920 resultados para Platina, 1421-1481.
Resumo:
Neste trabalho foi estudada a síntese química do poli (5-amino 1-naftol) (PAN) em presença de diferentes agentes dopantes e meios reacionais. Os polímeros obtidos foram caracterizados pelas técnicas espectroscópicas de infravermelho, Raman, por microscopia eletrônica de varredura, por voltametria cíclica, temogravimetria, medidas de condutividade elétrica e grau de aderência. A estrutura do PAN obtido apresentou-se semelhante aos resultados obtidos para a PAni. Filmes de PAN sintetizados em meio aquoso ácido sobre substratos de platina apresentaram eletroatividade e estabilidade à ciclagem quando. Filmes preparados a partir de PAN sintetizado em presença dos ácidos dopantes dinonil naftalêno disulfônico (DNNDSA), dinonil naftalêno sulfônico (DNNSA) e dodecil benzeno sulfônico (DBSA), apresentaram-se mais homogêneos e mais aderentes que os sintetizados em ausência desses. A aplicação na construção de dispositivos eletrocrômicos e de chaveamento apresentou-se inicialmente viável para todas as amostras testadas.
Resumo:
O transporte de massa por migração relativo à redução do proton em um ultramicroeletrodo de platina foi investigado. O efeito da migração sobre as correntes limite foi primeiramente estudado para uma só espécie eletroativa em solução através da comparação dos voltampérogramas obtidos na ausência de eletrólito suporte assim como na presença de um grande excesso do mesmo (efeito do eletrólito). O comportamento do proton na água e dos ácidos do tipo BH+ e HA- em acetonitrila foi estudado e uma expressão para quantificar o efeito do eletrólito é proposta. Ela considera as condutâncias equivalentes e as cargas das espécies iônicas em solução, o número de elétrons envolvido na reação eletroquímica e o tipo de eletrodo utilisado. Os fenômenos de exaltação da corrente de migração que podem se manifestar quando a redução de uma espécie eletroativa é precedida pela redução de uma segunda espécie presente simultâneamente na solução foram igualmente estudados. Observa-se que a exaltação da corrente de migração de uma espécie iônica ocorre mesmo quando sua transformação eletroquímica precede aquela da espécie molecular. Nêste caso, se as mobilidades iônicas são próximas, a altura da onda da espécie molecular é duas vezes maior que na ausência da espécie iônica.
Resumo:
Com o aumento do número de gestores especializados em um número cada vez maior de possibilidades de investimentos na indústria de fundos brasileira, os fundos Multigestor se tornaram uma alternativa para os investidores que procuram diversificar seus investimentos e delegam às instituições financeiras o trabalho de alocar os recursos dentro das diferentes estratégias e fundos existentes no mercado. O intuito deste estudo é avaliar a capacidade de gerar retornos anormais (alfa) dos fundos de fundos da indústria brasileira, classificados como Fundos Multimercados Multigestor. Para isso foi estudada uma amostra com 1.421 fundos Multigestor com tributação de Longo Prazo no período de janeiro de 2005 a dezembro de 2011. A análise dos resultados encontrados através de regressões de modelos de vários fatores, derivados do modelo de Jensen (1968), sugere que apenas 3,03% dos fundos estudados conseguem adicionar valor a seus cotistas. Foram estudadas ainda as três principais fontes potenciais de geração de alfa dos fundos de fundos, a escolha das estratégias que compõe a carteira do fundo (alocação estratégica), a antecipação de movimentos de mercado (market timing) e a capacidade selecionar os melhores fundos dentro de cada estratégia (seleção de fundos). A partir da inclusão de termos quadráticos, conforme proposto pelos modelos de Treynor e Mazuy (1966) pode-se verificar que os fundos Multigestor, em média, não conseguem adicionar valor tentando antecipar movimentos de mercado (market timing). Através da construção de uma variável explicativa com a composição estratégica de cada fundo da amostra em cada período de tempo, pode-se verificar que os gestores de fundos de fundos, em média, também fracassam ao tentar selecionar os melhores fundos/gestores da indústria. Já a escolha das estratégias que compõe a carteira do fundo (alocação estratégica) mostrou contribuir positivamente para o retorno dos fundos. Ainda foi avaliada a capacidade de gerar alfa antes dos custos, o que elevou o percentual de fundos com alfa positivo para 6,39% dos fundos estudados, mas foi incapaz de alterar o sinal do alfa médio, que permaneceu negativo.
Resumo:
Descreve o microscópio óptico, suas principais partes e funções. Ressalta a importância desta ferramenta para o microbiologista. Todas as partes do microscópio e suas respectivas funções são detalhadas: base, platina, corpo ou braço, Charriot, fonte de luz, filtro, diafragma, condensador, parafuso do condensador, lentes objetivas, revólver, lentes oculares, parafuso macrométrico e parafuso micrométrico. A aula enfatiza os tipos de lentes objetivas e suas aplicações, demonstra como calcular a ampliação total da amostra e como realizar o ajuste de foco.
Resumo:
O vídeo apresenta a relação entre a área de Interação Humano-Computador e fatores humanos, como características físicas, cognitivas e emocionais. O vídeo apresenta o Modelo de Processamento de Informação Humano (MPIH) e alguns exemplos do funcionamento do corpo humano em relação às soluções computacionais.
Resumo:
Aim of this paper is show the viscosity measure of a sodium bentonite-water-lactose mixture and your rheological behaviour. This analysis showed the formation of tridimensional structure type and formation of stratified silicate/lactose, this occurred due to different concentrations of organic products into mixture and due to a difference of rotation during viscosity measument. Formation of networks is a consequence of the attraction between the silicate layers in water-lactose mixture. In the present work aqueous solutions of lactose with concentration of 7%, 5%, 3%, 1% and 0% (wt %) were used.
Resumo:
There is little information on the nutrition of red-winged tinamous (Rhynchotus rufescens) reared in captivity, and their nutritional requirements still need to be determined. This study aimed at determining dietary crude protein requirements and testing four organic selenium supplementation levels in the diet of red-winged tinamous during the breeding season. Birds were housed in a conventional broiler house divided in 16 boxes with one male and three females each. Iso-energy (2800kcal ME/kg) pelleted feeds, based on corn and soybean meal, were supplied in tube feeders. In the first experiment, treatments consisted of four different diets containing different crude protein (CP) contents (15, 18, 21, or 24%) and in the second experiment, the four diets contained equal protein level (22.5%) and four different organic selenium levels (0, 0.2, 0.4, or 0.8ppm). Data were analyzed by the least square method. The best egg weight and eggshell thickness were obtained with 22.5% dietary CP. Organic selenium did not influence the studied reproductive traits of red-winged tinamous (Rhynchotus rufescens) males or females.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
In this paper, we proposed a flexible cure rate survival model by assuming the number of competing causes of the event of interest following the Conway-Maxwell distribution and the time for the event to follow the generalized gamma distribution. This distribution can be used to model survival data when the hazard rate function is increasing, decreasing, bathtub and unimodal-shaped including some distributions commonly used in lifetime analysis as particular cases. Some appropriate matrices are derived in order to evaluate local influence on the estimates of the parameters by considering different perturbations, and some global influence measurements are also investigated. Finally, data set from the medical area is analysed.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Wood gasification technologies to convert the biomass into fuel gas stand out. on the other hand, producing electrical energy from stationary engine is widely spread, and its application in rural communities where the electrical network doesn't exist is very required. The recovery of exhaust gases (engine) is a possibility that makes the system attractive when compared with the same components used to obtain individual heat such as electric power. This paper presents an energetic alternative to adapt a fixed bed gasifier with a compact cogeneration system in order to cover electrical and thermal demands in a rural area and showing an energy solution for small social communities using renewable fuels. Therefore, an energetic and economical analysis from a cogeneration system producing electric energy, hot and cold water, using wooden gas as fuel from a small-sized gasifier was calculated. The energy balance that includes the energy efficiency (electric generation as well as hot and cold water system; performance coefficient and the heat exchanger, among other items), was calculated. Considering the annual interest rates and the amortization periods, the costs of production of electrical energy, hot and cold water were calculated, taking into account the investment, the operation and the maintenance cost of the equipments. Crown Copyright (C) 2010 Published by Elsevier Ltd. All rights reserved.
Resumo:
In this work, the objective in study was the development of a biossensor potencyometric for urea detection, starting from the extracted urease of soy grains. Initially, was made a chemometrics study, through a planning factorial 24, objectified to find great conditions for the extraction of the urease without its properties were affected. Starting from this study, the best conditions were determined for the obtaining of rich extracts in urease, allowing the biossensors making with good characteristics. These were made using a platinum electrode as transducer with the dispersed urease in chitosan head office and reticulated in glutaraldehyde vapor. The biossensors obtained presented a limit of urea detection the same to 0,33 mM and lineal strip between 0,33 and 3 mM of the substratum. The time of answer was considered loud, mainly, in low concentrations of the substratum, where it was taken about 5 minutes by analysis. For high concentrations that time was reduced for not more than one minute. The time of life was limited by the adherence of the enzymatic membrane to the transducer, but it was possible to maintain the biossensor with operation for one month with about 50 accomplished measures. Application of the biossensor for analyses of fertilizers to the urea base presented excellent result for a sample with few interfering, but it was different when the used fertilizer was originating from of a complex sample. Even so the label was not expressed the text of nitrogen it was totally coming of the urea. An evaluation of the kinetic parameters of the catalytic reaction of the biossensor showed coherence with the results exposed in the literature
Resumo:
In this work, chitosan was used as a coating of pure perlite in order to increase the accessibility of the groups OH- e NH2+the adsorptionof ions Mn2+ e Zn2+.The characterization results of the expanded perlite classified as microporous and whose surface area 3,176 m2 g-1after the change resulted in 4,664 m2g-1.From the thermogravimetry(TG) it was found that the percentage of coating was34,3%.The infrared analysis can prove the presence of groups Si-OH, Si-O e Al-O-Siresulting from the perlite and C=O, NH2and OH characterization of chitosan. The experiments on experiments on the adsorption of Mn and Zn were performed in the concentration range of10 a 50 mgL-1and the adsorption capacity inpH 5,8 e 5,2 was 19,49 and 23,09 mgg-1to 25 oC,respectively.The adsorption data were best fitted to Langmuir adsorption model to Langmuir adsorption model for both metalionsisindicative of monolayer adsorption. The kinetics of adsorption were calculated from the equation of Lagergren fitting the model pseudo-second-order for all initial concentrations, suggesting that adsorption of ions Mn2+ and Zn2+ follows the kinetics of pseudo-second-order and whose constant Speedk2(g/mg.min) are 0,105 e 3,98 and capacity and maximum removal qe 4,326 e 3,348,respectively.In this study we used a square wave voltammetry cathodic stripping voltammetry to quantify the adsorbed ions, and the working electrode glassy carbon, reference electrode silver / silver chloride and a platinum auxiliary electrode. The attainment of the peaks corresponding to ions Mn2+ and Zn2+ was evaluated in and electrochemical cell with a capacity of 30 mL using a buffer system (Na2HPO4/NaH2PO4)at pH 4 and was adjusted with solutionsH3PO4 0,1molL-1and NaOH 0,1 molL-1and addition of the analyte has been a cathodic peak in- 0,873 Vand detection limit of2,55x10-6molL-1para Zn.The dough used for obtaining the adsorption isotherm was 150 mg and reached in 120 min time of equilibrium for both metal ions.The maximum adsorption for 120 min with Mn concentration 20 mgL-1 and Zn 10 mgL-1,was91, 09 e 94, 34%, respectively
Resumo:
In this paper, the technique of differential pulse voltammetry (DPV) has been studied for monitoring the concentration of oxalic acid (OA) during their electrochemical oxidation (EO) in acidic medium using platinum anode supported on titanium (Ti / Pt). The DPV was standardized and optimized using a glassy carbon electrode modified with cysteine. The modification with cysteine was developed electrochemically, forming a polymeric film on the surface of the glassy carbon electrode. The formation of the polymer film was confirmed by analysis of scanning electron microscope and atomic force microscope, confirming the modification of the electrode. The electrochemical degradation was developed using different current densities 10, 20 30 and 40 mA cm -2 electrode with Ti / Pt observing the degradation of oxalic acid, and monitored using the method of KMnO4 titration. However, the analyzes with DPV showed the same behavior elimination of oxalic acid titration. Compared with the titration method classical observed and DPV could be a good fit, confidence limits of detection and confirming the applicability of the technique electroanalytical for monitoring the degradation of oxalic acid
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)