Blue upconversion enhancement by a factor of 200 in Tm 3+-doped tellurite glass by codoping with Nd 3+ ions

We investigated near-infrared-to-blue upconversion from thulium (Tm 3+) doped in tellurite glasses upon continuous wave excitation near 800 nm. We observed an enhancement of over two orders of magnitude of the upconverted emission at ∼480nm when neodymium (Nd 3+) ions were codoped with Tm 3+ ions. For comparison, using a Tm 3+:Nd 3+ codoped fluorozirconate glass as a reference material we observed a 40-fold enhancement of the blue emission. Analysis of the blue emission for samples with different doping levels of Nd 3+ ions showed that energy transfer between Nd 3+ and Tm 3+ is the mechanism responsible for the enhancement in upconversion. © 2002 American Institute of Physics. © 2002 American Institute of Physics.

Polissacarídeos biodegradáveis úteis para a preparação de sistemas de liberação controlada de fármacos. Parte 1: Quitosana

Due to an increasing interest, a vast number of biodegradable polymers have been obtained recently. Polymers naturally produced, such as cellulose, starch, chitosan and alginate, represent biodegradable materials, with low toxicity and low cost. Among polysaccharides, chitosan has been of great interest of the industrial and academic research, due to its special qualities of biodegradability and biocompatibility and, on the other hand, to the versatility of its use in several physical forms and products. A significant growth in the development of new dosage forms capable to deliver the drug in a controlled and targeted way has been observed in these last years. Such pharmaceutical forms search, mainly, the reduction of the dose administered and of the administration frequency, the reduction of adverse side effects and, consequently, a better patient compliance. The present paper describes the use of chitosan in pharmaceutical products, especially in drug controlled delivery systems.

Liberação de mitomicina C - Influência de diferentes materiais

Purpose: To evaluate the quantity of Mitomycin C discharged from different materials with the same size, potentially used in the application of this medicine accessible in the surgery center of an Universitarian Hospital. Material and Method: It was studied 20 fragments with 5 to 5mm, from each 5 materials: Lyostypt, Weck sponge, absorbable cloth which is used to clean, cotton plate and of cotton swab concerning the saturation capacity and the quantity of mitomicyn discharged. In the first stage, it was studied the saturation capacity from each material. In the second stage, it was applied 0,1 ml solution of Mitomicyn C (0,5 mg/ml) and it was measured the biggest discharge halo in the filter paper and the discharged quantity (the difference between the weight before and after the medicine discharge). Results: The absorveble capacity from each material varied from 0,144 ml (absorbable cloth) to 0,216 ml Weck sponge. The discharge of Mitomicyn C was varied too, the biggest was the cotton plate and absorbable cloth. The Weck sponge and the cotton (of cotton swab) discharges the same quantity. Conclusion: The different materials discharged different quantities of Mitomicyn C. This can explain the different results of the trabeculectomy with Mitomicyn C. The surveys must inform not only the material used to apply the mitomycin C but the volume used too. Because the same values of mitomycin C liberation, cotton may substitute Weck sponje in trabeculectomy.

Microemulsões: Estrutura e aplicações como sistema de liberação de fármacos

Depending on formula composition, microemulsions may be used as a vehicle for drug administration. In this work the main applicable parameters used in the development of pharmaceutical microemulsions (ME) are analyzed. The conceptual description of the system, theoretical parameters related to formation of internal phases and some aspects of ME stability are described. The pseudo ternary phase diagram is used to characterize ME boundaries and to describe different structures in several regions of the diagram. Some applications of ME as drug delivery systems for different administration routes are also analyzed. ME offer advantages as drug delivery systems, because they favor drug absorption, being in most cases faster and more efficient than other methods in delivering the same amount of drug.

Citotoxicidade de Styrax camporum Pohl em macrófagos peritoneais e a liberação de H2O2

The immunological response includes wide contexts involving several cells, and the macrophage is crucial in the cellular immune response. Several stimuli to macrophage membrane may induce the liberation of H2O2, contributing to antibacterial and cytotoxicical actions. Nowadays, there is a tendency to study natural products to verify their capacity of acting in the immune system. This study evaluated the citotoxicity of the bulk extract and the hexanic and acetic fractions extracted from Styrax camporum Pohl (Styracaceae) and the production of H2O2, on murine peritonal macrophages cultures exposed to fractions extracted from this plant. The results showed that the fraction HX 2 mg/ml produced the liberation of H 2O2 in high concentrations and to 4 mg/ml was observed high citotoxicity. The fractions AC did not produce the liberation of H 2O2 and EB was produced in low levels. We conclude that this HX is a potent stimulator of macrophage.

Synthesis, characterization and thermal behaviour of solid-state compounds of 4-methoxybenzoate with some bivalent transition metal ions

Solid-state M-4-MeO-Bz compounds, where M stands for bivalent Mn, Co, Ni, Cu and Zn and 4-MeO-Bz is 4-methoxybenzoate, have been synthesized. Simultaneous thermogravimetry-differential thermal analysis (TG-DTA), differential scanning calorimetry (DSC), X-ray powder diffractometry, infrared spectroscopy, elemental analysis and complexometry were used to characterize and to study the thermal behaviour of these compounds. The results led to have information about the composition, dehydration, thermal stability and thermal decomposition of the isolated compounds. © 2005 Akadémiai Kiadó, Budapest.

Estudos sobre liberação controlada e vetorização de drogas através de lipossomas

The text highlights the state of research related with the application of liposomes in the control of drug delivery and drug target to infectious diseases. Liposomes have several pharmaceutical applications and this manuscript is primarily focused on the potential of this colloidal system as an antibiotic carrier system and of administration through several accesses via to organism. Numerous case studies in which liposomes have successfully been used to improve pharmacological drug effect are presented. Mechanisms involved in drug delivery, application possibilities, research and development and efforts to reach these objectives are discussed. © Copyright Moreira Jr. Editora. Todos os direitos reservados.

Análise quantitativa de fluoretos nos alginatos para uso odontológico

In this study, the aim was to measure the concentration of fluoride ions in dental alginates and the quantity released from alginate molds immersed in milliQ water, 0.1N hydrochloric acid and artificial saliva. Two separate lots of each of seven brands of alginate commercially available in Brazil were analyzed: Avagel, Deguprint, Hydrogum, Orthoprint, Jeltrate, Jeltrate Plus and Jeltrate Chromatic. Fluoride was measured in each sample by direct potentiometry, using the combined fluoride-ion selective electrode. The brands with the highest fluoride concentrations were Hydrogum (7052.87 μg/g), Jeltrate Plus (6519.68 μg/g) and Orthoprint (6218.18 μg/g). Only in Hydrogum and Jeltrate were different fluoride concentrations found in lots one and two. The various materials showed differences in the amount of fluoride released from the molds into the immersion medium, the mean concentration being highest in Hydrogum and Orthoprint, in all three media. The immersion medium also influenced the release of fluoride, which was lower in saliva than in water and highest in acid. Considering that the concentrations of fluoride found in the alginates tested were high and that various sources of exposure to fluoride exist, there is a need for constant monitoring of alginates intended for dental use.

Energy transfer and frequency upconversion involving triads of Pr3+ ions in (Pr3+, Gd3+) doped fluoroindate glass

Blue and ultraviolet luminescence in (Pr3+, Gd3+) doped fluoroindate glass is studied for excitation in the red region (≈590 nm). Frequency upconversion (UC) is observed due to energy transfer (ET) among three Pr3+ ions initially excited to the D21 state corresponding to the ET process D21 + D21 + D21 → S01 + H53 + H53. Additionally, UC luminescence from states P 72 6 and I 72 6 of Gd3+ is observed for an excitation wavelength resonant with transitions of the Pr3+ ions. The characterization of the luminescence signals allowed to determine ET rate among the Pr3+ ions and provides evidence of interconfigurational ET between Gd3+ and Pr3+ ions. © 2006 American Institute of Physics.

Preparation of a silica gel modified with 2-amino-1,3,4-thiadiazole for adsorption of metal ions and electroanalytical application

Silica gel with a specific area of 382 m2 g-1 and an average pore diameter of 60 Å was chemically modified with 2-amino-1,3,4-thiadiazole, for the purpose of selective adsorption of heavy metals ions and possible use as a chemically modified carbon paste electrode (CMCPE). The following properties of this functionalized silica gel are discussed: selective adsorption of heavy metal ions measured by batch and chromatographic column techniques, and utilization as preconcentration agent in a chemically modified carbon paste electrode (CMCPE) for determination of mercury(II). The chemical selectivity of this functional group and the selectivity of voltammetry were combined for preconcentration and determination. ©2006 Sociedade Brasileira de Química.

Estratégias biotecnológicas para a liberação controlada de antígenos e adjuvantes em vacinas através de lipossomas

Liposomes (LP) are colloidal systems with ability to compartmentalize therapeutic molecules in order to improve biological activity, decreases the potential toxicity, and to obtain prolonged effect. In this work it was discussed the role of the various liposomes types to encapsulate drug molecules able to provoke some immunological response (drugs, antigens and DNA). The effect of the liposomes and the parameters about the formation of the structures are also analyzed. Detailed literature review shows that, depending on the molecules polarity and the superficial charge of the liposome structures, the system may be efficiently used to optimize the therapeutic effects by means of the release control or through a drug delivery mechanism.

Compressive fatigue in titanium dental implants submitted to fluoride ions action

The aim of this study was to assess the influence of a fluoridated medium on the mechanical properties of an internal hexagon implant-abutment set, by means of compression, mechanical cycling and metallographic characterization by scanning electronic microscopy. Five years of regular use of oral hygiene with a sodium fluoride solution content of 1500 ppm were simulated, immersing the samples in this medium for 184 hours, with the solutions being changed every 12 hours. Data were analyzed at a 95% confidence level with Fisher's exact test. After the action of fluoride ions, a negative influence occurred in the mechanical cycling test performed in a servohydraulic machine (Material Test System-810) set to a frequency of 15 Hz with 100,000 cycles and programmed to 60% of the maximum resistance of static compression test. The sets tended to fracture by compression on the screw, characterized by mixed ruptures with predominance of fragile fracture, as observed by microscopy. An evidence of corrosion by pitting on sample surfaces was found after the fluoride ions action. It may be concluded that prolonged contact with fluoride ions is harmful to the mechanical properties of commercially pure titanium structures.

Interaction between humic substances and metallic ions: A selectivity study of humic substances and their possible therapeutic application

The complexation capacity of humic substances extracted from peat samples taken from the Mogi River in Ribeirao Preto, SP, Brazil, was determined using metal ions (Al(III), Pb(II), Cr(VI) and Cd(II)), yielding the following order of affinity: Cr(VI)< Cd(II)-1. These findings reinforce the possibility of using humic substances as a metal detoxicant. ©2007 Sociedade Brasileira de Química.

Avaliação da liberação de lh e da concentração de progesterona em protocolos ovsynch e heatsynch em bubalinos (bubalus bubalis)

The objective of this study was to evaluate the LH surge after last hormonal injection of synchronization of ovulation protocols in buffalo. Fifteen multiparous buffaloes received 25 mg of Lecirelin in Day 0, and 150 mg of D-Cloprostenol on Day 7. On Day 8, estradiol benzoate was injected in Group 1 (0.5 mg, n = 5) and Group 2 (1.0 mg, n = 5). On Day 9, five buffaloes received 25 mg of Lecirelin (Control). Blood samples were collected for measure the LH concentrations on Day 7 and then every 3 hours until 72 hours after the PGF 2a injection. For evaluation of LH surge were compared the interval between PGF 2a injection to LH surge, duration, amplitude and area under the LH peak. The LH surge occurred 51.0 + 0.0 hours, 47.3 + 2.7 hours and 47.0 + 3.8 hours after PGF 2a injection for Control, Group 1 and Group 2, respectively (P > 0.05). The duration of LH peak in Control (7.8 + 1.5 hours) was shorter than Groups 1 and 2 (10.5 + 1.5 hours vs. 10.8 + 2.4 hours, respectively; P < 0.05). The amplitudes of LH peak were 4.5 + 0.4 ng/mL, 4.0 + 0.4 ng/mL and 4.3 + 0.8 ng/mL for Control, Group 1 and Group 2, respectively (P > 0.05). The area under LH peak for Control (4.8 ± 0.7) was smaller than the areas of the Groups 1 and 2 (8.8 ± 2.5 vs. 8.7 2.2, respectively; P < 0.05). In summary, the estradiol benzoate injection provided higher duration and area of LH peak than GnRH injection in Ovsynch protocol in buffalo.

Influence of cerium (IV) ions on the inorganic and organic phase for preparation of a siloxane-PMMA based film on tin plate substrate

Tinplate is one of the most widely used food canning materials, however, there are significant problems related to the use of tinplate cans, such as alterations in sensory features affecting food quality and corrosion phenomena of the canning material. To avoid corrosion problems different methods have been used for the passivation of tinplate such protective lacquers or different kinds of corrosion inhibitors (chromate and dichromate). However, chromates and dichromates are extremely harmful to the environment and can cause carcinogenic tumors to humans. An option, protective coatings obtained by the sol-gel process, act as a physical barrier, which isolates the surface of metal protecting from the corrosive agents. The aim of this work is to study the influence of addition of cerium (IV) ions in the inorganic and organic part of sol-gel processing in the formation of hybrid coatings based on siloxane-PMMA on tin plate. The coatings were obtained by dip-coating technique and evaluated by open circuit and impedance measurements, linear polarization and polarization curves obtained in 3.5% NaCl solution. The results have clearly shown the improvement on the protective properties of the Ce 4+ modified film when added into the organic phase, which can be due to the formation of a more uniform and densely reticulated siloxane-PMMA film. © 2009 by NACE International.