Modificação superficial de filmes de poliéster usando plasma a baixa temperatura

A polyester film has a vast application field, due some properties that are inherent of this kind of material such as, good mechanical resistance, chemical resistance to acids and bases and low production cost. However, this material has some limitations as low superficial tension, flat surface, low affinity to dyers, and poor adhesion which impede the use of the same ones for some finality as good wettability. Among the existent techniques to increase the superficial tension, plasma as energy source is the more promising technique, because of their versatility and for not polluting the environment. The plasma surface polymeric modification has been used for many researchers, because it does not affect the environment with toxic agents, the alterations remains only at nanometric layers and this technique shows expressive results. Then, due to its good acceptance, polyester films were treated with oxygen plasma varying the treatment time from 10 to 60 min with an increase of 10 min to each subsequent treatment. Also, the samples were treated with a gas mixture (nitrogen + oxygen) varying the percentage of each gas the mixture from 0 to 100%, the treatment time remaining constant to all treatments (10 min). After plasma treatment the samples were characterized by contact angle, surface tension, Raman spectroscopy, Infrared attenuated total reflection (IR-ATR) and atomic force microscopy, with the aim to study the wettability increase of treated polyester films as its variables. In the (O2/N2) plasma treatment of polyester films can be observed an increase of superficial roughness superior to those treated by O2 plasma. By the other hand, the chemical modification through the implantation of polar groups at the surface is obtained more easily using O2 plasma treatment

Estudo de reatores eletroquímicos para remoção de Cu2+ , Zn2+, Fenol e BTEX em água produzida

The production of water has become one of the most important wastes in the petroleum industry, specifically in the up stream segment. The treatment of this kind of effluents is complex and normally requires high costs. In this context, the electrochemical treatment emerges as an alternative methodology for treating the wastewaters. It employs electrochemical reactions to increase the capability and efficiency of the traditional chemical treatments for associated produced water. The use of electrochemical reactors can be effective with small changes in traditional treatments, generally not representing a significant additional surface area for new equipments (due to the high cost of square meter on offshore platforms) and also it can use almost the same equipments, in continuous or batch flow, without others high costs investments. Electrochemical treatment causes low environmental impact, because the process uses electrons as reagent and generates small amount of wastes. In this work, it was studied two types of electrochemical reactors: eletroflocculation and eletroflotation, with the aim of removing of Cu2+, Zn2+, phenol and BTEX mixture of produced water. In eletroflocculation, an electrical potential was applied to an aqueous solution containing NaCl. For this, it was used iron electrodes, which promote the dissolution of metal ions, generating Fe2+ and gases which, in appropriate pH, promote also clotting-flocculation reactions, removing Cu2+ and Zn2+. In eletroflotation, a carbon steel cathode and a DSA type anode (Ti/TiO2-RuO2-SnO2) were used in a NaCl solution. It was applied an electrical current, producing strong oxidant agents as Cl2 and HOCl, increasing the degradation rate of BTEX and phenol. Under different flow rates, the Zn2+ was removed by electrodeposition or by ZnOH formation, due the increasing of pH during the reaction. To better understand the electrochemical process, a statistical protocol factor (22) with central point was conducted to analyze the sensitivity of operating parameters on removing Zn2+ by eletroflotation, confirming that the current density affected the process negatively and the flow rate positively. For economical viability of these two electrochemical treatments, the energy consumption was calculated, taking in account the kWh given by ANEEL. The treatment cost obtained were quite attractive in comparison with the current treatments used in Rio Grande do Norte state. In addition, it could still be reduced for the case of using other alternative energy source such as solar, wind or gas generated directly from the Petrochemical Plant or offshore platforms

Análise de um queimador infravermelho funcionando com combustível híbrido : GLP/Bio-óleo

Biomass is considered the largest renewable energy source that can be used in an environmentally sustainable. From the pyrolysis of biomass is possible to obtain products with higher energy density and better use properties. The liquid resultant of this process is traditionally called bio-oil. The use of infrared burners in industrial applications has many advantages in terms of technical-operational, for example, uniformity in the heat supply in the form of radiation and convection, with a greater control of emissions due to the passage of exhaust gases through a macroporous ceramic bed. This paper presents a commercial infrared burner adapted with an ejector proposed able to burn a hybrid configuration of liquefied petroleum gas (LPG) and bio-oil diluted. The dilution of bio-oil with absolute ethanol aimed to decrease the viscosity of the fluid, and improving the stability and atomization. It was introduced a temperature controller with thermocouple modulating two stages (low heat / high heat), and solenoid valves for fuels supply. The infrared burner has been tested, being the diluted bio-oil atomized, and evaluated its performance by conducting energy balance. The method of thermodynamic analysis to estimate the load was used an aluminum plate located at the exit of combustion gases and the distribution of temperatures measured by thermocouples. The dilution reduced the viscosity of the bio-oil in 75.4% and increased by 11% the lower heating value (LHV) of the same, providing a stable combustion to the burner through the atomizing with compressed air and burns combined with LPG. Injecting the hybrid fuel there was increase in the heat transfer from the plate to the environment in 21.6% and gain useful benefit of 26.7%, due to the improved in the efficiency of the 1st Law of Thermodynamics of infrared burner

Digestibility and performance of pacu (Piaractus mesopotamicus) juveniles - fed diets containing different protein, lipid and carbohydrate levels

Due to lack of information on the use of non-protein energy sources in diets for pacu (Piaractus mesopotamicus), a 2 x 2 x 3 factorial experiment was conducted to evaluate the performance and digestibility of 12 diets containing approximately two crude protein (CP; 220 and 250 g kg(-1)), two lipid (40 and 80 g kg(-1)) and three carbohydrate levels (410, 460 and 500 g kg(-1)). The pacu juveniles-fed diets containing 220 g kg(-1) CP did not respond (P > 0.05) to increased dietary lipid and carbohydrate levels, but the fish-fed diets containing 250 g kg(-1) CP showed a better feed conversion ratio. There were interactions in weight gain (WG), specific growth rate (SGR), crude protein intake (CPI) and feed conversion rate (FCR) dependent on dietary carbohydrate and lipid levels, showing positive effects of increasing carbohydrate levels only for fish-fed diets containing 80 g kg(-1) lipid level. However, when the diets contained 40 g kg(-1) lipid, the best energy productive value (EPV) results were obtained at 460 g kg(-1) carbohydrate. A higher usage of lipids (80 g kg(-1)) reduced CPI and was detrimental to protein [apparent digestibility coefficient (ADC)(CP)] and energy (ADC(GE)), but did not affect growth. The ADC(GE) improved proportionally as dietary carbohydrate levels increased (P < 0.05), increasing the concentration of digestible energy. In addition, the WG, CPI, ADC(GE) results showed best use of the energy from carbohydrates when dietary protein level was 250 g kg(-1) CP. The utilization of 250 g kg(-1) CP in feeds for juvenile pacu for optimal growth is suggested. Therefore, the optimum dietary lipid and carbohydrate levels depend on their combinations. It can be stated that pacu uses carbohydrates as effectively as lipids in the maximization of protein usage, as long as it is not lower than 250 g kg(-1) CP or approximately 230 g kg(-1) digestible protein.

Caracterização de superfícies de titânio modificado por oxidação à plasma

Recent years have seen a significant growth in surface modifications in titanium implants, resulting in shorter healing times in regions with low bone density. Among the different techniques, subtraction by chemical agents to increase oxidation has been applied for surface treatment of dental implants. However, this technique is generally unable to remove undesirable oxides, formed spontaneously during machining of titanium parts, raising costs due to additional decontamination stages. In order to solve this problem, the present study used plasma as an energy source to both remove these oxides and oxidize the titanium surface. In this respect, Ti disks were treated by hollow cathode discharge, using a variable DC power supply and vacuum system. Samples were previously submitted to a cleaning process using an atmosphere of Ar, H2 and a mixture of both, for 20 and 60 min. The most efficient cleaning condition was used for oxidation in a mixture of argon (60%) and oxygen (40%) until reaching a pressure of 2.2 mbar for 60 min at 500°C. Surfaces were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), atomic force microscopy (AFM), adhesion and cell proliferation. SEM showed less cell spreading and a larger number of projections orfilopodia in the treated samples compared to the control sample. AFM revealed surface defects in the treated samples, with varied geometry between peaks and valleys. Biological assays showed no significant difference in cell adhesion between treated surfaces and the control. With respect to cell proliferation, the treated surface exhibited improved performance when compared to the control sample. We concluded that the process was efficient in removing primary oxides as well as in oxidizing titanium surfaces

Inclusão de amido em dietas para larvas de tilápia-do-nilo

O experimento foi realizado com o objetivo de avaliar a inclusão de amido em dietas para larvas de tilápia-do-nilo (Oreochromis niloticus). Foram utilizadas 375 larvas com 8,02 ± 2,11 mg de peso inicial, distribuídas em 25 aquários com capacidade unitária de 30 L, em um delineamento experimental inteiramente casualizado, com cinco tratamentos e cinco repetições. As rações foram formuladas para conter 0; 2,5; 5; 7,5 e 10% de amido, com 3.500 kcal ED/kg e 38,6% proteína digestível. Os peixes foram alimentados, à vontade, cinco vezes ao dia. O peso final, o ganho de peso, o fator de condição e a sobrevivência dos peixes alimentados com rações acrescidas de amido não diferiram em relação ao daqueles alimentados com a ração controle. O amido pode ser incluído como fonte energética em níveis de até 10% em rações para larvas de tilápia-do-nilo, pois não prejudica o desempenho dos peixes.

Fermentação alcoólica de substrato amiláceo e hidrolisado enriquecido com melaço de cana

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Memorial de formação: um dispositivo de pesquisa ação - formação

La recherche prend comme point de départ la dimension formative du mémoire de formation, considerée comme constitutive de l´écriture de soi, et cherche à problématiser cette dimension au tour du questionnement suivant: Comment le mémoire de formation devient-il un instrument de recherche-action-formation? Les analyses s´appuient sur les principes théoriques du paradigme anthropoformateur, proposé par Pineau (2005), les études réalisées par Passeggi (2006ª, 2006b, 2007, 2008ª, 2008b) sur les mémoires, les travaux de recherche de Nóvoa (1988, 1995), de Josso (2004), de Souza (2006) et de Fontana (2000), qui conçoivent la formação du point de vue de l´ apprenant. L´univers de la recherche s´est circonscrit à la situation de formation des éducateurs de la zone rurale, étudiants en Pédagogie dans le PROFORMAÇÃO (CAMEAM), à l´Univeristé de l´Etat du Rio Grande du Nord (UERN), pendant le second semestre de 2005. La recherche a croisé diférents types de démarche pour recueillir les données empiriques: l´observation du processus d´élaboration des mémoires; un questionnaire; des entretiens informels avec les enseignants en formation et avec les formateurs; et 09 mémoires, écrits par les participants de la recherche. Les analyses des données empiriques montrent que l´écriture des mémoires, en tant que démarche de recherche-action-formation, révelent que la dimension formative se dédouble en d´autres dimensions: etnosociologique, heuristique, herméneutique, social et afective, autopoiétique et politique. Dans la quête de soi (recherche), mise en oeuvre dans et par l´écriture (action), chaque narrateur construit de nouveaux sens à la vie et (re)signifient les représentations de soi (formation). Les résultats confirment la richesse et les potentialités du mémoire, même dans des conditions non ideal, ce qui permet d´affirmer as valeur travail académique important dans la formation des enseignants

Carbohydrate Composition and Water-Stable Aggregation of an Oxisol as Affected by Crop Sequence under No-Till

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fonte de energia alternativa: um estudo sobre a percepção ambiental, social e econômica do biodiesel com docentes do Centro de Tecnologia do gás da cidade de Natal RN

Meaning fuel and renewal energy source s derivative additives, the term biodiesel exists in Brazil since 1980, when it was signed its first patent by Expedito Parente. Since then, its importance has grown gradually due to the worsening of the ambient problems, since its use has became a highly promising alternative to the pollution decrease, as in the carbon dioxide issue as with the smoke and sulfur oxide. In Brazil, it was created the National Program of Production, whose objective is to insert the new product in the country s energy matrix, strengthening the economy and creating new employment opportunities, being an important product to the national energetic independence, since Brazil still imports diesel to its domestic consumption. This study aims to identify the ambient, social and economic perception of the teachers from the Technology Center of Natal city (CTGÁS-RN) to the biodiesel. For that, it was used a questionnaire closed questions, organized in the likart scale, directed to the tree spheres of the research analysis, the biodiesel and its social, ambient and economic nuances, totaling 31 questionnaires full answered. In its objectives, the research was descriptive and in its approach it was qualitative. To the data analysis it was used statistical tools (Statistic software, 6.1 version and Microsoft Excel 2003). The research revealed the predominance of the ambient aspect in the sight of the teachers, followed by the social ones. The economic factors represent a minor percentage in the analysis when compared to other

Desempenho e características de carcaça de bovinos Nelore em confinamento alimentados com bagaço de cana-de-açúcar e diferentes fontes energéticas

Avaliaram-se o ganho de peso e as características da carcaça de bovinos Nelore alimentados com bagaço de cana-de-açúcar (in natura ou hidrolisado) como volumoso e concentrado contendo farelo de gérmen de milho, casca do grão de soja ou polpa de citrus em substituição parcial (50%) ao milho. Quarenta bovinos Nelore (peso médio inicial de 340 kg e idade inicial de 32 meses) foram alimentados com quatro dietas fornecidas na proporção volumoso:concentrado 39:61. As fontes substitutivas do milho não afetaram o peso final (470,8; 478,6; 476,4 e 475,3 kg) e o ganho médio diário (1,1; 1,1; 1,1 e 1,2 kg/animal/dia). Não houve efeito sobre o rendimento de carcaça (55,3; 55,3; 54,0 e 54,8%), a área de Longissimus (24,2; 23,0; 25,0 e 23,2 cm²/100 kg de carcaça) e a espessura de gordura (4,4; 5,6; 4,7 e 4,4 mm). O menor custo por arroba foi observado no tratamento com polpa de citrus (R$ 44,20), seguido do farelo de gérmen de milho (R$ 48,80) e da casca de soja (R$ 50,80), porém, quando utilizado somente o milho, o custo da arroba foi de R$ 51,80. O milho moído pode ser parcialmente substituído pelo farelo de gérmen de milho, pela casca de soja ou pela polpa de citrus em dietas para bovinos em confinamento alimentados com bagaço de cana-de-açúcar (in natura ou hidrolisado) como volumoso, pois a substituição não alterou o ganho de peso e as características de carcaça.

Consumo e digestibilidade total e parcial de dietas utilizando farelo de girassol e três fontes de energia em novilhos confinados

Avaliaram-se o consumo alimentar, a digestibilidade parcial e total e o balanço de nitrogênio, em novilhos confinados. Foram utilizados três novilhos de corte cruzados, canulados no rúmen e no duodeno, distribuídos em dois delineamentos em quadrado latino 3 x 3. As dietas experimentais foram constituídas de 60% de silagem de milho, tendo como fonte de proteína o farelo de girassol e, como fonte de energia, o milho (MI). O milho foi substituído parcialmente pela casca de soja (CS) ou pelo farelo de gérmen de milho (FGM). Quatro indicadores internos (lignina e FDA, FDN e lignina indigestíveis) foram submetidos a 144 horas de digestão in vitro, para estimativa da digestibilidade parcial e total das dietas. Houve maior ingestão dos componentes fibrosos na dieta CS, porém não foi observado efeito sobre o consumo de matéria seca. A lignina subestimou significativamente a digestibilidade. A utilização da FDAi, FDNi e lignina-i para estimar a digestibilidade total é viável, no entanto, a FDAi e lignina-i não estimaram adequadamente as digestibilidades parciais. Houve efeito significativo na digestibilidade ruminal da FDA, com valores mais elevados para CS e semelhantes para FGM, em relação à dieta MI. A digestibilidade total da FDA foi maior na dieta CS, porém, as digestibilidades dos demais componentes não foram afetadas pelas diferentes fontes energéticas. Não houve diferença significativa para a digestibilidade da energia e nos valores obtidos de NDT, com média de 61,5%. A casca de soja e o farelo de gérmen de milho, em substituição parcial do milho, mostraram-se fontes alternativas satisfatórias para a inclusão na dieta de bovinos.

Desempenho, parâmetros plasmáticos e características de carcaça de novilhos alimentados com farelo de girassol e diferentes fontes energéticas, em confinamento

Avaliaram-se consumo, desempenho, parâmetros plasmáticos e características de carcaça de 24 novilhos, 3/4 Simental 1/4 Nelore, com peso médio inicial de 370 kg. As dietas foram compostas por 55% de silagem de milho e diferentes fontes energéticas: milho (MI) e substituição parcial do milho pela casca de soja (CS) ou pelo farelo de gérmen de milho (FGM), tendo como fonte de proteína o farelo de girassol. O período de avaliação de consumo e ganho de peso foi de 49 dias. Foram realizadas amostragens de sangue para mensuração dos parâmetros plasmáticos: glicose, uréia, proteína total e albumina. As meia-carcaças direitas resfriadas foram utilizadas para medir a área de olho de lombo (AOL), a espessura de gordura (EG) e o comprimento de carcaça. As dietas não influenciaram os parâmetros plasmáticos. A média obtida para uréia plasmática foi elevada (26,1 mg/dL). As diferentes fontes energéticas não afetaram o ganho de peso e a conversão alimentar, com médias de 1,15 kg/dia e 9,17 kg de MS ingerida/kg de ganho. Não houve efeito sobre o rendimento de carcaça (52,8% peso final e 63,11% PCV), AOL (63,6 cm²) e EG (4,7 mm). O grão de milho pode ser substituído parcialmente pela casca de soja e pelo farelo de gérmen de milho, em dietas para novilhos em confinamento, sem afetar o desempenho e as características de carcaça, permitindo que a escolha entre esses ingredientes seja realizada pela análise econômica.

Equalização neural aplicada a sistemas com modulação bidimensional em fibra óptica

Nowadays, optic fiber is one of the most used communication methods, mainly due to the fact that the data transmission rates of those systems exceed all of the other means of digital communication. Despite the great advantage, there are problems that prevent full utilization of the optical channel: by increasing the transmission speed and the distances involved, the data is subjected to non-linear inter symbolic interference caused by the dispersion phenomena in the fiber. Adaptive equalizers can be used to solve this problem, they compensate non-ideal responses of the channel in order to restore the signal that was transmitted. This work proposes an equalizer based on artificial neural networks and evaluates its performance in optical communication systems. The proposal is validated through a simulated optic channel and the comparison with other adaptive equalization techniques

Simulação da transferência de calor em amostras aquecidas por plasma

The processing of materials through plasma has been growing enough in the last times in several technological applications, more specifically in surfaces treatment. That growth is due, mainly, to the great applicability of plasmas as energy source, where it assumes behavior thermal, chemical and/or physical. On the other hand, the multiplicity of simultaneous physical effects (thermal, chemical and physical interactions) present in plasmas increases the complexity for understanding their interaction with solids. In that sense, as an initial step for the development of that subject, the present work treats of the computational simulation of the heating and cooling processes of steel and copper samples immersed in a plasma atmosphere, by considering two experimental geometric configurations: hollow and plane cathode. In order to reach such goal, three computational models were developed in Fortran 90 language: an one-dimensional transient model (1D, t), a two-dimensional transient model (2D, t) and a two-dimensional transient model (2D, t) which take into account the presence of a sample holder in the experimental assembly. The models were developed based on the finite volume method and, for the two-dimensional configurations, the effect of hollow cathode on the sample was considered as a lateral external heat source. The main results obtained with the three computational models, as temperature distribution and thermal gradients in the samples and in the holder, were compared with those developed by the Laboratory of Plasma, LabPlasma/UFRN, and with experiments available in the literature. The behavior showed indicates the validity of the developed codes and illustrate the need of the use of such computational tool in that process type, due to the great easiness of obtaining thermal information of interest