Chemical forms of copper, zinc, lead and cadmium in sediments of the northern part of the Red Sea, Egypt

Total concentrations and chemical forms of heavy metals in sediment samples from the Gulf of Suez and the northern part of the Red Sea, collected during January 2003, were determined by atomic absorption spectrometry. Maximum concentrations of 49.56, 65.42, 33.52 and 3.52 µg/g were recorded for total Cu, Zn, Pb and Cd respectively at Adabiya location. These may reflect the high contribution of land-based activities in the northern part of the Gulf. Also, high percentages of heavy metals were found in the residual fraction (Cu=78.61, Zn=77.10 and Pb=66.80%) while a high percentage of Cd was found in the carbonate fraction (45.82%). However, few or negligible percentages were recorded in the exchangeable fractions (Cu=0.51, Zn=1.57 and Pb=1.74%). Concentration of Cd in the exchangeable fraction was too low to be detected.

Comparative study of seasonal changes in some blood parameters and genetic polymorphisms of serum antibodies and antigens on red blood cells surface in immature Caspian salmon

Seasonal sampling from 40 immature Caspian salmon were performed in summer, autumn, winter and spring. The maximum ranges of RBC counts, Hct, Hb, WBC count and clotting times were observed in spring, summer, spring, spring and winter, respectively. The minimum amounts of these factors were counted in summer, winter, winter, winter and winter, respectively. Blood Samples were taken from healthy smolt, immature and adult Caspian salmon in spawning time. Hematological determinations and biochemical serum analysis were performed in 101 fish in the three samples. The ranges of hematological values for sample mean were counted. Red blood cell counts were 866600 mm3 and 1259400 mm3 in smolt and adult respectively. Hematocrit was 48.39% in smolt and 44.29% in adult. Hemoglobin was 8.85 gr/dl in smolt and 10.91 gr/dl in adult. White blood cell count was 8781.58 mm3 in smolt and 5217.55 mm3 in adult and mean were differential of WBC, Lymphocyte 90.57%in smolt and73.22% in adult. Neutrophil was 5.12% in smolt and 16.92% in adult, Monocyte were 1.27% in smolt and 4.24% in adult, Clotting time was 282.34 Seconds in smolt and 291.47 seconds in adult MCV, MCH and MCHC also meagered in smolt and adult. Biochemical parameter in immature and mature Caspian salmon meagered .Glucose concentration was 2.97 mmol.l- in immature and 1.99 mmol.l- in mature .Cholesterol concentration was 4.26 mmol.l- in immature and 7.06 mmol.l- in mature. Triglyceride amount was 2.35 mmol.l- in immature and 2.47 mmol.l- in mature and Calcium was 2.47 in immature and 2.61 mmol.l- in mature. An in situ study was made on erythrocytic isoantigens and hetero-antigen and their corresponding iso-and hetero-antibodies of sera by means of hemoagglutination tests on the blood sample, of 450 immature and 50 mature Caspian salmon. The absence of erythrocyte iso-antigens and hetero-antigen and their corresponding iso-and hetero-antibodies were shown by the experimental. It could be indicated an intra-specific variation and differences in species for kelardasht hatchery.

Serum-free culture of rhesus monkey embryonic stem cells

Previous studies have shown that the maintenance and proliferation of undifferentiated rhesus monkey embryonic stem (rES) cells requires medium supplemented with fetal bovine serum (FBS). Due to the uncharacterized composition and variation in serum nature, the present study aimed to replace the serum-containing medium with a serum-free medium in the rES cell culture. The results showed that after the initial 48-h culture in the routinely used serum-containing medium, rES cells can grow and proliferate for a prolonged period in the serum-free medium composed of DMEM supplemented with a cocktail of BSA, IGF-1, TGF-alpha, bFGF, aFGF, estradiol, and progesterone. rES cells cultured in the serum-free medium maintained high level of alkaline phosphatase activity and OCT4 level. There was no indication of differentiation as judged by the marker gene expression of all three embryonic germ layers and trophoblast. In addition, serum-free culture would not affect the passage capacity and differentiation potential of rES cells. This work will facilitate the future study of induced differentiation of rES cells and other applications.

Feeder layer- and serum-free culture of rhesus monkey embryonic stem cells

The common culture system of rhesus monkey embryonic stem (rES) cells depends largely on feeder cells and serum, which limits the research and application of rES cells. This study reports a feeder layer-free and serum-free system for culture of rES cells.

Electrical actuation and readout in a nanoelectromechanical resonator based on a laterally suspended zinc oxide nanowire.

In this paper, we present experimental results describing enhanced readout of the vibratory response of a doubly clamped zinc oxide (ZnO) nanowire employing a purely electrical actuation and detection scheme. The measured response suggests that the piezoelectric and semiconducting properties of ZnO effectively enhance the motional current for electromechanical transduction. For a doubly clamped ZnO nanowire resonator with radius ~10 nm and length ~1.91 µm, a resonant frequency around 21.4 MHz is observed with a quality factor (Q) of ~358 in vacuum. A comparison with the Q obtained in air (~242) shows that these nano-scale devices may be operated in fluid as viscous damping is less significant at these length scales. Additionally, the suspended nanowire bridges show field effect transistor (FET) characteristics when the underlying silicon substrate is used as a gate electrode or using a lithographically patterned in-plane gate electrode. Moreover, the Young's modulus of ZnO nanowires is extracted from a static bending test performed on a nanowire cantilever using an AFM and the value is compared to that obtained from resonant frequency measurements of electrically addressed clamped–clamped beam nanowire resonators.

Zinc oxide nanowire based hydrogen sensor on SOI CMOS platform

Here we report on the successful low-temperature growth of zinc oxide nanowires (ZnONWs) on silicon-on-insulator (SOI) CMOS micro-hotplates and their response, at different operating temperatures, to hydrogen in air. The SOI micro-hotplates were fabricated in a commercial CMOS foundry followed by a deep reactive ion etch (DRIE) in a MEMS foundry to form ultra-low power membranes. The micro-hotplates comprise p+ silicon micro-heaters and interdigitated metal electrodes (measuring the change in resistance of the gas sensitive nanomaterial). The ZnONWs were grown as a post-CMOS process onto the hotplates using a CMOS friendly hydrothermal method. The ZnONWs showed a good response to 500 to 5000 ppm of hydrogen in air. We believe that the integration of ZnONWs with a MEMS platform results in a low power, low cost, hydrogen sensor that would be suitable for handheld battery-operated gas sensors. © 2011 Published by Elsevier Ltd.

Local synthesis and alignment of zinc oxide nanowires in aqueous solution using microheaters

A bottom-up technique for synthesizing transversely suspended zinc oxide nanowires (ZnO NWs) under a zinc nitrate (Zn(NO 3) 2· 6H 2O) and hexamethylenetetramine (HMTA, (CH 2) 6·N 4) solution within a microfabricated device is reported in this paper. The device consists of a microheater which is used to initially create an oxidized ZnO seed layer. ZnO NWs are then locally synthesized by the microheater and electrodes embedded within the devices are used to drive electric field directed horizontal alignment of the nanowires within the device. The entire process is carried out at low temperature. This approach has the potential to considerably simplify the fabrication and assembly of ZnO nanowires on CMOS compatible substrates, allowing for the chemical synthesis to be carried out under near-ambient conditions by locally defining the conditions for nanowire growth on a silicon reactor chip. © 2012 IEEE.

Room-temperature remote-plasma sputtering of c-axis oriented zinc oxide thin films

Highly c-axis oriented ZnO films have been deposited at room temperature with high rates (∼50 nm·min -1) using an innovative remote plasma sputtering configuration, which allows independent control of the plasma density and the sputtering ion energy. The ZnO films deposited possess excellent crystallographic orientation, high resistivity (>10 9 Ω·m), and exhibit very low surface roughness. The ability to increase the sputtering ion energy without causing unwanted Ar + bombardment onto the substrate has been shown to be crucial for the growth of films with excellent c-axis orientation without the need of substrate heating. In addition, the elimination of the Ar + bombardment has facilitated the growth of films with very low defect density and hence very low intrinsic stress (100 MPa for 3 μm-thick films). This is over an order of magnitude lower than films grown with a standard magnetron sputtering system. © 2012 American Institute of Physics.

Near-ultraviolet zinc oxide nanowire sensor using low temperature hydrothermal growth.

Two near-ultraviolet (UV) sensors based on solution-grown zinc oxide (ZnO) nanowires (NWs) which are only sensitive to photo-excitation at or below 400 nm wavelength have been fabricated and characterized. Both devices keep all processing steps, including nanowire growth, under 100 °C for compatibility with a wide variety of substrates. The first device type uses a single optical lithography step process to allow simultaneous in situ horizontal NW growth from solution and creation of symmetric ohmic contacts to the nanowires. The second device type uses a two-mask optical lithography process to create asymmetric ohmic and Schottky contacts. For the symmetric ohmic contacts, at a voltage bias of 1 V across the device, we observed a 29-fold increase in current in comparison to dark current when the NWs were photo-excited by a 400 nm light-emitting diode (LED) at 0.15 mW cm(-2) with a relaxation time constant (τ) ranging from 50 to 555 s. For the asymmetric ohmic and Schottky contacts under 400 nm excitation, τ is measured between 0.5 and 1.4 s over varying time internals, which is ~2 orders of magnitude faster than the devices using symmetric ohmic contacts.