Information-agnostic coflow scheduling with optimal demotion thresholds

Previous coflow scheduling proposals improve the coflow completion time (CCT) over per-flow scheduling based on prior information of coflows, which makes them hard to apply in practice. State-of-art information-agnostic coflow scheduling solution Aalo adopts Discretized Coflow-aware Least-Attained-Service (D-CLAS) to gradually demote coflows from the highest priority class into several lower priority classes when their sent-bytes-count exceeds several predefined demotion thresholds. However, current design standards of these demotion thresholds are crude because they do not analyze the impacts of different demotion thresholds on the average coflow delay. In this paper, we model the D-CLAS system by an M/G/1 queue and formulate the average coflow delay as a function of the demotion thresholds. In addition, we prove the valley-like shape of the function and design the Down-hill searching (DHS) algorithm. The DHS algorithm locates a set of optimal demotion thresholds which minimizes the average coflow delay in the system. Real-data-center-trace driven simulations indicate that DHS improves average CCT up to 6.20× over Aalo.

Articulations of teaching practice: a case study of teachers and "general capabilities"

The research reported on in this paper is a qualitative case study of secondary school teachers’ interpretations of how they work with a component of the Australian national curriculum, the seven “general capabilities.” The case study of four secondary school teachers utilized teacher interviews eliciting via descriptive analysis how teachers understand and work with the “general capabilities.” The Australian curriculum listing explicit “general capabilities” alongside endorsed disciplines and cross-curriculum priorities requires teachers and their associated classroom practice(s) bond to practical dexterities. Policy expectations are such that the knowledge, skills, behaviors and dispositions of the “general capabilities,” along with curriculum content and cross-curriculum priority areas will support students to successfully live and work in the twenty-first century. While policy expectations appear well defined, including expectations that teachers navigate and implement relevant curriculum in creative ways, the study underpinning this paper finds that teachers assert their professional and pedagogic authority over the curriculum by enacting and translating it for the benefit of their students.

Determining conservation priority areas for Palearctic passerine migrant birds in sub-Saharan Africa

Migratory bird species breeding in the Palearctic and overwintering in sub-Saharan Africa face multiple conservation challenges. As a result, many of these species have declined in recent decades, some dramatically. We therefore used the best available database for the distribution of 68 passerine migrants in sub-Saharan Africa to determine priority regions for their conservation. After modeling each species’ distribution using BIOMOD software, we entered the resulting species distributions at a 1° × 1° grid resolution into MARXAN software. We then used several different selection procedures that varied the boundary length modifier, species penalty factor, and the inclusion of grid cells with high human footprint and with protected areas. While results differed between selection procedures, four main regions were regularly selected: (1) one centered on southern Mali; (2) one including Eritrea, central Sudan, and northern Ethiopia; (3) one encompassing southwestern Kenya and much of Tanzania and Uganda; and (4) one including much of Zimbabwe and southwestern Zambia. We recommend that these four regions become priority regions for research and conservation efforts for the bird species considered in this study.

Skill development for innovative procurement environments in construction

The construction industry should be a priority to all governments because it impacts economically and socially on all citizens. Sector turnover in industrialised economies typically averages 8-12% of GDP. Further, construction is critical to economic growth. Recent Australian studies estimate that a 10% gain in efficiency in construction translates to a 2.5% increase in GDP Inefficiencies in the Australian construction industry have been identified by a number of recent studies modelling the building process. They have identified potential savings in time of between 25% and 40% by reducing non-value added steps in the process. A culture of reform is now emerging in the industry – one in which alternate forms of project delivery are being trialed. Government and industry have identified Alliance Contracting as a means to increase efficiency in the construction industry as part of a new innovative procurement environment. Alliance contracting requires parties to form relationships and work cooperatively to provide a more complete service. This is a significant cultural change for the construction industry, with its well-known adversarial record in traditional contracting. Alliance contracts offer enormous potential benefits, but the Australian construction industry needs to develop new skills to effectively participate in the new relationship environment. This paper describes a collaborative project identifying skill needs for clients and construction professionals to more effectively participate in an increasingly sophisticated international procurement environment. The aim of identifying these skill needs is to assist industry, government, and skill developers to prepare the Australian construction workforce for the future. The collaborating Australian team has been fortunate to secure the Australian National Museum in Canberra as its live case study. The Acton Peninsula Development is the first major building development in the world awarded on the basis of a joint alliance contract.

Can IT Security be improved with better IT Leadership in the 21st Century University?

Organizations generally are not responding effectively to rising IT security threats because people issues receive inadequate attention. The stark example of IT security is just the latest strategic IT priority demonstrating deficient IT leadership attention to the social dimension of IT. Universities in particular, with their devolved people organization, diverse adoption of IT, and split central/local federated approach to governance and leadership of IT, demand higher levels of interpersonal sophistication and strategic engagement from their IT leaders. An idealized model for IT leaders for the 21st century university is proposed to be developed as a framework for further investigation. The testing of this model in an action research study is proposed.

Towards a Business Process Management Maturity Model

Business Process Management (BPM) has been identified as the number one business priority by a recent Gartner study (Gartner, 2005). However, BPM has a plethora of facets as its origins are in Business Process Reengineering, Process Innovation, Process Modelling, and Workflow Management to name a few. Organisations increasingly recognize the requirement for an increased process orientation and require appropriate comprehensive frameworks, which help to scope and evaluate their BPM initiative. This research project aims toward the development of a holistic and widely accepted BPM maturity model, which facilitates the assessment of BPM capabilities. This paper provides an overview about the current model with a focus on the actual model development utilizing a series of Delphi studies. The development process includes separate studies that focus on further defining and expanding the six core factors within the model, i.e. strategic alignment, governance, method, Information Technology, people and culture.

Hiring Graduates: Perspectives from Advertising and Public Relations Employers

This paper looks at employer expectations of advertising and public relations graduates seeking an entry level position. For employers in both disciplines, the top three priorities are the same generic skills – communications skills, personality traits and strategic or analytical thinking. However, some significant differences were observed, with PR practitioners assigning more importance to practical aspects such as experience in the field and internships. Public relations employers also tend to think that advertising graduates require less strategic skills than public relations graduates. Advertising practitioners generally considered the skills of entry level recruits to be more consistent across the two disciplines.

Developing a supportive culture for teaching and learning : a university, faculty and school perspective

In the early 1990's the University of Salford was typical of most pre-1992 Universities in that whilst students provided much of it's income, little attention was paid to pedagogy. As Warren Piper (1994) observed, University teachers were professional in their subject areas but generally did not seek to acquire a pedagogy of HE. This was the case in Alsford. Courses were efficiently run but only a minority of staff were engaged in actively considering learning and teaching issues. Instead staff time was spent on research and commercial activity.----- In the mid-1990's the teaching environment began to change significantly. As well as Dearing, the advent of QAA and teaching quality reviews, Salford was already experiencing changes in the characteristics of its student body. Wideing access was on our agenda before it was so predominant nationally. With increasing numbers and heterogeneity of students as well as these external factors, new challenges were facing the University and teaching domain.----- This paper describes how a culture which values teaching, learning and pedagogic inquiry is being created in the university. It then focuses on parts of this process specific to the Faculty of Business and Informatics, namely the Faculty's Learning and Teaching Research Network and the establishment of the Centre for Construction Education in the School of Construction and Property Management.----- The Faculty of Business and Informatics' Learning and Teaching Research Network aims to raise the profile, quality and volume of pedagogic research across the five schools in the faculty. The initiative is targeted at all academics regardless of previous research experience. We hope to grow and nurture research potential where it exists and to acknowledge and use the existing expertise of subject-based researchers in collaborative ventures. We work on the principle that people are deliged to share what they know but need appreciation and feedback for doing so. A further ain is to surface and celebrate the significant amount of tacit knowledge in the area of pedagogy evidenced by the strength of student and employer feedback in many areas of the faculty's teaching.----- The Faculty embraces generic and core management expertise but also includes applied management disciplines in information systems and construction and property management where internationally leading research activities and networked centres of excellence have been established. Drawing from this experience, and within the context of the Faculty network, a Centre for Construction Education is being established with key international external partners to develop a sustainable business model of an enterprising pedagogic centre that can undertake useful research to underpin teaching in the Faculty whilst offering sustainable business services to allow it to benefit from pump-priming grant funding.----- Internal and external networking are important elements in our plans and ongoing work. Key to this are our links with the LTSN subject centres (BEST and CEBE) and the LTSN generic centre. The paper discusses networking as a concept and gives examples of practices which have proved useful in this context.----- The academic influences on our approach are also examined. Dixon’s (2000) work examining how a range of companies succeed through internal knowledge sharing has provided a range of transferable practices. We also examine the notion of dialogue in this context, defined by Ballantyne (1999) as ‘The interactive human process of reasoning together which comes into being through interactions based on spontaneity or need and is enabled by trust’ Social constructionist principles of Practical Authorship (Shotter, 1993, Pavlica, Holman and Thorpe, 1998)) have also proved useful in developing our perspective on learning and knowledge creation within our community of practice.

Injury prevention in Queensland : report to Queensland Injury Prevention Council

Injury is the fourth leading cause of death in Australia. Injury rates in Queensland are amongst the highest in Australia and 21.5% of people surveyed for this research reported that their lifestyle or that of an immediate family member had been permanently affected by injury. Injury results in over 40,000 hospital admissions and 200,000 attendances at hospital Emergency Departments in Queensland each year. Queensland's death rate from injuries is higher than the national average, with consistently higher rates of deaths related to transport injuries. Queensland statistics also show higher than national average rates of injuries due to falls, homicide and accidental drowning. (Pike, Muller, Baade & Ward, 2000) In 2000-01 injuries represented over $4 billion (or 8%) of total health system expenditure, and 185,000 disability-adjusted life years (DALYs), or 7% of the total morbidity burden of disease and injury in Australia in 2003. (Begg, Vos, Barker, Stevenson, Stanley & Lopez, 2007). Injury is one of seven key health areas identified by the Commonwealth, state and territory governments for priority attention as National Health Priority Areas

Tensions, transisitions and triumphs : examining the transitional experience of fashion students between school and university

Joining any new community involves transition and adaptation. Just as we learn to adapt to different cultures when we choose to live abroad, so students learn the language and culture of an academic community in order to succeed within that environment. At the same time however, students bring with them individual learning styles and expectations, influenced by their prior experiences of learning and of life more generally. Some have excelled at school; others have come to fashion seeking something in which to excel for the first time. Commencing a degree in fashion design brings students into contact with peers and lecturers who share their passion, providing them with a community of practice which can be both supportive and at the same time intimidating.----- In Queensland where university level study in fashion is such a new phenomenon, few applicants have any depth of training in design when they apply to study fashion. Unlike disciplines such as Dance or Visual Art, where lecturers can expect a good level of skill upon entry to a degree program, we have to look for the potential evidenced in an applicant’s portfolio, much of which is untutored work that they have generated themselves in preparation for application. This means that many first year fashion students at QUT whilst very passionate about the idea of fashion design are often very naïve about the practice of fashion design, with limited knowledge of the history or cultural context of fashion and few of the technical skills needed to translate their ideas into three dimensional products.----- For teachers engaging with first year students in the design studios, it is critical to be cognizant of this mix of different experiences, expectations and emotions in order to design curricula and assessment that stretch and engage students without unduly increasing their sense of frustration and anxiety. This paper examines a first year project designed to provide an introduction to design process and to learning within a creative discipline. The lessons learnt provide a valuable and transferable resource for lecturers in a variety of art and design disciplines.

Work integrated learning for design : a scholarship of integration

Within an action research framework, this paper describes the conceptual basis for developing a crossdisciplinary pedagogical model of higher education/industry engagement for the built environment design disciplines including architecture, interior design, industrial design and landscape architecture. Aiming to holistically acknowledge and capitalize on the work environment as a place of authentic learning, problems arising in practice are understood as the impetus, focus and ‘space’ for a process of inquiry and discovery that, in the spirit of Boyer’s ‘Scholarship of Integration’, provides for generic as well as discipline-specific learning.

The influence of role models on students' entrepreneurial intentions

The Smart State initiative requires both improved education and training, panicularly in technical fields, plus entrepreneurship to commercialise new ideas. In this study, we propose an entrepreneurial intentions model as a guide to examine the educational choices and entrepreneurial intentions of first-year University students, focusing on the effect of role models. A survey of over 1000 first-year University students revealed that the most enterprising students were choosing to study in the disciplines of information technology and business, economics and law, or selecting dualdegree programs that include business. The role models most often identified for their choice of field of study were parents,followed by teachers and peers, with females identifying more role models than males. For entrepreneurship, students' role models were parents andpeers,followed by famous persons and teachers. Males and females identified similar numbers of role models, but males found starting a business more desirable and more feasible, and reponed higher entrepreneurial intention. The implications of these findings for Smart State policy are discussed.

Advertising education in Australia: Looking back to the future

In Australia, advertising is a $13 billion industry which needs a supply of suitably skilled employees. Over the years, advertising education has developed from vocational based courses to degree courses across the country. This paper uses diffusion theory and various secondary sources and interviews to observe the development of advertising education in Australia from its early past, to its current day tertiary offerings, to discussing the issues that are arising in the near future. Six critical issues are identified, along with observations about the challenges and opportunities within Australia advertising education. By looking back to the future, it is hoped that this historical review provides lessons for other countries of similar educational structure or background, or even other marketing communication disciplines on a similar evolutionary path.