La longevidad del pino canario: los pinos de Pilancones y la Lajilla.

Se presentan los resultados obtenidos en el análisis de diversas secciones de Pinus canariensis procedentes de árboles longevos con los siguientes objetivos: - Evaluar la variabilidad de los anillos de crecimiento - Estimar con precisión la edad - Establecer etapas de crecimiento características que puedan relacionarse con diferentes variables ambientales

Current Mode with RMS Voltage and Offset Control Loops for a Single-Phase Aircraft Inverter Suitable for Parallel and 3-Phase Operation Modes

Rms voltage regulation may be an attractive possibility for controlling power inverters. Combined with a Hall Effect sensor for current control, it keeps its parallel operation capability while increasing its noise immunity, which may lead to a reduction of the Total Harmonic Distortion (THD). Besides, as voltage regulation is designed in DC, a simple PI regulator can provide accurate voltage tracking. Nevertheless, this approach does not lack drawbacks. Its narrow voltage bandwidth makes transients last longer and it increases the voltage THD when feeding non-linear loads, such as rectifying stages. On the other hand, the implementation can fall into offset voltage error. Furthermore, the information of the output voltage phase is hidden for the control as well, making the synchronization of a 3-phase setup not trivial. This paper explains the concept, design and implementation of the whole control scheme, in an on board inverter able to run in parallel and within a 3-phase setup. Special attention is paid to solve the problems foreseen at implementation level: a third analog loop accounts for the offset level is added and a digital algorithm guarantees 3-phase voltage synchronization.

Design of envelope amplifier based on interleaved multiphase buck converter with minimum time control for RF application

In this paper, an interleaved multiphase buck converter with minimum time control strategy for envelope amplifiers in high efficiency RF power amplifiers is proposed. The solution for the envelope amplifier is to combine the proposed converter with a linear regulator in series. High efficiency of envelope amplifier can be obtained through modulating the supply voltage of the linear regulator. Instead of tracking the envelope, the buck converter has discrete output voltage that corresponding to particular duty cycles which achieve total ripple cancellation. The transient model for minimum time control is explained, and the calculation of transient times that are pre-calculated and inserted into a lookup table is presented. The filter design trade-off that limits capability of envelope modulation is also discussed. The experimental results verify the fast voltage transient obtained with a 4-phase buck prototype.

Digital Control Implementation to Reduce the Cost and Improve the Performance of the Control Stage of an Industrial Switched-Mode Power Supply

The main objective of this work is the design and implementation of the digital control stage of a 280W AC/DC industrial power supply in a single low-cost microcontroller to replace the analog control stage. The switch-mode power supply (SMPS) consists of a PFC boost converter with fixed frequency operation and a variable frequency LLC series resonant DC/DC converter. Input voltage range is 85VRMS-550VRMS and the output voltage range is 24V-28V. A digital controller is especially suitable for this kind of SMPS to implement its multiple functionalities and to keep the efficiency and the performance high over the wide range of input voltages. Additional advantages of the digital control are reliability and size. The optimized design and implementation of the digital control stage it is presented. Experimental results show the stable operation of the controlled system and an estimation of the cost reduction achieved with the digital control stage.

New Considerations in the Input Filter Design of a Three-Phase Buck-Type PWM Rectifier for Aircraft Applications

An EMI filter for a three-phase buck-type medium power pulse-width modulation rectifier is designed. This filter considers differential mode noise and complies with MIL-STD-461E for the frequency range of 10kHz to 10MHz. In industrial applications, the frequency range of the standard starts at 150kHz and the designer typically uses a switching frequency of 28kHz because the fifth harmonic is out of the range. This approach is not valid for aircraft applications. In order to design the switching frequency in aircraft applications, the power losses in the semiconductors and the weight of the reactive components should be considered. The proposed design is based on a harmonic analysis of the rectifier input current and an analytical study of the input filter. The classical industrial design does not consider the inductive effect in the filter design because the grid frequency is 50/60Hz. However, in the aircraft applications, the grid frequency is 400Hz and the inductance cannot be neglected. The proposed design considers the inductance and the capacitance effect of the filter in order to obtain unitary power factor at full power. In the optimization process, several filters are designed for different switching frequencies of the converter. In addition, designs from single to five stages are considered. The power losses of the converter plus the EMI filter are estimated at these switching frequencies. Considering overall losses and minimal filter volume, the optimal switching frequency is selected.

Optimum Design of an Envelope Tracking Buck Converter for RF PA using GaN HEMTs

In this paper, filter design methodology and application of GaN HEMTs for high efficiency Envelope Amplifier in RF transmitters are proposed. The main objectives of the filter design are generation of the envelope reference with the minimum possible distortion and high efficiency of the amplifier obtained by the optimum trade-off between conduction and switching losses. This optimum point was determined using power losses model for synchronous buck with sinusoidal output voltage and experimental results showed good correspondence with the model and verified the proposed methodology. On the other hand, comparing to Si MOSFETs, GaN HEMTs can provide higher efficiency of the envelope amplifier, due to superior conductivity and switching characteristics. Experimental results verified benefits of GaN devices comparing to the appliance of Si switching devices with very good Figure Of Merit, for this particular application

Serial or Parallel Linear-Assisted Switching Converter as Envelope Amplifier: Optimization and Comparison

This paper presents a theoretical analysis and an optimization method for envelope amplifier. Highly efficient envelope amplifiers based on a switching converter in parallel or series with a linear regulator have been analyzed and optimized. The results of the optimization process have been shown and these two architectures are compared regarding their complexity and efficiency. The optimization method that is proposed is based on the previous knowledge about the transmitted signal type (OFDM, WCDMA...) and it can be applied to any signal type as long as the envelope probability distribution is known. Finally, it is shown that the analyzed architectures have an inherent efficiency limit.

Single-Stage Grid-Connected Forward Microinverter with Boundary Mode Control

This paper presents a microinverter to be integrated into a solar module. The proposed solution combines a forward converter and a constant off-time boundary mode control, providing MPPT capability and unity power factor in a single-stage converter. The transformer structure of the power stage remains as in the classical DC-DC forward converter. Transformer primary windings are utilized for power transfer or demagnetization depending on the grid semi-cycle. Furthermore, bidirectional switches are used on the secondary side allowing direct connection of the inverter to the grid. Design considerations for the proposed solution are provided, regarding the inductance value, transformer turns ratio and frequency variation during a line semi-cycle. The decoupling of the twice the line frequency power pulsation is also discussed, as well as the maximum power point tracking (MPPT) capability. Simulation and experimental results for a 100W prototype are enclosed

Teaching digital control of switch mode power supplier

This paper explains the methodology followed to teach the subject `Digital control of power converters'. This subject belongs to the research master on `Industrial Electronics' of the Universidad Politécnica de Madrid. The subject is composed of several theoretical lessons plus the development of an actual digital control. For that purpose an ad hoc dc-dc converter has been designed and built. The use of this board together with some software tools seems a very powerful way for the students to learn the concepts from the design to the real world

Investigaciones dendrogeomorfológicas aplicadas al estudio de la peligrosidad por avenidas e inundaciones en el parque nacional de la Caldera de Taburiente (La Palma, Islas Canarias)

La red de drenaje del parque nacional de la Caldera de Taburiente (La Palma, Islas Canarias) está constituida por numerosos torrentes tributarios del barranco de Las Angustias, que presentan frecuentes e intensos eventos de avenidas súbitas. Estas riadas han producido incluso víctimas mortales entre practicantes de senderismo (3 fallecidos en noviembre de 2001) e importantes pérdidas económicas al interferir con los proyectos de repoblación de las riberas con especies autóctonas (superiores a los 700.000 euros en los últimos dos años); aparte de daños puntuales a instalaciones del parque y las sendas más transitadas. Ante la imposibilidad de realizar análisis de peligrosidad con métodos hidrológicohidráulicos convencionales por no existir estaciones de aforo representativas ni datos pluviométricos con series largas y discriminación temporal adecuada, se ha recurrido a los métodos dendrogeomorfológicos. Para ello, en dos campañas de campo se han caracterizado geomorfológica y florísticamente varios tramos de los barrancos principales, y se ha muestreado y analizado cerca de 60 ejemplares de pino canario (Pinus canariensis Chr. Sm. ex DC.) ubicados en las proximidades de los cauces. A partir del análisis de la secuencia de anillos y de las heridas de los descortezados producidos por la carga sólida transportada durante las riadas, se ha podido reconstruir el registro reciente (últimos 150 años) de eventos de avenidas súbitas que han sufrido estos barrancos. En paralelo se ha realizado una topografía de detalle de los tramos de barranco que, junto con las alturas de los descortezados, permite tener una primera aproximación hidráulica a la magnitud de dichos eventos (caudales, velocidades, energías?). Con toda esta información se pretende realizar un estudio integral de peligrosidad y riesgo, de utilidad para los gestores del parque nacional. Los estudios son financiados por el proyecto de investigación IDEA-GesPPNN (www.idea-gesppnn.es), del Organismo Autónomo de Parques Nacionales (MAGRAMA)

3D video quality of experience - influence of scale and crosstalk

This paper gives an overview of three recent studies by the authors on the topic of 3D video Quality of Experience (QoE). Two of studies [1,2] investigated different psychological dimension that may be needed for describing 3D video QoE and the third the visibility and annoyance of crosstalk[3]. The results shows that the video quality scale could be sufficient for evaluating S3D video experience for coding and spatial resolution reduction distortions. It was also confirmed that with a more complex mixture of degradations more than one scale should be used to capture the QoE in these cases. The study found a linear relationship between the perceived crosstalk and the amount of crosstalk.

Holocene fossil woods from the Caldera de Taburiente National Park (Canary Islands, Spain)

The study of 39 Pinus canariensis Holocene fossil woods from the Caldera de Taburiente is presented

Determinación de la higroscopicidad y comportamiento termodinámico de la madera juvenil y madura a través de sus isotermas de sorción

La respuesta higroscópica de la madera varía a lo largo de la dirección radial del árbol. El aumento de corta de ejemplares jóvenes y el uso de troncos de pequeños diámetros en la industria de los productos forestales, hacen preciso estudiar el comportamiento higroscópico tanto de la madera juvenil como de la madura. Su determinación proporciona información para comprender los mecanismos de sorción. Asimismo, la obtención de las propiedades termodinámicas de ambos tipos de madera facilita la modelización de procesos industriales como el secado o el encolado. En el presente trabajo, se ha comparado el comportamiento higroscópico y las propiedades termodinámicas de la madera juvenil y madura de Abies pinsapo Boissier, Abies alba Mill., Pinus canariensis C. Sm. ex DC., Pinus nigra Arnold, Pinus uncinata Mill. ex Mirb. y Pinus pinea L. Para este propósito se han utilizado las isotermas de sorción obtenidas mediante el método tradicional de sales saturadas descrito por COST Action E8 a 15, 35 y 50ºC en Abies pinsapo, Abies alba, Pinus nigra, Pinus uncinata y Pinus pinea, y a 35 y 50ºC en Pinus canariensis. Igualmente, se ha empleado el equipo dynamic vapor sorption (DVS) en la obtención de las isotermas de Pinus pinea a 35 y 50ºC. El ajuste de las curvas se ha realizado mediante el modelo Guggenheim, Anderson y de Boer-Dent (GAB), cumpliendo todas las muestras los criterios de aceptación establecidos. En el estudio de las isotermas se ha calculado el coeficiente y área de histéresis entre el proceso de adsorción y desorción para cada una de las muestras. Con el fin de comprender el comportamiento higroscópico experimentado por cada madera se ha determinado la composición química, espectros de infrarrojos (FTIR) y difractogramas de rayos X de cada una. Los parámetros termodinámicos - calor isostérico neto y total heat of wetting - se han obtenido a partir de las isotermas de sorción mediante el método de integración de la ecuación de Clausius-Clapeyron. Finalmente, se han comparado los datos obtenidos con el método tradicional de sales saturadas y con dynamic vapor sorption con el propósito de conocer la existencia de similitudes entre ambas metodologías. Los resultados mostraron que los puntos de equilibrio son, en la mayor parte de los casos, superiores en la madera madura frente a la juvenil, y por tanto las isotermas de la madera madura se encuentran siempre por encima de las de la juvenil, debido principalmente a la composición química. Respecto a las propiedades termodinámicas, se ha determinado que la energía involucrada en los procesos de sorción es superior en la madera madura que en la madera juvenil, siendo mayor en el proceso de desorción frente al de adsorción. En la comparación de las metodologías de sales saturadas y dynamic vapor sorption no se han detectado casi diferencias significativas en el proceso de adsorción, mientras que sí se han obtenido en el de desorción. ABSTRACT The hygroscopic response of wood varies throughout the radial direction of the tree. The longer cut of young trees and the use of small-diameter trunks in the forest product industry make it necessary to study the hygroscopic behaviour of both juvenile and mature wood. Determining this behaviour in both types of wood provides information for understanding the sorption mechanisms. Similarly, obtaining the thermodynamic properties of juvenile and mature wood facilitates modelling of industrial processes such as drying and bonding. In this study a comparison was made of the hygroscopic behaviour and thermodynamic properties of juvenile and mature wood of Abies pinsapo Boissier, Abies alba Mill., Pinus canariensis C. Sm. ex DC., Pinus nigra Arnold, Pinus uncinata Mill. ex Mirb. and Pinus pinea L. This was done by obtaining the sorption isotherms using the traditional saturated salt method described by COST Action E8 at 15, 35 and 50ºC in Abies pinsapo, Abies alba, Pinus nigra, Pinus uncinata and Pinus pinea, and at 35 and 50ºC in Pinus canariensis. In addition, dynamic vapour sorption (DVS) was used to obtain the isotherms of Pinus pinea at 35 and 50ºC. The curves were fitted using the Guggenheim, Anderson and de Boer- Dent (GAB) model and all samples met the established acceptance criteria. In the study of the isotherms, the hysteresis coefficient and area of the hysteresis loop between adsorption and desorption were calculated for each sample. To understand the hygroscopic behaviour of juvenile and mature wood, the chemical composition, infrared spectra (FTIR) and X-ray diffractograms of each type of wood were determined. The thermodynamic parameters - net isosteric heat and total heat of wetting - were obtained from the sorption isotherms by applying the integration method of the Clausius-Clapeyron equation. The data obtained using the traditional saturated salt method and with dynamic vapour sorption were compared to determine the similarities between the two methods. The results showed that the equilibrium points are greater in the mature wood than in the juvenile wood in most cases, and therefore the mature wood isotherms are always above the juvenile wood isotherms, mainly because of the chemical composition. As regards the thermodynamic properties, it was determined that the energy involved in the sorption processes is greater in the mature wood than in the juvenile wood, and is greater in the desorption process than in the adsorption process. On comparing the saturated salt and dynamic vapour sorption methods, almost no significant differences were detected in the adsorption process, but significant differences were obtained in the desorption process.