In-loop Feature Tracking for Structure and Motion with Out-of-core Optimization

In this paper, a novel and approach for obtaining 3D models from video sequences captured with hand-held cameras is addressed. We define a pipeline that robustly deals with different types of sequences and acquiring devices. Our system follows a divide and conquer approach: after a frame decimation that pre-conditions the input sequence, the video is split into short-length clips. This allows to parallelize the reconstruction step which translates into a reduction in the amount of computational resources required. The short length of the clips allows an intensive search for the best solution at each step of reconstruction which robustifies the system. The process of feature tracking is embedded within the reconstruction loop for each clip as opposed to other approaches. A final registration step, merges all the processed clips to the same coordinate frame

Low-cost retrofitting solutions for RC frames using masonry infill panels

A large number of reinforced concrete (RC) frame structures built in earthquake-prone areas such as Haiti are vulnerable to strong ground motions. Structures in developing countries need low-cost seismic retrofit solutions to reduce their vulnerability. This paper investigates the feasibility of using masonry infill walls to reduce deformations and damage caused by strong ground motions in brittle and weak RC frames designed only for gravity loads. A numerical experiment was conducted in which several idealized prototypes representing RC frame structures of school buildings damaged during the Port-au-Prince earthquake (Haiti, 2010) were strengthened by adding elements representing masonry infill walls arranged in different configurations. Each configuration was characterized by the ratio Rm of the area of walls in the direction of the ground motion (in plan) installed in each story to the total floor area. The numerical representations of these idealized RC frame structures with different values of Rm were (hypothetically) subjected to three major earthquakes with peak ground accelerations of approximately 0.5g. The results of the non-linear dynamic response analyses were summarized in tentative relationships between Rm and four parameters commonly used to characterize the seismic response of structures: interstory drift, Park and Ang indexes of damage, and total amount of energy dissipated by the main frame. It was found that Rm=4% is a reasonable minimum design value for seismic retrofitting purposes in cases in which available resources are not sufficient to afford conventional retrofit measures.

Failure mechanism of reinforced concrete structural walls with and without confinement

This paper presents the results of cyclic loading tests on two large-scale reinforced concrete structural walls that were conducted at Purdue University. One of the walls had confinement reinforcement meeting ACI-318-11 requirements while the other wall did not have any confinement reinforcement. The walls were tested as part of a larger study aimed at indentifying parameters affecting failure modes observed to limit the drift capacity of structural walls in Chile during the Maule Earthquake of 2010. These failure modes include out-of-plane buckling (of the wall rather tan individual reinforcing bars), compression failure, and bond failure. This paper discusses the effects of confinement on failure mode. Distributions of unit strain and curvature obtained with a dense array of non-contact coordinate-tracking targets are also presented.

Programa de historia y elementos de D[e]r[ech]o Civil español común y foral [Manuscrito] : en el curso de 1873 á 1874

El texto comienza a mitad de la lección 7ª

Housing in the Plaza Falla, Cádiz (2007)

In collaboration with Ernesto Fernández-Pujol, Fabián Cruz Gallego and Luis Pizarro.

The meningococcal PilT protein is required for induction of intimate attachment to epithelial cells following pilus-mediated adhesion

The ability of Neisseria meningitidis (MC) to interact with cellular barriers is essential to its pathogenesis. With epithelial cells, this process has been modeled in two steps. The initial stage of localized adherence is mediated by bacterial pili. After this phase, MC disperse and lose piliation, thus leading to a diffuse adherence. At this stage, microvilli have disappeared, and MC interact intimately with cells and are, in places, located on pedestals of actin, thus realizing attaching and effacing (AE) lesions. The bacterial attributes responsible for these latter phenotypes remain unidentified. Considering that bacteria are nonpiliated at this stage, pili cannot be directly responsible for this effect. However, the initial phase of pilus-mediated localized adherence is required for the occurrence of diffuse adherence, loss of microvilli, and intimate attachment, because nonpiliated bacteria are not capable of such a cellular interaction. In this work, we engineered a mutation in the cytoplasmic nucleotide-binding protein PilT and showed that this mutation increased piliation and abolished the dispersal phase of bacterial clumps as well as the loss of piliation. Furthermore, no intimate attachment nor AE lesions were observed. On the other hand, PilT− MC remained adherent as piliated clumps at all times. Taken together these data demonstrate that the induction of diffuse adherence, intimate attachment, and AE lesions after pilus-mediated adhesion requires the cytoplasmic PilT protein.

Correction of diabetic alterations by glucokinase.

Hyperglycemia is a common feature of diabetes mellitus. It results from a decrease in glucose utilization by the liver and peripheral tissues and an increase in hepatic glucose production. Glucose phosphorylation by glucokinase is an initial event in glucose metabolism by the liver. However, glucokinase gene expression is very low in diabetic animals. Transgenic mice expressing the P-enolpyruvate carboxykinase/glucokinase chimeric gene were generated to study whether the return of the expression of glucokinase in the liver of diabetic mice might prevent metabolic alterations. In contrast to nontransgenic mice treated with streptozotocin, mice with the transgene previously treated with streptozotocin showed high levels of both glucokinase mRNA and its enzyme activity in the liver, which were associated with an increase in intracellular levels of glucose 6-phosphate and glycogen. The liver of these mice also showed an increase in pyruvate kinase activity and lactate production. Furthermore, normalization of both the expression of genes involved in gluconeogenesis and ketogenesis in the liver and the production of glucose and ketone body by hepatocytes in primary culture were observed in streptozotocin-treated transgenic mice. Thus, glycolysis was induced while gluconeogenesis and ketogenesis were blocked in the liver of diabetic mice expressing glucokinase. This was associated with normalization of blood glucose, ketone bodies, triglycerides, and free fatty acids even in the absence of insulin. These results suggest that the expression of glucokinase during diabetes might be a new approach to the normalization of hyperglycemia.

Validación y calibración de un sistema hiperespectral

En este estudio se valida y calibra un nuevo sistema hiperespectral formado por una cámara y un espectrógrafo para la medida de propiedades de color y espectrales con elevada resolución espacial. En primer lugar se analiza la respuesta del sistema en términos de repetitividad y reproducibilidad con respecto a un espectrofotómetro convencional. Por otro lado, se proporciona la exactitud del sistema en relación a patrones de longitud de onda y fotométricos. Los resultados obtenidos ponen de manifiesto las ventajas de este tipo de dispositivos para ser utilizados en aplicaciones industriales.

Buscando la correlación instrumental y visual óptima para colores goniocromáticos mediante cabinas de iluminación y multi-gonio-espectrofotómetros

En la búsqueda de la modelización y cuantificación óptimas de la correlación instrumental y visual de materiales goniocromáticos (pinturas y plásticos, principalmente) en los procesos de control de calidad típicos del sector automovilístico, se presenta aquí una comparación de las prestaciones de diversos tipos actuales de instrumentos de medida del color y cabinas de iluminación. Los multi-gonioespectrofotómetros analizados fueron: Datacolor FX10®, X-Rite MA98® y BYK-mac®, y, las cabinas de iluminación direccional: gonio-vision-box® y byko-spectra effect®. Las propiedades ópticas, básicamente fotométricas y colorimétricas, evaluadas fueron: geometrías de medida, fuente de luz, distancia de observación y dirección visual a la muestra. Los resultados aportados mostraron que actualmente dicha correlación instrumental y visual no es óptima debido a desajustes en las cabinas.

Beyond megaprojects?. Water alternatives for mass tourism in coastal Mediterranean Spain

Water availability in adequate quantities and qualities is a fundamental requirement for tourism. In the Mediterranean, one of the world’s leading tourist destinations, water availability is subject to modest and erratic precipitation figures which may decline with climate change. The tourist industry therefore may have to assure future supplies by either recurring to new technologies such as desalination or increasing efficiency in water use. A third and yet little explored alternative would be to seek for complementary of uses with irrigation, the traditional user in many coastal Mediterranean areas and holder of substantial amounts of water. In this paper we present the example of the Consorcio de Aguas de la Marina Baja to show how Benidorm, in Mediterranean Spain and one of the most important tourist centers of the Mediterranean, obtains part of its water through agreements with farmers by which these trade their water with Benidorm and other towns’ treated wastewater of enough quality to be used for irrigation, and obtain several compensations in return. The advantages and disadvantages of the water trade between farmers and tourist interests in the Benidorm area are discussed and we argue that solutions to the pending water crisis of many coastal Mediterranean tourist areas may not need to rely uniquely on expensive technologies to generate new resources but may attempt other alternatives.

Comisión de plan de estudios de la titulación de Ingeniería Técnica de Telecomunicaciones, especialidad en Sonido e Imagen de la EPS

La red docente de la Comisión de plan de estudios de la titulación de Ingeniería Técnica de Telecomunicación, especialidad en Sonido e Imagen de la EPS ha realizado durante el curso 2007/08 un estudio de los objetivos y competencias del futuro título de grado, así como el análisis y diseño de la posible estructura en bloques y asignaturas obligatorias en la que se podría distribuir dicho título. El estudio toma como base los resultados obtenidos en redes de cursos anteriores (ver memoria de redes 2005/06 y 2006/07), las cuales estaban orientadas al diseño curricular dentro del marco de los créditos ECTS para la convergencia al Espacio Europeo de Educación Superior, y sobre todo, se basa en la experiencia de los propios participantes en trabajos o redes previas. El objetivo principal de este proyecto es el diseño curricular del futuro título de grado en Ingeniería de Telecomunicación en Sonido e Imagen, directamente relacionada con la actual Ingeniería Técnica de Telecomunicación, especialidad en Sonido e Imagen, que se imparte en la Universidad de Alicante. Para ello se han seguido las pautas generales establecidas por el Real Decreto de ordenación de Enseñanzas Universitarias Oficiales (BOE, 30 de octubre de 2007), así como otros documentos elaborados por el Colegio Oficial de Ingenieros Técnicos de Telecomunicación y la Comisión de Universidades de Ingeniería Técnica de Telecomunicación.