Non-contact measurement of respiratory function and deduction of tidal volume

 This paper further the investigation of Doppler radar feasibility in measuring the flow in and out due to inhalation and exhalation under different conditions of breathing activities. Three different experiment conditions were designed to investigate the feasibility and consistency of Doppler radar which includes the combination of the states of normal breathing, deep breathing and apnoea state were demonstrated. The obtained Doppler radar signals were correlated and compared with the gold standard medical device, spirometer, yielding a good correlations between both devices. We also demonstrated the calibration of the Doppler radar signal can be performed in a simple manner in order to have a good agreements with the spirometer readings. The measurement of the flow in and out during the breathing activities can be measured accurately under different dynamics of breathing as long as the calibration is performed correctly.

Development of mental health first aid guidelines for deliberate non-suicidal self-injury: a Delphi study

BACKGROUND: It is estimated that around 4% of the population engages, or has engaged, in deliberate non-suicidal self-injury. In clinical samples, the figures rise as high as 21%. There is also evidence to suggest that these figures may be increasing. A family member or friend may suspect that a person is injuring themselves, but very few people know how to respond if this is the case. Simple first aid guidelines may help members of the public assist people to seek and receive the professional help they require to overcome self-injury.

METHODS: This research was conducted using the Delphi methodology, a method of reaching consensus in a panel of experts. Experts recruited to the panels included 26 professionals, 16 people who had engaged in self-injurious behaviour in the past and 3 carers of people who had engaged in self-injurious behaviour in the past. Statements about providing first aid to a person engaged in self-injurious behaviour were sought from the medical and lay literature, but little was found. Panel members were asked to respond to general questions about first aid for NSSI in a variety of domains and statements were extracted from their responses. The guidelines were written using the items most consistently endorsed by the consumer and professional panels.

RESULTS: Of 79 statements rated by the panels, 18 were accepted. These statements were used to develop the guidelines appended to this paper.

CONCLUSION: There are a number of actions which are considered to be useful for members of the public when they encounter someone who is engaging in deliberate, non-suicidal self-injury. These guidelines will be useful in revising curricula for mental health first aid and NSSI first aid training programs. They can also be used by members of the public who want immediate information about how to assist a person who is engaging in such behaviour.

Web-based alcohol screening and brief intervention for Māori and non-Māori: the New Zealand e-SBINZ trials

BACKGROUND: Hazardous alcohol consumption is a leading modifiable cause of mortality and morbidity among young people. Screening and brief intervention (SBI) is a key strategy to reduce alcohol-related harm in the community, and web-based approaches (e-SBI) have advantages over practitioner-delivered approaches, being cheaper, more acceptable, administrable remotely and infinitely scalable. An efficacy trial in a university population showed a 10-minute intervention could reduce drinking by 11% for 6 months or more among 17-24 year-old undergraduate hazardous drinkers. The e-SBINZ study is designed to examine the effectiveness of e-SBI across a range of universities and among Māori and non-Māori students in New Zealand. METHODS/DESIGN: The e-SBINZ study comprises two parallel, double blind, multi-site, individually randomised controlled trials. This paper outlines the background and design of the trial, which is recruiting 17-24 year-old students from seven of New Zealand's eight universities. Māori and non-Māori students are being sampled separately and are invited by e-mail to complete a web questionnaire including the AUDIT-C. Those who score >4 will be randomly allocated to no further contact until follow-up (control) or to assessment and personalised feedback (intervention) via computer. Follow-up assessment will occur 5 months later in second semester. Recruitment, consent, randomisation, intervention and follow-up are all online. Primary outcomes are (i) total alcohol consumption, (ii) frequency of drinking, (iii) amount consumed per typical drinking occasion, (iv) the proportions exceeding medical guidelines for acute and chronic harm, and (v) scores on an academic problems scale. DISCUSSION: The trial will provide information on the effectiveness of e-SBI in reducing hazardous alcohol consumption across diverse university student populations with separate effect estimates for Māori and non-Māori students. TRIAL REGISTRATION: Australian New Zealand Clinical Trials Registry (ANZCTR) ACTRN12610000279022.

Patients' perceptions of participation in nursing care on medical wards

BACKGROUND: Patient participation benefits the patient and is a core concept of patient-centred care. Patients believe in their ability to prevent errors; thus, they may play a vital role in combating adverse event rates in hospitals. AIMS AND OBJECTIVES: To explore hospitalised medical patients' perceptions of participating in nursing care, including the barriers and facilitators for this activity. RESEARCH METHODS: This interpretive study was conducted on four medical wards, in two hospitals. Purposeful maximum variation sampling was operationalised to recruit patients that differed in areas such as age, gender and mobility status. In-depth semi-structured audiotaped interviews were undertaken and analysed using inductive content analysis. RESULTS: Twenty patients participated in the study. Four categories were uncovered in the data. First, valuing participation showed patients' willingness to participate, viewing it as a worthwhile task. Second, exchanging intelligence was a way of participating where patients' knowledge was built and shared with health professionals. Third, on the lookout was a type of participation where patients monitored their care, showing an attentive approach towards their own safety. Fourth, power imbalance was characterised by patients feeling their opportunities for participation were restricted. CONCLUSIONS: Patients were motivated to participate and valued participation. Cultivating this motivation may be crucial to patient empowerment and practices of safety monitoring, a fundamental strategy to addressing patient safety issues in hospitals. Engaging nurse-patient relationships, inclusive of knowledge sharing, is required in practice to empower patients to participate. Educating patients on the consequences of non-participation may motivate them, while nurses may benefit from training on patient-centred approaches. Future research should address ways to increase patient motivation and opportunities to participate.

The role of dietary choices and medical expenditures on health outcomes when health shocks are endogenous

This paper presents a theoretical framework that incorporates both a role for preventive actions (through food choices) and treatment (through medical services) to improve health outcomes. In particular, we allow for an agent's calorie decision to alter the distribution of future health shocks. Once a shock is realized, medical care can be used to improve health outcomes. Thus this model can help us determine the role of the preventive actions and treatments in producing better health outcomes and study the links between an agent's choice of medical services and her diet. This framework suggests that wealthier individuals, on average, have lower morbidity rates and lead a healthier lifestyle than lower income agents. Finally, our numerical exercise captures U.S. cross-sectional facts regarding the choice of diet, medical expenditures as well as health and non-food expenditures.

How do postgraduate qualifications in medical education impact on health professionals?

Background and Purpose: The number of degree-awarding programmes in medical education is steadily increasing. Despite the popularity and extensive investment in these courses, there is little research into their impact. This study investigated the perceived impact of an internationally-renowned postgraduate programme in medical education on health professionals’ development as educators.

Methods: An online survey of the 2008–12 graduates from the Centre for Medical Education, University of Dundee was carried out. Their self-reported shifts in various educational competencies and scholarship activities were analysed using non-parametric statistics. Qualitative data were also collected and analysed to add depth to the quantitative findings.

Results: Of the 504 graduates who received the online questionnaire 224 responded. Participants reported that a qualification in medical education had significantly (p < 0.001) improved their professional educational practices and engagement in scholarly activities. Masters graduates reported greater impact compared to Certificate graduates on all items, including ability to facilitate curriculum reforms, and in assessment and feedback practices. Masters graduates also reported more engagement in scholarship activities, with significantly greater contributions to journals. These qualifications equally benefited all participants regardless of age. International graduates reported greater impact of the qualification than their UK counterparts.

Conclusion: A postgraduate medical education programme can significantly impact on the practices and behaviours of health professionals in education, improving self-efficacy and instilling an increased sense of belonging to the educational community.

Selecting, training and assessing new general practice community teachers in UK medical schools

Background: Standards for undergraduate medical education in the UK, published in Tomorrow’s Doctors, include the criterion ‘everyone involved in educating medical students will be appropriately selected, trained, supported and appraised’. Aims: To establish how new general practice (GP) community teachers of medical students are selected, initially trained and assessed by UK medical schools and establish the extent to which Tomorrow’s Doctors standards are being met. Method: A mixed-methods study with questionnaire data collected from 24 lead GPs at UK medical schools, 23 new GP teachers from two medical schools plus a semi-structured telephone interview with two GP leads. Quantitative data were analysed descriptively and qualitative data were analysed informed by framework analysis. Results: GP teachers’ selection is non-standardised. One hundred per cent of GP leads provide initial training courses for new GP teachers; 50% are mandatory. The content and length of courses varies. All GP leads use student feedback to assess teaching, but other required methods (peer review and patient feedback) are not universally used. Conclusions: To meet General Medical Council standards, medical schools need to include equality and diversity in initial training and use more than one method to assess new GP teachers. Wider debate about the selection, training and assessment of new GP teachers is needed to agree minimum standards.

What are the perceived learning needs of Australian general practice registrars for quality prescribing?

BACKGROUND: Little is known about the perceived learning needs of Australian general practice (GP) registrars in relation to the quality use of medicines (QUM) or the difficulties experienced when learning to prescribe. This study aimed to address this gap. METHODS: GP registrars' perceived learning needs were investigated through an online national survey, interviews and focus groups. Medical educators' perceptions were canvassed in semi-structured interviews in order to gain a broader perspective of the registrars' needs. Qualitative data analysis was informed by a systematic framework method involving a number of stages. Survey data were analysed descriptively. RESULTS: The two most commonly attended QUM educational activities took place in the workplace and through regional training providers. Outside of these structured educational activities, registrars learned to prescribe mainly through social and situated means. Difficulties encountered by GP registrars included the transition from hospital prescribing to prescribing in the GP context, judging how well they were prescribing and identifying appropriate and efficient sources of information at the point of care. CONCLUSIONS: GP registrars learn to prescribe primarily and opportunistically in the workplace. Despite many resources being expended on the provision of guidelines, decision-support systems and training, GP registrars expressed difficulties related to QUM. Ways of easing the transition into GP and of managing the information 'overload' related to medicines (and prescribing) in an evidence-guided, efficient and timely manner are needed. GP registrars should be provided with explicit feedback about the process and outcomes of prescribing decisions, including the use of audits, in order to improve their ability to judge their own prescribing.

The introduction of an undergraduate interventional radiology (IR) curriculum: impact on medical student knowledge and interest in IR

INTRODUCTION: Interventional radiology (IR) plays a vital role in modern medicine, with increasing demand for services, but with a shortage of experienced interventionalists. The aim of this study was to determine the impact of a recently introduced IR curriculum on perception, knowledge, and interest of medical students regarding various aspects of IR. METHODS: In 2014, an anonymous web-based questionnaire was sent to 309 4th year medical students in a single institution within an EU country, both before and after delivery of a 10-h IR teaching curriculum. RESULTS: Seventy-six percent (236/309) of the respondents participated in the pre-IR module survey, while 50 % (157/309) responded to the post-IR module survey. While 62 % (147/236) of the respondents reported poor or no knowledge of IR compared to other medical disciplines in the pre-IR module survey, this decreased to 17 % (27/157) in the post-IR module survey. The correct responses regarding knowledge of selected IR procedures improved from 70 to 94 % for venous access, 78 to 99 % for uterine fibroid embolization, 75 to 97 % for GI bleeding embolization, 60 to 92 % for trauma embolization, 71 to 92 % for tumor ablation, and 81 to 94 % for angioplasty and stenting in peripheral arterial disease. With regard to knowledge of IR clinical roles, responses improved from 42 to 59 % for outpatient clinic review of patients and having inpatient beds, 63-76 % for direct patient consultation, and 43-60 % for having regular ward rounds. The number of students who would consider a career in IR increased from 60 to 73 %. CONCLUSION: Delivering an undergraduate IR curriculum increased the knowledge and understanding of various aspects of IR and also the general enthusiasm for pursuing this specialty as a future career choice.

Medical textiles as vascular implants and their success to mimic natural arteries

Vascular implants belong to a specialised class of medical textiles. The basic purpose of a vascular implant (graft and stent) is to act as an artificial conduit or substitute for a diseased artery. However, the long-term healing function depends on its ability to mimic the mechanical and biological behaviour of the artery. This requires a thorough understanding of the structure and function of an artery, which can then be translated into a synthetic structure based on the capabilities of the manufacturing method utilised. Common textile manufacturing techniques, such as weaving, knitting, braiding, and electrospinning, are frequently used to design vascular implants for research and commercial purposes for the past decades. However, the ability to match attributes of a vascular substitute to those of a native artery still remains a challenge. The synthetic implants have been found to cause disturbance in biological, biomechanical, and hemodynamic parameters at the implant site, which has been widely attributed to their structural design. In this work, we reviewed the design aspect of textile vascular implants and compared them to the structure of a natural artery as a basis for assessing the level of success as an implant. The outcome of this work is expected to encourage future design strategies for developing improved long lasting vascular implants.

Simplifying medical additive manufacturing: making the surgeon the designer

Additive Manufacturing, a technology which has been in existence since three decades, is now successfully being transitioned from a research setting to finding technologically and financially viable end-user applications. A key sector in which Additive Manufacturing is being used is the medical devices and healthcare sector. Drivers in this sector include the ability to create customized, patient specific devices and implants with quick turnaround time in a cost-effective manner. Doctors and surgeons are important change agents and innovators in the creation of new healthcare devices as well as surgical methods. Often times, they may find it necessary at first to build devices and plan surgeries which are not even being thought of or acted upon by the major healthcare companies. In this sense, they perform the roles of designers, creating new ideas and improving on them until they can be implemented and adopted by others. However, the scope for performing this creative activity is often limited in their workplaces, with resource, time and financial impediments often being present. Additive Manufacturing can be helpful to speed up the iterative process of designing such medical devices or planning surgeries as well as help convince people outside of the surgery room of the feasibility and business case for such innovations. This paper proposes to introduce a framework of design, processes and tools which will enable non-engineers (specifically surgeons) to create custom-built products. It is hoped that this paper will motivate more surgeons and non-engineers to get involved in the process of designing for additive manufacturing.

Influence of body mass index on prescribing costs and potential cost savings of a weight management programme in primary care

Objectives Prescribed medications represent a high and increasing proportion of UK health care funds. Our aim was to quantify the influence of body mass index (BMI) on prescribing costs, and then the potential savings attached to implementing a weight management intervention.

Methods Paper and computer-based medical records were reviewed for all drug prescriptions over an 18-month period for 3400 randomly selected adult patients (18–75 years) stratified by BMI, from 23 primary care practices in seven UK regions. Drug costs from the British National Formulary at the time of the review were used. Multivariate regression analysis was applied to estimate the cost for all drugs and the ‘top ten’ drugs at each BMI point. This allowed the total and attributable prescribing costs to be estimated at any BMI. Weight loss outcomes achieved in a weight management programme (Counterweight) were used to model potential effects of weight change on drug costs. Anticipated savings were then compared with the cost programme delivery. Analysis was carried out on patients with follow-up data at 12 and 24 months as well as on an intention-to-treat basis. Outcomes from Counterweight were based on the observed lost to follow-up rate of 50%, and the assumption that those patients would continue a generally observed weight gain of 1 kg per year from baseline.

Results The minimum annual cost of all drug prescriptions at BMI 20 kg/m2 was £50.71 for men and £62.59 for women. Costs were greater by £5.27 (men) and £4.20 (women) for each unit increase in BMI, to a BMI of 25 (men £77.04, women £78.91), then by £7.78 and £5.53, respectively, to BMI 30 (men £115.93 women £111.23), then by £8.27 and £4.95 to BMI 40 (men £198.66, women £160.73). The relationship between increasing BMI and costs for the top ten drugs was more pronounced. Minimum costs were at a BMI of 20 (men £8.45, women £7.80), substantially greater at BMI 30 (men £23.98, women £16.72) and highest at BMI 40 (men £63.59, women £27.16). Attributable cost of overweight and obesity accounted for 23% of spending on all drugs with 16% attributable to obesity. The cost of the programme was estimated to be approximately £60 per patient entered. Modelling weight reductions achieved by the Counterweight weight management programme would potentially reduce prescribing costs by £6.35 (men) and £3.75 (women) or around 8% of programme costs at one year, and by £12.58 and £8.70, respectively, or 18% of programme costs after two years of intervention. Potential savings would be increased to around 22% of the cost of the programme at year one with full patient retention and follow-up.

Conclusion Drug prescriptions rise from a minimum at BMI of 20 kg/m2 and steeply above BMI 30 kg/m2. An effective weight management programme in primary care could potentially reduce prescription costs and lead to substantial cost avoidance, such that at least 8% of the programme delivery cost would be recouped from prescribing savings alone in the first year.

Effects of antidepressants on postmenopausal bone loss - a 5-year longitudinal study from the OSTPRE cohort

BACKGROUND: Osteoporosis and depression are major health problems worldwide. The association between antidepressants, a treatment for depression, and bone health needs more detailed exploration. OBJECTIVE: The present study investigates antidepressant medication use and postmenopausal bone loss over time. METHODS: A total of 1988 women (aged 57-67) participating in the Kuopio Osteoporosis Risk Factor and Prevention Study (OSTPRE) cohort responded to a postal enquiry and had their femoral neck bone mineral density (BMD) measured in 1999 and again in 2004. Data on antidepressant use was obtained from the National Prescription Register. Multiple regression techniques were used to test the associations, before and after adjustment for anthropometric, medical, physical and lifestyle factors. RESULTS: Over the five years of follow-up, 319 (16.0%) women purchased antidepressants. Mean baseline femoral neck BMD for the entire study group was 881mg/cm(2) (SD 123) and mean 5-year bone loss was 6.0mg/cm(2) (SD 4.7). After adjustments, users of tricyclic antidepressants (TCA) had greater annual BMD loss than non-users (-3.6mg/cm(2) vs. -1.1mg/cm(2); P=0.031). Accelerated bone loss was also associated with selective serotonin reuptake inhibitor's (SSRI) use (P=0.001) and use of other antidepressants in a dose-response way, with the latter only among women of low-weight and normal-weight women who had lost weight over the study period. CONCLUSIONS: In conclusion, the use of SSRIs seems to accelerate postmenopausal bone loss in a dose-response manner. Associations between TCA and other antidepressant use and bone loss may also exist. Thus, the possibility of increased risk of osteoporosis should be considered when prescribing antidepressants for postmenopausal women.

Impact of worksite health-promotion programs in hospital admission costs and medical leaves in a sample of brazilian companies

Programas de saúde e bem-estar têm sido adotados por empresas como forma de melhorar a saúde de empregados, e muitos estudos descrevem retornos econômicos positivos sobre os investimentos envolvidos. Entretanto, estudos mais recentes com metodologia melhor têm demonstrado retornos menores. O objetivo deste estudo foi investigar se características de programas de saúde e bem-estar agem como preditores de custos de internação hospitalar (em Reais correntes) e da proporção de funcionários que têm licença médica, entre Abril de 2014 e Maio de 2015, em uma amostra não-aleatória de empresas no Brasil, através de parceria com uma empresa gestora de ‘big data’ para saúde. Um questionário sobre características de programas de saúde no ambiente de trabalho foi respondida por seis grandes empresas brasileiras. Dados retirados destes seis questionários (presença e idade de programa de saúde, suas características – inclusão de atividades de screening, educação sobre saúde, ligação com outros programas da empresa, integração do programa à estrutura da empresa, e ambientes de trabalho voltado para a saúde – e a adoção de incentivos financeiros para aderência de funcionários ao programa), bem como dados individuais de idade, gênero e categoria de plano de saúde de cada empregado , foram usados para construir um banco de dados com mais de 76.000 indivíduos. Através de um modelo de regressão múltipla e seleção ‘stepwise’ de variáveis, a idade do empregado foi positivamente associada e a idade do programa de saúde e a categoria ‘premium’ de plano de saúde do funcionário foram negativamente associadas aos custos de internação hospitalar (como esperado). Inesperadamente, a inclusão de programas de screening e iniciativas de educação de saúde nos programas de saúde e bem-estar nas empresas foram identificados como preditores positivos significativos para custos de admissão hospitalar. Para evitar a inclusão errônea de licenças-maternidade, apenas os dados de licença médica de pacientes do sexo masculino foram analisados (dados disponíveis apenas para duas entre as companhias incluídas, com um total de 18.957 pacientes do sexo masculino). Analisando estes dados através de um teste Z para comparação de proporções, a empresa com programa de saúde que inclui atividades voltadas a cessação de hábitos ruins (como tabagismo e etilismo), controle de diabetes e hipertensão, e que adota incentivos financeiros para a aderência de funcionários ao programa tem menor proporção de empregados com licençca médica no período analisado, quando comparada com a outra empresa que não tem estas características (também conforme esperado). Entretanto, a companhia com menor proporção de funcionários com licença médica também foi aquela que adota programa de screening entre as atividades de seu programa de saúde. Potenciais fontes de ameaça à validade interna e externa destes resultados são discutidas, bem como possíveis explicações para a associação entre programas de screening e educação médica a piores indicadores de saúde nesta amostra de companhias são discutidas. Novos estudos com melhor desenho, com amostras maiores e randômicas são necessários para validar estes resultados e possivelmente melhorar a validade interna e externa destes resultados.

JML- Based formal development of a Java card application for managing medical appointments

Although formal methods can dramatically increase the quality of software systems, they have not widely been adopted in software industry. Many software companies have the perception that formal methods are not cost-effective cause they are plenty of mathematical symbols that are difficult for non-experts to assimilate. The Java Modelling Language (short for JML) Section 3.3 is an academic initiative towards the development of a common formal specification language for Java programs, and the implementation of tools to check program correctness. This master thesis work shows how JML based formal methods can be used to formally develop a privacy sensitive Java application. This is a smart card application for managing medical appointments. The application is named HealthCard. We follow the software development strategy introduced by João Pestana, presented in Section 3.4. Our work influenced the development of this strategy by providing hands-on insight on challenges related to development of a privacy sensitive application in Java. Pestana’s strategy is based on a three-step evolution strategy of software specifications, from informal ones, through semiformal ones, to JML formal specifications. We further prove that this strategy can be automated by implementing a tool that generates JML formal specifications from a welldefined subset of informal software specifications. Hence, our work proves that JML-based formal methods techniques are cost-effective, and that they can be made popular in software industry. Although formal methods are not popular in many software development companies, we endeavour to integrate formal methods to general software practices. We hope our work can contribute to a better acceptance of mathematical based formalisms and tools used by software engineers. The structure of this document is as follows. In Section 2, we describe the preliminaries of this thesis work. We make an introduction to the application for managing medical applications we have implemented. We also describe the technologies used in the development of the application. This section further illustrates the Java Card Remote Method Invocation communication model used in the medical application for the client and server applications. Section 3 introduces software correctness, including the design by contract and the concept of contract in JML. Section 4 presents the design structure of the application. Section 5 shows the implementation of the HealthCard. Section 6 describes how the HealthCard is verified and validated using JML formal methods tools. Section 7 includes some metrics of the HealthCard implementation and specification. Section 8 presents a short example of how a client-side of a smart card application can be implemented while respecting formal specifications. Section 9 describes a prototype tools to generate JML formal specifications from informal specifications automatically. Section 10 describes some challenges and main ideas came acrorss during the development of the HealthCard. The full formal specification and implementation of the HealthCard smart card application presented in this document can be reached at https://sourceforge.net/projects/healthcard/.