Differences in lung function, growth parameters and frequency of hospital admissions between adolescents with cystic fibrosis-related diabetes and controls

As survival of patients with CF increases,glucose intolerance and cystic fibrosisrelated diabetes (CFRD),ar e increasingly recognised common complications. CFRD may be preceded by a pre-diabetic state. Using markers identified as being associated with CFRD may improve targeted screening. Aim: To identify features consistently predicting CFRD in paediatric patients. Patients diagnosed with CFRD between January 1997–January 2002 were compared with age and sex matched controls. Clinical,micr obiological, and hospitalisation data was collected at time of CFRD diagnosis,and at six monthly intervals for 3 yr prior to diagnosis. Eight patients with CFRD were identified,mean age 13.7 yr (S.D. 3.49) at time of diagnosis. Control patients underwent OGTT to ensure normal glucose tolerance. Patients with CFRD had a lower FEV1 up to 12 months prior to diagnosis however, this was only significant at diagnosis. There was no difference in weight and height z scores between the 2 groups; however,the decrease in weight and height z scores in the CFRD group over 3 yr prior to diagnosis was significant. Mean number of days in hospital and admissions per patient significantly increased in the CFRD group,6 months prior to diagnosis. No other significant differences were observed between the 2 groups. Conclusions: This study has shown a difference in lung function,gr owth parameters and frequency of hospital admissions between patients with CFRD and controls. These differences may be utilised as tools for targeted screening in the paediatricyadolescent population. Further larger scale studies are required to improve guidelines for targeted screening in this population.

A comparison of the whole-body and segmental methodologies of bioimpedance analysis

Theory supports the use of a segmental methodology (SM) for bioimpedance analysis (BIA) of body water (BW). However, previous studies have generally failed to show a significant improvement when the SM is used in place of a whole-body methodology. A pilot study was conducted to compare the two methodologies in control and overweight subjects. BW of each subject was measured by D2O dilution and also estimated from BIA measurements. Bland and Altman analysis was used to compare the two values of BW. The SM resulted in a small but not significantly improved limits of agreement of measured and BIA estimated BW (psimilar to0.3). This and the results of previous studies suggest that improvements in prediction of BW obtained from application of the SM may be intrinsically small and may not justify the additional effort in application.

Caracterização molecular, formação de biofilme e susceptibilidade a antimicrobianos de isolados de E. coli de aderência difusa Afa/Dr e não Afa/Dr

A Escherichia coli de aderência difusa (DAEC), um patotipo diarreiogênico de E. coli, corresponde a um grupo heterogêneo sem marcador de virulência comum a todos os isolados e de papel controverso na diarreia infantil. O objetivo deste estudo foi caracterizar genotipica e fenotipicamente amostras de DAEC, portadoras e não portadoras de adesinas Afa/Dr, isoladas de crianças com e sem diarreia. Em 70 amostras de DAEC, PCR foi realizado para pesquisa de genes descritos em DAEC, EAEC ou UPEC, que codificam: (i) oito adesinas fimbriais e afimbriais (fimH, papC, sfa, aggA, aafA, agg3A, aidA/aah, afaC); (ii) cinco toxinas (pet, astA, set1A, sat, hlyA); (iii) três proteínas captadoras/receptora de ferro (irp2, iucA, chuA/shuA); (iv) invasina (daaD) e; antígeno 43 (agn43). Ensaio de formação de biofilme foi realizado a partir da bactéria cultivada em caldo Luria-Bertani e inoculada em placas de poliestireno com DMEM suplementado com 0,4% glicose. A leitura da densidade ótica (DO490) foi realizada após coloração com safranina. Soroaglutinação para 23 antígenos O (Probac do Brasil) foi realizada em 50% das DAEC. Método de difusão de disco foi realizado para testar a suscetibilidade a 13 antimicrobianos. A presença de pelo menos um gene que codifica adesinas, toxinas, proteínas captadoras/receptora de ferro, invasina ou antígeno 43 foram encontrados em 58,6%, 51,4%, 80%, 48,6% e 57,1%, respectivamente, com os genes fimH, irp2, agn43, iucA, chuA/shuA, presentes em mais de 50% das amostras. Gene afaC+ (PCR) e/ou sonda afaBC+ (hibridização de colônias) classificou 50% das DAEC como Afa/Dr, sendo pet, sat, irp2, iucA, chuA/shuA e agn43 significantes nessas amostras (p<0,05). Do total das DAEC, 44,3% foram formadoras de biofilme, igualmente distribuídas entre as Afa/Dr e não Afa/Dr, e nenhum gene foi associado com esse fenótipo. Sorologia de 35 amostras evidenciou os seguintes sorogrupos: 1 O29, 2 O125, 2 O127 e 7 O86. Todas as O86 foram de DAEC Afa/Dr. Maiores frequências de resistência antimicrobiana foram encontradas para ampicilina (55,7%), sulfametoxazol/trimetoprim (35,7%) e tetraciclina (28,6%) e o perfil resistente/intermediário para amoxicilina/ácido clavulânico, ampicilina, sulfametoxazol/trimetoprim foi significante nas DAEC Afa/Dr, assim como a multi-droga resistência (p<0,05). Em conclusão, observou-se: (i) alta frequência de fimH e pet e presença de agn43, até então não descrito em DAEC, em frequências similares àquelas encontradas em EAEC, UPEC e EAEC/UPEC, respectivamente; (ii) que as amostras de DAEC Afa/Dr e não Afa/Dr constituíram grupos com perfis genéticos diferenciados entre si; (iii) poucos sorogrupos foram encontrados entre as DAEC; (iv) frequências de resistência menores quando comparado com as poucas descrições em DAEC, sugerindo uma menor pressão seletiva da população do presente estudo e; (v) amostras de DAEC Afa/Dr podem representar um importante reservatório de genes de resistência a antimicrobianos, além de diversos fatores de virulência.

Multi-level governance and social cohesion in the European Union: the assessment of local agents, a study case inside Galicia

Implementing multi-level governance has been a key priority in EU cohesion policy. This study assesses the perceived achievements and shortcomings in implementing European Social Fund by analyzing the deficits and weaknesses as well as the poor participation of local agents who are in direct contact with the beneficiaries in order to design and implement this fund, which is the main financial instrument of EU social policy.

Multi-scale modeling of the mechanical behavior of polymer-based materials

Polymers have become the reference material for high reliability and performance applications. In this work, a multi-scale approach is proposed to investigate the mechanical properties of polymeric based material under strain. To achieve a better understanding of phenomena occurring at the smaller scales, a coupling of a Finite Element Method (FEM) and Molecular Dynamics (MD) modeling in an iterative procedure was employed, enabling the prediction of the macroscopic constitutive response. As the mechanical response can be related to the local microstructure, which in turn depends on the nano-scale structure, the previous described multi-scale method computes the stress-strain relationship at every analysis point of the macro-structure by detailed modeling of the underlying micro- and meso-scale deformation phenomena. The proposed multi-scale approach can enable prediction of properties at the macroscale while taking into consideration phenomena that occur at the mesoscale, thus offering an increased potential accuracy compared to traditional methods.

Coupling Mechanical and Electrical Behavior in the Multi-scale Simulation of Polymer-based CNT Nanocomposites

A numeric model has been proposed to investigate the mechanical and electrical properties of a polymeric/carbon nanotube (CNT) composite material subjected to a deformation force. The reinforcing phase affects the behavior of the polymeric matrix and depends on the nanofiber aspect ratio and preferential orientation. The simulations show that the mechanical behavior of a computer generated material (CGM) depends on fiber length and initial orientation in the polymeric matrix. It is also shown how the conductivity of the polymer/CNT composite can be calculated for each time step of applied stress, effectively providing the ability to simulate and predict strain-dependent electrical behavior of CNT nanocomposites.

Measuring fund performance using multi-factor models: evidence for the Portuguese market

This paper examines the performance of Portuguese equity funds investing in the domestic and in the European Union market, using several unconditional and conditional multi-factor models. In terms of overall performance, we find that National funds are neutral performers, while European Union funds under-perform the market significantly. These results do not seem to be a consequence of management fees. Overall, our findings are supportive of the robustness of conditional multi-factor models. In fact, Portuguese equity funds seem to be relatively more exposed to smallcaps and more value-oriented. Also, they present strong evidence of time-varying betas and, in the case of the European Union funds, of time-varying alphas too. Finally, in terms of market timing, our tests suggest that mutual fund managers in our sample do not exhibit any market timing abilities. Nevertheless, we find some evidence of timevarying conditional market timing abilities but only at the individual fund level.

Predicting the mechanical behavior of amorphous polymeric materials under strain through multi-scale simulation

Polymeric materials have become the reference material for high reliability and performance applications. However, their performance in service conditions is difficult to predict, due in large part to their inherent complex morphology, which leads to non-linear and anisotropic behavior, highly dependent on the thermomechanical environment under which it is processed. In this work, a multiscale approach is proposed to investigate the mechanical properties of polymeric-based material under strain. To achieve a better understanding of phenomena occurring at the smaller scales, the coupling of a finite element method (FEM) and molecular dynamics (MD) modeling, in an iterative procedure, was employed, enabling the prediction of the macroscopic constitutive response. As the mechanical response can be related to the local microstructure, which in turn depends on the nano-scale structure, this multiscale approach computes the stress-strain relationship at every analysis point of the macro-structure by detailed modeling of the underlying micro- and meso-scale deformation phenomena. The proposed multiscale approach can enable prediction of properties at the macroscale while taking into consideration phenomena that occur at the mesoscale, thus offering an increased potential accuracy compared to traditional methods.

Multi-centre validation of an automatic algorithm for fast 4D myocardial segmentation in cine CMR datasets

Quantitative analysis of cine cardiac magnetic resonance (CMR) images for the assessment of global left ventricular morphology and function remains a routine task in clinical cardiology practice. To date, this process requires user interaction and therefore prolongs the examination (i.e. cost) and introduces observer variability. In this study, we sought to validate the feasibility, accuracy, and time efficiency of a novel framework for automatic quantification of left ventricular global function in a clinical setting.

Multi-attribute classification of housing conservation status in urban regeneration actions

Urban regeneration is more and more a “universal issue” and a crucial factor in the new trends of urban planning. It is no longer only an area of study and research; it became part of new urban and housing policies. Urban regeneration involves complex decisions as a consequence of the multiple dimensions of the problems that include special technical requirements, safety concerns, socio-economic, environmental, aesthetic, and political impacts, among others. This multi-dimensional nature of urban regeneration projects and their large capital investments justify the development and use of state-of-the-art decision support methodologies to assist decision makers. This research focuses on the development of a multi-attribute approach for the evaluation of building conservation status in urban regeneration projects, thus supporting decision makers in their analysis of the problem and in the definition of strategies and priorities of intervention. The methods presented can be embedded into a Geographical Information System for visualization of results. A real-world case study was used to test the methodology, whose results are also presented.

Simulador multi-agente para o mercado eléctrico

Esta dissertação, apresenta um simulador multi-agente para o mercado eléctrico. Neste simulador agentes heterogéneos, racionalmente limitados e com capacidade de aprendizagem, co-evoluem dinamicamente. O modelo de mercado apresentado é inspirado no mercado diário do MIBEL. É um modelo Pool, gerido por uma entidade operadora de mercado, onde compradores e vendedores podem licitar energia. No lado vendedor, empresas produtoras licitam a energia das suas unidades produtoras em pares quantidadepre ço. Por outro lado, uma vez que o cenário simulado é um mercado de venda, o comprador apresenta uma procura xa, i.e., submete apenas quantidades de energia. Todas as entidades do mercado eléctrico são vistas no sistema multi-agente, modelado através da plataforma INGENIAS, como agentes autónomos. Pelos resultados obtidos nas experiências feitas, confere-se que o simulador é uma ferramenta de apoio à tomada de decisão, pois ajuda a compreender o comportamento emergente do mercado e avalia o impacto das acções escolhidas, manualmente, pelo utilizador ou, automaticamente, atrav és da aprendizagem por reforço. A aprendizagem por reforço visa facilitar a tomada de decisão humana na venda de energia, licitando a energia das unidades produtoras de forma a maximizar os lucros.

XRCC3 THR241MET polymorphism influence on nuclear buds frequency in exposed to formaldehyde

Formaldehyde (FA), also known as formalin, formal and methyl aldehydes, is a colorless, flammable, strong-smelling gas. It has an important application in embalming tissues and that result in exposures for workers in the pathology anatomy laboratories and mortuaries. Occupational exposure to FA has been shown to induce nasopharyngeal cancer and has been classified as carcinogenic to humans (group 1) on the basis of sufficient evidence in humans and sufficient evidence in experimental animals. Manifold in vitro studies clearly indicated that FA is genotoxic. FA induced various genotoxic effects in proliferating cultured mammalian cells. The cytokinesis-block micronucleus (CBMN) assay was originally developped as an ideal system form easuring micronucleus (MN), however it can also be used to measure nucleoplasmic bridges (NBP) and nuclear buds (NBUD). Over the past decade another unique mechanism of micronucleus formation, known as nuclear budding has emerged. NBUDS is considered as a marker of gene amplification and/or altered gene dosage because the nuclear budding process is the mechanism by which cells removed amplified and/excess DNA.