Esecuzione immediata di frammenti di codice sorgente C# tramite l’utilizzo della .NET Compiler Platform

.NET Compiler Platform è un compilatore per i linguaggi C# e Visual Basic realizzato da Microsoft. L’innovazione apportata da tale strumento è l’introduzione di API che permettono di accedere al compilatore; in particolare, è possibile accedere alle strutture dati utilizzate al suo interno, quali simboli o AST, e controllare e/o modificare il processo di compilazione. Una parte di questo progetto, chiamato anche progetto Roslyn, è focalizzata sull’introduzione dello scripting per il linguaggio C#. In questa trattazione si è interessati a sperimentare le possibilità offerte da tale strumento nel campo dell’esecuzione dinamica di frammenti di codice. Gli obiettivi imposti si collocano nell’ambito della re-ingegnerizzazione e dello sviluppo di software. Tali obiettivi sono la re-implementazione dei filtri di selezione contenuti nel framework Phoenix, utilizzando le API di Roslyn per migliorarne le prestazioni, e la progettazione di un componente che realizzi una console per lo scripting C# dotata della possibilità di riferire dinamicamente librerie. Le API di compilazione si rivelano essere non propriamente adatte all’esecuzione immediata di frammenti di codice, nonostante ciò, è possibile, appoggiandosi alla reflection, utilizzarle per giungere a questo risultato. Lo scripting, invece, si rivela uno strumento dalle grandi potenzialità nel suddetto ambito.

Sviluppo di applicazioni mobili attraverso framework cross-platform: una valutazione sperimentale

Sviluppare e manutenere applicativi destinati a differenti piattaforme è un’opzione esclusiva di quelle entità capaci di sostenere costi molto alti per la realizzazione di queste applicazioni. Questo esclude gli sviluppatori indipendenti, che spesso realizzano prodotti in totale autonomia; le start-up, che hanno l’esigenza di sviluppare un’idea di business avendo a disposizione budget estremamente ridotti; le piccole aziende, alle quali viene così preclusa la possibilità di competere con player più importanti. Questo tipo di emergenze rende lo sviluppo cross-platform una soluzione interessante per la realizzazione delle applicazioni mobili, abbattendo i costi di sviluppo e permettendo di raggiungere più velocemente un pubblico più ampio. C'è quindi sempre maggiore interesse, da parte degli sviluppatori, per gli strumenti di sviluppo cross-platform. Per catturare l’attenzione degli sviluppatori è necessario che lo strumento sia dotato di buona stabilità, che offra un ambiente di sviluppo confortevole, una buona user experience, facilità di aggiornamento, tempi di sviluppo contenuti e possibilità di immissione delle applicazioni su diversi ecosistemi software. L’idea alla base di questa Tesi di laurea è valutare i pro e i contro di uno di questi framework cross-platform e compararlo con le tecnologie native. Il framework scelto è Ionic per via della sua popolarità tra gli sviluppatori e della ridotta bibliografia scientifica a riguardo. Molte ricerche scientifiche valutano le prestazioni di uno o più framework cross-platform rispetto ad una soluzione nativa, tuttavia è raro un confronto tra un framework e più soluzioni native. Per questo, oltre a valutare i pro e i contro del framework, verrà anche effettuata una comparazione tra gli applicativi nativi per Android e iOS e le controparti sviluppate attraverso Ionic, permettendo di identificare eventuali differenze di performance e aiutare gli sviluppatori nelle scelte tecnologiche.

A comparison of the conformability of everolimus-eluting bioresorbable vascular scaffolds to metal platform coronary stents

The aim of this study was to assess the differences in terms of curvature and angulation of the treated vessel after the deployment of either a metallic stent or a polymeric scaffold device.

Effect of platform switching on peri-implant bone levels: a randomized clinical trial

The concept of platform switching has been introduced to implant dentistry based on observations of reduced peri-implant bone loss. However, randomized clinical trials are still lacking. This study aimed to test the hypothesis that platform switching has a positive impact on crestal bone-level changes.

Open or submerged healing of implants with platform switching: a randomized, controlled clinical trial

The temporal pattern of bone-level alterations in conventionally restored implants is dependent upon healing mode (open or submerged). This study examined the influence of healing on marginal bone levels at implants with a medium-rough surface including the implant collar and a clearance-fit implant-abutment connection restored according to a platform-switching concept.

Angiographic geometric changes of the lumen arterial wall after bioresorbable vascular scaffolds and metallic platform stents at 1-year follow-up

The aim of this study was to compare the angiographic changes in coronary geometry of the bioresorbable vascular scaffolds (BVS) and metallic platform stent (MPS) between baseline and follow-up.

Design and Development of an FPGA-based Distributed Computing Processing Platform

This thesis presents two frameworks- a software framework and a hardware core manager framework- which, together, can be used to develop a processing platform using a distributed system of field-programmable gate array (FPGA) boards. The software framework providesusers with the ability to easily develop applications that exploit the processing power of FPGAs while the hardware core manager framework gives users the ability to configure and interact with multiple FPGA boards and/or hardware cores. This thesis describes the design and development of these frameworks and analyzes the performance of a system that was constructed using the frameworks. The performance analysis included measuring the effect of incorporating additional hardware components into the system and comparing the system to a software-only implementation. This work draws conclusions based on the provided results of the performance analysis and offers suggestions for future work.

Analysis of cytokines in the peritoneal fluid of endometriosis patients as a function of the menstrual cycle stage using the Bio-Plex® platform

Endometriosis is a painful disease affecting 10-15% of reproductive-age women. Concentrations of several cytokines and angiogenic factors in peritoneal fluid (PF) have been found to correlate with the severity of the disease. However, levels of some analytes vary across the menstrual cycle, and an ideal biomarker of endometriosis has not yet been identified. We have compared the PF concentrations of different cytokines in proliferative and secretory phases in women with and without the disease using the Bio-Plex platform.

Exogenous gonadotropins have little impact on follicular but considerable effect on serum cytokine concentrations – a comparison between Natural Cycle and stimulated IVF using a multiplexed assay platform

Introduction: Throughout follicular growth and subsequent corpus luteum formation the leukocyte number increases and follicular vascularisation changes. These processes are enhanced under exogenous stimulation with gonadotropins. Cytokines released by leukocytes contribute to further recruitment and vascularisation of the follicle, and they play an important role in regulating ovarian steroidogenesis by influencing theca and granulosa–lutein cell function. Changes in cytokine and vascular endothelial growth factor (VEGF) concentrations in the ovary as a consequence of gonadotropin stimulation may negatively influence oocyte quality. In this project we have compared the intrafollicular production of inflammatory cytokines and growth factors between natural IVF cycles (NC) and classical, gonadotropin-stimulated IVF cycles (gsIVF). Material and Methods: Serum on the day of oocyte retrieval and follicular fluid (FF) were collected in 37 NC and 39 gsIVF cycles. Thirteen women within this population underwent one NC and one gsIVF cycle each. A total of 14 cytokines from Bio-Plex panels I and II were determined in matched serum and FF samples using Luminex xMAP technology on the Bio-Plex(R) platform, using the serum protocol. Results: Tumour necrosis factor-alpha, RANTES, eotaxin and interferon-gamma-induced protein-10 levels were lower in FF than in serum, and thus not further investigated. Interleukin (IL)-6, -8, -10, -15, -18, monocyte chemotactic protein-1 (MCP-1), VEGF and leukaemia inhibitory factor (LIF) showed higher median concentrations in FF than in serum, indicating possible ovarian production. Moreover, most of these showed higher evels in the gsIVF than in the NC groups in the serum, but not in the follicular fluid. IL-8 was reduced in gsIVF cycles. Conclusion: The fact that serum but not FF levels of the studied cytokines were higher in the stimulated than in the natural cycles can be attributed to the increased number of active follicles present after controlled ovarian stimulation.

Hip2Norm: an object-oriented cross-platform program for 3D analysis of hip joint morphology using 2D pelvic radiographs

We developed an object-oriented cross-platform program to perform three-dimensional (3D) analysis of hip joint morphology using two-dimensional (2D) anteroposterior (AP) pelvic radiographs. Landmarks extracted from 2D AP pelvic radiographs and optionally an additional lateral pelvic X-ray were combined with a cone beam projection model to reconstruct 3D hip joints. Since individual pelvic orientation can vary considerably, a method for standardizing pelvic orientation was implemented to determine the absolute tilt/rotation. The evaluation of anatomically morphologic differences was achieved by reconstructing the projected acetabular rim and the measured hip parameters as if obtained in a standardized neutral orientation. The program had been successfully used to interactively objectify acetabular version in hips with femoro-acetabular impingement or developmental dysplasia. Hip(2)Norm is written in object-oriented programming language C++ using cross-platform software Qt (TrollTech, Oslo, Norway) for graphical user interface (GUI) and is transportable to any platform.

Development of a high performance parallel computing platform and its use in the study of nanostructures : clusters, sheets and tubes .

Small clusters of gallium oxide, technologically important high temperature ceramic, together with interaction of nucleic acid bases with graphene and small-diameter carbon nanotube are focus of first principles calculations in this work. A high performance parallel computing platform is also developed to perform these calculations at Michigan Tech. First principles calculations are based on density functional theory employing either local density or gradient-corrected approximation together with plane wave and gaussian basis sets. The bulk Ga2O3 is known to be a very good candidate for fabricating electronic devices that operate at high temperatures. To explore the properties of Ga2O3 at nonoscale, we have performed a systematic theoretical study on the small polyatomic gallium oxide clusters. The calculated results find that all lowest energy isomers of GamOn clusters are dominated by the Ga-O bonds over the metal-metal or the oxygen-oxygen bonds. Analysis of atomic charges suggest the clusters to be highly ionic similar to the case of bulk Ga2O3. In the study of sequential oxidation of these slusters starting from Ga2O, it is found that the most stable isomers display up to four different backbones of constituent atoms. Furthermore, the predicted configuration of the ground state of Ga2O is recently confirmed by the experimental result of Neumark's group. Guided by the results of calculations the study of gallium oxide clusters, performance related challenge of computational simulations, of producing high performance computers/platforms, has been addressed. Several engineering aspects were thoroughly studied during the design, development and implementation of the high performance parallel computing platform, rama, at Michigan Tech. In an attempt to stay true to the principles of Beowulf revolutioni, the rama cluster was extensively customized to make it easy to understand, and use - for administrators as well as end-users. Following the results of benchmark calculations and to keep up with the complexity of systems under study, rama has been expanded to a total of sixty four processors. Interest in the non-covalent intereaction of DNA with carbon nanotubes has steadily increased during past several years. This hybrid system, at the junction of the biological regime and the nanomaterials world, possesses features which make it very attractive for a wide range of applicatioins. Using the in-house computational power available, we have studied details of the interaction between nucleic acid bases with graphene sheet as well as high-curvature small-diameter carbon nanotube. The calculated trend in the binding energies strongly suggests that the polarizability of the base molecules determines the interaction strength of the nucleic acid bases with graphene. When comparing the results obtained here for physisorption on the small diameter nanotube considered with those from the study on graphene, it is observed that the interaction strength of nucleic acid bases is smaller for the tube. Thus, these results show that the effect of introducing curvature is to reduce the binding energy. The binding energies for the two extreme cases of negligible curvature (i.e. flat graphene sheet) and of very high curvature (i.e. small diameter nanotube) may be considered as upper and lower bounds. This finding represents an important step towards a better understanding of experimentally observed sequence-dependent interaction of DNA with Carbon nanotubes.

Development of a wireless platform to generate nitric oxide for implanted biomedical devices

The perturbation of homeostatic mechanisms caused by interactions between any indwelling biomedical device and the biological medium into which it is implanted initiates a dynamic wound healing response from the host which can be rigorous and ongoing. The typical result of this response is a severe degradation in the performance and safety of the device, often to the extent of precluding their clinical use. Nitric oxide (NO) is an endogenously produced biomolecule capable of mediating many of the cellular processes leveraged against implanted devices. The in vivo performance of indwelling devices prepared with NO release coatings has recently been evaluated with very encouraging results. This work developed a platform capable of both generating programmable fluxes of NO and directly evaluating the performance of indwelling probes under different profiles of NO generation. This platform can be used to improve the efficacy of NO release materials in mitigating the host response.