Renewable Energy via Photocatalysis

The generation of renewable energy through photocatalysis is an attractive option to utilize the abundantly available solar radiation for a sustainable future. Photocatalysis refers to charge-carrier, i.e. electron and hole, mediated reactions occurring on a semiconductor surface in presence of ultraviolet or visible light radiation. Photocatalysis is a well established advanced oxidation technique for the decontamination of toxic organic pollutants to CO2 and H2O. However, the generation of energy in the form of hydrogen, hydrocarbon fuels and electricity via photocatalysis is an upcoming field with great many technical challenges towards practical implementation. This review will describe the fundamental reaction mechanism of (i) photocatalytic water splitting, (ii) photocatalytic H-2 generation in presence of different sacrificial agents, (iii) H-2 and electricity generation in a photofuel cell, (iv) photocatalytic reduction of CO2 to hydrocarbons and useful chemicals, and (v) photocatalytic water-gas shift reaction. A historic and recent perspective of the above conversion techniques, especially with regard to the development of TiO2-based and non-TiO2 materials is provided. The activity of different materials for the above reactions based on quantifiers like reaction rate, quantum yield and incident-photon-to-current efficiency is compared, and key design considerations of the ``best'' photocatalyst or photoelectrode is outlined. An overall assessment of the research area indicates that the presently achieved quantum efficiencies for the above reactions are rather moderate in the visible region, and the goal is to develop a catalyst that absorbs visible radiation, provides good charge-carrier separation, and exhibits high stability for long periods of usage.

Tension and Ampacity Monitoring System for Overhead Lines

Real time monitoring allows the determination of the line state and the calculation of the actual rating value. The real time monitoring systems measure sag, conductor tension, conductor temperature or weather related magnitudes. In this paper, a new ampacity monitoring system for overhead lines, based on the conductor tension, the ambient temperature, the solar radiation and the current intensity, is presented. The measurements are transmitted via GPRS to a control center where a software program calculates the ampacity value. The system takes into account the creep deformation experienced by the conductors during their lifetime and calibrates the tension-temperature reference and the maximum allowable temperature in order to obtain the ampacity. The system includes both hardware implementation and remote control software.

An evaluation of the pelagic primary productivity and potential fish yield of Kainji Lake, Nigeria

The environmental conditions of Kainji Lake from 1971/72 to date appear to have stabilized to a large extent, judging from the similarity of physico-chemical parameters investigated in this study over the period. Solar radiation (as reflected in variation in temperature) and pH have remained largely constant over the years, while conductivity (index of nutrient enrichment), though significantly higher in 1995/96, could be described as sporadic and needs further monitoring to ascertain its trend in the lake. While water transparency and dissolved oxygen were higher in 1971/72 compared to the other years, these increases cannot be said to be overwhelming. The lower transparency in 1995/96 was due to the exceptional flood of that year and may have also accounted for the poorer dissolved oxygen concentration compared to the other years due to its impact on photosynthesis. There is no evidence from this study to indicate that primary productivity has increased over the years. Consequently, the observed increase in fish yield by the KLFPP from CAS, which is corroborated by estimates from the MEI, cannot be supported on the basis of improved photosynthetic production. The phenomenal high levels of conductivity recorded during certain periods in 1995 (600 mu mhos cm super(-1)) are hitherto unknown in the lake and may indicate a trend towards nutrient enrichment. However, it is premature at this stage to conclude on its long-term impact on primary production and consequently, on fish yield. Secondly, the notion of overfishing in the 80s (Ita, 1993), may need to be further examined as low or dwindling catches could be due to a number of factors among which are the level of fishing effort, the type and efficiency of gears and the intensity of sampling. It would appear that with the intervention of KLFPP, the better management of the lake's fisheries would increase the current level of catch. It also needs to be examined how much of the clupeid fisheries, which is now known to account for a substantial proportion of the total fish yield in Kainji Lake, was included in the sampling of the 80s. (PDF contains 43 pages)

Photonic and Device Design Principles for Ultrahigh-Efficiency (>50%), Spectrum-Splitting Photovoltaics

The sun has the potential to power the Earth's total energy needs, but electricity from solar power still constitutes an extremely small fraction of our power generation because of its high cost relative to traditional energy sources. Therefore, the cost of solar must be reduced to realize a more sustainable future. This can be achieved by significantly increasing the efficiency of modules that convert solar radiation to electricity. In this thesis, we consider several strategies to improve the device and photonic design of solar modules to achieve record, ultrahigh (> 50%) solar module efficiencies. First, we investigate the potential of a new passivation treatment, trioctylphosphine sulfide, to increase the performance of small GaAs solar cells for cheaper and more durable modules. We show that small cells (mm2), which currently have a significant efficiency decrease (~ 5%) compared to larger cells (cm2) because small cells have a higher fraction of recombination-active surface from the sidewalls, can achieve significantly higher efficiencies with effective passivation of the sidewalls. We experimentally validate the passivation qualities of treatment by trioctylphosphine sulfide (TOP:S) through four independent studies and show that this facile treatment can enable efficient small devices. Then, we discuss our efforts toward the design and prototyping of a spectrum-splitting module that employs optical elements to divide the incident spectrum into different color bands, which allows for higher efficiencies than traditional methods. We present a design, the polyhedral specular reflector, that has the potential for > 50% module efficiencies even with realistic losses from combined optics, cell, and electrical models. Prototyping efforts of one of these designs using glass concentrators yields an optical module whose combined spectrum-splitting and concentration should correspond to a record module efficiency of 42%. Finally, we consider how the manipulation of radiatively emitted photons from subcells in multijunction architectures can be used to achieve even higher efficiencies than previously thought, inspiring both optimization of incident and radiatively emitted photons for future high efficiency designs. In this thesis work, we explore novel device and photonic designs that represent a significant departure from current solar cell manufacturing techniques and ultimately show the potential for much higher solar cell efficiencies.

El soleamiento en las fachadas, técnicas para su reducción y pre dimensionamiento.

[EU]Lan honen helburu nagusia eraikuntzan gehituko diren argi-babeski sistema mota desberdinak aurkeztea da, bertan ematen den energia kontsumoa murrizteko asmoz. Izan ere, argi naturalaren erabilpen egoki batek eraikinaren efizientzia hobetzera eramango gaitu. Horretarako, ezinbestekoa izango da baliabide hau behar bezala ezagutzea, argitasuna eta beharrezko babesa eskaintzeko, eta ondorioz, energia aurreztea lortzeko. Babes sistema egokiena aukeratu baino lehen, aldez aurretik sortu izan diren argi-babeski mota desberdinak aztertu izan dira. Horrez gain, eguzki erradiazioa neurtzeko metodo grafiko eta analitikoak ere aztertu dira. Ondoren, Ecotect programak eskaintzen dituen simulazioei esker, eguzki erradiazioaren datu zehatzagoak lortzeko asmoz, ikasketa horretan erabiliko den eraikinaren kokapena, orientazioa eta ezaugarriak erabaki dira. Behin prototipoa definituta, programa bidez lau babes sistema mota desberdinak aztertu dira, horrela babesik gabeko eraikinean lortutako datuak alderatzeko. Azterketa Bilbo eta Sevillan egitea erabaki izan da. Izan ere, bi hiriburu hauek klimatologian duten desberdintasuna argi-babeskien aukeraketan duen eragina aztertzeko aukeratu dira, gainera, orientazioak eta argi babeskien dimentsioek ere izan dute zer esana aukeraketa garaian. Horrez gain, argi-babeskiek sortutako itzala ere aztertu izan da. Horrela, sistema hauen jarrera orokorra ikusi daiteke, eta beraz, uda garaian babesteko eta negu garaian eguzki izpiak sartzen uzteko duten ahalmena ikusi da. Bukatzeko, aurretik lortutako datu guztiei esker, eta bai kokapena zein orientazioa kontutan hartuz, babes sistema egokiena aukeratu da, jakinik ezinbestekoa dela argitasuna, babesa eta aurrezte energetikoaren arteko oreka egoki bat lortzea.

Morfo-anatomia foliar comparada de Coccocypselum lanceolatum (RUIZ & PAVON) PERSOON (RUBIACEAE) ocorrente em duas regiões distintas de Mata Atlântica

A Mata Atlântica figura entre os biomas com o maior índice de biodiversidade, mais ameaçados e menos conhecidos cientificamente do planeta. Nesse bioma, a família Rubiaceae se destaca como a quarta mais importante em número de espécies e indivíduos. Com o objetivo de aumentar o conhecimento relativo ao bioma e à família em questão, este trabalho propõe o estudo de Coccocypselum lanceolatum (Ruiz & Pavon) Persoon, uma espécie de hábito herbáceo frequente em diferentes fitofisionomias de Mata Atlântica no estado do Rio de Janeiro. O trabalho visa comparar a estrutura morfo-anatômica da espécie crescendo em Floresta Ombrófila Densa submontana, em região insular e Floresta Ombrófila Densa montana, em região continental. A pesquisa foi desenvolvida em dois remanescentes de Mata Atlântica no estado do Rio de Janeiro: Parque Estadual da Ilha Grande, no município de Angra dos Reis e Parque Ambiental Luiz Simões Lopes, município de Nova Friburgo. Foi feita a avaliação dos seguintes parâmetros ambientais: pluviosidade, temperatura, radiação solar e características do solo. Para a análise morfológica foliar, foram coletadas 25 folhas completamente expandidas, provenientes do 3 ou 4 nós, observando-se a mesma estação climática, entre os meses de maio e junho de 2010 (outono) nos dois sítios de estudo. Para o estudo anatômico foram selecionadas 10 folhas completamente expandidas, provenientes do 3 ou 4 nós, as quais foram fragmentadas nos níveis do pecíolo e terço-médio. Os parâmetros utilizados para a comparação dos materiais provenientes dos diferentes sítios consistiram na espessura total da lâmina foliar, na espessura do mesofilo (m), na espessura dos parênquimas (m), paliçádico e lacunoso, na espessura das epidermes (m) nas faces adaxiais e abaxiais, e nas densidades (mm2) de estômatos e de tricomas. Os resultados obtidos mostram que a espécie apresenta variação intraespecífica, relacionada aos diferentes parâmetros ambientais avaliados em função da origem. Desta forma, foram encontradas diferenças na composição química e física e consequentemente no pH dos solos; a presença de antocianinas em órgãos diferentes das flores e dos frutos no material de Nova Friburgo; diferenças morfológicas e anatômicas relativas às diferenças nos índices pluviométricos, composição do solo e radiação solar

Photosynthetic responses of trees in high-elevation forests: comparing evergreen species along an elevation gradient in the Central Andes

Plant growth at extremely high elevations is constrained by high daily thermal amplitude, strong solar radiation and water scarcity. These conditions are particularly harsh in the tropics, where the highest elevation treelines occur. In this environment, the maintenance of a positive carbon balance involves protecting the photosynthetic apparatus and taking advantage of any climatically favourable periods. To characterize photoprotective mechanisms at such high elevations, and particularly to address the question of whether these mechanisms are the same as those previously described in woody plants along extratropical treelines, we have studied photosynthetic responses in Polylepis tarapacana Philippi in the central Andes (18 degrees S) along an elevational gradient from 4300 to 4900 m. For comparative purposes, this gradient has been complemented with a lower elevation site (3700 m) where another Polylepis species (P. rugulosa Bitter) occurs. During the daily cycle, two periods of photosynthetic activity were observed: one during the morning when, despite low temperatures, assimilation was high; and the second starting at noon when the stomata closed because of a rise in the vapour pressure deficit and thermal dissipation is prevalent over photosynthesis. From dawn to noon there was a decrease in the content of antenna pigments (chlorophyll b and neoxanthin), together with an increase in the content of xanthophyll cycle carotenoids. These results could be caused by a reduction in the antenna size along with an increase in photoprotection. Additionally, photoprotection was enhanced by a partial overnight retention of de-epoxized xanthophylls. The unique combination of all of these mechanisms made possible the efficient use of the favourable conditions during the morning while still providing enough protection for the rest of the day. This strategy differs completely from that of extratropical mountain trees, which uncouple light-harvesting and energy-use during long periods of unfavourable, winter conditions.

Dinâmica de crescimento em Tabebuia rosea (Bertol.) Bertero ex A.DC. (Bignoniaceae): fenologia apical e cambial caulinar

O estudo da dinâmica de crescimento em espécies arbóreas permite melhor compreender a adaptação de uma espécie ao ambiente em que se desenvolve. Dados dessa natureza ainda são escassos no Brasil considerando-se a diversidade de espécies e fitofisionomias existentes. Esse tipo de estudo tem sido apontado como de grande relevância principalmente diante das situações atuais de desmatamento e mudanças climáticas, que exigem recuperação de áreas degradadas e prospectar como as espécies nativas sobreviveram diante deste ambiente de aceleradas mudanças. Nesta perspectiva, o objetivo deste trabalho foi investigar a dinâmica de crescimento de Tabebuia rosea, por meio do monitoramento mensal da fenologia apical e cambial caulinar e dos teores dos pigmentos fotossintetizantes: clorofilas a, b, totais e carotenoides. Os resultados obtidos foram correlacionados entre si e também com a sazonalidade das variáveis ambientais: temperatura, precipitação e fotoperíodo. No que se refere aos teores dos pigmentos fotossintetizantes, foi também avaliada as oscilações observadas nas folhas obtidas nas orientações geográficas: norte, sul, leste e oeste. O trabalho foi desenvolvido no Campus da Universidade do Estado do Rio de Janeiro, RJ, Brasil. A fenologia dos ápices caulinares foi acompanhada mensalmente a partir de observações qualitativas e quantitativas em 15 indivíduos. As amostras contendo a zona cambial foram obtidas por método não destrutivo e processadas segundo as técnicas usuais em histologia vegetal. A extração dos pigmentos fotossintéticos foi realizada em acetona 80%, com posterior centrifugação e análise ao espectrofotômetro em diferentes comprimentos de onda. Tabebuia rosea apresentou aumento na largura da zona cambial em número de camadas celulares e em micrômetros, diminuição do diâmetro radial da célula inicial fusiforme e aumento em micrômetros da camada de células em processo de alongamento e diferenciação do xilema secundário no mesmo período em que a copa das árvores estava ocupada por folhas adultas e com os teores mais elevados de clorofilas nas folhas, coincidindo com o período em que as variáveis ambientais apresentaram-se elevadas, corroborando os resultados já obtidos para outras espécies nativas da Mata Atlântica se desenvolvendo no estado do Rio de Janeiro. A maior concentração de carotenoides foi observada no período em que as variáveis ambientais apresentavam índices elevados e as plantas estavam mais expostas à radiação luminosa, possivelmente em função de um maior investimento em fotoproteção. Cabe destacar que o lado oeste da copa das árvores mostrou uma tendência em apresentar maiores concentrações dos pigmentos fotossintéticos estudados, resultado ainda não observado na literatura até o momento, o que pode ser uma estratégia da espécie em compensar níveis baixos de radiação solar com acúmulo de clorofilas.

Estudo de níveis de ozônio troposférico usando métodos de estatística univariada e multivariada para duas localidades da cidade do Rio de Janeiro

Com cada vez mais intenso desenvolvimento urbano e industrial, atualmente um desafio fundamental é eliminar ou reduzir o impacto causado pelas emissões de poluentes para a atmosfera. No ano de 2012, o Rio de Janeiro sediou a Rio +20, a Conferência das Nações Unidas sobre Desenvolvimento Sustentável, onde representantes de todo o mundo participaram. Na época, entre outros assuntos foram discutidos a economia verde e o desenvolvimento sustentável. O O3 troposférico apresenta-se como uma variável extremamente importante devido ao seu forte impacto ambiental, e conhecer o comportamento dos parâmetros que afetam a qualidade do ar de uma região, é útil para prever cenários. A química das ciências atmosféricas e meteorologia são altamente não lineares e, assim, as previsões de parâmetros de qualidade do ar são difíceis de serem determinadas. A qualidade do ar depende de emissões, de meteorologia e topografia. Os dados observados foram o dióxido de nitrogênio (NO2), monóxido de nitrogênio (NO), óxidos de nitrogênio (NOx), monóxido de carbono (CO), ozônio (O3), velocidade escalar vento (VEV), radiação solar global (RSG), temperatura (TEM), umidade relativa (UR) e foram coletados através da estação móvel de monitoramento da Secretaria do Meio Ambiente (SMAC) do Rio de Janeiro em dois locais na área metropolitana, na Pontifícia Universidade Católica (PUC-Rio) e na Universidade do Estado do Rio de Janeiro (UERJ) no ano de 2011 e 2012. Este estudo teve três objetivos: (1) analisar o comportamento das variáveis, utilizando o método de análise de componentes principais (PCA) de análise exploratória, (2) propor previsões de níveis de O3 a partir de poluentes primários e de fatores meteorológicos, comparando a eficácia dos métodos não lineares, como as redes neurais artificiais (ANN) e regressão por máquina de vetor de suporte (SVM-R), a partir de poluentes primários e de fatores meteorológicos e, finalmente, (3) realizar método de classificação de dados usando a classificação por máquina de vetor suporte (SVM-C). A técnica PCA mostrou que, para conjunto de dados da PUC as variáveis NO, NOx e VEV obtiveram um impacto maior sobre a concentração de O3 e o conjunto de dados da UERJ teve a TEM e a RSG como as variáveis mais importantes. Os resultados das técnicas de regressão não linear ANN e SVM obtidos foram muito próximos e aceitáveis para o conjunto de dados da UERJ apresentando coeficiente de determinação (R2) para a validação, 0,9122 e 0,9152 e Raiz Quadrada do Erro Médio Quadrático (RMECV) 7,66 e 7,85, respectivamente. Quanto aos conjuntos de dados PUC e PUC+UERJ, ambas as técnicas, obtiveram resultados menos satisfatórios. Para estes conjuntos de dados, a SVM mostrou resultados ligeiramente superiores, e PCA, SVM e ANN demonstraram sua robustez apresentando-se como ferramentas úteis para a compreensão, classificação e previsão de cenários da qualidade do ar

Nutrient enhanced coastal ocean productivity in the north Gulf of Mexico: understanding the effects of nutrients on a coastal ecosystem

The continental shelf adjacent to the Mississippi River is a highly productive system, often referred to as the fertile fisheries crescent. This productivity is attributed to the effects of the river, especially nutrient delivery. In the later decades of the 2oth century, though, changes in the system were becoming evident. Nutrient loads were seen to be increasing and reports of hypoxia were becoming more frequent. During most recent summers, a broad area (up to 20,000 krn2) of near bottom, inner shelf waters immediately west of the Mississippi River delta becomes hypoxic (dissolved oxygen concentrations less than 2 mgll). In 1990, the Coastal Ocean Program of the National Oceanic and Atmospheric Administration initiated the Nutrient Enhanced Coastal Ocean Productivity (NECOP) study of this area to test the hypothesis that anthropogenic nutrient addition to the coastal ocean has contributed to coastal eutrophication with a significant impact on water quality. Three major goals of the study were to determine the degree to which coastal productivity in the region is enhanced by terrestrial nutrient input, to determine the impact of enhanced productivity on water quality, and to determine the fate of fixed carbon and its impact on living marine resources. The study involved 49 federal and academic scientists from 14 institutions and cost $9.7 million. Field work proceeded from 1990 through 1993 and analysis through 1996, although some analyses continue to this day. The Mississippi River system delivers, on average, 19,000 m3/s of water to the northern Gulf of Mexico. The major flood of the river system occurs in spring following snow melt in the upper drainage basin. This water reaches the Gulf of Mexico through the Mississippi River birdfoot delta and through the delta of the Atchafalaya River. Much of this water flows westward along the coast as a highly stratified coastal current, the Louisiana Coastal Current, isolated from the bottom by a strong halocline and from mid-shelf waters by a strong salinity front. This stratification maintains dissolved and particulate matter from the rivers, as well as recycled material, in a well-defined flow over the inner shelf. It also inhibits the downward mixing of oxygenated surface waters from the surface layer to the near bottom waters. This highly stratified flow is readily identifiable by its surface turbidity, as it carries much of the fine material delivered with the river discharge and resuspended by nearshore wave activity. A second significant contribution to the turbidity of the surface waters is due to phytoplankton in these waters. This turbidity reduces the solar radiation penetrating to depth through the water column. These two aspects of the coastal current, isolation of the inner shelf surface waters and maintenance of a turbid surface layer, precondition the waters for the development of near bottom summer hypoxia.

暖温带落叶阔叶混交林能量生态学研究

本文是首篇研究中国暖温带落叶阔叶混交林能量生态学的论文。在文中，笔者以详实的第一手资料从能量环境、能量流动、能量组合以及能量平衡几个方面，全面、系统地阐述、分析了辽东栎林——这一暖温带落叶阔叶混交林典型自然群落代表的能量生态学特征。 在能量环境一章中，笔者从能量流动，能量平衡的角度出发重点研究了辽东栎群落的辐射能量环境特征。笔者以1991-1993年的观测资料为基础，从乔木、灌木和草本三个层次分析了生长季总辐射、散射辐射、直射辐射、反射辐射、净辐射、先合有效辐射、透射辐射、吸收辐射以及乔木层和灌木层反射率的季节动态和日进程特征，并从天文因子、气象因子和群落自身发育特征几方面解释分析了辐射能量环境的这种时空动态特征，同时，分析了这种变化特征对群落能量流动、分配和平衡过程可能产生的影响。 另外，笔者也对群落湿度和风速环境的时空动态特征进行了分析。 在能量流动一章，笔者以1992-1993年的野外实验资料为依据，沿季节动态、月际变化和日进程的时间轴，从群落、乔木层、灌木层、草本层以及各乔、灌木种群的空间尺度详细分析、阐述了太阳辐射能在森林群落内的流动和转化特征，并从能量环境和群落发育的角度解释分析了能量在群落内的这种时空分布和转化特征。所讨论的能流对象包括群落、乔、灌、草各层及各乔、灌木种群的总能流固定量、叶片呼吸耗能量、剩余能流固定量以及沿枯枝落叶流出的能流量。 与分析能流过程同步，笔者从上述的时、空尺度分别以生长季内太阳总辐射和光合有效辐射为基础计算、分析了森林群落的光能转化率特征。 在这一章的最后，笔者概述性地介绍了辽东栎群落的能量平衡特征 在第四章，笔者从能值的角度出发，以能量密度为标准讨论了能量沿群落各层及各乔、灌木种群的积累、分配和组合特征，并讨论了能量流动和光能转化率与热值和能量密度的关系。 辽东栎群落能量生态学的研究不但为了解暖温带落叶阔叶林生态系统的结构和功能，为恢复和重建退化的森林生态系统提供了丰富详实的理论信息，而且，也为山区人工林优化模式的组建提供了理论依据和实践指南。

Interactions between building integrated photovoltaics and microclimate in urban environments

BIPV (building integrated photovoltaics) has progressed in the past years and become an element to be considered in city planning. BIPV has significant influence on microclimate in urban environments and the performance of BIPV is also affected by urban climate. The thermal model and electrical performance model of ventilated BIPV are combined to predict PV temperature and PV power output in Tianjin, China. Then, by using dynamic building energy model, the building cooling load for installing BIPV is calculated. A multi-layer model AUSSSM of urban canopy layer is used to assess the effect of BIPV on the Urban Heat Island (UHI). The simulation results show that in comparison with the conventional roof, the total building cooling load with ventilation PV roof may be decreased by 10%. The UHI effect after using BIPV relies on the surface absorptivity of original building. In this case, the daily total PV electricity output in urban areas may be reduced by 13% compared with the suburban areas due to UHI and solar radiation attenuation because of urban air pollution. The calculation results reveal that it is necessary to pay attention to and further analyze interactions between BIPV and microdimate in urban environments to decrease urban pollution, improve BIPV performance and reduce cooling load. Copyright © 2006 by ASME.

Effect of building integrated photovoltaics on microclimate of urban canopy layer

Building integrated photovoltaics (BIPV) has potential of becoming the mainstream of renewable energy in the urban environment. BIPV has significant influence on the thermal performance of building envelope and changes radiation energy balance by adding or replacing conventional building elements in urban areas. PTEBU model was developed to evaluate the effect of photovoltaic (PV) system on the microclimate of urban canopy layer. PTEBU model consists of four sub-models: PV thermal model, PV electrical performance model, building energy consumption model, and urban canyon energy budget model. PTEBU model is forced with temperature, wind speed, and solar radiation above the roof level and incorporates detailed data of PV system and urban canyon in Tianjin, China. The simulation results show that PV roof and PV façade with ventilated air gap significantly change the building surface temperature and sensible heat flux density, but the air temperature of urban canyon with PV module varies little compared with the urban canyon of no PV. The PV module also changes the magnitude and pattern of diurnal variation of the storage heat flux and the net radiation for the urban canyon with PV increase slightly. The increase in the PV conversion efficiency not only improves the PV power output, but also reduces the urban canyon air temperature. © 2006.

Effect of urban climate on building integrated photovoltaics performance

It is generally recognized that BIPV (building integrated photovoltaics) has the potential to become a major source of renewable energy in the urban environment. The actual output of a PV module in the field is a function of orientation, total irradiance, spectral irradiance, wind speed, air temperature, soiling and various system-related losses. In urban areas, the attenuation of solar radiation due to air pollution is obvious, and the solar spectral content subsequently changes. The urban air temperature is higher than that in the surrounding countryside, and the wind speed in urban areas is usually less than that in rural areas. Three different models of PV power are used to investigate the effect of urban climate on PV performance. The results show that the dimming of solar radiation in the urban environment is the main reason for the decrease of PV module output using the climatic data of urban and rural sites in Mexico City for year 2003. The urban PV conversion efficiency is higher than that of the rural PV system because the PV module temperature in the urban areas is slightly lower than that in the rural areas in the case. The DC power output of PV seems to be underestimated if the spectral response of PV in the urban environment is not taken into account based on the urban hourly meteorological data of Sao Paulo for year 2004. © 2006 Elsevier Ltd. All rights reserved.

Reliable concentrated photovoltaic system with compound concentrator

Concentrated photovoltaic systems (CPVSs) draw more and more attention because of high photovoltaic conversion efficiency, low consumption of solar cell, and low cost of power generation. However, the fallibility of the tracker in such systems has hindered their practical application for more than twenty years. The tracker is indispensable for a CPVS since only normal-incident sunlight can be focused on the solar cell chips, even a slight deviation of incident light will result in a significant loss of solar radiation, and hence a distinct decrease in electricity output. Generally, the more accurate the tracker is, the more reliable the system is. However, it is not exactly the case for a CPVS reliability, because the more accurate the tracker is, the better environment it demands. A CPVS is usually has to subjected to harsh environmental conditions, such as strong wind, heavy rain or snow, and huge changes of temperature, which leads to the invalidation of the system's high-accuracy tracker. Hence, the reliability of a CPVS cannot be improved only by enhancing the tracker's accuracy. In this paper, a novel compound concentrator, combination of Fresnel lens and photo-funnel, has been adopted in a prototype CPVS. Test results show that the compound concentrator can relax the angle tolerance from one tenth to five degrees of arc at 400 suns, which can help a CPVS endure serious environment and remain its reliability over long period. The CPVS with compound concentrator is attractive for commercial application.