The underestimation of compliance to direct help requests explained by adaptive sampling

Helping behavior is any intentional behavior that benefits another living being or group (Hogg & Vaughan, 2010). People tend to underestimate the probability that others will comply with their direct requests for help (Flynn & Lake, 2008). This implies that when they need help, they will assess the probability of getting it (De Paulo, 1982, cited in Flynn & Lake, 2008) and then they will tend to estimate one that is actually lower than the real chance, so they may not even consider worth asking for it. Existing explanations for this phenomenon attribute it to a mistaken cost computation by the help seeker, who will emphasize the instrumental cost of “saying yes”, ignoring that the potential helper also needs to take into account the social cost of saying “no”. And the truth is that, especially in face-to-face interactions, the discomfort caused by refusing to help can be very high. In short, help seekers tend to fail to realize that it might be more costly to refuse to comply with a help request rather than accepting. A similar effect has been observed when estimating trustworthiness of people. Fetchenhauer and Dunning (2010) showed that people also tend to underestimate it. This bias is reduced when, instead of asymmetric feedback (getting feedback only when deciding to trust the other person), symmetric feedback (always given) was provided. This cause could as well be applicable to help seeking as people only receive feedback when they actually make their request but not otherwise. Fazio, Shook, and Eiser (2004) studied something that could be reinforcing these outcomes: Learning asymmetries. By means of a computer game called BeanFest, they showed that people learn better about negatively valenced objects (beans in this case) than about positively valenced ones. This learning asymmetry esteemed from “information gain being contingent on approach behavior” (p. 293), which could be identified with what Fetchenhauer and Dunning mention as ‘asymmetric feedback’, and hence also with help requests. Fazio et al. also found a generalization asymmetry in favor of negative attitudes versus positive ones. They attributed it to a negativity bias that “weights resemblance to a known negative more heavily than resemblance to a positive” (p. 300). Applied to help seeking scenarios, this would mean that when facing an unknown situation, people would tend to generalize and infer that is more likely that they get a negative rather than a positive outcome from it, so, along with what it was said before, people will be more inclined to think that they will get a “no” when requesting help. Denrell and Le Mens (2011) present a different perspective when trying to explain judgment biases in general. They deviate from the classical inappropriate information processing (depicted among other by Fiske & Taylor, 2007, and Tversky & Kahneman, 1974) and explain this in terms of ‘adaptive sampling’. Adaptive sampling is a sampling mechanism in which the selection of sample items is conditioned by the values of the variable of interest previously observed (Thompson, 2011). Sampling adaptively allows individuals to safeguard themselves from experiences they went through once and turned out to lay negative outcomes. However, it also prevents them from giving a second chance to those experiences to get an updated outcome that could maybe turn into a positive one, a more positive one, or just one that regresses to the mean, whatever direction that implies. That, as Denrell and Le Mens (2011) explained, makes sense: If you go to a restaurant, and you did not like the food, you do not choose that restaurant again. This is what we think could be happening when asking for help: When we get a “no”, we stop asking. And here, we want to provide a complementary explanation for the underestimation of the probability that others comply with our direct help requests based on adaptive sampling. First, we will develop and explain a model that represents the theory. Later on, we will test it empirically by means of experiments, and will elaborate on the analysis of its results.

The knock-out of ARP3a gene affects F-actin cytoskeleton organization altering cellular tip growth, morphology and development in moss Physcomitrella patens.

The seven subunit Arp2/3 complex is a highly conserved nucleation factor of actin microfilaments. We have isolated the genomic sequence encoding a putative Arp3a protein of the moss Physcomitrella patens. The disruption of this ARP3A gene by allele replacement has generated loss-of-function mutants displaying a complex developmental phenotype. The loss-of function of ARP3A gene results in shortened, almost cubic chloronemal cells displaying affected tip growth and lacking differentiation to caulonemal cells. In moss arp3a mutants, buds differentiate directly from chloronemata to form stunted leafy shoots having differentiated leaves similar to wild type. Yet, rhizoids never differentiate from stem epidermal cells. To characterize the F-actin organization in the arp3a-mutated cells, we disrupted ARP3A gene in the previously described HGT1 strain expressing conditionally the GFP-talin marker. In vivo observation of the F-actin cytoskeleton during P. patens development demonstrated that loss-of-function of Arp3a is associated with the disappearance of specific F-actin cortical structures associated with the establishment of localized cellular growth domains. Finally, we show that constitutive expression of the P. patens Arp3a and its Arabidopsis thaliana orthologs efficiently complement the mutated phenotype indicating a high degree of evolutionary conservation of the Arp3 function in land plants.

Double incretin receptor knock-out (DIRKO) mice present with alterations of trabecular and cortical micromorphology and bone strength.

A role for gut hormone in bone physiology has been suspected. We evidenced alterations of microstructural morphology (trabecular and cortical) and bone strength (both at the whole-bone - and tissue-level) in double incretin receptor knock-out (DIRKO) mice as compared to wild-type littermates. These results support a role for gut hormones in bone physiology. INTRODUCTION: The two incretins, glucose-dependent insulinotropic polypeptide (GIP) and glucagon-like peptide-1 (GLP-1), have been shown to control bone remodeling and strength. However, lessons from single incretin receptor knock-out mice highlighted a compensatory mechanism induced by elevated sensitivity to the other gut hormone. As such, it is unclear whether the bone alterations observed in GIP or GLP-1 receptor deficient animals resulted from the lack of a functional gut hormone receptor, or by higher sensitivity for the other gut hormone. The aims of the present study were to investigate the bone microstructural morphology, as well as bone tissue properties, in double incretin receptor knock-out (DIRKO) mice. METHODS: Twenty-six-week-old DIRKO mice were age- and sex-matched with wild-type (WT) littermates. Bone microstructural morphology was assessed at the femur by microCT and quantitative X-ray imaging, while tissue properties were investigated by quantitative backscattered electron imaging and Fourier-transformed infrared microscopy. Bone mechanical response was assessed at the whole-bone- and tissue-level by 3-point bending and nanoindentation, respectively. RESULTS: As compared to WT animals, DIRKO mice presented significant augmentations in trabecular bone mass and trabecular number whereas bone outer diameter, cortical thickness, and cortical area were reduced. At the whole-bone-level, yield stress, ultimate stress, and post-yield work to fracture were significantly reduced in DIRKO animals. At the tissue-level, only collagen maturity was reduced by 9 % in DIRKO mice leading to reductions in maximum load, hardness, and dissipated energy. CONCLUSIONS: This study demonstrated the critical role of gut hormones in controlling bone microstructural morphology and tissue properties.

In & Out – 180 habitatges per a gent jove i gent gran Camí Antic de València al Poblenou

Estratègies d’ordenació: L’ordenació proposada vol recollir la hibridesa i complexitat d’espais típica del Poble Nou. Caracteritzat pels espais lliures de mida intermèdia –a cavall entre els dels teixits i els del eixamples – i per la riquesa en les seves articulacions (mitjançant passatges, a través d’edificis,…) ; per la permeabilitat cap a l’interior de l’illa: la connexió dels buits interiors amb els carrers i espais públics annexes o per la variabilitat del gra edificat.És per això que l’edificació no s’entén com una sèrie de blocs aïllats sinó que està concebuda com una gran peça articulada, amb una alçada constant en el volum a carrer i una lleugera variabilitat volumètrica en altura en els diferents volums interiors de igual mòdul i de gra menor, homòleg al del seu context urbà més pròxim.És essencial al projecte la definició de l’espai buit interior de l’illa en relació als habitatges, i la seva relació –a una escala major- amb els espais lliures de l’entorn. L’ordenació proposada configura dos paisatges diferents: un pati més urbà, delimitat en planta baixa per un equipament del barri i al que s’hi aboquen els habitatges per a joves i un altre més tranquil i més tou, un jardí per als més grans, accessible des del carrer i des de l’espai públic contiguEl volum més llarg afegeix una nova inflexió a les que ja té el carrer, ampliant-lo amb un espai amb funció de vestíbul i recuperant així, a partir d’una traça parcel•laria històrica, la direcció de l’Eixample.Els diferents volums es relacionen/articulen mitjançant corredors i espais col•lectius de distintes mesures i qualitats. Espais de relació, de dimensió variable, en diferents situacions relatives –respecte al ple, al sòl- i amb distints caràcters, que van del privat al públic...passant pel col•lectiu.Les galeries i els corredors d'accés als habitatges, protagonistes d'aquests espais híbrids (privats-semiprivats-col•lectius/ interiors-exteriors/ tancats-oberts), es converteixen gràcies a la flexibilitat en el tancament de la unitat d'habitació en espais d'intercanvi, on la variabilitat en l'ús permet diferents apropiacions de l'espai col•lectiu.La superposició en altura d'aquests espais funciona com una estructura lleugera adossada a la façana, és una epidermis complexa amb aparença de bastida.L’edificació té la voluntat de tancar-se a carrer amb una façana poc perforada, que llisca indiferent al carrer, i d’obrir-se a l’interior de l’illa, a sud, on es torna complexa, amb successives pells i tamisos...

Combining digital elevation model analysis and run-out modeling to characterize hazard posed by a potentially unstable rock slope at Turtle Mountain, Alberta, Canada

Turtle Mountain in Alberta, Canada has become an important field laboratory for testing different techniques related to the characterization and monitoring of large slope mass movements as the stability of large portions of the eastern face of the mountain is still questionable. In order to better quantify the volumes potentially unstable and the most probable failure mechanisms and potential consequences, structural analysis and runout modeling were preformed. The structural features of the eastern face were investigated using a high resolution digital elevation model (HRDEM). According to displacement datasets and structural observations, potential failure mechanisms affecting different portions of the mountain have been assessed. The volumes of the different potentially unstable blocks have been calculated using the Sloping Local Base Level (SLBL) method. Based on the volume estimation, two and three dimensional dynamic runout analyses have been performed. Calibration of this analysis is based on the experience from the adjacent Frank Slide and other similar rock avalanches. The results will be used to improve the contingency plans within the hazard area.

Redefining dropping out in online higher education: a case study from the UOC

In recent years, studies into the reasons for dropping out of higher education (including online education) have been undertaken with greater regularity, parallel to the rise in the relative weight of this type of education, compared with brick-and-mortar education. However, the work invested in characterising the students who drop out of education, compared with those who do not, appears not to have had the same relevance as that invested in the analysis of the causes. The definition of dropping out is very sensitive to the context. In this article, we reach a purely empirical definition of student dropping out, based on the probability of not continuing a specific academic programme following several consecutive semesters of "theoretical break". Dropping out should be properly defined before analysing its causes, as well as comparing the drop-out rates between the different online programmes, or between online and on-campus ones. Our results show that there are significant differences among programmes, depending on their theoretical extension, but not their domain of knowledge.

Mapping out customer segments and marketing channels in the Finnish Homelift market

Työn tavoitteena oli saada selville ketkä ovat uuden tuotteen, eli kotihissin asiakkaat. Mitkä ovat tuotteen mahdollisuudet Suomen markkinoilla ja onko markkinoilla odotettavissa kasvua, sekä miten tähän mahdolliseen kasvuun päästäisiin käsiksi. Kotihissin ominaisuudet vaikuttavat siihen, että se on tarkoitettu asennettavaksi yksityisiin pientaloihin. Uuden tuotteen ansiosta KONE voi liittää nykyiseen vahvaan toimialaansa, eli kerrostaloihin, uuden aluevaltauksen; Pientalot. Tämä 'laajentuminen' tuo mukanaan kuluttajamarkkinoiden haasteet. Markkinatilanteen selvittämiseen käyttin jo olemassa olevaa tietoa hyväkseni; sanomalehdistä markkinatutkimuksiin. Asiakasryhmät kartoitin tutustumalla messutapahtumissa saatuihin kontakteihin. Päätutkimusmenetelmänä käytin haastatteluja. Niihin osallistui kaikkiaan 14 vastaajaa. He vasatsivat kysymyksiin ostomotiiveista ja tuotteesta. Eräs haastattelujen tärkeimmistä teemoista liittyi yhteydenpito- ja jakelukanaviin, joista 12 vastaajaa antoivat mielipiteitään. Työni tulokset viittaavat siihen, että markkinatilanne näyttää positiiviselta KONEen kannalta. Tutkimuksesta sain selville kotihissin asiakassegmentit ja myös miten nämä potentiaaliset asiakkaat saadaan tehokkaimmin tavoitettua.

Proyecto de diseño de las instalaciones de climatización y eléctrica de un local destinado a tareas de laboratorio y oficinas para una industria cerámica

El objetivo del presente proyecto será el definir, en su totalidad, las instalaciones de climatización/ventilación y eléctrica, de un local destinado a realizar las tareas de laboratorio de resistencia de materiales y oficinas para una industria cerámica. Esta iniciativa nace como una necesidad de este tipo de empresas a ofrecer unos productos de mayor calidad que la competencia, bastante dura en la zona donde se encuentran. Aún y la existencia de laboratorios homologados que ofrecen este tipo de servicios, se cree necesario este tipo de instalaciones, basados en la investigación de nuevos materiales y/o productos, pudiendo así ofrecer al cliente las máximas garantías de calidad de los productos finales obtenidos.