are invaded by the root system. The ability of fungal hyphae to exploit resource patches is far greater than that of roots due to their innate physiological and morphological plasticity, which allows comprehensive exploration and rapid colonization of resource patches in soils. The fungal symbionts of ectomycorrhizal plants excrete significant quantities of enzymes such as chitinases, phosphatases and proteases. These might allow the organic residue to be tapped directly for nutrients such as N and P. Pot experiments conducted with nutrient-stressed ectomycorrhizal and control willow plants showed that when high quality organic nutrient patches were added, they were colonized rapidly by the ectomycorrhizal mycelium. These established willows (0.5 m tall) were colonized by Hebeloma syrjense P. Karst. for 1 year prior to nutrient patch addition. Within days after patch addition, colour changes in the leaves of the mycorrhizal plants (reflecting improved nutrition) were apparent, and after I month the concentration of N and P in the foliage of mycorrhizal plants was significantly greater than that in non-mycorrhizal plants subject to the same nutrient addition. It seems likely that the mycorrhizal plants were able to compete effectively with the wider soil microbiota and tap directly into the high quality organic resource patch via their extra-radical mycelium. We hypothesize that ectomycorrhizal plants may reclaim some of the N and P invested in seed production by direct recycling from failed seeds in the soil. The rapid exploitation of similar discrete, transient, high-quality nutrient patches may have led to underestimations when determining the nutritional benefits of ectomycorrhizal colonization.
Resumo:
Purpose: The purpose of this study was to evaluate, in vitro, the contamination of toothbrushes and pacifiers by Streptococcus mutans, and the efficacy of microwave and chlorhexidine for their disinfection. Methods: Sixty pacifiers and 60 toothbrushes were contaminated with S mutans and then divided into groups according to the disinfection protocol: Group 1-chlorhexidine solution; Group 2-microwave sterilization; and Group 3-sterile tap water. The devices were evaluated microbiologically as to the formation of S mutans colonies/biofilms and were examined by scanning electron microscopy. The results were submitted for statistical analysis by Friedman`s test at a 5% significance level. Results: The results of both types of evaluation showed a large number of S mutans colonies/biofilms after spraying with sterile tap water, and chlorhexidine spraying and microwaving were effective in eliminate colonies/biofilms. Groups 1 and 2 were statistically similar to each other (P>.05) and differed significantly from Group 3 (P<.05). Conclusions: The 0.12% chlorhexidine solution spray and 7 minutes of microwave irradiation were effective for disinfection of pacifiers and toothbrushes. (Pediatr Dent 2011;33:10-3) Received July 29, 2009 I Last Revision January 26, 2010 I Accepted March 10, 2010
Resumo:
Extracellular signal-regulated kinase (ERK) 1/2 has been reported to play a role in vascular dysfunction associated with mineralocorticoid hypertension. We hypothesized that, compared with female rats, an upregulation of ERK1/2 signaling in the vasculature of male rats contributes to augmented contractile responses in mineralocorticoid hypertension. Uninephrectomized male and female Sprague-Dawley rats received desoxycorticosterone acetate (DOCA) pellets (200 mg per animal) and saline to drink for 3 weeks. Control uninephrectomized rats received tap water to drink. Blood pressure, measured by telemetry, was significantly higher in male DOCA rats (191 +/- 3 mm Hg) compared with female DOCA rats (172 +/- 7 mm Hg; n=5). DOCA treatment resulted in augmented contractile responses to phenylephrine in aorta (22 +/- 3 mN; n=6) and small mesenteric arteries (13 +/- 2 mN; n=6) from male DOCA rats versus uninephrectomized male rats (16 +/- 3 and 10 +/- 2 mN, respectively; P<0.05) and female DOCA rats (15 +/- 1 and 11 +/- 1 mN, respectively). ERK1/2 inhibition with PD-98059 (10 mu mol/L) abrogated increased contraction to phenylephrine in aorta (14 +/- 2 mN) and small mesenteric arteries (10 +/- 2 mN) from male DOCA rats, without any effects in arteries from male uninephrectomized or female animals. Compared with the other groups, phosphorylated ERK1/2 levels were increased in the aorta from male DOCA rats, whereas mitogen-activated protein kinase phosphatase 1 expression was decreased. Interleukin-10 plasma levels, which positively regulate mitogen-activated protein kinase phosphatase 1 activity, were reduced in male DOCA-salt rats. We speculate that augmented vascular reactivity in male hypertensive rats is mediated via activation of the ERK1/2 pathway. In addition, mitogen-activated protein kinase phosphatase 1 and interleukin 10 play regulatory roles in this process. (Hypertension. 2010; 55: 172-179.)
Resumo:
Objective To design, develop and set up a web-based system for enabling graphical visualization of upper limb motor performance (ULMP) of Parkinson’s disease (PD) patients to clinicians. Background Sixty-five patients diagnosed with advanced PD have used a test battery, implemented in a touch-screen handheld computer, in their home environment settings over the course of a 3-year clinical study. The test items consisted of objective measures of ULMP through a set of upper limb motor tests (finger to tapping and spiral drawings). For the tapping tests, patients were asked to perform alternate tapping of two buttons as fast and accurate as possible, first using the right hand and then the left hand. The test duration was 20 seconds. For the spiral drawing test, patients traced a pre-drawn Archimedes spiral using the dominant hand, and the test was repeated 3 times per test occasion. In total, the study database consisted of symptom assessments during 10079 test occasions. Methods Visualization of ULMP The web-based system is used by two neurologists for assessing the performance of PD patients during motor tests collected over the course of the said study. The system employs animations, scatter plots and time series graphs to visualize the ULMP of patients to the neurologists. The performance during spiral tests is depicted by animating the three spiral drawings, allowing the neurologists to observe real-time accelerations or hesitations and sharp changes during the actual drawing process. The tapping performance is visualized by displaying different types of graphs. Information presented included distribution of taps over the two buttons, horizontal tap distance vs. time, vertical tap distance vs. time, and tapping reaction time over the test length. Assessments Different scales are utilized by the neurologists to assess the observed impairments. For the spiral drawing performance, the neurologists rated firstly the ‘impairment’ using a 0 (no impairment) – 10 (extremely severe) scale, secondly three kinematic properties: ‘drawing speed’, ‘irregularity’ and ‘hesitation’ using a 0 (normal) – 4 (extremely severe) scale, and thirdly the probable ‘cause’ for the said impairment using 3 choices including Tremor, Bradykinesia/Rigidity and Dyskinesia. For the tapping performance, a 0 (normal) – 4 (extremely severe) scale is used for first rating four tapping properties: ‘tapping speed’, ‘accuracy’, ‘fatigue’, ‘arrhythmia’, and then the ‘global tapping severity’ (GTS). To achieve a common basis for assessment, initially one neurologist (DN) performed preliminary ratings by browsing through the database to collect and rate at least 20 samples of each GTS level and at least 33 samples of each ‘cause’ category. These preliminary ratings were then observed by the two neurologists (DN and PG) to be used as templates for rating of tests afterwards. In another track, the system randomly selected one test occasion per patient and visualized its items, that is tapping and spiral drawings, to the two neurologists. Statistical methods Inter-rater agreements were assessed using weighted Kappa coefficient. The internal consistency of properties of tapping and spiral drawing tests were assessed using Cronbach’s α test. One-way ANOVA test followed by Tukey multiple comparisons test was used to test if mean scores of properties of tapping and spiral drawing tests were different among GTS and ‘cause’ categories, respectively. Results When rating tapping graphs, inter-rater agreements (Kappa) were as follows: GTS (0.61), ‘tapping speed’ (0.89), ‘accuracy’ (0.66), ‘fatigue’ (0.57) and ‘arrhythmia’ (0.33). The poor inter-rater agreement when assessing “arrhythmia” may be as a result of observation of different things in the graphs, among the two raters. When rating animated spirals, both raters had very good agreement when assessing severity of spiral drawings, that is, ‘impairment’ (0.85) and irregularity (0.72). However, there were poor agreements between the two raters when assessing ‘cause’ (0.38) and time-information properties like ‘drawing speed’ (0.25) and ‘hesitation’ (0.21). Tapping properties, that is ‘tapping speed’, ‘accuracy’, ‘fatigue’ and ‘arrhythmia’ had satisfactory internal consistency with a Cronbach’s α coefficient of 0.77. In general, the trends of mean scores of tapping properties worsened with increasing levels of GTS. The mean scores of the four properties were significantly different to each other, only at different levels. In contrast from tapping properties, kinematic properties of spirals, that is ‘drawing speed’, ‘irregularity’ and ‘hesitation’ had a questionable consistency among them with a coefficient of 0.66. Bradykinetic spirals were associated with more impaired speed (mean = 83.7 % worse, P < 0.001) and hesitation (mean = 77.8% worse, P < 0.001), compared to dyskinetic spirals. Both these ‘cause’ categories had similar mean scores of ‘impairment’ and ‘irregularity’. Conclusions In contrast from current approaches used in clinical setting for the assessment of PD symptoms, this system enables clinicians to animate easily and realistically the ULMP of patients who at the same time are at their homes. Dynamic access of visualized motor tests may also be useful when observing and evaluating therapy-related complications such as under- and over-medications. In future, we foresee to utilize these manual ratings for developing and validating computer methods for automating the process of assessing ULMP of PD patients.
Resumo:
Objective: To define and evaluate a Computer-Vision (CV) method for scoring Paced Finger-Tapping (PFT) in Parkinson's disease (PD) using quantitative motion analysis of index-fingers and to compare the obtained scores to the UPDRS (Unified Parkinson's Disease Rating Scale) finger-taps (FT). Background: The naked-eye evaluation of PFT in clinical practice results in coarse resolution to determine PD status. Besides, sensor mechanisms for PFT evaluation may cause patients discomfort. In order to avoid cost and effort of applying wearable sensors, a CV system for non-invasive PFT evaluation is introduced. Methods: A database of 221 PFT videos from 6 PD patients was processed. The subjects were instructed to position their hands above their shoulders besides the face and tap the index-finger against the thumb consistently with speed. They were facing towards a pivoted camera during recording. The videos were rated by two clinicians between symptom levels 0-to-3 using UPDRS-FT. The CV method incorporates a motion analyzer and a face detector. The method detects the face of testee in each video-frame. The frame is split into two images from face-rectangle center. Two regions of interest are located in each image to detect index-finger motion of left and right hands respectively. The tracking of opening and closing phases of dominant hand index-finger produces a tapping time-series. This time-series is normalized by the face height. The normalization calibrates the amplitude in tapping signal which is affected by the varying distance between camera and subject (farther the camera, lesser the amplitude). A total of 15 features were classified using K-nearest neighbor (KNN) classifier to characterize the symptoms levels in UPDRS-FT. The target ratings provided by the raters were averaged. Results: A 10-fold cross validation in KNN classified 221 videos between 3 symptom levels with 75% accuracy. An area under the receiver operating characteristic curves of 82.6% supports feasibility of the obtained features to replicate clinical assessments. Conclusions: The system is able to track index-finger motion to estimate tapping symptoms in PD. It has certain advantages compared to other technologies (e.g. magnetic sensors, accelerometers etc.) for PFT evaluation to improve and automate the ratings
Resumo:
O desenvolvimento de projetos de interfaces gráficas está apoiado em guias de recomendações. Estes guias apresentam regras genéricas aos projetos de Interfaces Homem Computador–IHC. Entretanto, aplicações particulares, como as educacionais, não encontram regras específicas que atendam as necessidades do usuário-alvo. Ainda, a análise comparativa entre guias disponíveis aponta contradições entre as recomendações genéricas com aquelas específicas aplicadas a um determinado ambiente. A necessidade de um modelo de referência para a construção de interfaces gráficas amigáveis ao usuário e a escassez e contradições de recomendações específicas às aplicações educacionais motivaram o trabalho de pesquisa prática junto aos usuáriosalvo. Para a identificação das recomendações sobre aspectos gráficos básicos e elementos de navegação necessários a uma efetiva interação com interfaces dedicadas a aplicações educacionais, foi desenvolvido um instrumento de pesquisa que permitiu a investigação das preferências relativas aos aspectos pesquisados junto ao público-alvo. Os dados coletados foram tratados estatisticamente e os resultados obtidos contrariam tanto critérios adotados em interfaces de sistemas de ensino disponíveis na Internet como algumas recomendações sobre os mesmos disponíveis na literatura. Os resultados obtidos apontam, também, para a preferência dos usuários por elementos de navegação que não são referidos nos guias de recomendações consultados. A análise dos resultados possibilitou a geração de um modelo básico que recomenda preferências sobre aspectos gráficos básicos, como aplicação de cores em fontes e fundos de tela, tipologia de fontes para textos e paginação, e também, sobre componentes de navegação, como posicionamento e preferência por tipo de recurso de navegação. O modelo proposto está fundamentado nas recomendações de Nielsen [NIE 00], o qual recomenda que as necessidades dos usuários na interatividade com a interface sejam identificadas junto a estes usuários. As recomendações apresentadas neste trabalho foram utilizadas, inicialmente, nos ambientes educacionais desenvolvidos dentro dos projetos Tapejara [TAP 00] e LaVia [LAV 00].
Resumo:
Lenders can tap into multiple sources of private information to assess consumer credit risk but little is known about the informational synergies between these sources. Using unique panel data on checking accounts and credit card accounts from the same customers during 2007-2014, we find that activity measures from both account types contain information beyond credit scores and other controls. Checking accounts display warning indications earlier and more accurately than credit card accounts. We also investigate the consistency of information, the reasons for defaults, and selection effects. The evidence highlights sizeable informational synergies that lenders can use to manage credit relationships.
Resumo:
Fifty percent of the European Union’s population suffers from an oral disease. Studies have repeatedly shown that while acquiring healthy toothbrushing practices early on in one’s life is of significance, children and adults often fail to adhere to those. In this thesis we attempt to design and prototype interactive technologies that motivate healthy tooth brushing habits on individuals. Rather than focusing on the technologies’ persuasive power over individuals, we tap on the social mechanisms employed by families. In this sense, we think of these technologies as social translucent rather than persuasive, whose goal is to raise awareness within the family on each other’s habits and that aim at leveraging families’ existing social mechanisms for behavior change, rather than replacing them. More specifically, we aim to gain insights with respect to the following questions: a) What are the drivers and barriers towards adhering to healthy tooth brushing behaviors? b) Can we effectively measure toothbrushing behaviors? c) How can technologies leverage family communication practices in motivating proper toothbrushing behaviors? First, we present two studies about children and adults’ tooth brushing behaviors and how these are influenced by social interactions within the family. Secondly, we present the design and prototyping of two systems that sense toothbrushing practices and provide feedback, using the Social Translucence Framework as a design lens. We conclude with an overview of lessons learnt from the prototyping of these systems supported by an analysis of the strengths and pitfalls of the developed technologies.
Resumo:
Canine Visceral Leishmania (CVL) is an important zoonotic disease that has a world wide distribution and has a large impact on public health on the American Continent, especially in Brazil, where the nature of endemic diseases in humans affects a large part of the nation. The influence of the prevalence of CVL in the increased rate of human cases in endemic areas and in the unleashing of epidemic outbreaks shows the need for a more profound understanding, that would generate significant advances in the current measures used to control the reservoirs of sickness that are practiced by the Programa Nacional de Vigilância e Controle da Leishmaniose Visceral. The present work describes and compares the clinical-laboratorial and histopathological findings of twenty-three dogs that were naturally infected by Leishmania chagasi, from endemic areas in metropolitan Natal, Rio Grande do Norte, Brazil. These animals, that were selected and given physical and serological exams (IFI and ELISA rK-39), were classified according to the degree of clinical severity and had blood samples drawn (whole blood and serum) for a complete hemogram and a coagulogram to be done as well as biochemical tests for kidney and liver function. The confirmation of infection by L. chagasi was done after the euthanasia of the animals, through the direct demonstration of the parasite in the impression of the spleen and liver crowned with GIEMSA and through a cultivation by means of NNN/Schneider. According to the clinical evaluation, the animals were classified as asymptomatic (7), oligosymptomatic (7) and polysymptomatic (9). Among the animals that were chosen to be autopsied, there were 2 asymptomatic, 3 oligosymptomatic and 3 polysymptomatic, for the purpose of studying their histopathology, having collected fragments of the spleen, liver, kidneys and skin and were fixed in 10% tamponed formol. The comparison between the average parameters of the clinical-laboratory tested animals in the groups was done through the Student t test (a<0.05). The main clinical signals observed were lymphadenomegaly, alopecy, dermatitis, exfoliation, cutaneous ulcers, onicogriphosis and emaciation. The main clinical-laboratorial alterations established, mainly in the polysymptomatic group, were anemia, hyperproteinemia, hyperglobulinemia, alterations in the albumin/globulin ratio and increased ALT activity. Renal alterations were not verified (urea and creatinine levels were normal). Thrombocytopenia was observed in three clinical groups. However, the other indicators of coagulation function (TAP and TTPA) did not have abnormal variations. There were inflammatory infiltrations and leishmania amastigotes in the skin of polysymptomatic dogs, however, they were not found in the skin of asymptomatic animals. Hypertrophy and hyperplasia of the phagocyte mononuclear system, leishmania amastigote parasites were found in the macrophages, extramedullary hematopoiesis and degenerative alterations were detected in the spleen and liver of 8 of the animals submitted to histopathological exams. In accord with these results, it was demonstrated that the expected alterations in the hematological and biochemical parameters in function of their viscerotropic nature of CVL are mainly observed in the more advanced stages of the disease. The absence of inflammatory infiltration and parasite load in the skin suggest that infected animals without symptoms may have an importance irrelevant to the infectiousness of the vector
Resumo:
Current environmental concerns include the excessive consumption and inefficient use of non-renewable natural resources. The construction industry is considered one of the largest consumers of natural raw materials, significantly contributing to the environmental degradation of the planet. The use of calcareous quarry (RPPC) and porcelain tile polishing residues (RPP) as partial replacements of the cement in mortars is an interesting alternative to minimize the exploration of considerably large amounts of natural resources. The present study aimed at investigating the properties of fresh and hardened mortars produced using residues to replace cement. The residues used were fully characterized to determine their specific mass, unitary mass, particle size distribution and morphology, and composition. The performance of the mortars was compared to that of reference compositions, prepared without residues. A total of 18 compositions were prepared, 16 using residues and 2 reference ones. The mortars were prepared using Portland CP II F 32 cement, CH I hydrated lime, river sand and tap water. The compositions of the mortars were 1:1:6 and 1:0.5:4.5 (vol%), and water to cement ratios of 1.87 and 1.45 were used, respectively. The mortars in the fresh state were evaluated by consistency index, water retention, density of mass and incorporated air content tests. In their hardened state, the mortars were evaluated by apparent mass density, modulus of elasticity, flexural tensile strength, compressive strength and water absorption by capillarity. The mortars were also analyzed by scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction and fluorescence. Finally, they were classified according to NBR 13281 standards. The mortars prepared using residues partially replacing the cement exhibited lower modulus of elasticity compared to the reference compositions, thus improving the performance in their intended use. On the downside, the water absorption by capillarity was affected by the presence of residues and both the tensile and compressive strength were reduced. However, from the overall standpoint, the replacement of cement by calcareous quarry or porcelain tile polishing residues did not result in significant changes in the properties of the mortars. Therefore, compositions containing these residues can be used in the construction industry
Resumo:
Sementes de Psidium cattleianum foram acondicionadas em embalagens permeável, semipermeável e impermeável e armazenadas em ambiente não controlado, câmara seca e câmara fria por 1.107 dias, com o objetivo de avaliar a qualidade fisiológica. Desde o início do armazenamento das sementes, e após cada período de 123 dias, foram avaliados o teor de água, a porcentagem e o índice de velocidade de germinação e a condutividade elétrica da solução de embebição. Nos testes de germinação e de condutividade elétrica, as sementes foram previamente imersas em ácido sulfúrico durante 25 minutos, depois lavadas em água corrente e em água destilada. As sementes foram colocadas para germinar, entre vermiculita, na temperatura alternada de 20-30 ºC, sob lâmpadas fluorescentes brancas, com fotoperíodo de 8 horas. O acondicionamento das sementes em embalagem impermeável e o armazenamento em ambiente natural de laboratório ou em câmara seca, bem como o acondicionamento em embalagem semipermeável e armazenamento em câmara fria, são adequados para a conservação das sementes durante 1.107 dias.
Resumo:
In machining of internal threads, dedicated tools, known as taps, are needed for each profile type, diameter, and low cutting speed values are used when compared to main machining processes. This restriction in the cutting speed is associated with the difficulty of synchronizing the tool s rotation speed and feed velocity in the process. This fact restricts the flexibility and makes machining lead times longer when manufacturing of components with threads is required. An alternative to the constraints imposed by the tap is the thread milling with helical interpolation technique. The technique is the fusion of two movements: rotation and helical interpolation. The tools may have different configurations: a single edge or multiple edges (axial, radial or both). However, thread milling with helical interpolation technique is relatively new and there are limited studies on the subject, a fact which promotes challenges to its wide application in the manufacturing shop floor. The objective of this research is determine the performance of different types of tools in the thread milling with helical interpolation technique using hardened steel workpieces. In this sense, four tool configurations were used for threading milling in AISI 4340 quenched and tempered steel (40 HRC). The results showed that climb cut promoted a greater number of machined threads, regardless of tool configuration. The upcut milling causes chippings in cutting edge, while the climb cutting promotes abrasive wear. Another important point is that increase in hole diameter by tool diameter ratio increases tool lifetime
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Aims: The aim of this study was to identify and determine the diversity, occurrence and distribution of fungi in water used at a haemodialysis centre.Methods and Results: Samples in the hydraulic circuit for the distribution of the water, dialysate samples and samples of sterilization solution from dialysers were collected over a 3-month period, and 500 ml of each sample was filtered through membranes. All together 116 isolates of fungi were recovered from 89% of all water samples collected inside the haemodialysis unit, with prevalence of moulds in tap water samples and of yeasts in dialysate samples. Fusarium spp. was the most abundant genus found, whereas Candida parapsilosis was the predominant yeast species.Conclusions: This study demonstrated that various fungi were present in the water system. These data suggest the inclusion of the detection and quantification of fungi in the water of haemodialysis.Significance and Impact of the Study: The recovery of fungi from aqueous haemodialysis environments implies a potential risk for haemodialysis patients and indicates the need for continuous maintenance and monitoring. Further studies on fungi in haemodialysis water systems are required to investigate the organism ability to persist, their role in biofilm formation and their clinical significance.