Genetic analysis of c-Myc in mouse bone marrow and liver

1. Summary The transcription factor and proto-oncogene c-myc plays an important role in integrating many mitogenic signals within the cell. The consequences are both broad and varied and include the regulation of apoptosis, cellular differentiation, cellular growth and cell cycle progression. It is found to be mis-regulated in over 70% of all cancers, however, our knowledge about c-Myc remains limited and very little is known about its physiological role in mammalian development and in adulthood. We have addressed the physiological role of c-Myc in both the bone marrow and the liver of mice by generating adult c-myc flox/flox mice that lacked c-myc in either the bone marrow or the liver after conversion of the c-myc flox alleles into null alleles by the inducible Mx¬Cre transgene with polyI-polyC. In investigating the role of c-Myc in the haematopoietic system, we concentrated on the aspects of cellular proliferation, cellular differentiation and apoptosis. Mice lacking c-Myc develop anaemia between 3-8 weeks and all more differentiated cell types are severely depleted leading to death. However in addition to its role in driving proliferation in transient amplifying cells, we unexpectedly discovered a new role for c-Myc in controlling haematopoietic stem cell (HSC) differentiation. c-Myc deficient HSCs are able to proliferate normally in vivo. In addition, their differentiation into more committed progenitors is blocked. These cells expressed increased adhesion molecules, which possibly prevent HSCs from being released from the special stem cell supporting stromal niche cells with which they closely associate. Secondly we used the liver as a model system to address the role of c-Myc in cellular growth, meaning the increase in cell size, and also cellular proliferation. Our results revealed c-Myc to play no role in metabolic cellular growth following a period of fasting. Following treatment with the xenobiotic TCPOBOP, c-Myc deficient hepatocytes increased in cell size as control hepatocytes and could surprisingly proliferate albeit at a reduced rate demonstrating a c-Myc independent proliferation pathway to exist in parenchymal cells. However, following partial hepatectomy, in which two-thirds of the liver was removed, mutant livers were severely restricted in their regeneration capacity compared to control livers demonstrating that c-Myc is essential for liver regeneration. Résumé Le facteur de transcription et proto-oncogène c-myc joue un rôle important dans l'intégration de nombreux signaux mitogéniques dans la cellule. Les conséquences de son activation sont étendues et variées et incluent la régulation de l'apoptose, de la différenciation, de la croissance et de la progression du cycle cellulaire. Même si plus de 20% des cancers montrent une dérégulation de c-myc, les connaissances sur ce facteur de transcription restent limitées et ses rôles physiologiques au cours du développement et chez l'adulte sont très peu connus. Nous avons étudié le rôle physiologique de c-Myc dans la molle osseuse et le foie murin en générant des souris adultes c-myc flox/flox. Dans ces souris, les allèles c-myc flox sont convertis en allèles nuls par le transgène Mx-Cre après induction avec du Poly-I.C. Pour notre étude du rôle de c-Myc dans le système hématopoiétique, nous nous sommes concentrés sur les aspects de la prolifération et de la différenciation cellulaire, ainsi que sur l'apoptose. Les souris déficientes pour c-Myc développent une anémie 3 à 8 semaines après la délétion du gène; tous les différents types cellulaires matures sont progressivement épuisés ce qui entraîne la mort des animaux. Néanmoins, outre sa capacité à induire la prolifération des cellules transitoires de la molle osseuse, nous avons inopinément découvert un nouveau rôle pour c-Myc dans le contrôle de la différenciation des cellules souches hématopoiétiques (HSC). Les HSC déficientes pour c-Myc prolifèrent normalement in vivo mais leur différenciation en progéniteurs plus engagés dans une voie de différenciation est bloquée. Ces cellules surexpriment certaines molécules d'adhésion ce qui empêcherait les HSC d'être relachées du stroma spécialisé, ou niche, auquel elles sont étroitement associées. D'autre part, nous avons utilisé le foie comme système modèle pour étudier le rôle de c-Myc dans la prolifération et dans la croissance cellulaire, c'est à dire l'augmentation de taille des cellules. Nos résultats ont révélé que c-Myc ne joue pas de rôle dans le métabolisme cellulaire qui suit une période de jeûne. L'augmentation de la taille cellulaire des hépatocytes déficients pour c-Myc suite au traitement avec l'agent xénobiotique TCPOBOP est identique à celle observée pour les cellules de contrôle. Le taux de prolifération des hépatocytes mutants est par contre réduit, indiquant qu'une voie de différenciation indépendante de c-Myc existe dans les cellules parenchymales. Néanmoins, après hépatectomie partielle, où deux-tiers du foie sont éliminés chirurgicalement, les foies mutants sont sévèrement limités dans leur capacité de régénération par rapport aux foies de contrôle, montrant ainsi que c-Myc est essentiel pour la régénération hépatique.

Analysis of c-Myc function in mouse epidermis

Abstract The c-myc gene is one of the most frequently mutated oncogenes found in human tumors. c-Myc has been implicated in the regulation of various biological processes including cell cycle progression, cellular growth, differentiation, angiogenesis, immortalization and apoptosis. To assess the normal role of c-Myc in epithelial cell types in vitro and in vivo we have deleted the c-myc gene in keratinocytes and in the adult skin epidermis by conditional Cre/loxP mediated recombination. Similar to what we have previously shown in mouse embryonic fibroblasts acute elimination of c-Myc activity in cultured keratinocytes causes cells to cease proliferation and adapt a flat cell morphology. Mutant cells accumulate in a diploid Ki67neg stage, indicative of a quiescent Go stage. This demonstrates that c-Myc activity is essential to maintain keratinocytes in a productive cell cycle. In addition, mutant keratinocytes showed a defect in Ca2+ induced induction of the differentiation marker Keratin 1 suggesting a role for c-Myc during differentiation. To assess the in vivo role of c-Myc we used a tamoxifen inducible K5::CreERT transgene to delete the c-myc gene in the adult skin epidermis. Unexpectedly, despite strong c-Myc expression in the basal compartment it is not required for maintenance of the skin epidermis in the adult mouse. The epidermis appeared normal with respect to both proliferation and differentiation. In addition, no selection against c-Myc deficient epidermal cells occurred over many months, further confirming that c-Myc is dispensable for normal skin homeostasis. Even more surprising, TPA induced hyperproliferation also occurred in a c-Myc independent manner. Treatment of the skin with the mutagen DMBA prior to TPA is a classical way to induce papillomas by selecting for mutations that lead to dominant activation of the oncogene Ha-Ras. Most interestingly tumor formation was severely inhibited suggesting that tumor progression requires endogenous c-Myc. Further studies are required to address whether the role of c-Myc in the activation of telomerase or the Werner protein, or its role to induce angiogenesis is required for skin tumor progression, In conclusion, this work shows that while c-Myc is not required for maintenance or hyperplasia of mouse epidermis, it is essential for skin tumor progression in collaboration with Ras. Résumé Le gène c-myc est un des oncogènes les plus fréquemment mutés dans les tumeurs humaines. c-Myc est impliqué dans la régulation de processus biologiques variés, comme la progression du cycle cellulaire, la croissance cellulaire, la différenciation, l'angiogenèse, l'immortalisation et l'apoptose. Pour caractériser le rôle physiologique de c-Myc dans les cellules de type épithélial in vitro et in vivo, le gène c-myc a été délété dans des kératinocytes primaires et dans l'épiderme de peau de souris adultes par des recombinaisons conditionnelles (système Cre/loxP). De la même façon que dans les fibroblastes d'embryon de souris, l'élimination aiguë de l'activité de c-Myc dans les kératinocytes en culture primaire provoque l'arrêt de la prolifération des cellules et leur applatissement morphologique. Les cellules mutantes restent dans un stade diploïde Ki67neg, indiquant un stade quiescent Go. Cela démontre que l'activité de c-Myc est essentielle pour maintenir les kératinocytes dans le cycle cellulaire. De plus, les kératinocytes mutants montrent une déficience pour le marqueur de différenciation Kératine 1 au cours de la différenciation induite par le calcium, suggérant un rôle de c-Myc dans la différenciation cellulaire. Pour comprendre le rôle de c-Myc in vivo, le transgène K5::CreERT inductible par le tamoxifen a été utilisé pour déléter le gène c-inyc dans l'épiderme de souris adultes. Etonnemment, malgré une forte expression de c-Myc dans le compartiment basal de l'épiderme, ce gène n'est pas nécessaire pour la maintenance de l'épiderme de la peau chez la souris adulte. L'épiderme apparait normal avec une prolifération et une différenciation physiologique des cellules. De plus, il n'y a pas de sélection contre les cellules épidennales c-Myc déficientes après plusieurs mois, ce qui confirme que c-Myc n'est pas nécessaire pour l'homéostasie normale de la peau. Encore plus surprenant, une hyperprolifération est également induite par du TPA chez les souris mutantes, impliquant une voie de prolifération indépendante de c-Myc. Le traitement de la peau par le mutagène DMBA avant le traitement au TPA est une voie classique d'induction de papillomes, par sélection de mutations conduisant à l'activation de l'oncogène Ha-Ras. La formation des tumeurs est fortement inhibée chez les souris mutantes, suggérant que la progression des tumeurs nécessite la présence endogène de c-Myc. De nouvelles études sont nécessaires pour savoir si c-Myc a un rôle dans l'activation de la télomérase ou de la protéine de Werner, ou encore dans l'angiogénèse, qui sont nécessaires pour la progression tumorale. En conclusion, ce travail montre que même si c-Myc n'est pas nécessaire pour la maintenance ou l'hyperplasie de la peau de souris, il est essentiel pour la progression des tumeurs de la peau en collaboration avec Ras.

Integrating human indoor air pollutant exposure within Life Cycle Impact Assessment.

Neglecting health effects from indoor pollutant emissions and exposure, as currently done in Life Cycle Assessment (LCA), may result in product or process optimizations at the expense of workers' or consumers' health. To close this gap, methods for considering indoor exposure to chemicals are needed to complement the methods for outdoor human exposure assessment already in use. This paper summarizes the work of an international expert group on the integration of human indoor and outdoor exposure in LCA, within the UNEP/ SETAC Life Cycle Initiative. A new methodological framework is proposed for a general procedure to include human-health effects from indoor exposure in LCA. Exposure models from occupational hygiene and household indoor air quality studies and practices are critically reviewed and recommendations are provided on the appropriateness of various model alternatives in the context of LCA. A single-compartment box model is recommended for use as a default in LCA, enabling one to screen occupational and household exposures consistent with the existing models to assess outdoor emission in a multimedia environment. An initial set of model parameter values was collected. The comparison between indoor and outdoor human exposure per unit of emission shows that for many pollutants, intake per unit of indoor emission may be several orders of magnitude higher than for outdoor emissions. It is concluded that indoor exposure should be routinely addressed within LCA.

ACTG-HIV symptoms changes in patients switched to RPV/FTC/TDF due to previous intolerance to CART. Interim analysis of the PRO-STR study.

INTRODUCTION Tolerability and convenience are crucial aspects for the long-term success of combined antiretroviral therapy (cART). The aim of this study was to investigate the impact in routine clinical practice of switching to the single tablet regimen (STR) RPV/FTC/TDF in patients with intolerance to previous cART, in terms of patients' well-being, assessed by several validated measures. METHODS Prospective, multicenter study. Adult HIV-infected patients with viral load under 1.000 copies/mL while receiving a stable ART for at least the last three months and switched to RPV/FTC/TDF due to intolerance of previous regimen, were included. Analyses were performed by ITT. Presence/magnitude of symptoms (ACTG-HIV Symptom Index), quality of life (EQ-5D, EUROQoL & MOS-HIV), adherence (SMAQ), preference of treatment and perceived ease of medication (ESTAR) through 48 weeks were performed. RESULTS Interim analysis of 125 patients with 16 weeks of follow up was performed. 100 (80%) were male, mean age 46 years. Mean CD4 at baseline was 629.5±307.29 and 123 (98.4%) had viral load <50 copies/mL; 15% were HCV co-infected. Ninety two (73.6%) patients switched from a NNRTI (84.8% from EFV/FTC/TDF) and 33 (26.4%) from a PI/r. The most frequent reasons for switching were psychiatric disorders (51.2%), CNS adverse events (40.8%), gastrointestinal (19.2%) and metabolic disorders (19.2%). At the time of this analysis (week 16), four patients (3.2%) discontinued treatment: one due to adverse events, two virologic failures and one with no data. A total of 104 patients (83.2%) were virologically suppressed (<50 copies/mL). The average degree of discomfort in the ACTG-HIV Symptom Index significantly decreased from baseline (21±15.55) to week 4 (10.89±12.36) & week 16 (10.81±12.62), p<0.001. In all the patients, quality of life tools showed a significant benefit in well-being of the patients (Table 1). Adherence to therapy significantly and progressively increased (SMAQ) from baseline (54.4%) to week 4 (68%), p<0.001 and to week 16 (72.0%), p<0.001. CONCLUSIONS Switching to RPV/FTC/TDF from another ARV regimen due to toxicity, significantly improved the quality of life of HIV-infected patients, both in mental and physical components, and improved adherence to therapy while maintaining a good immune and virological response.

Lipid changes in HIV-patients switching to the coformulated single tablet FTC/RPV/TDF (Eviplera®). Efficacy and safety analysis. GeSida Study 8114.

INTRODUCTION Rilpivirine (RPV) has a better lipid profile than efavirenz (EFV) in naïve patients (1). Switching to RPV may be convenient for many patients, while maintaining a good immunovirological control (2). The aim of this study was to analyze lipid changes in HIV-patients at 24 weeks after switching to Eviplera® (emtricitabine/RPV/tenofovir disoproxil fumarate [FTC/RPV/TDF]). MATERIALS AND METHODS Retrospective, multicentre study of a cohort of asymptomatic HIV-patients who switched from a regimen based on 2 nucleoside reverse transcriptase inhibitors (NRTI)+protease inhibitor (PI)/non nucleoside reverse transcriptase inhibitor (NNRTI) or ritonavir boosted PI monotherapy to Eviplera® during February-December, 2013; all had undetectable HIV viral load for ≥3 months prior to switching. Patients with previous failures on antiretroviral therapy (ART) including TDF and/or FTC/3TC, with genotype tests showing resistance to components of Eviplera®, or who had changed the third drug of the ART during the study period were excluded. Changes in lipid profile and cardiovascular risk (CVR), and efficacy and safety at 24 weeks were analyzed. RESULTS Among 305 patients included in the study, 298 were analyzed (7 cases were excluded due to lack of data). Men 81.2%, mean age 44.5 years, 75.8% of HIV sexually transmitted. 233 (78.2%) patients switched from a regimen based on 2 NRTI+NNRTI (90.5% EFV/FTC/TDF). The most frequent reasons for switching were central nervous system (CNS) adverse events (31.0%), convenience (27.6%) and metabolic disorders (23.2%). At this time, 293 patients have reached 24 weeks: 281 (95.9%) have continued Eviplera®, 6 stopped it (3 adverse events, 2 virologic failures, 1 discontinuation) and 6 have been lost to follow up. Lipid profiles of 283 cases were available at 24 weeks and mean (mg/dL) baseline vs 24 weeks are: total cholesterol (193 vs 169; p=0.0001), HDL-c (49 vs 45; p=0.0001), LDL-c (114 vs 103; p=0.001), tryglycerides (158 vs 115; p=0.0001), total cholesterol to HDL-c ratio (4.2 vs 4.1; p=0.3). CVR decreased (8.7 vs 7.5%; p= 0.0001). CD4 counts were similar to baseline (653 vs 674 cells/µL; p=0.08), and 274 (96.8%) patients maintained viral suppression. CONCLUSIONS At 24 weeks after switching to Eviplera®, lipid profile and CVR improved while maintaining a good immunovirological control. Most subjects switched to Eviplera® from a regimen based on NNRTI, mainly EFV/FTC/TDF. CNS adverse events, convenience and metabolic disorders were the most frequent reasons for switching.

Robust synchronization of coupled circadian and cell cycle oscillators in single mammalian cells.

Circadian cycles and cell cycles are two fundamental periodic processes with a period in the range of 1 day. Consequently, coupling between such cycles can lead to synchronization. Here, we estimated the mutual interactions between the two oscillators by time-lapse imaging of single mammalian NIH3T3 fibroblasts during several days. The analysis of thousands of circadian cycles in dividing cells clearly indicated that both oscillators tick in a 1:1 mode-locked state, with cell divisions occurring tightly 5 h before the peak in circadian Rev-Erbα-YFP reporter expression. In principle, such synchrony may be caused by either unidirectional or bidirectional coupling. While gating of cell division by the circadian cycle has been most studied, our data combined with stochastic modeling unambiguously show that the reverse coupling is predominant in NIH3T3 cells. Moreover, temperature, genetic, and pharmacological perturbations showed that the two interacting cellular oscillators adopt a synchronized state that is highly robust over a wide range of parameters. These findings have implications for circadian function in proliferative tissues, including epidermis, immune cells, and cancer.

Functional analysis of a conserved DNA methyltransferase in caulobacter crescentus

CcrM is a DNA methyltransferase that methylates the adenine in GANTC motifs in the chromo-some of the bacterial model Caulobacter crescentus. The loss of the CcrM homolog is lethal in C. crescentus and in several other species of Alphaproteobacteria. In this research, we used different experimental and bioinformatic approaches to determine why CcrM is so critical to the physiology of C. crescentus. We first showed that CcrM is a resident orphan DNA methyltransferase in non-Rickettsiales Alphaproteobacteria and that its gene is strictly conserved in this clade (with only one ex¬ception among the genomes sequenced so far). In C. crescentus, cells depleted in CcrM in rich medium quickly lose viability and present an elongated phenotype characteristic of an im¬pairment in cell division. Using minimal medium instead of rich medium as selective and main¬tenance substrate, we could generate a AccrM mutant that presents a viability comparable to the wild type strain and only mild morphological defects. On the basis of a transcriptomic ap¬proach, we determined that several genes essential for cell division were downregulated in the AccrM strain in minimal medium. We offered decisive arguments to support that the efficient transcription of two of these genes, ftsZ and mipZ, coding respectively for the Z-ring forming GTPase FtsZ and an inhibitor of FtsZ polymerization needed for the correct positioning of the Z- ring at mid-cell, requires the methylation of an adenine in a conserved GANTC motif located in their core promoter region. We propose a model, according to which the genome of C. crescentus encodes a transcriptional activator that requires a methylated adenine in a GANTC context to bind to DNA and suggest that this transcriptional regulator might be the global cell-cycle regulator GcrA. In addition, combining a classic genetic approach and in vitro evolution experiments, we showed that the mortality and cell division defects of the AccrM strain in rich medium are mainly due to limiting intracellular levels of the FtsZ protein. We also studied the dynamics of GANTC methylation in C. crescentus using the SMRT technol¬ogy developed by Pacific Biosciences. Our findings support the commonly accepted model, accord¬ing to which the methylation state of GANTC motifs varies during the cell cycle of C. crescentus: before the initiation of DNA replication, the GANTC motifs are fully-methylated (methylated on both strands); when the DNA gets replicated, the GANTC motifs become hemi-methylated (methyl¬ated on one strand only) and this occurs at different times during replication for different loci along the chromosome depending on their position relative to the origin of replication; the GANTC mo¬tifs are only remethylated after DNA replication has finished as a consequence of the massive and short-lived expression of CcrM in predivisional cells. About 30 GANTC motifs in the C. crescentus chromosome were found to be undermethylated in most of the bacterial population; these might be protected from CcrM activity by DNA binding proteins and some of them could be involved in methylation-based bistable transcriptional switches. - CcrM est une ADN méthyltransférase qui méthyle les adénines dans le contexte GANTC dans le génome de la bactérie modèle Caulobacter crescentus. La perte de l'homologue de CcrM chez C. crescentus et chez plusieurs autres espèces d'Alphaproteobactéries est létale. Dans le courant de cette recherche, nous tentons de déterminer pourquoi la protéine CcrM est cruciale pour la survie de C. crescentus. Nous démontrons d'abord que CcrM est une adénine méthyltransférase orpheline résidente, dont le gène fait partie du génome minimal partagé par les Alphaprotéobactéries non-Rickettsiales (à une exception près). Lorsqu'une souche de C. crescentus est privée de CcrM, sa viabilité décroît rapi¬dement et ses cellules présentent une morphologie allongée qui suggère que la division cellulaire est inhibée. Nous sommes parvenus à créer une souche AccrM en utilisant un milieu minimum, au lieu du milieu riche classiquement employé, comme milieu de sélection et de maintenance pour la souche. Lorsque nous avons étudié le transcriptome de cette souche de C. crescentus privée de CcrM, nous avons pu constater que plusieurs gènes essentiels pour le bon déroulement de la division cellulaire bactérienne étaient réprimés. En particulier, l'expression adéquate des gènes ftsZ et mipZ - qui codent, respectivement, pour FtsZ, la protéine qui constitue, au milieu de la cellule, un anneau protéique qui initie le processus de division et pour MipZ, un inhibiteur de la polymérisation de FtsZ qui est indispensable pour le bon positionnement de l'anneau FtsZ - est dépendante de la présence d'une adénine méthylée dans un motif GANTC conservé situé dans leur région promotrice. Nous présentons un modèle selon lequel le génome de C. crescentus code pour un facteur de transcription qui exige la présence d'une adénine méthylée dans un contexte GANTC pour s'attacher à l'ADN et nous suggérons qu'il pourrait s'agir du régulateur global du cycle cellulaire GcrA. En outre, nous montrons, en combinant la génétique classique et une approche basée sur l'évolution expérimentale, que la mortalité et l'inhibition de la division cellulaire caractéristiques de la souche àccrMeη milieu riche sont dues à des niveaux excessivement bas de protéine FtsZ. Nous avons aussi étudié la dynamique de la méthylation du chromosome de C. crescentus sur la base de la technologie SMRT développée par Pacific Biosciences. Nous confirmons le modèle communément accepté, qui affirme que l'état de méthylation des motifs GANTC change durant le cycle cellulaire de C. crescentus: les motifs GANTC sont complètement méthylés (méthylés sur les deux brins) avant de début de la réplication de l'ADN; ils deviennent hémi-méthylés (méthylés sur un brin seulement) une fois répliqués, ce qui arrive à différents moments durant la réplication pour différents sites le long du chromosome en fonction de leur position par rapport à l'origine de répli-cation; finalement, les motifs GANTC sont reméthylés après la fin de la réplication du chromosome lorsque la protéine CcrM est massivement, mais très transitoirement, produite. Par ailleurs, nous identifions dans le chromosome de C. crescentus environ 30 motifs GANTC qui restent en perma-nence non-méthylés dans une grande partie de la population bactérienne; ces motifs sont probable-ment protégés de l'action de CcrM par des protéines qui s'attachent à l'ADN et certains d'entre eux pourraient être impliqués dans des mécanismes de régulation générant une transcription bistable.

A 2D/3D image analysis system to track fluorescently labeled structures in rod-shaped cells: application to measure spindle pole asymmetry during mitosis.

BACKGROUND: The yeast Schizosaccharomyces pombe is frequently used as a model for studying the cell cycle. The cells are rod-shaped and divide by medial fission. The process of cell division, or cytokinesis, is controlled by a network of signaling proteins called the Septation Initiation Network (SIN); SIN proteins associate with the SPBs during nuclear division (mitosis). Some SIN proteins associate with both SPBs early in mitosis, and then display strongly asymmetric signal intensity at the SPBs in late mitosis, just before cytokinesis. This asymmetry is thought to be important for correct regulation of SIN signaling, and coordination of cytokinesis and mitosis. In order to study the dynamics of organelles or large protein complexes such as the spindle pole body (SPB), which have been labeled with a fluorescent protein tag in living cells, a number of the image analysis problems must be solved; the cell outline must be detected automatically, and the position and signal intensity associated with the structures of interest within the cell must be determined. RESULTS: We present a new 2D and 3D image analysis system that permits versatile and robust analysis of motile, fluorescently labeled structures in rod-shaped cells. We have designed an image analysis system that we have implemented as a user-friendly software package allowing the fast and robust image-analysis of large numbers of rod-shaped cells. We have developed new robust algorithms, which we combined with existing methodologies to facilitate fast and accurate analysis. Our software permits the detection and segmentation of rod-shaped cells in either static or dynamic (i.e. time lapse) multi-channel images. It enables tracking of two structures (for example SPBs) in two different image channels. For 2D or 3D static images, the locations of the structures are identified, and then intensity values are extracted together with several quantitative parameters, such as length, width, cell orientation, background fluorescence and the distance between the structures of interest. Furthermore, two kinds of kymographs of the tracked structures can be established, one representing the migration with respect to their relative position, the other representing their individual trajectories inside the cell. This software package, called "RodCellJ", allowed us to analyze a large number of S. pombe cells to understand the rules that govern SIN protein asymmetry. CONCLUSIONS: "RodCell" is freely available to the community as a package of several ImageJ plugins to simultaneously analyze the behavior of a large number of rod-shaped cells in an extensive manner. The integration of different image-processing techniques in a single package, as well as the development of novel algorithms does not only allow to speed up the analysis with respect to the usage of existing tools, but also accounts for higher accuracy. Its utility was demonstrated on both 2D and 3D static and dynamic images to study the septation initiation network of the yeast Schizosaccharomyces pombe. More generally, it can be used in any kind of biological context where fluorescent-protein labeled structures need to be analyzed in rod-shaped cells. AVAILABILITY: RodCellJ is freely available under http://bigwww.epfl.ch/algorithms.html, (after acceptance of the publication).

Targeted Gene Deletion and In Vivo Analysis of Putative Virulence Gene Function in the Pathogenic Dermatophyte Arthroderma benhamiae.

Dermatophytes cause the majority of superficial mycoses in humans and animals. However, little is known about the pathogenicity of this specialized group of filamentous fungi, for which molecular research has been limited thus far. During experimental infection of guinea pigs by the human pathogenic dermatophyte Arthroderma benhamiae, we recently detected the activation of the fungal gene encoding malate synthase AcuE, a key enzyme of the glyoxylate cycle. By the establishment of the first genetic system for A. benhamiae, specific ΔacuE mutants were constructed in a wild-type strain and, in addition, in a derivative in which we inactivated the nonhomologous end-joining pathway by deletion of the A. benhamiae KU70 gene. The absence of AbenKU70 resulted in an increased frequency of the targeted insertion of linear DNA by homologous recombination, without notably altering the monitored in vitro growth abilities of the fungus or its virulence in a guinea pig infection model. Phenotypic analyses of ΔacuE mutants and complemented strains depicted that malate synthase is required for the growth of A. benhamiae on lipids, major constituents of the skin. However, mutant analysis did not reveal a pathogenic role of the A. benhamiae enzyme in guinea pig dermatophytosis or during epidermal invasion of the fungus in an in vitro model of reconstituted human epidermis. The presented efficient system for targeted genetic manipulation in A. benhamiae, paired with the analyzed infection models, will advance the functional characterization of putative virulence determinants in medically important dermatophytes.

Bilinear models for spatio-temporal point distribution analysis: application to extrapolation of left ventricular, biventricular and whole heart cardiac dynamics

In this work we describe the usage of bilinear statistical models as a means of factoring the shape variability into two components attributed to inter-subject variation and to the intrinsic dynamics of the human heart. We show that it is feasible to reconstruct the shape of the heart at discrete points in the cardiac cycle. Provided we are given a small number of shape instances representing the same heart atdifferent points in the same cycle, we can use the bilinearmodel to establish this. Using a temporal and a spatial alignment step in the preprocessing of the shapes, around half of the reconstruction errors were on the order of the axial image resolution of 2 mm, and over 90% was within 3.5 mm. From this, weconclude that the dynamics were indeed separated from theinter-subject variability in our dataset.

Morphodynamic analysis of cerebral aneurysm pulsation from time-resolved rotational angiography

This paper presents a technique to estimate and model patient-specific pulsatility of cerebral aneurysms over onecardiac cycle, using 3D rotational X-ray angiography (3DRA) acquisitions. Aneurysm pulsation is modeled as a time varying-spline tensor field representing the deformation applied to a reference volume image, thus producing the instantaneousmorphology at each time point in the cardiac cycle. The estimated deformation is obtained by matching multiple simulated projections of the deforming volume to their corresponding original projections. A weighting scheme is introduced to account for the relevance of each original projection for the selected time point. The wide coverage of the projections, together with the weighting scheme, ensures motion consistency in all directions. The technique has been tested on digital and physical phantoms that are realistic and clinically relevant in terms of geometry, pulsation and imaging conditions. Results from digital phantomexperiments demonstrate that the proposed technique is able to recover subvoxel pulsation with an error lower than 10% of the maximum pulsation in most cases. The experiments with the physical phantom allowed demonstrating the feasibility of pulsation estimation as well as identifying different pulsation regions under clinical conditions.

Life-Cycle Effects on Household Expenditures: A Latent-Variable Approach

Using data from the Spanish household budget survey, we investigate life- cycle effects on several product expenditures. A latent-variable model approach is adopted to evaluate the impact of income on expenditures, controlling for the number of members in the family. Two latent factors underlying repeated measures of monetary and non-monetary income are used as explanatory variables in the expenditure regression equations, thus avoiding possible bias associated to the measurement error in income. The proposed methodology also takes care of the case in which product expenditures exhibit a pattern of infrequent purchases. Multiple-group analysis is used to assess the variation of key parameters of the model across various household life-cycle typologies. The analysis discloses significant life-cycle effects on the mean levels of expenditures; it also detects significant life-cycle effects on the way expenditures are affected by income and family size. Asymptotic robust methods are used to account for possible non-normality of the data.

The Ins and Outs of Unemployment: A Conditional Analysis

We analyze how unemployment, job finding and job separation rates react to neutral and investment-specific technology shocks. Neutral shocks increase unemployment and explain a substantial portion of unemployment volatility; investment-specific shocks expand employment and hours worked and mostly contribute to hours worked volatility. Movements in the job separation rates are responsible for the impact response of unemployment while job finding rates for movements along its adjustment path. Our evidence qualifies the conclusions by Hall (2005) and Shimer (2007) and warns against using search models with exogenous separation rates to analyze the effects of technology shocks.

Rules of origin : from analysis to reform

General Introduction This thesis can be divided into two main parts :the first one, corresponding to the first three chapters, studies Rules of Origin (RoOs) in Preferential Trade Agreements (PTAs); the second part -the fourth chapter- is concerned with Anti-Dumping (AD) measures. Despite wide-ranging preferential access granted to developing countries by industrial ones under North-South Trade Agreements -whether reciprocal, like the Europe Agreements (EAs) or NAFTA, or not, such as the GSP, AGOA, or EBA-, it has been claimed that the benefits from improved market access keep falling short of the full potential benefits. RoOs are largely regarded as a primary cause of the under-utilization of improved market access of PTAs. RoOs are the rules that determine the eligibility of goods to preferential treatment. Their economic justification is to prevent trade deflection, i.e. to prevent non-preferred exporters from using the tariff preferences. However, they are complex, cost raising and cumbersome, and can be manipulated by organised special interest groups. As a result, RoOs can restrain trade beyond what it is needed to prevent trade deflection and hence restrict market access in a statistically significant and quantitatively large proportion. Part l In order to further our understanding of the effects of RoOs in PTAs, the first chapter, written with Pr. Olivier Cadot, Celine Carrère and Pr. Jaime de Melo, describes and evaluates the RoOs governing EU and US PTAs. It draws on utilization-rate data for Mexican exports to the US in 2001 and on similar data for ACP exports to the EU in 2002. The paper makes two contributions. First, we construct an R-index of restrictiveness of RoOs along the lines first proposed by Estevadeordal (2000) for NAFTA, modifying it and extending it for the EU's single-list (SL). This synthetic R-index is then used to compare Roos under NAFTA and PANEURO. The two main findings of the chapter are as follows. First, it shows, in the case of PANEURO, that the R-index is useful to summarize how countries are differently affected by the same set of RoOs because of their different export baskets to the EU. Second, it is shown that the Rindex is a relatively reliable statistic in the sense that, subject to caveats, after controlling for the extent of tariff preference at the tariff-line level, it accounts for differences in utilization rates at the tariff line level. Finally, together with utilization rates, the index can be used to estimate total compliance costs of RoOs. The second chapter proposes a reform of preferential Roos with the aim of making them more transparent and less discriminatory. Such a reform would make preferential blocs more "cross-compatible" and would therefore facilitate cumulation. It would also contribute to move regionalism toward more openness and hence to make it more compatible with the multilateral trading system. It focuses on NAFTA, one of the most restrictive FTAs (see Estevadeordal and Suominen 2006), and proposes a way forward that is close in spirit to what the EU Commission is considering for the PANEURO system. In a nutshell, the idea is to replace the current array of RoOs by a single instrument- Maximum Foreign Content (MFC). An MFC is a conceptually clear and transparent instrument, like a tariff. Therefore changing all instruments into an MFC would bring improved transparency pretty much like the "tariffication" of NTBs. The methodology for this exercise is as follows: In step 1, I estimate the relationship between utilization rates, tariff preferences and RoOs. In step 2, I retrieve the estimates and invert the relationship to get a simulated MFC that gives, line by line, the same utilization rate as the old array of Roos. In step 3, I calculate the trade-weighted average of the simulated MFC across all lines to get an overall equivalent of the current system and explore the possibility of setting this unique instrument at a uniform rate across lines. This would have two advantages. First, like a uniform tariff, a uniform MFC would make it difficult for lobbies to manipulate the instrument at the margin. This argument is standard in the political-economy literature and has been used time and again in support of reductions in the variance of tariffs (together with standard welfare considerations). Second, uniformity across lines is the only way to eliminate the indirect source of discrimination alluded to earlier. Only if two countries face uniform RoOs and tariff preference will they face uniform incentives irrespective of their initial export structure. The result of this exercise is striking: the average simulated MFC is 25% of good value, a very low (i.e. restrictive) level, confirming Estevadeordal and Suominen's critical assessment of NAFTA's RoOs. Adopting a uniform MFC would imply a relaxation from the benchmark level for sectors like chemicals or textiles & apparel, and a stiffening for wood products, papers and base metals. Overall, however, the changes are not drastic, suggesting perhaps only moderate resistance to change from special interests. The third chapter of the thesis considers whether Europe Agreements of the EU, with the current sets of RoOs, could be the potential model for future EU-centered PTAs. First, I have studied and coded at the six-digit level of the Harmonised System (HS) .both the old RoOs -used before 1997- and the "Single list" Roos -used since 1997. Second, using a Constant Elasticity Transformation function where CEEC exporters smoothly mix sales between the EU and the rest of the world by comparing producer prices on each market, I have estimated the trade effects of the EU RoOs. The estimates suggest that much of the market access conferred by the EAs -outside sensitive sectors- was undone by the cost-raising effects of RoOs. The chapter also contains an analysis of the evolution of the CEECs' trade with the EU from post-communism to accession. Part II The last chapter of the thesis is concerned with anti-dumping, another trade-policy instrument having the effect of reducing market access. In 1995, the Uruguay Round introduced in the Anti-Dumping Agreement (ADA) a mandatory "sunset-review" clause (Article 11.3 ADA) under which anti-dumping measures should be reviewed no later than five years from their imposition and terminated unless there was a serious risk of resumption of injurious dumping. The last chapter, written with Pr. Olivier Cadot and Pr. Jaime de Melo, uses a new database on Anti-Dumping (AD) measures worldwide to assess whether the sunset-review agreement had any effect. The question we address is whether the WTO Agreement succeeded in imposing the discipline of a five-year cycle on AD measures and, ultimately, in curbing their length. Two methods are used; count data analysis and survival analysis. First, using Poisson and Negative Binomial regressions, the count of AD measures' revocations is regressed on (inter alia) the count of "initiations" lagged five years. The analysis yields a coefficient on measures' initiations lagged five years that is larger and more precisely estimated after the agreement than before, suggesting some effect. However the coefficient estimate is nowhere near the value that would give a one-for-one relationship between initiations and revocations after five years. We also find that (i) if the agreement affected EU AD practices, the effect went the wrong way, the five-year cycle being quantitatively weaker after the agreement than before; (ii) the agreement had no visible effect on the United States except for aone-time peak in 2000, suggesting a mopping-up of old cases. Second, the survival analysis of AD measures around the world suggests a shortening of their expected lifetime after the agreement, and this shortening effect (a downward shift in the survival function postagreement) was larger and more significant for measures targeted at WTO members than for those targeted at non-members (for which WTO disciplines do not bind), suggesting that compliance was de jure. A difference-in-differences Cox regression confirms this diagnosis: controlling for the countries imposing the measures, for the investigated countries and for the products' sector, we find a larger increase in the hazard rate of AD measures covered by the Agreement than for other measures.

Surface deterioration of dental materials after simulated toothbrushing in relation to brushing time and load.

OBJECTIVES: (1) To evaluate the changes in surface roughness and gloss after simulated toothbrushing of 9 composite materials and 2 ceramic materials in relation to brushing time and load in vitro; (2) to assess the relationship between surface gloss and surface roughness. METHODS: Eight flat specimens of composite materials (microfilled: Adoro, Filtek Supreme, Heliomolar; microhybrid: Four Seasons, Tetric EvoCeram; hybrid: Compoglass F, Targis, Tetric Ceram; macrohybrid: Grandio), two ceramic materials (IPS d.SIGN and IPS Empress polished) were fabricated according to the manufacturer's instructions and optimally polished with up to 4000 grit SiC. The specimens were subjected to a toothbrushing (TB) simulation device (Willytec) with rotating movements, toothpaste slurry and at three different loads (100g/250g/350g). At hourly intervals from 1h to 10h TB, mean surface roughness Ra was measured with an optical sensor and the surface gloss (Gl) with a glossmeter. Statistical analysis was performed for log-transformed Ra data applying two-way ANOVA to evaluate the interaction between load and material and load and brushing time. RESULTS: There was a significant interaction between material and load as well as between load and brushing time (p<0.0001). The microhybrid and hybrid materials demonstrated more surface deterioration with higher loads, whereas with the microfilled resins Heliomolar and Adoro it was vice versa. For ceramic materials, no or little deterioration was observed over time and independent of the load. The ceramic materials and 3 of the composite materials (roughness) showed no further deterioration after 5h of toothbrushing. Mean surface gloss was the parameter which discriminated best between the materials, followed by mean surface roughness Ra. There was a strong correlation between surface gloss and surface roughness for all the materials except the ceramics. The evaluation of the deterioration curves of individual specimens revealed a more or less synchronous course suspecting hinting specific external conditions and not showing the true variability in relation to the tested material. SIGNIFICANCE: The surface roughness and gloss of dental materials changes with brushing time and load and thus results in different material rankings. Apart from Grandio, the hybrid composite resins were more prone to surface changes than microfilled composites. The deterioration potential of a composite material can be quickly assessed by measuring surface gloss. For this purpose, a brushing time of 10h (=72,000 strokes) is needed. In further comparative studies, specimens of different materials should be tested in one series to estimate the true variability.