An assurance-based model to holistically assess the information security posture

EXECUTIVE SUMMARY : Evaluating Information Security Posture within an organization is becoming a very complex task. Currently, the evaluation and assessment of Information Security are commonly performed using frameworks, methodologies and standards which often consider the various aspects of security independently. Unfortunately this is ineffective because it does not take into consideration the necessity of having a global and systemic multidimensional approach to Information Security evaluation. At the same time the overall security level is globally considered to be only as strong as its weakest link. This thesis proposes a model aiming to holistically assess all dimensions of security in order to minimize the likelihood that a given threat will exploit the weakest link. A formalized structure taking into account all security elements is presented; this is based on a methodological evaluation framework in which Information Security is evaluated from a global perspective. This dissertation is divided into three parts. Part One: Information Security Evaluation issues consists of four chapters. Chapter 1 is an introduction to the purpose of this research purpose and the Model that will be proposed. In this chapter we raise some questions with respect to "traditional evaluation methods" as well as identifying the principal elements to be addressed in this direction. Then we introduce the baseline attributes of our model and set out the expected result of evaluations according to our model. Chapter 2 is focused on the definition of Information Security to be used as a reference point for our evaluation model. The inherent concepts of the contents of a holistic and baseline Information Security Program are defined. Based on this, the most common roots-of-trust in Information Security are identified. Chapter 3 focuses on an analysis of the difference and the relationship between the concepts of Information Risk and Security Management. Comparing these two concepts allows us to identify the most relevant elements to be included within our evaluation model, while clearing situating these two notions within a defined framework is of the utmost importance for the results that will be obtained from the evaluation process. Chapter 4 sets out our evaluation model and the way it addresses issues relating to the evaluation of Information Security. Within this Chapter the underlying concepts of assurance and trust are discussed. Based on these two concepts, the structure of the model is developed in order to provide an assurance related platform as well as three evaluation attributes: "assurance structure", "quality issues", and "requirements achievement". Issues relating to each of these evaluation attributes are analysed with reference to sources such as methodologies, standards and published research papers. Then the operation of the model is discussed. Assurance levels, quality levels and maturity levels are defined in order to perform the evaluation according to the model. Part Two: Implementation of the Information Security Assurance Assessment Model (ISAAM) according to the Information Security Domains consists of four chapters. This is the section where our evaluation model is put into a welldefined context with respect to the four pre-defined Information Security dimensions: the Organizational dimension, Functional dimension, Human dimension, and Legal dimension. Each Information Security dimension is discussed in a separate chapter. For each dimension, the following two-phase evaluation path is followed. The first phase concerns the identification of the elements which will constitute the basis of the evaluation: ? Identification of the key elements within the dimension; ? Identification of the Focus Areas for each dimension, consisting of the security issues identified for each dimension; ? Identification of the Specific Factors for each dimension, consisting of the security measures or control addressing the security issues identified for each dimension. The second phase concerns the evaluation of each Information Security dimension by: ? The implementation of the evaluation model, based on the elements identified for each dimension within the first phase, by identifying the security tasks, processes, procedures, and actions that should have been performed by the organization to reach the desired level of protection; ? The maturity model for each dimension as a basis for reliance on security. For each dimension we propose a generic maturity model that could be used by every organization in order to define its own security requirements. Part three of this dissertation contains the Final Remarks, Supporting Resources and Annexes. With reference to the objectives of our thesis, the Final Remarks briefly analyse whether these objectives were achieved and suggest directions for future related research. Supporting resources comprise the bibliographic resources that were used to elaborate and justify our approach. Annexes include all the relevant topics identified within the literature to illustrate certain aspects of our approach. Our Information Security evaluation model is based on and integrates different Information Security best practices, standards, methodologies and research expertise which can be combined in order to define an reliable categorization of Information Security. After the definition of terms and requirements, an evaluation process should be performed in order to obtain evidence that the Information Security within the organization in question is adequately managed. We have specifically integrated into our model the most useful elements of these sources of information in order to provide a generic model able to be implemented in all kinds of organizations. The value added by our evaluation model is that it is easy to implement and operate and answers concrete needs in terms of reliance upon an efficient and dynamic evaluation tool through a coherent evaluation system. On that basis, our model could be implemented internally within organizations, allowing them to govern better their Information Security. RÉSUMÉ : Contexte général de la thèse L'évaluation de la sécurité en général, et plus particulièrement, celle de la sécurité de l'information, est devenue pour les organisations non seulement une mission cruciale à réaliser, mais aussi de plus en plus complexe. A l'heure actuelle, cette évaluation se base principalement sur des méthodologies, des bonnes pratiques, des normes ou des standards qui appréhendent séparément les différents aspects qui composent la sécurité de l'information. Nous pensons que cette manière d'évaluer la sécurité est inefficiente, car elle ne tient pas compte de l'interaction des différentes dimensions et composantes de la sécurité entre elles, bien qu'il soit admis depuis longtemps que le niveau de sécurité globale d'une organisation est toujours celui du maillon le plus faible de la chaîne sécuritaire. Nous avons identifié le besoin d'une approche globale, intégrée, systémique et multidimensionnelle de l'évaluation de la sécurité de l'information. En effet, et c'est le point de départ de notre thèse, nous démontrons que seule une prise en compte globale de la sécurité permettra de répondre aux exigences de sécurité optimale ainsi qu'aux besoins de protection spécifiques d'une organisation. Ainsi, notre thèse propose un nouveau paradigme d'évaluation de la sécurité afin de satisfaire aux besoins d'efficacité et d'efficience d'une organisation donnée. Nous proposons alors un modèle qui vise à évaluer d'une manière holistique toutes les dimensions de la sécurité, afin de minimiser la probabilité qu'une menace potentielle puisse exploiter des vulnérabilités et engendrer des dommages directs ou indirects. Ce modèle se base sur une structure formalisée qui prend en compte tous les éléments d'un système ou programme de sécurité. Ainsi, nous proposons un cadre méthodologique d'évaluation qui considère la sécurité de l'information à partir d'une perspective globale. Structure de la thèse et thèmes abordés Notre document est structuré en trois parties. La première intitulée : « La problématique de l'évaluation de la sécurité de l'information » est composée de quatre chapitres. Le chapitre 1 introduit l'objet de la recherche ainsi que les concepts de base du modèle d'évaluation proposé. La maniéré traditionnelle de l'évaluation de la sécurité fait l'objet d'une analyse critique pour identifier les éléments principaux et invariants à prendre en compte dans notre approche holistique. Les éléments de base de notre modèle d'évaluation ainsi que son fonctionnement attendu sont ensuite présentés pour pouvoir tracer les résultats attendus de ce modèle. Le chapitre 2 se focalise sur la définition de la notion de Sécurité de l'Information. Il ne s'agit pas d'une redéfinition de la notion de la sécurité, mais d'une mise en perspectives des dimensions, critères, indicateurs à utiliser comme base de référence, afin de déterminer l'objet de l'évaluation qui sera utilisé tout au long de notre travail. Les concepts inhérents de ce qui constitue le caractère holistique de la sécurité ainsi que les éléments constitutifs d'un niveau de référence de sécurité sont définis en conséquence. Ceci permet d'identifier ceux que nous avons dénommés « les racines de confiance ». Le chapitre 3 présente et analyse la différence et les relations qui existent entre les processus de la Gestion des Risques et de la Gestion de la Sécurité, afin d'identifier les éléments constitutifs du cadre de protection à inclure dans notre modèle d'évaluation. Le chapitre 4 est consacré à la présentation de notre modèle d'évaluation Information Security Assurance Assessment Model (ISAAM) et la manière dont il répond aux exigences de l'évaluation telle que nous les avons préalablement présentées. Dans ce chapitre les concepts sous-jacents relatifs aux notions d'assurance et de confiance sont analysés. En se basant sur ces deux concepts, la structure du modèle d'évaluation est développée pour obtenir une plateforme qui offre un certain niveau de garantie en s'appuyant sur trois attributs d'évaluation, à savoir : « la structure de confiance », « la qualité du processus », et « la réalisation des exigences et des objectifs ». Les problématiques liées à chacun de ces attributs d'évaluation sont analysées en se basant sur l'état de l'art de la recherche et de la littérature, sur les différentes méthodes existantes ainsi que sur les normes et les standards les plus courants dans le domaine de la sécurité. Sur cette base, trois différents niveaux d'évaluation sont construits, à savoir : le niveau d'assurance, le niveau de qualité et le niveau de maturité qui constituent la base de l'évaluation de l'état global de la sécurité d'une organisation. La deuxième partie: « L'application du Modèle d'évaluation de l'assurance de la sécurité de l'information par domaine de sécurité » est elle aussi composée de quatre chapitres. Le modèle d'évaluation déjà construit et analysé est, dans cette partie, mis dans un contexte spécifique selon les quatre dimensions prédéfinies de sécurité qui sont: la dimension Organisationnelle, la dimension Fonctionnelle, la dimension Humaine, et la dimension Légale. Chacune de ces dimensions et son évaluation spécifique fait l'objet d'un chapitre distinct. Pour chacune des dimensions, une évaluation en deux phases est construite comme suit. La première phase concerne l'identification des éléments qui constituent la base de l'évaluation: ? Identification des éléments clés de l'évaluation ; ? Identification des « Focus Area » pour chaque dimension qui représentent les problématiques se trouvant dans la dimension ; ? Identification des « Specific Factors » pour chaque Focus Area qui représentent les mesures de sécurité et de contrôle qui contribuent à résoudre ou à diminuer les impacts des risques. La deuxième phase concerne l'évaluation de chaque dimension précédemment présentées. Elle est constituée d'une part, de l'implémentation du modèle général d'évaluation à la dimension concernée en : ? Se basant sur les éléments spécifiés lors de la première phase ; ? Identifiant les taches sécuritaires spécifiques, les processus, les procédures qui auraient dû être effectués pour atteindre le niveau de protection souhaité. D'autre part, l'évaluation de chaque dimension est complétée par la proposition d'un modèle de maturité spécifique à chaque dimension, qui est à considérer comme une base de référence pour le niveau global de sécurité. Pour chaque dimension nous proposons un modèle de maturité générique qui peut être utilisé par chaque organisation, afin de spécifier ses propres exigences en matière de sécurité. Cela constitue une innovation dans le domaine de l'évaluation, que nous justifions pour chaque dimension et dont nous mettons systématiquement en avant la plus value apportée. La troisième partie de notre document est relative à la validation globale de notre proposition et contient en guise de conclusion, une mise en perspective critique de notre travail et des remarques finales. Cette dernière partie est complétée par une bibliographie et des annexes. Notre modèle d'évaluation de la sécurité intègre et se base sur de nombreuses sources d'expertise, telles que les bonnes pratiques, les normes, les standards, les méthodes et l'expertise de la recherche scientifique du domaine. Notre proposition constructive répond à un véritable problème non encore résolu, auquel doivent faire face toutes les organisations, indépendamment de la taille et du profil. Cela permettrait à ces dernières de spécifier leurs exigences particulières en matière du niveau de sécurité à satisfaire, d'instancier un processus d'évaluation spécifique à leurs besoins afin qu'elles puissent s'assurer que leur sécurité de l'information soit gérée d'une manière appropriée, offrant ainsi un certain niveau de confiance dans le degré de protection fourni. Nous avons intégré dans notre modèle le meilleur du savoir faire, de l'expérience et de l'expertise disponible actuellement au niveau international, dans le but de fournir un modèle d'évaluation simple, générique et applicable à un grand nombre d'organisations publiques ou privées. La valeur ajoutée de notre modèle d'évaluation réside précisément dans le fait qu'il est suffisamment générique et facile à implémenter tout en apportant des réponses sur les besoins concrets des organisations. Ainsi notre proposition constitue un outil d'évaluation fiable, efficient et dynamique découlant d'une approche d'évaluation cohérente. De ce fait, notre système d'évaluation peut être implémenté à l'interne par l'entreprise elle-même, sans recourir à des ressources supplémentaires et lui donne également ainsi la possibilité de mieux gouverner sa sécurité de l'information.

An artificial economy based on reinforcement learning and agent based modeling

In this paper, we employ techniques from artificial intelligence such as reinforcement learning and agent based modeling as building blocks of a computational model for an economy based on conventions. First we model the interaction among firms in the private sector. These firms behave in an information environment based on conventions, meaning that a firm is likely to behave as its neighbors if it observes that their actions lead to a good pay off. On the other hand, we propose the use of reinforcement learning as a computational model for the role of the government in the economy, as the agent that determines the fiscal policy, and whose objective is to maximize the growth of the economy. We present the implementation of a simulator of the proposed model based on SWARM, that employs the SARSA(λ) algorithm combined with a multilayer perceptron as the function approximation for the action value function.

U.K. HiGEM: The New U.K. High-Resolution Global Environment Model—Model Description and Basic Evaluation

This article describes the development and evaluation of the U.K.’s new High-Resolution Global Environmental Model (HiGEM), which is based on the latest climate configuration of the Met Office Unified Model, known as the Hadley Centre Global Environmental Model, version 1 (HadGEM1). In HiGEM, the horizontal resolution has been increased to 0.83° latitude × 1.25° longitude for the atmosphere, and 1/3° × 1/3° globally for the ocean. Multidecadal integrations of HiGEM, and the lower-resolution HadGEM, are used to explore the impact of resolution on the fidelity of climate simulations. Generally, SST errors are reduced in HiGEM. Cold SST errors associated with the path of the North Atlantic drift improve, and warm SST errors are reduced in upwelling stratocumulus regions where the simulation of low-level cloud is better at higher resolution. The ocean model in HiGEM allows ocean eddies to be partially resolved, which dramatically improves the representation of sea surface height variability. In the Southern Ocean, most of the heat transports in HiGEM is achieved by resolved eddy motions, which replaces the parameterized eddy heat transport in the lower-resolution model. HiGEM is also able to more realistically simulate small-scale features in the wind stress curl around islands and oceanic SST fronts, which may have implications for oceanic upwelling and ocean biology. Higher resolution in both the atmosphere and the ocean allows coupling to occur on small spatial scales. In particular, the small-scale interaction recently seen in satellite imagery between the atmosphere and tropical instability waves in the tropical Pacific Ocean is realistically captured in HiGEM. Tropical instability waves play a role in improving the simulation of the mean state of the tropical Pacific, which has important implications for climate variability. In particular, all aspects of the simulation of ENSO (spatial patterns, the time scales at which ENSO occurs, and global teleconnections) are much improved in HiGEM.

Comparison of energy evaluation systems and a mechanistic model for milk production by dairy cattle offered fresh grass-based diets

Grass-based diets are of increasing social-economic importance in dairy cattle farming, but their low supply of glucogenic nutrients may limit the production of milk. Current evaluation systems that assess the energy supply and requirements are based on metabolisable energy (ME) or net energy (NE). These systems do not consider the characteristics of the energy delivering nutrients. In contrast, mechanistic models take into account the site of digestion, the type of nutrient absorbed and the type of nutrient required for production of milk constituents, and may therefore give a better prediction of supply and requirement of nutrients. The objective of the present study is to compare the ability of three energy evaluation systems, viz. the Dutch NE system, the agricultural and food research council (AFRC) ME system, and the feed into milk (FIM) ME system, and of a mechanistic model based on Dijkstra et al. [Simulation of digestion in cattle fed sugar cane: prediction of nutrient supply for milk production with locally available supplements. J. Agric. Sci., Cambridge 127, 247-60] and Mills et al. [A mechanistic model of whole-tract digestion and methanogenesis in the lactating dairy cow: model development, evaluation and application. J. Anim. Sci. 79, 1584-97] to predict the feed value of grass-based diets for milk production. The dataset for evaluation consists of 41 treatments of grass-based diets (at least 0.75 g ryegrass/g diet on DM basis). For each model, the predicted energy or nutrient supply, based on observed intake, was compared with predicted requirement based on observed performance. Assessment of the error of energy or nutrient supply relative to requirement is made by calculation of mean square prediction error (MSPE) and by concordance correlation coefficient (CCC). All energy evaluation systems predicted energy requirement to be lower (6-11%) than energy supply. The root MSPE (expressed as a proportion of the supply) was lowest for the mechanistic model (0.061), followed by the Dutch NE system (0.082), FIM ME system (0.097) and AFRCME system(0.118). For the energy evaluation systems, the error due to overall bias of prediction dominated the MSPE, whereas for the mechanistic model, proportionally 0.76 of MSPE was due to random variation. CCC analysis confirmed the higher accuracy and precision of the mechanistic model compared with energy evaluation systems. The error of prediction was positively related to grass protein content for the Dutch NE system, and was also positively related to grass DMI level for all models. In conclusion, current energy evaluation systems overestimate energy supply relative to energy requirement on grass-based diets for dairy cattle. The mechanistic model predicted glucogenic nutrients to limit performance of dairy cattle on grass-based diets, and proved to be more accurate and precise than the energy systems. The mechanistic model could be improved by allowing glucose maintenance and utilization requirements parameters to be variable. (C) 2007 Elsevier B.V. All rights reserved.

Factors that cause genotype by environment interaction and use of a multiple-trait herd-cluster model for milk yield of Holstein cattle from Brazil and Colombia

Descriptive herd variables (DVHE) were used to explain genotype by environment interactions (G x E) for milk yield (MY) in Brazilian and Colombian production environments and to develop a herd-cluster model to estimate covariance components and genetic parameters for each herd environment group. Data consisted of 180,522 lactation records of 94,558 Holstein cows from 937 Brazilian and 400 Colombian herds. Herds in both countries were jointly grouped in thirds according to 8 DVHE: production level, phenotypic variability, age at first calving, calving interval, percentage of imported semen, lactation length, and herd size. For each DVHE, REML bivariate animal model analyses were used to estimate genetic correlations for MY between upper and lower thirds of the data. Based on estimates of genetic correlations, weights were assigned to each DVHE to group herds in a cluster analysis using the FASTCLUS procedure in SAS. Three clusters were defined, and genetic and residual variance components were heterogeneous among herd clusters. Estimates of heritability in clusters 1 and 3 were 0.28 and 0.29, respectively, but the estimate was larger (0.39) in Cluster 2. The genetic correlations of MY from different clusters ranged from 0.89 to 0.97. The herd-cluster model based on DVHE properly takes into account G x E by grouping similar environments accordingly and seems to be an alternative to simply considering country borders to distinguish between environments.

A unified solution to the small scale problems of the Lambda CDM model II: introducing parent-satellite interaction

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

MOOGLE: a metamodel-based model search engine

Models are becoming increasingly important in the software development process. As a consequence, the number of models being used is increasing, and so is the need for efficient mechanisms to search them. Various existing search engines could be used for this purpose, but they lack features to properly search models, mainly because they are strongly focused on text-based search. This paper presents Moogle, a model search engine that uses metamodeling information to create richer search indexes and to allow more complex queries to be performed. The paper also presents the results of an evaluation of Moogle, which showed that the metamodel information improves the accuracy of the search.

Mechanical Alterations in airway smooth muscle after interaction with indoor pollutant – A mathematical model.

The viscoelasticity of mammalian lung is determined by the mechanical properties and structural regulation of the airway smooth muscle (ASM). The exposure to polluted air may deteriorate these properties with harmful consequences to individual health. Formaldehyde (FA) is an important indoor pollutant found among volatile organic compounds. This pollutant permeates through the smooth muscle tissue forming covalent bonds between proteins in the extracellular matrix and intracellular protein structure changing mechanical properties of ASM and inducing asthma symptoms, such as airway hyperresponsiveness, even at low concentrations. In the experimental scenario, the mechanical effect of FA is the stiffening of the tissue, but the mechanism behind this effect is not fully understood. Thus, the aim of this study is to reproduce the mechanical behavior of the ASM, such as contraction and stretching, under FA action or not. For this, it was created a two-dimensional viscoelastic network model based on Voronoi tessellation solved using Runge-Kutta method of fourth order. The equilibrium configuration was reached when the forces in different parts of the network were equal. This model simulates the mechanical behavior of ASM through of a network of dashpots and springs. This dashpot-spring mechanical coupling mimics the composition of the actomyosin machinery of ASM through the contraction of springs to a minimum length. We hypothesized that formation of covalent bonds, due to the FA action, can be represented in the model by a simple change in the elastic constant of the springs, while the action of methacholine (MCh) reduce the equilibrium length of the spring. A sigmoid curve of tension as a function of MCh doses was obtained, showing increased tension when the muscle strip was exposed to FA. Our simulations suggest that FA, at a concentration of 0.1 ppm, can affect the elastic properties of the smooth muscle ¯bers by a factor of 120%. We also analyze the dynamic mechanical properties, observing the viscous and elastic behavior of the network. Finally, the proposed model, although simple, incorporates the phenomenology of both MCh and FA and reproduces experimental results observed with in vitro exposure of smooth muscle to FA. Thus, this new mechanical approach incorporates several well know features of the contractile system of the cells in a tissue level model. The model can also be used in different biological scales.

Mechanical alterations in airway smooth muscle after interaction with indoor pollutant - A mathematical model

The viscoelasticity of mammalian lung is determined by the mechanical properties and structural regulation of the airway smooth muscle (ASM). The exposure to polluted air may deteriorate these properties with harmful consequences to individual health. Formaldehyde (FA) is an important indoor pollutant found among volatile organic compounds. This pollutant permeates through the smooth muscle tissue forming covalent bonds between proteins in the extracellular matrix and intracellular protein structure changing mechanical properties of ASM and inducing asthma symptoms, such as airway hyperresponsiveness, even at low concentrations. In the experimental scenario, the mechanical effect of FA is the stiffening of the tissue, but the mechanism behind this effect is not fully w1derstood. Thus, the aim of this study is to reproduce the mechanical behavior of the ASM, such as contraction and stretching, under FA action or not. For this, it was created a two-dimensional viscoelastic network model based on Voronoi tessellation solved using Runge-Kutta method of fourth order. The equilibrium configuration was reached when the forces in different parts of the network were equal. This model simulates the mechanical behavior of ASM through of a network of dashpots and springs. This dashpot-spring mechanical coupling mimics the composition of the actomyosin machinery of ASM through the contraction of springs to a minimum length. We hypothesized that formation of covalent bonds, due to the FA action, can be represented in the model by a simple change in the elastic constant of the springs, while the action of methacholinc (MCh) reduce the equilibrium length of the spring. A sigmoid curve of tension as a function of MCh doses was obtained, showing increased tension when the muscle strip was exposed to FA. Our simulations suggest that FA, at a concentration of 0.1 ppm, can affect the elastic properties of the smooth muscle fibers by a factor of 120%. We also analyze the dynamic mechanical properties, observing the viscous and elastic behavior of the network. Finally, the proposed model, although simple, ir1corporates the phenomenology of both MCh and FA and reproduces experirnental results observed with ir1 vitro exposure of smooth muscle to .FA. Thus, this new mechanical approach incorporates several well know features of the contractile system of the cells ir1 a tissue level model. The model can also be used in different biological scales.

Apple latent infection caused by Neofabraea alba: host-pathogen interaction and disease management

Apple latent infection caused by Neofabraea alba: host-pathogen interaction and disease management Bull’s eye rot (BER) caused by Neofabraea alba is one of the most frequent and damaging latent infection occurring in stored pome fruits worldwide. Fruit infection occurs in the orchard, but disease symptoms appear only 3 months after harvest, during refrigerated storage. In Italy BER is particularly serious for late harvest apple cultivar as ‘Pink Lady™’. The purposes of this thesis were: i) Evaluate the influence of ‘Pink Lady™’ apple primary metabolites in N. alba quiescence ii) Evaluate the influence of pH in five different apple cultivars on BER susceptibility iii) To find out not chemical method to control N. alba infection iv) Identify some fungal volatile compounds in order to use them as N. alba infections markers. Results regarding the role of primary metabolites showed that chlorogenic, quinic and malic acid inhibit N. alba development. The study based on the evaluation of cultivar susceptibility, showed that Granny Smith was the most resistant apple cultivar among the varieties analyzed. Moreover, Granny Smith showed the lowest pH value from harvest until the end of storage, supporting the thesis that ambient pH could be involved in the interaction between N. alba and apple. In order to find out new technologies able to improve lenticel rot management, the application of a non-destructive device for the determination of chlorophyll content was applied. Results showed that fruit with higher chlorophyll content are less susceptible to BER, and molecular analyses comforted this result. Fruits with higher chlorophyll content showed up-regulation of PGIP and HCT, genes involved in plant defence. Through the application of PTR-MS and SPME GC-MS, 25 volatile organic compounds emitted by N. alba were identified. Among them, 16 molecules were identified as potential biomarkers.

Structural response and dynamics of fluid-structure-control interaction in wind turbine blades

Reducing the uncertainties related to blade dynamics by the improvement of the quality of numerical simulations of the fluid structure interaction process is a key for a breakthrough in wind-turbine technology. A fundamental step in that direction is the implementation of aeroelastic models capable of capturing the complex features of innovative prototype blades, so they can be tested at realistic full-scale conditions with a reasonable computational cost. We make use of a code based on a combination of two advanced numerical models implemented in a parallel HPC supercomputer platform: First, a model of the structural response of heterogeneous composite blades, based on a variation of the dimensional reduction technique proposed by Hodges and Yu. This technique has the capacity of reducing the geometrical complexity of the blade section into a stiffness matrix for an equivalent beam. The reduced 1-D strain energy is equivalent to the actual 3-D strain energy in an asymptotic sense, allowing accurate modeling of the blade structure as a 1-D finite-element problem. This substantially reduces the computational effort required to model the structural dynamics at each time step. Second, a novel aerodynamic model based on an advanced implementation of the BEM(Blade ElementMomentum) Theory; where all velocities and forces are re-projected through orthogonal matrices into the instantaneous deformed configuration to fully include the effects of large displacements and rotation of the airfoil sections into the computation of aerodynamic forces. This allows the aerodynamic model to take into account the effects of the complex flexo-torsional deformation that can be captured by the more sophisticated structural model mentioned above. In this thesis we have successfully developed a powerful computational tool for the aeroelastic analysis of wind-turbine blades. Due to the particular features mentioned above in terms of a full representation of the combined modes of deformation of the blade as a complex structural part and their effects on the aerodynamic loads, it constitutes a substantial advancement ahead the state-of-the-art aeroelastic models currently available, like the FAST-Aerodyn suite. In this thesis, we also include the results of several experiments on the NREL-5MW blade, which is widely accepted today as a benchmark blade, together with some modifications intended to explore the capacities of the new code in terms of capturing features on blade-dynamic behavior, which are normally overlooked by the existing aeroelastic models.

Towards a lightweight mobile semantic-based approach for enhancing interaction with smart objects

This work describes a semantic extension for a user-smart object interaction model based on the ECA paradigm (Event-Condition-Action). In this approach, smart objects publish their sensing (event) and action capabilities in the cloud and mobile devices are prepared to retrieve them and act as mediators to configure personalized behaviours for the objects. In this paper, the information handled by this interaction system has been shaped according several semantic models that, together with the integration of an embedded ontological and rule-based reasoner, are exploited in order to (i) automatically detect incompatible ECA rules configurations and to (ii) support complex ECA rules definitions and execution. This semantic extension may significantly improve the management of smart spaces populated with numerous smart objects from mobile personal devices, as it facilitates the configuration of coherent ECA rules.

Introducing usability in a conceptual modeling-based software development process.

Usability plays an important role to satisfy users? needs. There are many recommendations in the HCI literature on how to improve software usability. Our research focuses on such recommendations that affect the system architecture rather than just the interface. However, improving software usability in aspects that affect architecture increases the analyst?s workload and development complexity. This paper proposes a solution based on model-driven development. We propose representing functional usability mechanisms abstractly by means of conceptual primitives. The analyst will use these primitives to incorporate functional usability features at the early stages of the development process. Following the model-driven development paradigm, these features are then automatically transformed into subsequent steps of development, a practice that is hidden from the analyst.

Optimized harvest scheduling in eucalyptus plantations under operational, spatial and climatic constraints

The representation of sustainability concerns in industrial forests management plans, in relation to environmental, social and economic aspects, involve a great amount of details when analyzing and understanding the interaction among these aspects to reduce possible future impacts. At the tactical and operational planning levels, methods based on generic assumptions usually provide non-realistic solutions, impairing the decision making process. This study is aimed at improving current operational harvesting planning techniques, through the development of a mixed integer goal programming model. This allows the evaluation of different scenarios, subject to environmental and supply constraints, increase of operational capacity, and the spatial consequences of dispatching harvest crews to certain distances over the evaluation period. As a result, a set of performance indicators was selected to evaluate all optimal solutions provided to different possible scenarios and combinations of these scenarios, and to compare these outcomes with the real results observed by the mill in the study case area. Results showed that it is possible to elaborate a linear programming model that adequately represents harvesting limitations, production aspects and environmental and supply constraints. The comparison involving the evaluated scenarios and the real observed results showed the advantage of using more holistic approaches and that it is possible to improve the quality of the planning recommendations using linear programming techniques.

Population pharmacokinetic modelling and evaluation of different dosage regimens for darunavir and ritonavir in HIV-infected individuals.

OBJECTIVES: Darunavir is a protease inhibitor that is administered with low-dose ritonavir to enhance its bioavailability. It is prescribed at standard dosage regimens of 600/100 mg twice daily in treatment-experienced patients and 800/100 mg once daily in naive patients. A population pharmacokinetic approach was used to characterize the pharmacokinetics of both drugs and their interaction in a cohort of unselected patients and to compare darunavir exposure expected under alternative dosage regimens. METHODS: The study population included 105 HIV-infected individuals who provided darunavir and ritonavir plasma concentrations. Firstly, a population pharmacokinetic analysis for darunavir and ritonavir was conducted, with inclusion of patients' demographic, clinical and genetic characteristics as potential covariates (NONMEM(®)). Then, the interaction between darunavir and ritonavir was studied while incorporating levels of both drugs into different inhibitory models. Finally, model-based simulations were performed to compare trough concentrations (Cmin) between the recommended dosage regimen and alternative combinations of darunavir and ritonavir. RESULTS: A one-compartment model with first-order absorption adequately characterized darunavir and ritonavir pharmacokinetics. The between-subject variability in both compounds was important [coefficient of variation (CV%) 34% and 47% for darunavir and ritonavir clearance, respectively]. Lopinavir and ritonavir exposure (AUC) affected darunavir clearance, while body weight and darunavir AUC influenced ritonavir elimination. None of the tested genetic variants showed any influence on darunavir or ritonavir pharmacokinetics. The simulations predicted darunavir Cmin much higher than the IC50 thresholds for wild-type and protease inhibitor-resistant HIV-1 strains (55 and 550 ng/mL, respectively) under standard dosing in >98% of experienced and naive patients. Alternative regimens of darunavir/ritonavir 1200/100 or 1200/200 mg once daily also had predicted adequate Cmin (>550 ng/mL) in 84% and 93% of patients, respectively. Reduction of darunavir/ritonavir dosage to 600/50 mg twice daily led to a 23% reduction in average Cmin, still with only 3.8% of patients having concentrations below the IC50 for resistant strains. CONCLUSIONS: The important variability in darunavir and ritonavir pharmacokinetics is poorly explained by clinical covariates and genetic influences. In experienced patients, treatment simplification strategies guided by drug level measurements and adherence monitoring could be proposed.