The effects of a diet formulation with oats, soybeans, and flax on lipid profiles and uricemia in patients with AIDS and dyslipidemia

Introduction Although the initiation of highly active antiretroviral therapy (HAART) is accompanied by an attenuation of viral load, metabolic disorders characterized by hyperglycemia, dyslipidemia, and lipodystrophy are often observed in patients under this treatment. Certain foods, such as oat bran, soy protein, and flaxseed, have been shown to improve a patient's lipid profile despite possible increases in uricemia. Thus, a bioactive compound was formulated using these foods to help patients with HIV/AIDS control metabolic disorders resulting from HAART. Methods An uncontrolled before and after study was performed. The total cholesterol, HDL-cholesterol, LDL-cholesterol, triglycerides, and uric acid before and after 3 months of consuming the formulation were compared in patients. The compound was formulated such that 40g (the recommended daily intake) contained approximately 10g of flaxseed, 20g of oat bran, and 10g of textured soy protein. Results The study population consisted of 139 patients, 31 of whom were included in the final analysis. There were no significant variations between the laboratory results obtained before and after consumption of the compound. Conclusions The regular consumption of the formulation together with individualized dietary guidance did not reduce lipid levels and did not contribute to an increase in uricemia in the study group. However, new studies with higher doses of the foods that compose the formulation should be encouraged to investigate whether these foods can positively influence the lipid profiles of these patients.

Are lipid disorders involved in the predominance of human T-lymphotropic virus-1 infections in women?

Abstract INTRODUCTION : The human T-lymphotropic virus-1 (HTLV-1) is associated with chronic inflammatory diseases such as HTLV-1-associated myelopathy/tropical spastic paraparesis (HAM/TSP), a chronic inflammatory disease. Disturbances in lipid metabolism are involved in inflammatory and demyelinating diseases. METHODS : Plasma levels of triglycerides, total cholesterol, and fractions of HTLV-1-infected individuals of both sexes with different clinical progressions were determined. RESULTS : Elevated levels of triglyceride and very low-density lipoproteins (VLDL) were exclusively detected in HTLV-1-infected women from asymptomatic and HAM/TSP groups compared with uninfected individuals (p = 0.02). CONCLUSIONS : Elevated triglyceride and VLDL levels in HTLV-1-infected women may be related to the predominance of HAM/TSP in women.

The role of s-nitrosothiols and rho-kinase 1 in glucose and lipid metabolism

RESUMO: Na sociedade contemporânea a diabetes tipo 2 e a obesidade estão a aumentar exponencialmente, representando um grave problema de saúde pública. De acordo com a IDF “A diabetes e a obesidade são o principal problema de saúde pública do século XXI’. Para além destas duas patologias, a prevalência de esteatose hepática não-alcoólica (NAFLD), entre a população obesa e diabética, é de cerca de 90%. O aumento da obesidade, diabetes e NAFLD tem uma forte correlação com o aumento do consumo de gorduras e açúcares, acompanhado de um decréscimo acentuado da actividade física. A obesidade, diabetes e NAFLD tem sido escrupolosamente investigada mas as terapêuticas disponíveis continuam a ser muito limitadas. Tendo em conta o número crescente e alarmante de obesos e diabéticos o conhecimento detalhado da patofisiologia da obesidade, diabetes e NAFLD, tendo em vista a necessidade extrema de desenvolvimento de novas estratégias terapêuticas, é da mais elevada urgência. O fígado é reconhecido como um orgão primordial no controlo da homeostase. No estado pós-prandial, o fígado converte a glucose em glicogénio e lípidos. Em contraste, no estado de jejum, o fígado promove a produção de glucose. Sistemas neuronais e hormonais, bem como o estado metabólico do fígado, controlam de forma muito precisa a alternância entre os diferentes substratos metabólicos, dependente do estado prandial. A insulina tem um papel central no controlo do metabolismo energético no fígado; se, por um lado, inibe a produção hepática de glucose e corpos cetónicos, por outro, promove a glicólise e a lipogénese. O metabolismo energético no fígado é também regulado por vários factores de transcrição e co-reguladores que, por sua vez, são regulados pela insulina, glucagina e outras hormonas metabólicas. Em conjunto, todos estes factores e reguladores vão controlar de forma muito estreita a gluconeogénese, a β-oxidação e a lipogénese, no fígado. Para além dos já conhecidos reguladores do metabolismo hepático, novas moléculas têm sido estudadas como tendo um papel fundamental na regulação do metabolismo energético no fígado. Qualquer desequilíbrio no metabolismo hepático vai contribuir para a insulino-resistência, NAFLD e diabetes tipo 2. O principal objectivo do trabalho de investigação aqui apresentado é o contributo para o estudo detalhado da patogénese da diabetes e obesidade, num contexto de dietas ricas em açúcares e gorduras, e com a perspectiva de explorar novas estratégias terapêuticas. Os objectivos específicos deste trabalho eram: primeiro, determinar se o tratamento com glutationo (GSH) e óxido nítrico (NO) era suficiente para melhorar a insulino-resistência associada ao elevado consumo de sacarose; segundo, determinar o papel da Rho-kinase 1 (ROCK1) na regulação do metabolismo hepático da glucose e dos lípidos; e terceiro, estudar o efeito do metilsulfonilmetano (MSM) em doenças metabólicas associadas à obesidade. Na primeira parte deste trabalho de investigação foram utilizados ratos Wistar machos sujeitos a uma dieta rica em sacarose (HS). Tal como esperado, estes animais apresentavam insulino-resistência e hiperinsulinémia. A dieta HS levou ao aumento dos níveis hepáticos de NO e ao decréscimo dos níveis de GSH no fígado. Em jejum, a administração intraportal de GSH e NO, a animais saudáveis promoveu um aumento significativo da sensibilidade à insulina. Também nestes animais, a administração intravenosa de S-nitrosotióis, compostos orgânicos que contém um grupo nitroso acoplado a um átomo de enxofre de um tiol, promoveu o aumento significativo da sensibilidade à insulina. Pelo contrário, em animais sujeitos à dieta HS, as doses padrão de GSH + NO e de S-nitrosotióis não conseguiram promover o aumento da sensibilidade à insulina. No entanto, ao aumentar a dose de S-nitrosotióis administrados por via intravenosa, foi possível observar o aumento da sensibilidade à insulina dependente da dose, indicando um possível papel dos S-nitrosotióis como sensibilizadores de insulina. O estudo detalhado do papel dos S-nitrosotióis na via de sinalização da insulina revelou que há um aumento da fosforilação do receptor da insulina (IR) e da proteína cinase B (Akt), sugerindo um efeito dos S-nitrosotióis nesta via de sinalização. Os resultados apresentados nesta primeira parte sugerem que os S-nitrosotióis promovem a correcta acção da insulina, podendo vir a ser importantes alvos terapêuticos. Na segunda parte deste trabalho de investigação utilizámos murganhos, com uma delecção específica da ROCK1 no fígado, e sujeitos a uma dieta rica em lípidos (HFD). Foi possível concluir que a ausência da ROCK1 no fígado previne a obesidade, melhora a sensibilidade à insulina e protege contra a esteatose hepática. A ausência de ROCK1 no fígado levou a um decréscimo significativo da expressão génica de genes associados à lipogénese, com uma diminuição acentuada do fluxo metabólico associado a esta via. Pelo contrário, a sobreexpressão de ROCK1, exclusivamente no fígado, promove a insulino-resistência e a esteatose hepática no contexto de obesidade induzida pela dieta. Para além disto, a delecção da ROCK1 no fígado de animais obesos e diabéticos, os murganhos deficientes em leptina, corroborou os dados obtidos no primeiro modelo animal, com a franca melhoria da hiperglicémia, hiperinsulinémia e esteatose hepática. Os dados que compõem esta parte do trabalho de investigação sugerem que a ROCK1 tem um papel crucial na regulação do metabolismo lipídico. Na terceira e última parte deste trabalho de investigação foi investigado o efeito do composto metilsulfunilmetano (MSM), um composto organosulfúrico naturalmente presente em plantas e utilizado também como suplemento dietético, em murganhos obesos e insulino-resistentes, por exposição a uma dieta rica em lípidos (DIO). O tratamento com MSM melhorou a insulino-resistência e protegeu contra a esteatose hepática. O conteúdo hepático em triglicéridos e colesterol também diminuíu de forma significativa nos animais DIO sujeitos ao tratamento com MSM, bem como a expressão génica associada à lipogénese. Para além disto, o tratamento com MSM levou a uma diminuição da expressão génica associada à inflamação. De realçar que o tratamento com MSM levou a uma melhoria do perfil hematopoiético destes animais, tanto na medula óssea como no sangue. Para comprovar o efeito benéfico do MSM na obesidade e insulino-resistência utilizámos murganhos deficientes no receptor da leptina, e por isso obesos e diabéticos, tendo observado um perfil semelhante ao obtido para murganhos sujeitos a uma dieta rica em lípidos e tratados com MSM. Concluímos, através dos dados recolhidos, que o MSM como suplemento pode ter efeitos benéficos na hiperinsulinémia, insulino-resistência e inflamação que caracterizam a diabetes tipo 2. Em resumo, os dados obtidos neste trabalho de investigação mostram que os S-nitrosotióis podem ter um papel importante como sensibilizadores da insulina, promovendo um aumento da sensibilidade à insulina num contexto de dietas ricas em sacarose. Para além disto, estudos in vitro, sugerem que os S-nitrosotióis regulam, especificamente, a via de sinalização da insulina. Este trabalho teve também como objectivo o estudo da ROCK1 como regulador do metabolismo da glucose e dos lípidos no fígado. Através do estudo de animais com uma delecção ou uma sobreexpressão da ROCK1 no fígado mostrou-se que esta tem um papel crucial na patogénese da obesidade e diabetes tipo 2, especificamente através do controlo da lipogénese de novo. Finalmente, foi também objectivo deste trabalho, explorar o efeito do MSM em animais DIO e deficientes em leptina. O tratamento com MSM protege de forma evidente contra a obesidade e insulino-resistência, com especial enfâse para a capacidade que esta molécula demonstrou ter na protecção contra a inflamação. Em conjunto os vários estudos aqui apresentados mostram que tanto os S-nitrosotióis como a ROCK1 têm um papel na patogénese da obesidade e diabetes tipo 2 e que a utilização de MSM como suplemento às terapêuticas convencionais pode ter um papel no tratamentos de doenças metabólicas.-------------------------------ABSTRACT: In modern western societies type 2 diabetes and obesity are increasing exponentially, representing a somber public concern. According to the International Diabetes Federation (IDF) ‘Diabetes and Obesity are the biggest public health challenges of the 21st century’. Aside from these the prevalence of nonalcoholic fatty liver disease (NAFLD), among the diabetic and obese population, is as high as 90%. It is now well established that the increase in obesity, diabetes and NAFLD strongly correlates with an increase in fat and sugar intake in our diet, alongside physical inactivity. The pathogenesis of obesity, diabetes and NAFLD has been thoroughly studied but the treatment options available are still narrow. Considering the alarming number in the obese and diabetic population the complete understanding of the pathogenesis, keeping in mind that new therapeutic strategies need to be attained, is of the highest urgency. The liver has been well established as a fundamental organ in regulating whole-body homeostasis. In the fed state the liver converts the glucose into glycogen and lipids. Conversely, in the fasted state, glucose will be produced in the liver. Neuronal and hormonal systems, as well as the hepatic metabolic states, tightly control the fast to fed switch in metabolic fuels. Insulin has a central role in controlling hepatic energy metabolism, by suppressing glucose production and ketogenesis, while stimulating glycolysis and lipogenesis. Liver energy metabolism is also regulated by various transcription factors and coregulators that are, in turn, regulated by insulin, glucagon and other metabolic hormones. Together, these regulators will act to control gluconeogenesis, β-oxidation and lipogenesis in the liver. Aside from the well-established regulators of liver energy metabolism new molecules are being studied has having a role in regulating hepatic metabolism. Any imbalance in the liver energy metabolism is a major contributor to insulin resistance, NAFLD and type 2 diabetes. The overall goal of this research work was to contribute to the understanding of the pathogenesis of diabetes and obesity, on a setting of high-sucrose and high-fat diets, and to explore potential therapeutic options. The specific aims were: first, to determine if treatment with glutathione (GSH) and nitric oxide (NO) was sufficient to ameliorate insulin resistance induced by high-sucrose feeding; second, to determine the physiological role of rho-kinase 1 (ROCK1) in regulating hepatic and lipid metabolism; and third, to study the effect of methylsulfonylmethane (MSM) on obesity-linked metabolic disorders. In the first part of this research work we used male Wistar rats fed a high-sucrose (HS) diet. As expected, rats fed a HS diet were insulin resistant and hyperinsulinemic. HS feeding increased hepatic levels of NO, while decreasing GSH. In fasted healthy animals administration of both GSH and NO, to the liver, was able to increase insulin sensitivity. Intravenous administration of S-nitrosothiols, organic compounds containing a nitroso group attached to the sulfur atom of a thiol, in fasted control animals also increased insulin sensitivity. Under HS feeding the standard doses of GSH + NO and S-nitrosothiols were unable to promote an increase in insulin sensitivity. However, the intravenous administration of increasing concentrations of S-nitrosothiols was able to restore insulin sensitivity, suggesting that S-nitrosothiols have an insulin sensitizing effect. Investigation of the effect of S-nitrosothiols on the insulin signaling pathway showed increased phosphorylation of the insulin receptor (IR) and protein kinase B (Akt), suggesting that S-nitrosothiols may have an effect on the insulin signaling pathway. Together, these data showed that S-nitrosothiols promote normal insulin action, suggesting that they may act as potential pharmacological tools. In the second part of this research work we used liver-specific ROCK1 knockout mice fed a high-fat (HF) diet. Liver-specific deletion of ROCK1 prevented obesity, improved insulin sensitivity and protected against hepatic steatosis. Deficiency of ROCK1 in the liver caused a significant decrease in the gene expression of lipogenesis associated gene, ultimately leading to decreased lipogenesis. Contrariwise, ROCK1 overexpression in the liver promoted insulin resistance and hepatic steatosis in diet-induced obesity. Furthermore, liver-specific deletion of ROCK1 in obese and diabetic mice, the leptin-deficient mice, improved the typical hyperglycemia, hyperinsulinemia and liver steatosis. Together, these data identify ROCK1 as a crucial regulator of lipid metabolism. In the third and final part of this research work we investigated the effect of MSM, an organosulfur compound naturally found in plants and used as a dietary supplement, on diet-induced obese (DIO) and insulin resistant mice. MSM treatment ameliorated insulin resistance and protected against hepatosteatosis. Hepatic content in triglycerides and cholesterol was significantly decreased by MSM treatment, as well as lipogenesis associated gene expression. Furthermore, MSM treated mice had decreased inflammation associated gene expression in the liver. Importantly, FACS analysis showed that MSM treatment rescued the inflammatory hematopoietic phenotype of DIO mice in the bone marrow and the peripheral blood. Moreover, MSM treatment of the obese and diabetic mice, the leptin-deficient mice, resulted in similar effects as the ones observed for DIO mice. Collectively, these data suggest that MSM supplementation has a beneficial effect on hyperinsulinemia, insulin resistance and inflammation, which are often found in type 2 diabetes. In conclusion, this research work showed that S-nitrosothiols may play a role as insulin sensitizers, restoring insulin sensitivity in a setting of high-sucrose induced insulin resistance. Furthermore, in vitro studies suggest that S-nitrosothiols specifically regulate the insulin signaling pathway. This research work also investigated the role of hepatic ROCK1 in regulation of glucose and lipid metabolism. Using liver-specific ROCK 1 knockout and ROCK1 overexpressing mice it was shown that ROCK1 plays a role in the pathogenesis of obesity and type 2 diabetes, specifically through regulation of the de novo lipogenesis pathway. Finally, this research work aimed to explore the effect of MSM in DIO and leptin receptor-deficient mice. MSM strongly protects against obesity and insulin resistance, moreover showed a robust ability to decrease inflammation. Together, the individual studies that compose this dissertation showed that S-nitrosothiols and ROCK1 play a role in the pathogenesis of obesity and type 2 diabetes and that MSM supplementation may have a role in the treatment of metabolic disorders.

Development and modulation of magnetic responsive supported ionic liquid membranes

The work presented in this thesis aims at developing a new separation process based on the application of supported magnetic ionic liquid membranes, SMILMs, using magnetic ionic liquids, MILs. MILs have attracted growing interest due to their ability to change their physicochemical characteristics when exposed to variable magnetic field conditions. The magnetic responsive behavior of MILs is thus expected to contribute for the development of more efficient separation processes, such as supported liquid membranes, where MILs may be used as a selective carrier. Driven by the MILs behavior, these membranes are expected to switch reversibly their permeability and selectivity by in situ and non-invasive adjustment of the conditions (e.g. intensity, direction vector and uniformity) of an external applied magnetic field. The development of these magnetic responsive membrane processes were anticipated by studies, performed along the first stage of this PhD work, aiming at getting a deep knowledge on the influence of magnetic field on MILs properties. The influence of the magnetic field on the molecular dynamics and structural rearrangement of MILs ionic network was assessed through a 1H-NMR technique. Through the 1H-NMR relaxometry analysis it was possible to estimate the self-diffusion profiles of two different model MILs, [Aliquat][FeCl4] and [P66614][FeCl4]. A comparative analysis was established between the behavior of magnetic and non-magnetic ionic liquids, MILs and ILs, to facilitate the perception of the magnetic field impact on MILs properties. In contrast to ILs, MILs show a specific relaxation mechanism, characterized by the magnetic dependence of their self-diffusion coefficients. MILs self-diffusion coefficients increased in the presence of magnetic field whereas ILs self-diffusion was not affected. In order to understand the reasons underlying the magnetic dependence of MILs self-diffusion, studies were performed to investigate the influence of the magnetic field on MILs’ viscosity. It was observed that the MIL´s viscosity decreases with the increase of the magnetic field, explaining the increase of MILs self-diffusion according to the modified Stokes- Einstein equation. Different gas and liquid transport studies were therefore performed aiming to determine the influence of the magnetic behavior of MILs on solute transport through SMILMs. Gas permeation studies were performed using pure CO2 andN2 gas streams and air, using a series of phosphonium cation based MILs, containing different paramagnetic anions. Transport studies were conducted in the presence and absence of magnetic field at a maximum intensity of 1.5T. The results revealed that gas permeability increased in the presence of the magnetic field, however, without affecting the membrane selectivity. The increase of gas permeability through SMILMs was related to the decrease of the MILs viscosity under magnetic field conditions.(...)

Saloplastic membranes as green devices for soft tissue regeneration

Implantable devices must exhibit mechanical properties similar to native tissues to promote appropriate cellular behavior and regeneration. Herein, we report a new membrane manufacture method based on the synthesis of polyelectrolyte complexes (PECs) that exhibit saloplasticity, i.e. variable physical-chemistry using salt as a plasticizer. This is a Green Chemistry approach, as PECs generate structures that are stabilized solely by reversible electrostatic interactions, avoiding the use of harmful crosslinkers completely. Furthermore, natural polyelectrolytes - chitosan and alginate - were used. Upon mixing them, membranes were obtained by drying the PECs at 37ºC, yielding compact PECs without resorting to organicsolvents. The plasticizing effect of salt after synthesis was shown by measuring tensile mechanical properties, which were lower when samples were immersed in high ionic strength solutions.Salt was also used during membrane synthesis in different quan- tities (0 M, 0.15 M and 0.5 M in NaCl) yielding structures with no significant differences in morphology and degradation (around 15% after 3 months in lysozyme). However, swelling was higher (about 10x) when synthesized in the presence of salt. In vitro cell studies using L929 fibroblasts showed that cells adhered and proliferated preferentially in membranes fabricated in the presence of salt (i.e. the membranes with lower tensile strength). Structures with physical-chemical properties controlled with precision open a path to tissue engineering strategies depending on fine tuning mechanical properties and cellular adhesion simply by changing ionic strength during membrane manufacture

Compact saloplastic membranes of natural polysaccharides for soft tissue engineering

The regeneration of soft biological tissues requires new substitutes that exhibit mechanical properties similar to the native tissue. Herein, thin saloplastic membranes with tunable physical properties are prepared by complexation of chitosan and alginate solutions containing different concentrations of sodium chloride. Polyelectrolyte complexes (PECs) are transferred to flat Petri dishes for compaction into membrane shapes by sedimentation and solvent evaporation. All membranes are resistant to degradation by lysozyme and are stable in solutions with pH values between 1 and 13. Immersing the different membranes in new doping solutions of increasing salt concentrations triggers the typical saloplastic behavior, with a high water absorption and decrease of the rigidity and ultimate tensile strength. The range of such variations is tuned by the sodium chloride amount used in the synthesis: high salt concentrations increase water uptake and tensile moduli, while decreasing the ultimate strength. Cellular assays demonstrate high proliferation rates and viability of L929 fibroblasts seeded onto the most rigid membranes. The results validate the use of saloplastic membranes as soft tissue substitutes for future biomedical applications.

Nonsolvent induced phase separation preparation of poly(vinylidene fluoride-co-chlorotrifluoroethylene) membranes with tailored morphology, piezoelectric phase content and mechanical properties

Poly(vinylidene fluoride-co-chlorotrifluoroethylene) – P(VDF-CTFE) membranes are increasingly interesting for a wide range of applications, including battery separators, filtration membranes and biomedical applications. This work reports on the morphology, hydrophobicity, thermal and mechanical properties variation of P(VDF-CTFE) membranes processed by nonsolvent induced phase separation technique (NIPS) as a function of the main processing parameters. All membranes show a porous structure composed of large spherulites, (interconnected) micropores and/or microvoids depending on the processing conditions used that in turn affect their hydrophobicity and mechanical properties. The degree of crystallinity of the membranes remains approximately constant with a value of about 15 %, except for the membranes immediately immersed in ethanol, which is of about 23 %. In turn, the crystalline phases present in the copolymer is mainly affected by the temperature and nonsolvent characteristics of the coagulation bath, the β-phase content ranging from 33 to 100 %, depending on those processing parameters. It was show that the temperature of water-based coagulation bath plays an important role in order to produce structurally uniform and homogeneous porous membranes, which is particularly important from the point of view of technological applications.

Poly(vinylidene fluoride-co-chlorotrifluoroethylene) (PVDF-CTFE) lithium-ion battery separator membranes prepared by phase inversion

Separator membranes based on poly(vinylidene fluoride-co-chlorotrifluoroethylene) (PVDF-CTFE) were prepared by solvent casting technique based on its phase diagram in N,Ndimethylformamide (DMF) solvent. The microstructure of the PVDF-CTFE separator membranes depends on the initial position (temperature and concentration) of the solution in the phase diagram of the PVDF-CTFE/DMF system. A porous microstructure is achieved for PVDF-CTFE membranes with solvent evaporation temperature up to 50 ºC for a polymer/solvent relative concentration of 20 wt%. The ionic conductivity of the separator depends on the degree of porosity and electrolyte uptake, the highest room temperature value being 1.5 mS.cm-1 for the sample with 20 wt% of polymer concentration and solvent evaporation temperature at 25 ºC saturated with 1 mol L-1 lithium bis (trifluoromethanesulfonyl) imide (LiTFSI) in propylene carbonate (PC). This PVDF-CTFE separator membrane in Li/C-LiFePO4 half-cell shows good cyclability and rate capability, showing a discharge value after 50 cycles of 92 mAh.g-1 at 2 C, which is still 55% of the theoretical value. PVDF-CTFE separators are thus excellent candidates for high-power and safety lithium-ion batteries applications.

Phase morphology and crystallinity of poly(vinylidene fluoride)/poly(ethylene oxide) piezoelectric blend membranes

Polymer blends based on poly(vinylidene fluoride), PVDF and poly(ethylene oxide), PEO, with varying compositions have been prepared by solvent casting, the polymer blend films being obtained from solutions in dimethyl formamide at 70ºC. Under these conditions PVDF crystallizes from solution while PEO remains in the molten state. Then, PEO crystallizes from the melt confined by PVDF crystalls during cooling to room temperature. PVDF crystallized from DMF solutions adopt predominantly the electroactive β-phase (85%). Nevertheless when PEO is introduced in the polymer blend the β-phase content decreases slightly to 70%. The piezoelectric coefficient (d33) in pristine PVDF is -5 pC/N and decreases with increasing PEO content in the PVDF/PEO blends. Blend morphology, observed by electron and atomic force microscopy, shows the confinement of PEO between the already formed PVDF crystals. On the other hand the sample contraction when PEO is extracted from the blend with water (which is not a solvent for PVDF) allows proving the co-continuity of both phases in the blend. PEO crystallization kinetics have been characterized by DSC both in isothermal and cooling scans experiments showing important differences in crystalline fraction and crystallization rate with sample composition.

Effect of the degree of porosity on the performance of poly(vinylidene fluoride-trifluoroethylene)/poly(ethylene oxide) blend membranes for lithium-ion battery separators

Porous polymer membranes based on poly(vinylidene fluoride-trifluoroethylene)/poly(ethylene oxide) copolymers, P(VDF-TrFE)/PEO, are prepared through the, from partial to total, elimination of PEO, leading to interconnected micropores in the polymer blends. Electrolyte uptake, thermal and mechanical properties depend on the amount of PEO present in the polymer blend. Further, the degree of crystallinity of PEO and the elastic modulus (E´) of the polymer blend decrease with increasing PEO removal. Electrical properties of the polymer blend membranes are influenced by the porosity and are dominated by diffusion. The temperature dependence of ionic conductivity follows the Arrhenius behavior. It is the highest for the membranes with a volume fraction of pores of 44% (i.e, 90% PEO removal), reaching a value of 0.54 mS.cm-1 at room temperature. Battery performance was determined by assembling Li/C-LiFePO4 swagelok cells. The polymer blends with 90% PEO removal exhibit rate (124 mAhg-1 at C/5 and 47 mAhg-1 at 2C) and cycling capabilities suitable for lithium ion battery applications.

Modeling separator membranes physical characteristics for optimized lithium ion battery performance

The effect of varying separator membrane physical parameters such as degree of porosity, tortuosity and thickness, on battery delivered capacity was studied in order to optimize performance of lithium-ion batteries. This was achieved by a theoretical mathematical model relating the Bruggeman coefficient with the degree of porosity and tortuosity. The inclusion of the separator membrane in the simulation model of the battery system does not affect the delivered capacity of the battery. The ionic conductivity of the separator and consequently the delivered capacity values obtained at different discharge rates depends on the value of the Bruggeman coefficient, which is related with the degree of porosity and tortuosity of the membrane. Independently of scan rate, the optimal value of the degree of porosity is above 50% and the separator thickness should range between 1 μm at 32 μm for improved battery performance.

Poly(vinylidene fluoride-trifluoroethylene)/NAY zeolite hybrid membranes as a drug release platform applied to ibuprofen release

Poly(vinylidene fluoride-trifluoroethylene)/NaY zeolite composite membranes were prepared by solvent casting and evaluated as a suitable drug release platform through the evaluation of loading and release of ibuprofen. The membranes were characterized at the morphological, structural and mechanical levels. The 1H-NMR spectra indicate that only the membranes with 16 and 32 % of NaY were useful for IBU encapsulation and the drug release was followed by UV-Vis spectroscopy. The release profile is independent of the zeolite content and can be described by the Korsmeyer-Peppas model. The membrane with 32 % zeolite content releases more than double IBU amount when compared with the membrane with 16 % showing that zeolite content allows tailoring membrane drug release content for specific applications. The drug release platform developed in this work is suitable for other drugs and applications.

Hydrophobic/hydrophilic P(VDF-TrFE)/PHEA polymer blend membranes

Polymer blend membranes have been obtained consisting of a hydrophilic and a hydrophobic polymers distributed in co-continuous phases. In order to obtain stable membranes in aqueous environments, the hydrophilic phase is formed by a poly(hydrohyethyl acrylate), PHEA, network while the hydrophobic phase is formed by poly(vinylidene fluoride-co-trifluoroethylene) P(VDF-TrFE). To obtain the composites, in a first stage, P(VDF-TrFE) is blended with poly(ethylene oxyde) (PEO), the latter used as sacrificial porogen. P(VDF-TrFE)/PEO blend membranes were prepared by solvent casting at 70° followed by cooling to room temperature. Then PEO is removed from the membrane by immersion in water obtaining a P(VDF-TrFE) porous membrane. After removing of the PEO polymer, a P(VDF-TrFE) membrane results in which pores are collapsed. Nevertheless the pores reopen when a mixture of hydroxethyl acrylate (HEA) monomer, ethyleneglycol dimethacrylate (as crosslinker) and ethanol (as diluent) is absorbed in the membrane and subsequent polymerization yields hybrid hydrophilic/hydrophobic membranes with controlled porosity. The membranes are thus suitable for lithium-ion battery separator membranes and/or biostable supports for cell culture in biomedical applications.

Towards high performance and multi-functional structural membranes using advanced fibrous and textile materials

Scientific and technological advancements in the area of fibrous and textile materials have greatly enhanced their application potential in several high-end technical and industrial sectors including construction, transportation, medical, sports, aerospace engineering, electronics and so on. Excellent performance accompanied by light-weight, mechanical flexibility, tailor-ability, design flexibility, easy fabrication and relatively lower cost are the driving forces towards wide applications of these materials. Cost-effective fabrication of various advanced and functional materials for structural parts, medical devices, sensors, energy harvesting devices, capacitors, batteries, and many others has been possible using fibrous and textile materials. Structural membranes are one of the innovative applications of textile structures and these novel building skins are becoming very popular due to flexible design aesthetics, durability, lightweight and cost benefits. Current demand on high performance and multi-functional materials in structural applications has motivated to go beyond the basic textile structures used for structural membranes and to use innovative textile materials. Structural membranes with self-cleaning, thermoregulation and energy harvesting capability (using solar cells) are examples of such recently developed multi-functional membranes. Besides these, there exist enormous opportunities to develop wide varieties of multi-functional membranes using functional textile materials. Additionally, it is also possible to further enhance the performance and functionalities of structural membranes using advanced fibrous architectures such as 2D, 3D, hybrid, multi-layer and so on. In this context, the present paper gives an overview of various advanced and functional fibrous and textile materials which have enormous application potential in structural membranes.