Maintenance of Manioc Diversity by Traditional Farmers in the State of Mato Grosso, Brazil: A 20-Year Comparison

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Brief Report: The lincRNA Hotair Is Required for Epithelial-to-Mesenchymal Transition and Stemness Maintenance of Cancer Cell Lines

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Body Composition and Net Energy Requirements for Maintenance of Non-Castrated Water Buffaloes (Bubalus bubalis)

The research aimed to estimate body contents of protein and energy and net requirements of energy for maintenance of buffaloes, slaughtered at different stages of maturity. There were used 14 Mediterranean intact males with initial average body weight of 352.2 +/- 24.3 kg and average age of 24 months. The animais were randomly divided into four experimental groups. One group was designed to slaughter at the beginning of the experimental period (IS). The animals of another group were restricting fed, receiving, individually, levels of protein and energy 15% above maintenance (RF). The animals of the two remaining groups were individually fed ad libitum (SW450 and SW500) to reach weights corresponding to 100 and 110 percent of the mature weight of the buffalo cows (respectively 450 and 550 kg). The ration contained ground-corn cobs, soybean meal, urea, minerals, and signal-grass (Brachiaria decumbens) hay, with a concentrate: roughage ratio of 50: 50 and 13% of crude protein on a dry matter basis. To estimate changes in body composition inside the range of weights included in the trial, linear regression equations of log protein (kg), fat (kg) and energy (Mcal) as a function of log empty-body-weight (EBW), in kg, were fitted. Energy requirements for maintenance were obtained as estimated heat production at zero level of energy intake. Buffaloes submitted to fattening in feedlot presented early body fat deposition, and had with the same live weight lower protein content and higher fat content and energy per unit weight than european-zebu crossbred cattle.

The Role of Implant/Abutment System on Torque Maintenance of Retention Screws and Vertical Misfit of Implant-Supported Crowns Before and After Mechanical Cycling

Purpose: This study aimed to evaluate the role of the implant/abutment system on torque maintenance of titanium retention screws and the vertical misfit of screw-retained implant-supported crowns before and after mechanical cycling. Materials and Methods: Three groups were studied: morse taper implants with conical abutments (MTC group), external-hexagon implants with conical abutments (EHC group), and external-hexagon implants with UCLA abutments (EHU group). Metallic crowns casted in cobalt-chromium alloy were used (n = 10). Retention screws received insertion torque and, after 3 minutes, initial detorque was measured. Crowns were retightened and submitted to cyclic loading testing under oblique loading (30 degrees) of 130 +/- 10 N at 2 Hz of frequency, totaling 1 x 10(6) cycles. After cycling, final detorque was measured. Vertical misfit was measured using a stereomicroscope. Data were analyzed by analysis of variance, Tukey test, and Pearson correlation test (P < .05). Results: All detorque values were lower than the insertion torque both before and after mechanical cycling. No statistically significant difference was observed among groups before mechanical cycling. After mechanical cycling, a statistically significantly lower loss of detorque was verified in the MTC group in comparison to the EHC group. Significantly lower vertical misfit values were noted after mechanical cycling but there was no difference among groups. There was no significant correlation between detorque values and vertical misfit. Conclusions: All groups presented a significant decrease of torque before and after mechanical cycling. The morse taper connection promoted the highest torque maintenance. Mechanical cycling reduced the vertical misfit of all groups, although no significant correlation between vertical misfit and torque loss was found.

Longitudinal patterns of fish assemblages in mountain streams from tropical forest biome

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The influence of habitat homogenization on the trophic structure of fish fauna in tropical streams

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Predictive maintenance of a worm reducer with an unbalanced load

Among all predictive maintenance techniques the oil analysis and vibration analysis are the most important for monitoring some mechanical systems. The integration of these techniques has potential to improve industrial maintenance practices and provide a better economic gain for industries. To study the integration of these two techniques, a test rig was set up to obtain an extreme working condition for the worm reducer used in this paper. The test rig was composed by a motor connected to a reducer through a flexible coupling and with an unbalanced load. The analysis of the results carried out by using a sample of the oil recommended by the manufacturer in extreme conditions, and using liquid contaminant is presented. From the results it was observed that if there is an abnormal instantaneous load in a system, the subsequent vibration analysis may not perceive what occurred if there was no permanent damage, which is not the case with the lubricant analysis.

Mineral requirements for growth and maintenance of F-1 Boer x Saanen male kids

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The effects of temperature and busulfan (Myleran) on the yellowtail tetra Astyanax altiparanae (Pisces, Characiformes) spermatogenesis

We aimed to standardize a protocol to suppress spermatogenesis in the characiform fish, Astyanax altiparanae, for future use as a host in germ cell transplant research, opening opportunities for a range of studies, such as spermatogenesis analyses and transgenesis because this species presents livestock characteristics to be used as a biological model. The effects of the chemotherapeutic busulfan (formulated as Myleran), which is used as medicine, therefore not as toxic to humans manipulation as analytical grade busulfan (Fluka) used in previous studies, were evaluated at physiological temperature of 28 °C, ideal for growth and reproduction of A altiparanae, and also at increased temperature 35 °C. The temperature groups were divided into three treatment groups: busulfan, DMSO only, and an untreated control. Macroscopic, histologic, stereological, and ultrastructure analysis showed that, at 28 °C, busulfan did not cause depletion of germ cells in A altiparanae. However, at 35 °C, sterilization was observed 3 weeks after the initial application. Similar results were obtained with maintenance of fish at 35 °C for a longer period with no accompanying Myleran treatment. This procedure allows reduction in stress and lower mortality resulting from manipulation during busulfan injection and is also suitable for mass treatment because large numbers of fish can be incubated in warm water.

SPATIAL AND TEMPORAL DISTRIBUTION OF FISH IN PALMAS BAY, UBATUBA, BRAZIL

The aim of this study was to analyze the distribution and abundance of the fish fauna of Palmas bay on Anchieta Island in southeastern Brazil. Specimens were caught in the summer and winter of 1992, using an otter trawl at three locations in the bay. The specimens were caught in both the nighttime and daytime. Data on the water temperature and salinity were recorded for the characterization of the predominant water mass in the region, and sediment samples were taken for granulometric analysis. A total of 7 656 specimens (79 species), with a total weight of approximately 300 kg, were recorded. The most abundant species were Eucinostomus argenteus, Ctenosciaena gracilicirrhus, Haemulon steindachneri, Eucinostomus gula and Diapterus rhombeus, which together accounted for more than 73% of the sample. In general, the ecological indices showed no differences in the composition of species for the abiotic variables analyzed. The multivariate analysis showed that the variations in the distribution of the fish fauna were mainly associated with intra-annual differences in temperature and salinity, resulting from the presence of South Atlantic Central Water (SACW) in the area during the summer. The analysis also showed an association with the type of bottom and a lesser association with respect to the night/day periods.

Mutagenicity of Blue Rayon Extracts of Fish Bile as a Biomarker in a Field Study

Blue rayon (BR) in combination with the Salmonella/microsome assay was used to evaluate the mutagenicity of fish bile samples. Specimens of Mugil curema from two sites were collected over a 1-year period. Piacaguera channel contains high concentrations of total polycyclic aromatic hydrocarbons (PAHs) and other contaminants, while Bertioga channel was considered the reference sites in this study. Bile was extracted with BR and tested with TA98, TA100, and YG1041 strains with and without S9 in dose response experiments. PAH metabolite equivalents were analyzed using reverse-phase high performance liquid chromatography /fluorescence. Higher mutagenic responses were observed for the contaminated site; YG1041 with S9 was the most sensitive strain/condition. Mutagenicity ranged from 3,900 to 14,000 rev./mg at the contaminated site and from 1,200 to 2,500 rev./mg of BR at the reference site. The responses of YG1041 were much higher in comparison with the TA98 indicating the presence of polycyclic compounds from the aromatic amine class that cause frameshift mutation. TA100 showed a positive mutagenic response that was enhanced following S9 treatment at both sites suggesting the presence of polycyclic compounds that require metabolic activation. benzo(a)pyrene, naphthalene, and phenanthrene metabolite equivalents were also higher in the bile of fish collected at the contaminated site. It was not possible to correlate the PAH metabolite quantities with the mutagenic potency. Thus, a combination of the Salmonella/microsome assay with YG1041 with S9 from BR bile extract seems to be an acceptable biomarker for monitoring the exposure of fish to mutagenic polycyclic compounds. Environ. Mal. Mutagen. 51:173-179, 2010. (C) 2009 Wiley-Liss, Inc.

Effect of the inclusion of fish residue oils in diets on the fatty acid profile of muscles of males and females lambari (Astyanax altiparanae)

This study evaluated the effects of two lipids sources of fish residue (tilapia and salmon) compared with a vegetable oil source (soybean oil) on the fatty acid profiles of male and female lambari. This experiment was developed in a completely randomized experimental design in a 3 x 2 factorial arrangement, totaling 6 treatments resulting from the combination of the three experimental diets for both sexes, with four replications for each treatment. This study involved 120 male (2.58 +/- 0.13 g) and 72 female lambari (4.00 +/- 0.09 g), fed the experimental diets twice a day until apparent satiation for a period of 60 days. Oleic, linoleic, palmitic and stearic fatty acids were found at higher concentrations in all experimental oils and diets, as well in the muscle of male and female lambari. The low amounts of arachidonic, eicosapentaenoic and docosahexaenoic acids in the experimental diets and subsequent greater concentrations in muscle tissue, suggested that lambari are able to desaturate and elongate the chain of fatty acids with 18 carbons. The fish of both sexes that received the diet with soybean oil showed high levels of n-6 fatty acids, especially of C18: 2n-6 and low levels of eicosapentaenoic and docosahexaenoic acids. The diet with salmon residue oil promoted higher levels of fatty acids of the n-3 series and resulted in the best n-3/n-6 ratio in the muscle of male and female lambari. The oils from fish residues can be a substitute for traditional fish oil and its use in the lambari diets does not impair its growth.

The Influence of Environmental Temperature and Air Humidity on the Maintenance of Sterility of Surgical Instruments Sterilized in Different Wraps

State of Sao Paulo Research Foundation (FAPESP), Brazil

Improvement in ARDS experimental model installation: Low mortality rate and maintenance of hemodynamic stability

Introduction: Many experimental models using lung lavage have been developed for the study of acute respiratory distress syndrome (ARDS). The original technique has been modified by many authors, resulting in difficulties with reproducibility. There is insufficient detail on the lung injury models used, including hemodynamic stability during animal preparation and drawbacks encountered such as mortality. The authors studied the effects of the pulmonary recruitment and the use of fixed tidal volume (Vt) or fixed inspiratory pressure in the experimental ARDS model installation. Methods: Adult rabbits were submitted to repeated lung lavages with 30 ml/kg warm saline until the ARDS definition (PaO2/FiO(2) <= 100) was reached. The animals were divided into three groups, according to the technique used for mechanical ventilation: 1) fixed Vt of 10 ml/kg; 2) fixed inspiratory pressure (IP) with a tidal volume of 10 ml/kg prior to the first lung lavage; and 3) fixed Vt of 10 ml/kg with pulmonary recruitment before the first lavage. Results: The use of alveolar recruitment maneuvers, and the use of a fixed Vt or IP between the lung lavages did not change the number of lung lavages necessary to obtain the experimental model of ARDS or the hemodynamic stability of the animals during the procedure. A trend was observed toward an increased mortality rate with the recruitment maneuver and with the use of a fixed IP. Discussion: There were no differences between the three study groups, with no disadvantage in method of lung recruitment, either fixed tidal volume or fixed inspiratory pressure, regarding the number of lung lavages necessary to obtain the ARDS animal model. Furthermore, the three different procedures resulted in good hemodynamic stability of the animals, and low mortality rate. (C) 2012 Elsevier Inc. All rights reserved.