996 resultados para Intra-articular injection
Resumo:
A determinação da relação parede-lume das arteríolas intra-hepáticas, na esquistossomose mansônica (forma hepatesplênica), demonstra a existência de uma hipotrofia da camada muscular daqueles vasos. Esse achado sugere redução do fluxo sangüíneo arterial hepático nessa entidade.
Resumo:
Analisa-se a evolução da mortalidade por DIP em Salvador-BA e seus diferenciais intra-urbanos mediante estudo de série temporal e de agregados espaciais, nos anos noventa. O DATASUS e declarações de óbitos foram as fontes de dados. Na análise temporal, empregou-se mortalidade proporcional, taxa de mortalidade e razão de mortalidade padronizada (RMP). No estudo espacial, analisou-se as taxas de mortalidade por DIP segundo um índice de condições de vida (ICV). Entre 1991 e 1995, a mortalidade proporcional por DIP foi de 8,3% e o risco de morrer variou entre 55,9 e 34,0 por 100 mil habitantes. No período seguinte, a variação foi entre 52,8 e 41,1 por 100 mil habitantes. A razão de mortalidade padronizada por doenças infecciosas e parasitárias em 1998 foi de 1,3. As doenças infecciosas intestinais continuam sendo uma das principais causas de morte desse grupo. As áreas da cidade onde as condições de vida eram mais baixas concentravam as maiores taxas de mortalidade por DIP. A despeito do declínio, ainda existe um excesso de mortalidade por DIP em Salvador. O modelo de desenvolvimento do país e a reemergência de algumas doenças podem estar contribuindo para este padrão.
Resumo:
Foi realizada pesquisa de anticorpos IgG, IgM e IgA anti-Toxoplasma gondii no soro e fluidos intra-oculares (humor aquoso e vítreo) de pacientes com toxoplasmose ocular. A partir dos resultados obtidos verificou-se que anticorpos IgG e IgA intraocular anti-Toxoplasma gondii podem vir a ser importantes marcadores no diagnóstico de toxoplasmose ocular.
Resumo:
One of the biggest challenges for humanity is global warming and consequently, climate changes. Even though there has been increasing public awareness and investments from numerous countries concerning renewable energies, fossil fuels are and will continue to be in the near future, the main source of energy. Carbon capture and storage (CCS) is believed to be a serious measure to mitigate CO2 concentration. CCS briefly consists of capturing CO2 from the atmosphere or stationary emission sources and transporting and storing it via mineral carbonation, in oceans or geological media. The latter is referred to as carbon capture and geological storage (CCGS) and is considered to be the most promising of all solutions. Generally it consists of a storage (e.g. depleted oil reservoirs and deep saline aquifers) and sealing (commonly termed caprock in the oil industry) formations. The present study concerns the injection of CO2 into deep aquifers and regardless injection conditions, temperature gradients between carbon dioxide and the storage formation are likely to occur. Should the CO2 temperature be lower than the storage formation, a contractive behaviour of the reservoir and caprock is expected. The latter can result in the opening of new paths or re-opening of fractures, favouring leakage and compromising the CCGS project. During CO2 injection, coupled thermo-hydro-mechanical phenomena occur, which due to their complexity, hamper the assessment of each relative influence. For this purpose, several analyses were carried out in order to evaluate their influences but focusing on the thermal contractive behaviour. It was finally concluded that depending on mechanical and thermal properties of the pair aquifer-seal, the sealing caprock can undergo significant decreases in effective stress.
Resumo:
O objetivo deste trabalho foi estudar mudanças na prevalência de lesões intra-epiteliais escamosas cervicais entre mulheres HIV-1 positivas após a introdução da terapia antiretroviral altamente eficaz e avaliar modificações na prevalência de fatores de risco para lesões intra-epiteliais escamosas cervicais. Foram estudadas 50 pacientes em 1995-1999 e 120 pacientes em 2006-2007. Coletaram-se dados demográficos, comportamentais, laboratoriais. Calculou-se a prevalência de lesões intra-epiteliais escamosas cervicais entre os dois períodos, assim como as prevalências dos outros fatores de risco. No primeiro período, encontrou-se uma prevalência de lesões intra-epiteliais escamosas cervicais de 66% e no segundo de 43% (p=0,007). A média do CD4 em 1995-1999 foi de 275,71 (DP 283,23); a média do CD4 em 2006-2007 foi de 463,32 (DP 231.90), (p=0,001). Houve mudanças significativas nos fatores idade, cor, estado conjugal e fumo entre os dois períodos. A diminuição da prevalência de lesões intra-epiteliais escamosas cervicais pode estar relacionada ao uso da estratégia de terapia antiretroviral altamente eficaz assim como à mudança de fatores de risco para lesões intra-epiteliais escamosas cervicais ao longo do tempo.
Resumo:
ABSTRACTINTRODUCTION:Hydatidosis is the result of infection with the larval stages of some species of the genus Echinococcus. Treatment approaches for hydatid cysts include the use of albendazole, surgery, and/or medico-surgical procedures. The choice of the therapeutic surgical approach depends on the cyst number and localization, surgeon expertise, and presence of complications. The present study aimed to compare the outcomes of the following therapeutic approaches for the treatment of hepatic hydatid cysts: pericystectomy; the puncture, aspiration, injection, and reaspiration (PAIR) technique; and the PAIR technique followed by deroofing, evacuation of cysts, and omentoplasty.METHODS:The 54 patients were divided into 3 groups: Group I (14 patients) who underwent pericystectomy, Group II (23 patients) who underwent the PAIR technique, and Group III (17 patients) who underwent the PAIR technique followed by deroofing and omentoplasty. The diagnosis of hydatid cysts was based on serological testing using enzyme-linked immunosorbent assay, abdominal ultrasound, and parasitological examination of the cyst contents. Morbidity, mortality, length of hospital stay, recurrence, and postoperative complications were evaluated.RESULTS:Postoperative bleeding, infection, and recurrence were reported in Groups I and II; Group III did not experience postoperative infection and had shorter hospital stays. Recurrence and postoperative complications did not occur in Group III.CONCLUSIONS:The partial surgical procedure with deroofing, evacuation of the cysts, and omentoplasty, as performed in the present study, is recommended as a safe and effective method for elimination of the entire parasite with minimal possibility for intra-peritoneal spillage.
Resumo:
RESUMO - Introdução: No âmbito das emergências intra-hospitalares investigou-se a hipótese da presença da Equipa Emergência Médica Intra-hospitalar (EEMI) (DGS, 2010) num Centro Hospitalar (CH), contribuir para a redução do número de mortos por Paragem Cárdiorespiratória (PCR) intra-hospitalar, quando comparado com outro CH dotado de uma equipa tradicional de resposta à PCR. Metodologia: Tratou-se de um estudo observacional, retrospetivo (2010 a 2014), com base nos dados do Grupo de Diagnóstico Homogéneo (GDH), analisado numa perspetiva de custo-efetividade no impacto sobre incidência de PCR e taxa de mortalidade. Resultados: Observou-se que o CH com EEMI apresentou uma Redução Risco Absoluto (RRA) de 9,01% de morte por PCR. A taxa de mortalidade calculada foi de 2,82 casos por 1000 episódios de internamento em que a incidência de PCR foi de 28,24 casos por cada 10 000 habitantes, duas vezes menor que CH em comparação. Quando introduzidas manobras de Ressuscitação Cárdiopulmonar (RCP), o mesmo CH teve um maior número de PCR revertidas, com uma taxa de mortalidade 2 vezes menor que o CH sem EEMI. Conclusão: Resultados demonstraram que os dois CH apresentaram riscos diferentes, em que a probabilidade do doente hospitalizado de morrer após ocorrência de PCR foi menor no grupo exposto à EEMI, com OR = 0,496 [IC 95% (0,372 a 0,662)] para dados populacionais (p = 0,0013), e OR = 0,618 [IC 95% (0,298 a 1,281)] para dados individuais, (p = 0,194). Face a melhores resultados em Saúde, considerou-se a implementação da EEMI, uma medida custo-efetiva, uma vez que o principal requisito traduz-se por reorganização das equipas tradicionais para uma vertente de prevenção da PCR.
Resumo:
PURPOSE: Characterization of the structural changes occurring in the pulmonary arteries resulting from surgically produced congenital diaphragmatic hernia in rabbits, with particular emphasis on the preventive effects of prenatal tracheal ligation or administration of intra-amniotic dexamethasone or surfactant. METHODS: Twenty rabbit fetuses underwent surgical creation of a left-sided congenital diaphragmatic hernia on the 24th or 25th gestational day. They were divided according to the following procedures: congenital diaphragmatic hernia (n = 5), congenital diaphragmatic hernia plus tracheal ligation (n = 5), congenital diaphragmatic hernia plus intra-amniotic administration of dexamethasone 0.4 mg (n = 5) or surfactant (Curosurf 40 mg, n = 5). On gestational day 30, all the fetuses were delivered by caesarean section and killed. A control group consisted of five nonoperated fetuses. Histomorphometric analysis of medial thickness, cell nuclei density, and elastic fiber density of pulmonary arterial walls was performed. RESULTS: Arteries with an external diameter > 100 mum have a decreased medial thickness, lower cell nuclei density, and greater elastic fiber density when compared with arteries with external diameter <= 100 mum. Congenital diaphragmatic hernia promoted a significant decrease in medial thickness and an increase in cell nuclei density in artery walls with external diameter > 100 mum. Prenatal treatments with tracheal ligation or intra-amniotic administration of dexamethasone or surfactant prevented these changes. In arteries with external diameter <= 100 mum, congenital diaphragmatic hernia promoted a significant increase in medial thickness and in cell nuclei density and a decrease in elastic fiber density. The prenatal treatments with tracheal ligation or intra-amniotic administration of dexamethasone or surfactant prevented these changes, although no effect was observed in elastic fiber density in the congenital diaphragmatic hernia plus dexamethasone group. CONCLUSIONS: Congenital diaphragmatic hernia promoted different structural changes for large or small arteries. The prenatal intra-amniotic administration of dexamethasone or surfactant had positive effects on the lung structural changes promoted by congenital diaphragmatic hernia, and these effects were comparable to the changes induced by tracheal ligation.
Resumo:
PURPOSE: The objective was to describe the results of the injection of immotile spermatozoa with flexible tails when only immotile spermatozoa are present in the semen sample. METHODS: A retrospective study was conducted to analyze the procedure results for 10 couples who participated in our intracytoplasmic sperm injection program. The sperm tail was considered flexible when it moved up and down independently of the head movement, and it was considered inflexible when the movement occurred together (tail plus head). The fertilization and pregnancy rate were analyzed. RESULTS: The normal fertilization rate (presence of 2 pronuclei) was 30.3% (40/132), and the abnormal fertilization rate (presence of less than or more than 2 pronuclei) was 6.81% (9/132). A total of 52 embryos were obtained with 9 transfer procedures performed (pregnancy rate: 11.12%). CONCLUSIONS: The sperm tail flexibility test (STFT) is an easy and cost-effective way for selecting viable immotile spermatozoa and can be used as an alternative method for determining the viability of spermatozoa. This test seems to be a simple and risk-free method when compared to the swelling test.
Resumo:
Wharton's jelly stem cells (WJSCs) are a potential source of transplantable stem cells in cartilage-regenerative strategies, due to their highly proliferative and multilineage differentiation capacity. We hypothesized that a non-direct co-culture system with human articular chondrocytes (hACs) could enhance the potential chondrogenic phenotype of hWJSCs during the expansion phase compared to those expanded in monoculture conditions. Primary hWJSCs were cultured in the bottom of a multiwell plate separated by a porous transwell membrane insert seeded with hACs. No statistically significant differences in hWJSCs duplication number were observed under either of the culture conditions during the expansion phase. hWJSCs under co-culture conditions show upregulations of collagen type I and II, COMP, TGFβ1 and aggrecan, as well as of the main cartilage transcription factor, SOX9, when compared to those cultured in the absence of chondrocytes. Chondrogenic differentiation of hWJSCs, previously expanded in co-culture and monoculture conditions, was evaluated for each cellular passage using the micromass culture model. Cells expanded in co-culture showed higher accumulation of glycosaminoglycans (GAGs) compared to cells in monoculture, and immunohistochemistry for localization of collagen type I revealed a strong detection signal when hWJSCs were expanded under monoculture conditions. In contrast, type II collagen was detected when cells were expanded under co-culture conditions, where numerous round-shaped cell clusters were observed. Using a micromass differentiation model, hWJSCs, previously exposed to soluble factors secreted by hACs, were able to express higher levels of chondrogenic genes with deposition of cartilage extracellular matrix components, suggesting their use as an alternative cell source for treating degenerated cartilage.
Resumo:
Dissertação de mestrado integrado em Engenharia de Materiais
Resumo:
Coagulase-negative staphylococci (CoNS) are common bacterial colonisers of the human skin. They are often involved in nosocomial infections due to biofilm formation in indwelling medical devices. While biofilm formation has been extensively studied in Staphylococcus epidermidis, little is known regarding other CoNS species. Here, biofilms from six different CoNS species were characterised in terms of biofilm composition and architecture. Interestingly, the ability to form a thick biofilm was not associated with any particular species, and high variability on biofilm accumulation was found within the same species. Cell viability assays also revealed different proportions of live and dead cells within biofilms formed by different species, although this parameter was particularly similar at the intra-species level. On the other hand, biofilm disruption assays demonstrated important inter- and intra-species differences regarding extracellular matrix composition. Lastly, confocal laser scanning microscopy (CLSM) experiments confirmed this variability, highlighting important differences and common features of CoNS biofilms. We hypothesised that the biofilm formation heterogeneity observed was rather associated with biofilm matrix composition than with cells themselves. Additionally, our results indicate that polysaccharides, DNA and proteins are fundamental pieces in the process of CoNS biofilm formation.
Resumo:
Due to the fact that different injection molding conditions tailor the mechanical response of the thermoplastic material, such effect must be considered earlier in the product development process. The existing approaches implemented in different commercial software solutions are very limited in their capabilities to estimate the influence of processing conditions on the mechanical properties. Thus, the accuracy of predictive simulations could be improved. In this study, we demonstrate how to establish straightforward processing-impact property relationships of talc-filled injection-molded polypropylene disc-shaped parts by assessing the thermomechanical environment (TME). To investigate the relationship between impact properties and the key operative variables (flow rate, melt and mold temperature, and holding pressure), the design of experiments approach was applied to systematically vary the TME of molded samples. The TME is characterized on computer flow simulation outputsanddefined bytwo thermomechanical indices (TMI): the cooling index (CI; associated to the core features) and the thermo-stress index (TSI; related to the skin features). The TMI methodology coupled to an integrated simulation program has been developed as a tool to predict the impact response. The dynamic impact properties (peak force, peak energy, and puncture energy) were evaluated using instrumented falling weight impact tests and were all found to be similarly affected by the imposed TME. The most important molding parameters affecting the impact properties were found to be the processing temperatures (melt andmold). CI revealed greater importance for the impact response than TSI. The developed integrative tool provided truthful predictions for the envisaged impact properties.
Resumo:
In this work we present the thermal characterization of the full scope of polyhydroxyalcanoate and poly(lactic acid) blends obtain by injection molding. Blends of polyhydroxyalcanoate and poly(lactic acid) (PHA/PLA) were prepared in different compositions ranging from 0–100% in steps of 10%. The blends were injection molded and then characterized by differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and wide angle X-ray diffraction (WAXD). The increment of PHA fraction increased the degree of crystallinity of the blend and the miscibility of the base polymers as verified by the Fox model. The WAXD analysis indicates that the presence of PHA hindered the PLA crystallization. The crystallization evolution trough PHA weight fraction (wf) shows a phase inversion around 50-60%. SEM analyses confirmed that the miscibility of PHA/PLA blends increased with the incorporation of PHA and became total for values of PHA higher that 50%.
Resumo:
Social intelligence is a favorable condition for career decision-making and development. The social intelligence indices of Portuguese students in school years prior to a career transition are characterized and intra and interindividual differences are analyzed. Participants were 1095 students (552, 50.4% women) with a mean age of 14.78 years (SD = 1.86), in the 8th (542, 49.5%), 10th (295, 26.9%) and 11th (258, 23.6%) grades. The Cognitive Test of Social Intelligence (PCIS) was administered at two moments, six months apart. Results indicate that the 8th grade obtained higher average scores in Problem Solving, Motivation and Self-confidence (time 1), while the 10th grade obtained better results in Problem Solving, Motivation and Familiarity (time 2). Between the assessment moments, all school years register an increase in Problem Solving and Self-confidence in social situations. These results constitute favorable psychological conditions for the promotion of ethical questioning in career guidance interventions.