Acquired myasthenia gravis associated with a non-invasive thymic carcinoma in a dog

An 8 1/2-year-old neutered male Beagle was diagnosed with acquired myasthenia gravis associated with a non-invasive thymic carcinoma. The thymic mass was surgically excised and the dog was treated with pyridostigmine, prednisolone and azathioprine. Serial acetylcholine receptor antibody titres were increased initially but slowly declined to normal values over a period of 24 weeks. Improved exercise tolerance was seen following therapy, however, oesophageal dysfunction persisted. The dog was euthanased 26 weeks after initial presentation due to a complicating illness. A necropsy showed no regrowth or metastasis of the thymic carcinoma.

Geometric nonlinear analysis of thin plates by a refined nonlinear non-conforming triangular plate element

Based on the refined non-conforming element method for geometric nonlinear analysis, a refined nonlinear non-conforming triangular plate element is constructed using the Total Lagrangian (T.L.) and the Updated Lagrangian (U.L.) approach. The refined nonlinear non-conforming triangular plate element is based on the Allman's triangular plane element with drilling degrees of freedom [1] and the refined non-conforming triangular plate element RT9 [2]. The element is used to analyze the geometric nonlinear behavior of plates and the numerical examples show that the refined non-conforming triangular plate element by the T.L. and U.L. approach can give satisfactory results. The computed results obtained from the T.L. and U.L. approach for the same numerical examples are somewhat different and the reasons for the difference of the computed results are given in detail in this paper. © 2003 Elsevier Science Ltd. All rights reserved.

High rate of detection of primary aldosteronism, including surgically treatable forms, after 'non-selective' screening of hypertensive patients

Background Wide testing of the aldosterone: renin ratio among hypertensive individuals has revealed primary aldosteronism to be common, with most patients normokalaemic. Some investigators, however, have reported aldosterone-producing adenoma to be rare among patients so detected. Objective To test the hypothesis that differences among reported studies in the rate of detection of aldosterone-producing adenoma (as opposed to bilateral adrenal hyperplasia) reflect differences in the procedures used for diagnosis of primary aldosteronism, and the methods used to identify aldosterone-producing adenomas. Methods In the newly established Princess Alexandra Hospital Hypertension Unit (PAHHU), we used procedures developed by Greenslopes Hospital Hypertension Unit (which reports that more than 30% of patients with primary aldosteronism have aldosterone-producing adenomas) to diagnose primary aldosteronism and determine the subtype. All patients with an increased aldosterone: renin ratio (measured after correction for hypokalaemia and while the patient was not receiving interfering medications) underwent fludrocortisone suppression testing to confirm or exclude primary aldosteronism; if they were positive, they underwent genetic testing to exclude glucocorticoid-remediable aldosteronism before adrenal venous sampling was used to differentiate lateralizing from bilateral primary aldosteronism. Results This approach allowed PAHHU to diagnose, within 2 years, 54 patients [only seven (13%) hypokalaemic] with primary aldosteronism. All tested negative for glucocorticoid-remediable aldosteronism. Aldosterone production was lateralized to one adrenal in 15 patients (31%; only six hypokalaemic) and was bilateral in 34 (69%; all normokalaemic) of 49 patients who underwent adrenal venous sampling. Among patients with lateralizing adrenal hyperplasia, computed tomography revealed an ipsilateral mass in only six and a contralateral lesion in one. Fourteen patients underwent unilateral adrenalectomy, which cured the hypertension in seven and improved it in the remainder. In patients with bilateral primary aldlosteronism, hypertension responded to spironolactone (112.5-50 mg/ day) or amiloride (2.5-10 mg/day). Conclusion When performed with careful regard to confounding factors, measurement of the aldosterone: renin ratio in all hypertensive individuals, followed by fludrocortisone suppression testing to confirm or exclude primary aldosteronism and adrenal venous sampling to determine the subtype, can result in the detection of significant numbers of patients with specifically treatable or potentially curable hypertension. (C) 2003 Lippincott Williams Wilkins.

Time will tell: Ambiguous non-responses on internet relay chat

The design of Internet Relay Chat (IRC) affords for, and itself produces, non-response situations that are not possible in FTF or telephone interaction. These system-occasioned nonresponses produce almost isomorphic stimuli to participant non-responses. Situations thus arise in which non-responses are interpersonally accountable despite agentive ambiguity. This study explores four intersections of participant-action and system-occasioned non-responses. An extension to Pomerantz's (1984b) 'pursuing a response' problems/solutions is proposed. The impact of IRC's design on its popularity is discussed in contrast to more recent chat systems. Suggestions are made for active and passive presence and non-response accounting features in future chat systems.

The use of 16s rDNA restriction fragment length polymorphism analysis for the identification of non-fermenting gram negative bacilli in a cystic fibrosis microbiology referral service

The utility of 16s rDNA restriction fragment length polymorphism (RFLP) analysis for the partial genomovar differentiation of Burkholderia cepacia complex bacterium is well documented. We compared the 16s rDNA RFLP signatures for a number of non-fermenting gram negative bacilli (NF GNB) LMG control strains and clinical isolates pertaining to the genera Burkholderia, Pseudomonas, Achromobacter (Alcaligenes), Ralstonia, Stenotrophomonas and Pandoraea. A collection of 24 control strain (LMG) and 25 clinical isolates were included in the study. Using conventional PCR, a 1.2 kbp 16s rDNA fragment was generated for each organism. Following restriction digestion and electrophoresis, each clinical isolate RFLP signature was compared to those of the control strain panel. Nineteen different RFLP signatures were detected from the 28 control strains included in the study. TwentyoneyTwenty- five of the clinical isolates could be classified by RFLP analysis into a single genus and species when compared to the patterns produced by the control strain panel. Four clinical B. pseudomallei isolates produced RFLP signatures which were indistinguishable from B. cepacia genomovars I, III and VIII. The identity of these four isolates were confirmed using B. pseudomallei specific PCR. 16s rDNA RFLP analysis can be a useful identification strategy when applied to NF GNB, particularly for those which exhibit colistin sulfate resistance. The use of this molecular based methodology has proved very useful in the setting of a CF referral laboratory particularly when utilised in conjunction with B. cepacia complex and genomovar specific PCR techniques. Species specific PCR or sequence analysis should be considered for selected isolates; especially where discrepancies between epidemiology, phenotypic and genotypic characteristics occur.

Structural refinement of systems specified in object-z and CSP

This paper is concerned with methods for refinement of specifications written using a combination of Object-Z and CSP. Such a combination has proved to be a suitable vehicle for specifying complex systems which involve state and behaviour, and several proposals exist for integrating these two languages. The basis of the integration in this paper is a semantics of Object-Z classes identical to CSP processes. This allows classes specified in Object-Z to be combined using CSP operators. It has been shown that this semantic model allows state-based refinement relations to be used on the Object-Z components in an integrated Object-Z/CSP specification. However, the current refinement methodology does not allow the structure of a specification to be changed in a refinement, whereas a full methodology would, for example, allow concurrency to be introduced during the development life-cycle. In this paper, we tackle these concerns and discuss refinements of specifications written using Object-Z and CSP where we change the structure of the specification when performing the refinement. In particular, we develop a set of structural simulation rules which allow single components to be refined to more complex specifications involving CSP operators. The soundness of these rules is verified against the common semantic model and they are illustrated via a number of examples.

Adsorption of supercritical fluids in non-porous and porous carbons: analysis of adsorbed phase volume and density

In this paper, we revisit the surface mass excess in adsorption studies and investigate the role of the volume of the adsorbed phase and its density in the analysis of supercritical gas adsorption in non-porous as well as microporous solids. For many supercritical fluids tested (krypton, argon, nitrogen, methane) on many different carbonaceous solids, it is found that the volume of the adsorbed phase is confined mostly to a geometrical volume having a thickness of up to a few molecular diameters. At high pressure the adsorbed phase density is also found to be very close to but never equal or greater than the liquid phase density. (C) 2003 Elsevier Science Ltd. All rights reserved.

Non-volant tetrapods from Reserva Biológica de Duas Bocas, State of Espírito Santo, Southeastern Brazil

A Reserva Biológica de Duas Bocas (2.190 ha) é um dos maiores remanescentes de Mata Atlântica do Estado do Espírito Santo, Sudeste do Brasil. Nós amostramos tetrápodes não voadores nessa área entre maio de 2007 e abril de 2008, utilizando armadilhas de queda, armadilhas de isca, armadilhas fotográficas e buscas oportunísticas diurnas e noturnas. Além disso, nós compilamos registros de vertebrados não voadores ocorrentes nesta área disponíveis na literatura e através de espécimes em museus. Nós documentamos 52 espécies de anfíbios, 24 espécies de répteis não voadores e 39 espécies de mamíferos não voadores. Do total de 115 espécies, 47 configuram novos registros para a área e seis outras espécies tiveram sua distribuição geográfica ampliada com os resultados do presente estudo. Além disso, apresentamos o registro de predação da perereca Hypsiboas faber pela serpente Chironius bicarinatus. Cinco das espécies registradas são listadas como ameaçadas no Estado do Espírito Santo e muitas outras possuem estado de conservação incerto. A Reserva Biológica de Duas Bocas é um importante refúgio de vida selvagem, principalmente quando consideramos a expansão de áreas urbanas no seu entorno.

Feeding non-preference by Spodoptera frugiperda and Spodoptera eridania on tomato genotypes

Larvae of the genus Spodoptera spp. are highly polyphagous and can cause economical losses in several agricultural crops. Given their growing importance in the tomato crop, especially for industry, this work aimed to evaluate the feeding non-preference by larvae of Spodoptera frugiperda (J. E. Smith, 1797) and Spodoptera eridania (Cramer, 1782) on tomato genotypes and classify them by the levels of resistance. The commercial cultivar Santa Clara was set as the susceptible standard and line PI 134417 as the resistant standard to evaluate the lines PI 134418, PI 126931, LA 462 and LA 716. Feeding non-preference tests were performed under non-choice and free-choice conditions to evaluate the genotype attractiveness to larvae at predetermined times after their release, as well as the leaf area consumed. Overall, the genotypes LA 716 and PI 126931 were the least attractive to S. frugiperda, whereas Santa Clara was the most attractive and consumed. For S. eridania, the genotypes PI 126931, LA 462, LA 716 and PI 134418 were the least preferred for feeding, and Santa Clara and PI 134417 were the most attractive and consumed. The genotypes LA 716 and PI 126931 are moderately resistant to S. frugiperda and S. eridania; PI 134418 and LA 462 are moderately resistant to S. eridania; PI 134417 is susceptible to S. frugiperda and S. eridania; and Santa Clara is highly susceptible to both S. frugiperda and S. eridania.

Portugal’s Minho-Lima region as a tourist destination: tourism operators’ attitudes towards its management and promotion

The success of tourism development depends on the capacity of a region’s tourism agents to establish and sustain networks, involving both private-sector companies and the public sector. Creating an attractive destination able to compete with others that are better positioned and consolidated requires cooperative behaviour among the various agents involved. This behaviour will facilitate both external and internal competition, which in turn will assure better product quality, continuous product renewal, a strong offer of unique experiences and the efficient use of endogenous resources. In this paper, the authors discuss the results of a survey of restaurant owners and of interviews conducted with the main institutional agents concerned with tourism promotion and the economic development of the Minho–Lima region. Such an approach, the authors argue, can be valuable in identifying the strengths and weaknesses of the area in question with regard to future tourism development. The authors work from the premise that the commitment of tourism agents constitutes a precondition for the success of the strategy to be defined. This is especially applicable to Minho–Lima, which to date has suffered from an absence of commitment and coordination on the part of those agents.

Eigenvalue computations in the context of data-sparse approximations of integral operators

In this work, we consider the numerical solution of a large eigenvalue problem resulting from a finite rank discretization of an integral operator. We are interested in computing a few eigenpairs, with an iterative method, so a matrix representation that allows for fast matrix-vector products is required. Hierarchical matrices are appropriate for this setting, and also provide cheap LU decompositions required in the spectral transformation technique. We illustrate the use of freely available software tools to address the problem, in particular SLEPc for the eigensolvers and HLib for the construction of H-matrices. The numerical tests are performed using an astrophysics application. Results show the benefits of the data-sparse representation compared to standard storage schemes, in terms of computational cost as well as memory requirements.

Application of Gage R&R methodology for improving the training and evaluation of automatic optical inspection machine operators

The current level of demand by customers in the electronics industry requires the production of parts with an extremely high level of reliability and quality to ensure complete confidence on the end customer. Automatic Optical Inspection (AOI) machines have an important role in the monitoring and detection of errors during the manufacturing process for printed circuit boards. These machines present images of products with probable assembly mistakes to an operator and him decide whether the product has a real defect or if in turn this was an automated false detection. Operator training is an important aspect for obtaining a lower rate of evaluation failure by the operator and consequently a lower rate of actual defects that slip through to the following processes. The Gage R&R methodology for attributes is part of a Six Sigma strategy to examine the repeatability and reproducibility of an evaluation system, thus giving important feedback on the suitability of each operator in classifying defects. This methodology was already applied in several industry sectors and services at different processes, with excellent results in the evaluation of subjective parameters. An application for training operators of AOI machines was developed, in order to be able to check their fitness and improve future evaluation performance. This application will provide a better understanding of the specific training needs for each operator, and also to accompany the evolution of the training program for new components which in turn present additional new difficulties for the operator evaluation. The use of this application will contribute to reduce the number of defects misclassified by the operators that are passed on to the following steps in the productive process. This defect reduction will also contribute to the continuous improvement of the operator evaluation performance, which is seen as a quality management goal.