Síntese hidrotérmica assistida por micro-ondas de tiO2, e aplicação em nanocompósito

In recent decades have seen a sharp growth in the study area of nanoscience and nanotechnology and is included in this area, the study of nanocomposites with self-cleaning properties. Since titanium dioxide (TiO2) has high photocatalytic activity and also antimicrobial, self-cleaning surfaces in your application has been explored. In this study a comparison was made between two synthesis routes to obtain TiO2 nanoparticles by hydrothermal method assisted by microwave. And after analysis of XRD and SEM was considered the best material for use in nanocomposites. It was deposited nanocomposite film of poly (dimethyl siloxane) (PDMS) with 0.5, 1, 1.5 and 2% by weight of nanoparticles of titanium dioxide (TiO2) by the spraying method. The nanocomposite was diluted with hexane and the suspension was deposited onto glass substrate, followed by curing in an oven with forced air circulation. The photocatalytic activity of the nanocomposite impregnated with methylene blue was evaluated by UV- vis spectroscopy from the intensity variation of absorption main peak at 660nm with time of exposure to the UV chamber. Changes in the contact angle and microhardness were analyzed before and after UV aging test. The effect of ultraviolet radiation on the chemical structure of the PDMS matrix was evaluated by spectrophotometry Fourier transform infrared (FTIR).The results indicated that the addition of TiO2 nanoparticles in the coating PDMS gave high photocatalytic activity in the decomposition of methylene blue, an important characteristic for the development of self-cleaning coatings

Síntese e caracterização de CuNb2O6 e CuNbC através de reação sólido- sólido e gás- sólido a baixa temperatura

The refractory metal carbides have proven important in the development of engineering materials due to their properties such as high hardness, high melting point, high thermal conductivity and high chemical stability. The niobium carbide presents these characteristics. The compounds of niobium impregnated with copper also have excellent dielectric and magnetic properties, and furthermore, the Cu doping increases the catalytic activity in the oxidation processes of hydrogen. This study aimed to the synthesis of nanostructured materials CuNbC and niobium and copper oxide from precursor tris(oxalate) oxiniobate ammonium hydrate through gas-solid and solid-solid reaction, respectively. Both reactions were carried out at low temperature (1000°C) and short reaction time (2 hours). The niobium carbide was produced with 5 % and 11% of copper, and the niobium oxide with 5% of copper. The materials were characterized by X-Ray Diffraction (XRD), Rietveld refinement, Scanning Electron Microscopy (SEM), X-Ray Fluorescence Spectroscopy (XRF), infrared spectroscopy (IR), thermogravimetric (TG) and differential thermal analysis (DTA , BET and particle size Laser. From the XRD analysis and Rietveld refinement of CuNbC with S = 1.23, we observed the formation of niobium carbide and metallic copper with cubic structure. For the synthesis of mixed oxide made of niobium and copper, the formation of two distinct phases was observed: CuNb2O6 and Nb2O5, although the latter was present in small amounts

Estudo da síntese e propriedade magnética de ferritas de manganês/cobalto dopadas com níquel

For the chemical method of synthesis of co-precipitation were produced ferrite powders manganese-cobalt equal stoichiometric formula Mn (1-x) Co (x) Fe2O4, for 0 < x < 1, first reagent element using as the hydroxide ammonium and second time using sodium hydroxide. The obtained powders were calcined at 400 ° C, 650 ° C, 900 ° C and 1150 ° C in a conventional oven type furnace with an air atmosphere for a period of 240 minutes. Other samples were calcined at a temperature of 900 ° C in a controlled atmosphere of argon, to evaluate the possible influence of the atmosphere on the final results the structure and morphology. The samples were also calcined in a microwave oven at 400 ° C and 650 ° C for a period of 45 minutes possible to evaluate the performance of this type of heat treatment furnace. It was successfully tested the ability of this group include isomorphic ferrite with the inclusion of nickel cations in order to evaluate the occurrence of disorder in the crystalline structures and their changes in magnetic characteristics.To identify the structural, morphological, chemical composition and proportions, as well as their magnetic characteristics were performed characterization tests of X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDX), thermogravimetric (TG), vibrating sample magnetometry (MAV) and Mössbauer spectroscopy. These tests revealed the occurrence of distortion in the crystal lattice, changes in magnetic response, occurrence of nanosized particles and superparamagnetism

Novos monômeros obtidos a partir do metacrilato de glicidila, bisfenol A e 4, 4 isopropilidenodicicloexanol : síntese, caracterização estrutural e propriedades de compósitos para utilização em resinas de restauração dental

Nowadays, composite resins are the direct restorative materials more important in dental clinical performance, due to their versatility and aesthetic excellence. Bis-GMA (2,2-bis[4(2-hydroxy-3-metacryloxypropoxy)phenil]propane) is the base monomer more frequently used in restorative composite resins. However, this monomer presents some disadvantages, such as high viscosity and two aromatic rings in its structure that can promote allergic reactions to the humans. In this work, the main purpose was to synthesize new monomers from glycidyl methacrylate to use in dental restorative materials. Structural characterization of the monomers was carried out through FTIR and NMR 1H, and eight composites were produced from the new monomers, by addition of silane-treated alumino silicate particles (inorganic filler) and a photocuring system (camphorquinone and ethyl 4-dimethylaminebenzoate). The composites were analyzed by environmental scanning electronic microscopy and the water sorption and solubility, compressive strength and elastic modulus were determined. A commercial composite resin [Z100 (3M)] was used to comparison effect. The new composites presented general characteristics similar to the commercial ones; however, they didn t present the properties expected. This behavior was attributed to the lower degree of monomer reaction and to the granulometry and size distribution of the mineral filler in the polymeric matrix

Síntese enzimática de ésteres de açúcar: surfactantes e polímeros como novos materiais ambientalmente seguros

Sugar esters are substances which possess surfactant, antifungical and bactericidal actions and can be obtained through two renewable sources of raw materials: sugars and vegetable oils. Their excellent biodegradability, allied to lhe fact that they are non toxic, insipid, inodorous, biocompatible, no-ionic, digestible and because they can resist to adverse conditions of temperature, pH and salinity, explain lhe crescent use of these substances in several sections of lhe industry. The objective of this thesis was to synthesize and characterize surfactants and polymers containing sugar branched in their structures, through enzymatic transesterification of vinyl esters and sugars, using alkaline protease from Bacillus subtilis as catalyst, in organic medium (DMF).Three types of sugars were used: L-arabinose, D-glucose and sucrose and two types of vinyl esters: vinyl laurate and vinyl adipate. Aiming to reach high conversions from substrates to products for a possible future large scale industrial production, a serie of variables was optimized, through Design of Experiments (DOE), using Response Surface Methodology (RSM).The investigated variables were: (1) enzyme concentration; (2) molar reason of substrates; (3) water/solvent rale; (4) temperature and (5) time. We obtained six distinct sugar esters: 5-0-lauroyl L-arabinose, 6-0-lauroyl D-glucose, 1'-O-lauroyl sucrose, 5-0-vinyladipoyl L-arabinose, 6-0-vinyladipoyl D-glucose and 1 '-O-vinyladipoyl sucrose, being lhe last three polymerizable. The progress of lhe reaction was monitored by HPLC analysis, through lhe decrease of sugar concentration in comparison to lhe blank. Qualitative analysis by TLC confirmed lhe formation of lhe products. In lhe purification step, two methodologies were adopted: (1) chromatographic column and (2) extraction with hot acetone. The acylation position and lhe chemical structure were determined by 13C-RMN. The polymerization of lhe three vinyl sugar esters was possible, through chemical catalysis, using H2O2 and K2S2O8 as initiators, at 60°C, for 24 hours. IR spectra of lhe monomers and respective polymers were compared revealing lhe disappearance of lhe vinyl group in lhe polymer spectra. The molar weights of lhe polymers were determined by GPC and presented lhe following results: poly (5-0-vinyladipoyl L-arabinose): Mw = 7.2 X 104; PD = 2.48; poly (6-0-vinyladipoyl D-glucose): Mw = 2.7 X 103; PD = 1.75 and poly (1'-O-vinyladipoyl sucrose): Mw = 4.2 X 104; PD = 6.57. The six sugar esters were submitted to superficial tension tests for determination of the critical micelle concentrations (CMC), which varied from 122 to 167 ppm. Finally, a study of applicability of these sugar esters, as lubricants for completion fluids of petroleum wells was' accomplished through comparative analysis of lhe efficiency of these sugar esters, in relation to three commercial lubricants. The products synthesized in this thesis presented equivalent or superior action to lhe tested commercial products

Síntese e caracterização de nanocompósitos magnéticos empregando polimerização radicalar em meios homogêneo (blk) e heterogêneo (miniemulsão)

Tese (doutorado)—Universidade de Brasília, Instituto de Química, Curso de Pós-Graduação em Química, 2016.

Síntese, caracterização e aplicação de nanoadsorventes magnéticos visando à remoção de Cr(VI) de águas residuais

Dissertação (mestrado)—Universidade de Brasília, Faculdade UnB Planaltina, Mestrado em Ciências de Materias, 2016.

Síntese e caracterização do líquido iônico tetrafluoroborato de 1-metil-3-(2,6-(S)-dimetiloct-2-eno)-imidazol como eletrólito para produção de hidrogênio via eletrólise da água

Ionic liquids (ILs) are organic compounds liquid at room temperature, good electrical conductors, with the potential to form as a means for electrolyte on electrolysis of water, in which the electrodes would not be subjected to such extreme conditions demanding chemistry [1]. This paper describes the synthesis, characterization and study of the feasibility of ionic liquid ionic liquid 1-methyl-3(2,6-(S)-dimethyloct-2-ene)-imidazole tetrafluoroborate (MDI-BF4) as electrolyte to produce hydrogen through electrolysis of water. The MDI-BF4 synthesized was characterized by thermal methods of analysis (Thermogravimetric Analysis - TG and Differential Scanning Calorimetry - DSC), mid-infrared spectroscopy with Fourier transform by method of attenuated total reflectance (FTIR-ATR), nuclear magnetic resonance spectroscopy of hydrogen (NMR 1H) and cyclic voltammetry (CV). Where thermal methods were used to calculate the yield of the synthesis of MDI-BF4 which was 88.84%, characterized infrared spectroscopy functional groups of the compound and the binding B-F 1053 cm-1; the NMR 1H analyzed and compared with literature data defines the structure of MDI-BF4 and the current density achieved by MDI-BF4 in the voltammogram shows that the LI can conduct electrical current indicating that the MDI-BF4 is a good electrolyte, and that their behavior does not change with the increasing concentration of water

Multifuncionalização de nanopartículas de CoFe2O4 pela incorporação da prata na sua superfície : síntese e caracterização

Tese (doutorado)—Universidade de Brasília, Instituto de Física, 2015.

Síntese de peptóides lineares e cíclicos via reação multicomponente de Ugi e cicloadição Azido/Alcino catalisada por cobre, realizada sob regime de fluxo contínuo

Tese (doutorado)–Universidade de Brasília, Instituto de Química, Programa de Pós-Graduação em Química, 2015.

Análise comparativa de duas metodologias de ensino na química de oitavo ano: vantagens e desvantagens da metodologia tradicional e da metodologia investigativa

A importância que as actividades experimentais de natureza investigativa assumem na aprendizagem das ciências, no Ensino Básico, depende, sobretudo, da sua consistência com os objectivos da Educação em Ciência e do envolvimento do aluno. O estudo das suas vantagens, relativamente a uma metodologia tradicional, constituiu o objectivo central desta investigação que incidiu no tema Reacções Químicas e envolveu duas turmas de 8° ano. O estudo desenvolveu-se segundo um desenho quasi-experimental, tendo a recolha de dados sido efectuada através de um Inquérito por questionário e de registos de aula efectuados pela professora/investigadora. Os resultados obtidos revelaram, a existência de algumas dificuldades na selecção e síntese da informação e na comunicação de resultados, mas evidenciaram opiniões bastante favoráveis dos alunos do Grupo Experimental. Puseram ainda em evidência o papel determinante da reflexão, antes, durante e após a realização da actividade e indicaram desenvolvimento conceptual e procedimental significativo, relativamente ao tema desenvolvido. ABSTRACT: The importance that experimental activities of investigative nature take in learning Science in the Elementary Schools depends, above all, on its consistency with the goals of Education in Science and the student's involvement. The study of its advantages over a traditional methodology was the main objective of this investigation which focused on the topic Chemical Reactions and involved two classes of the 8th grade. The study was carried out according to a quasi-experimental design and the data collection was conducted through a questionnaire survey and records made by the classroom teacherIresearcher. The results revealed some difficulty in the selection and synthesis of information and communication of results, but showed quite positive opinions of the students in the experimental group. They also put in evidence the role of reflection before, while and after the activity and showed significant procedural and conceptual development in relation to the theme.

Síntese de biguanidas e avaliação da sua atividade biológica em linhas de células tumorais

As biguanidas são um grupo de compostos com diversas atividades biológicas. Recentemente, esta família de compostos tem sido estudada não só pela sua atividade hipoglicemiante, mas também pela sua atividade anti-proliferativa. Um dos objetivos deste estudo foi a síntese de biguanidas, com cadeias laterais com diferentes estruturas e grupos funcionais. O trabalho desenvolvido permitiu a síntese de diversas biguanidas, tendo sido isolados quatro compostos. Outro dos objetivos deste estudo foi avaliar a atividade anti-proliferativa de biguanidas, na linha celular MDST8. Para esse efeito, foi desenvolvido inicialmente um método de quantificação celular com base na atividade ATPásica, testado nas linhas celulares MDST8, MCF7 e BRIN-BD11, tendo sido utilizado como referência a quantificação pelo método das desidrogenases. Os compostos estudados com melhor atividade anti-proliferativa apresentaram IC50 da ordem de 2,5 – 2,9 x10-3 M. Estes valores foram observados em biguanidas cujos grupos substituintes possuíam cadeias hidrocarbonadas cíclicas, alifáticas ou aromáticas p-substituídas, na sua estrutura; Abstract: Synthesis of biguanides and evaluation of their biologic activity in tumor cell lines Biguanides are a group of compounds which have diverse biological activities. Recently, this family of compounds has been studied not only for its hypoglycemic activity, but also for its anti-proliferative activity. One purpose of this study was the synthesis of biguanides, with side chains with different structures and functional groups. The work led to the synthesis of several biguanides, with the isolation of four compounds. Another objective of this study was the evaluation of the anti-proliferative activity of biguanides, in the cell line MDST8. To this aim, it was initially developed a cell quantification method based on the ATPase activity, tested in MDST8, MCF7 and BRIN-BD11 cell lines, with the dehydrogenases method used as reference. The studied compounds with better anti-proliferative activity had IC50 in the range from 2.5 to 2.9 x10-3 M for biguanides whose substituent groups had cyclic hydrocarbon, aliphatic or p-substituted aromatic chains in their structure.

Composición química de la biomasa verde y amonificada con diferentes niveles de urea del pasto Gamba (Andropogon gayanus), cv CIAT-621 en etapa fonológica de pansoneo, Santa Rosa, Sabana Grande, Managua

Se llevó a cabo un estudio con el objetivo de determinar el mejoramiento de la composición química de la biomasa verde y tratada con Urea como proceso de amonificación. El pasto utilizado fue el Gamba (Andropogon gayanus Kunth), cv CIAT- 621 el cual se encontraba en etapa fenológica de pansoneo. El muestreo se realizó durante el mes de noviembre del año 2009 en la Finca Santa Rosa, Universidad Nacional Agraria. Managua, Nicaragua. Los tratamiento consistieron en cuatro niveles de aplicación de Urea; 0, 1, 3 y 5 % en base al forraje verde a tratar, diluido en 0.5 lt de agua, y almacenados en bolsas de polietileno durante 21 días a temperatura ambiente. El diseño utilizado fue un DCA (Diseño completo al Azar) con tres repeticiones. Las variables de estudio para cada tratamiento fueron, porcentajes de; materia seca, proteína cruda, fibra ácido detergente (FAD), fibra neutro detergente (FND), calcio y fósforo. Se realizaron análisis de varianza (ANDEVA) y separaciones de medias, usando Duncan (P<0.05). Para el análisis estadístico las variables codificadas en porcentajes se transformaron, según, 2 arco seno p (Dos veces Arco seno de la raíz cuadrada de la proporción). Se encontró diferencias significativas (P ≤ 0.05) para las variables Proteína Cruda (PC), Fibra Ácido Detergente (FAD), Calcio y Fósforo. La PC varío de 5.24 % a 11.48 % para 0 % y 3 % de Urea respectivamente, mientras la FAD disminuyo de 56.06 % a 43.64 % para los mismos tratamientos. Los minerales evaluados presentaron una tendencia inversa con los tratamientos de Urea, incrementándose el Ca y disminuyendo el Fósforo a medida que aumentaba la dosis de Urea. La Fibra Neutro Detergente aunque no presentó diferencias estadísticas entre los distintos tratamiento fue mejorada (disminución del contenido fibroso) con el tratamiento 3 % de Urea. Se concluye que el tratamiento de 3 % de Urea es el más recomendado para la amonificación de forraje verde en etapa fenologica de pansoneo en Andropogon gayanus Kunth cv CIAT 621. Estos resultados son halagadores ya que con el uso de esta tecnología se evidencia la transformación de materiales maduros de baja o nula calidad en alimentos que provean nutrientes (Proteína – Energía y Minerales) al animal durante la época seca

Composición química de la biomasa verde y amonificada pasto Gamba (Andropogon gayanus, Kunth), cv CIAT-612, en inicio de floración, Santa Rosa, Sabana Grande, Managua, Nicaragua

Se llevó a cabo un estudio con el objetivo de determinar el mejoramiento de la composición química de la biomasa verde y tratada con Urea como proceso de amonificación. El pasto utilizado fue el Gamba (Andropogon gayanus Kunth), cv CIAT-621 el cual se encontraba en etapa fenológica de pansoneo. El muestreo se realizó durante el mes de noviembre del año 2009 en la Finca Santa Rosa, Universidad Nacional Agraria. Managua, Nicaragua. Los tratamiento consistieron en cuatro niveles de aplicación de Urea; 0, 1, 3 y 5 % en base al forraje verde a tratar, diluido en 0.5 lt de agua, y almacenados en bolsas de polietileno durante 21 días a temperatura ambiente. El diseño utilizado fue un DCA (Diseño completo al Azar) con tres repeticiones. Las variables de estudio para cada tratamiento fueron, porcentajes de; materia seca, proteína cruda, fibra ácido detergente (FAD), fibra neutro detergente (FND), calcio y fósforo. Se realizaron análisis de varianza (ANDEVA) y separaciones de medias, usando Duncan (P<0.05). Para el análisis estadístico las variables codificadas en porcentajes se transformaron, según, arco seno 2 p (Arco seno de dos veces la raíz cuadrada de la proporción). Los resultados encontrados demuestran diferencias significativas (P ≤ 0.05) para las variables Proteína Cruda (PC), Fibra Neutro y Ácido Detergente (FND, FAD), Calcio y Fósforo. La PC varío de 2.22 % a 6.07 % para 0 % y 5 % de Urea respectivamente, mientras la FND disminuyó de 78.47 % a 73.16 % para 0 y 3 % respectivamente. La FAD disminuyo de 52.46 % a 47.72 % para 0 y 3 % de inclusión de Urea. Los minerales evaluados presentaron una tendencia inversa con los tratamientos de Urea, Incrementándose el Ca desde el tratamiento testigo(0.65 %) hasta 1.24 % para 0 y 5 % de Urea. El Fósforo disminuyo de 0.21 % para el testigo a 0.14 % para 1 % de Urea.. Se concluye que el tratamiento de 3 % de Urea es el más recomendado para la amonificación de forraje verde en etapa fonológica de inicio de floración del Andropogon gayanus Kunth y que la tecnología de amonificación en verde ejerce un efecto positivo en el mejoramiento de la calidad del forraje.

Producción y composición química de la avispa (Hibiscus rosa-sinensis), a diferentes frecuencias de corte, Rancho Ebenezer, Masaya, Nicaragua

Se llevó a cabo un estudio durante el período lluvioso del año 2005, ‘Rancho Agropecológico’ “EBENEZER” Comarca ‘Hoja Chigüe’ Niquinohomo, Masaya, Nicaragua. El objetivo fue determinar la producción de materia seca y composición química de la biomasa a diferentes frecuencias de corte en Avispa (Hibiscus rosa - sinensis) . Se utilizó un diseño de bloques completos al azar (BCA) con tres repeticiones. Las frecuencias de corte fueron; 30, 45 y 60 días de rebrote. Las variables de estudio fueron longitud de rebrotes (cm), rendimiento de materia seca (kg de MS/ha/corte), porcentajes de materia seca, proteína cruda, fibra cruda, calcio y fósforo. Se realizaron análisis de varianza (ANDEVA) y separaciones de medias, usando Duncan (P<0.05). Las variables codificadas en porcentajes se transformaron, según, dos veces por el arco seno de la raíz cuadrada de la proporción, con el fin de ajustar los datos porcentuales a una distribución normal, Los resultados indican diferencias significativ as entre tratamientos para las variables; longitud de rebrote ( 29.90 y 1 3 .57 cm para frecuencias de 60 y 30 días); rendimiento de materia seca (1, 279.2 y 346.0 kg/ha/corte, para las mismas frecuencias). Se encontraron diferencias significativas para la materia seca (2 6.03, 15.15% para 60 y 30 días), proteína cruda (18.62 y, 23.16% para las mismas frecuencias), y fibra cruda (20.16 VS 15.67 % para 60 y 30 días). En cuanto a minerales, se encontró diferencias estadísticas para el fósforo no así, para el caso del calcio. El estudio permitió demostrar diferencias marcadas en la producción y composición química del forraje de Avispa (Hibiscus rosa-sinensis), observándose que, a diferencias de otros forrajes, los parámetros de calidad no presentan una disminución drástica a medida que se aumenta la edad de rebrote, con las frecuencias estudiadas.