Mechanisms of convective drying in thick beds of solids

The literature on heat and mass transfer mechanisms in the convective drying of thick beds of solids has been critically reviewed. Related mathematical models of heat transfer are also considered. Experimental and theoretical studies were made of the temperature distribution within beds, and of drying rates, with various materials undergoing convective drying. The experimental work covered thick beds of hygroscopic and non-hygroscopic materials (glass beads of different diameters, polystyrene pellets, activated alumina and wood powder) at air temperatures of 54°C to 84°C. Tests were carried out in a laboratory drying apparatus comprising a wind tunnel through which the air, of controlled temperature and humidity, was passed over a sample suspended from a balance. Thermocouples were inserted at different depths within the sample bed. The temperature distribution profiles for both hygroscopic and non-hygroscopic beds exhibited a clear difference between the temperatures at the surface and bottom during the constant rate period. An effective method was introduced for predicting the critical moisture content. During the falling rate the profiles showed the existence of a receding evaporation plane; this divided the system into a hotter dry zone in the upper section and a wet zone near the bottom. A graphical procedure was established to predict accurately the position of the receding evaporation front at any time. A new mathematical model, based on the receding evaporation front phenomenon, was proposed to predict temperature distributions throughout a bed during drying. Good agreement was obtained when the model was validated by comparing its predictions with experimental data. The model was also able to predict the duration of each drying stage. In experiments using sample trays of different diameters, the drying rate was found to increase with a decrease in the effective length of the bed surface. During the constant rate period with trays of a small effective length, i.e. less than 0.08 m, an 'inversion' in temperature distribution occurred in the bed; the bottom temperature increased and became greater than that of the surface. Experimental measurements were verified in several ways to ensure this phenomenon was real. Theoretical explanations are given for both the effective length and temperature inversion phenomena.

The separation of secondary oil-water dispersions in particulate beds

The literature relating to haze formation, methods of separation, coalescence mechanisms, and models by which droplets <100 μm are collected, coalesced and transferred, have been reviewed with particular reference to particulate bed coalescers. The separation of secondary oil-water dispersions was studied experimentally using packed beds of monosized glass ballotini particles. The variables investigated were superficial velocity, bed depth, particle size, and the phase ratio and drop size distribution of inlet secondary dispersion. A modified pump loop was used to generate secondary dispersions of toluene or Clairsol 350 in water with phase ratios between 0.5-6.0 v/v%.Inlet drop size distributions were determined using a Malvern Particle Size Analyser;effluent, coalesced droplets were sized by photography. Single phase flow pressure drop data were correlated by means of a Carman-Kozeny type equation. Correlations were obtained relating single and two phase pressure drops, as (ΔP2/μc)/ΔP1/μd) = kp Ua Lb dcc dpd Cine A flow equation was derived to correlate the two phase pressure drop data as, ΔP2/(ρcU2) = 8.64*107 [dc/D]-0.27 [L/D]0.71 [dp/D]-0.17 [NRe]1.5 [e1]-0.14 [Cin]0.26  In a comparison between functions to characterise the inlet drop size distributions a modification of the Weibull function provided the best fit of experimental data. The general mean drop diameter was correlated by: q_p q_p p_q /β      Γ ((q-3/β) +1) d qp = d fr  .α        Γ ((P-3/β +1 The measured and predicted mean inlet drop diameters agreed within ±15%. Secondary dispersion separation depends largely upon drop capture within a bed. A theoretical analysis of drop capture mechanisms in this work indicated that indirect interception and London-van der Waal's mechanisms predominate. Mathematical models of dispersed phase concentration m the bed were developed by considering drop motion to be analogous to molecular diffusion.The number of possible channels in a bed was predicted from a model in which the pores comprised randomly-interconnected passage-ways between adjacent packing elements and axial flow occured in cylinders on an equilateral triangular pitch. An expression was derived for length of service channels in a queuing system leading to the prediction of filter coefficients. The insight provided into the mechanisms of drop collection and travel, and the correlations of operating parameters, should assist design of industrial particulate bed coalescers.

Productivity analysis and measurement

The state of the art in productivity measurement and analysis shows a gap between simple methods having little relevance in practice and sophisticated mathematical theory which is unwieldy for strategic and tactical planning purposes, -particularly at company level. An extension is made in this thesis to the method of productivity measurement and analysis based on the concept of added value, appropriate to those companies in which the materials, bought-in parts and services change substantially and a number of plants and inter-related units are involved in providing components for final assembly. Reviews and comparisons of productivity measurement dealing with alternative indices and their problems have been made and appropriate solutions put forward to productivity analysis in general and the added value method in particular. Based on this concept and method, three kinds of computerised models two of them deterministic, called sensitivity analysis and deterministic appraisal, and the third one, stochastic, called risk simulation, have been developed to cope with the planning of productivity and productivity growth with reference to the changes in their component variables, ranging from a single value 'to• a class interval of values of a productivity distribution. The models are designed to be flexible and can be adjusted according to the available computer capacity expected accuracy and 'presentation of the output. The stochastic model is based on the assumption of statistical independence between individual variables and the existence of normality in their probability distributions. The component variables have been forecasted using polynomials of degree four. This model is tested by comparisons of its behaviour with that of mathematical model using real historical data from British Leyland, and the results were satisfactory within acceptable levels of accuracy. Modifications to the model and its statistical treatment have been made as required. The results of applying these measurements and planning models to the British motor vehicle manufacturing companies are presented and discussed.

Income and poverty in a developing economy

We present a stochastic agent-based model for the distribution of personal incomes in a developing economy. We start with the assumption that incomes are determined both by individual labour and by stochastic effects of trading and investment. The income from personal effort alone is distributed about a mean, while the income from trade, which may be positive or negative, is proportional to the trader's income. These assumptions lead to a Langevin model with multiplicative noise, from which we derive a Fokker-Planck (FP) equation for the income probability density function (IPDF) and its variation in time. We find that high earners have a power law income distribution while the low-income groups have a Levy IPDF. Comparing our analysis with the Indian survey data (obtained from the world bank website: http://go.worldbank.org/SWGZB45DN0) taken over many years we obtain a near-perfect data collapse onto our model's equilibrium IPDF. Using survey data to relate the IPDF to actual food consumption we define a poverty index (Sen A. K., Econometrica., 44 (1976) 219; Kakwani N. C., Econometrica, 48 (1980) 437), which is consistent with traditional indices, but independent of an arbitrarily chosen "poverty line" and therefore less susceptible to manipulation. Copyright © EPLA, 2010.

Concepts and methods of quantitative assessment of risk to groundwater resources

This work presents a two-dimensional approach of risk assessment method based on the quantification of the probability of the occurrence of contaminant source terms, as well as the assessment of the resultant impacts. The risk is calculated using Monte Carlo simulation methods whereby synthetic contaminant source terms were generated to the same distribution as historically occurring pollution events or a priori potential probability distribution. The spatial and temporal distributions of the generated contaminant concentrations at pre-defined monitoring points within the aquifer were then simulated from repeated realisations using integrated mathematical models. The number of times when user defined ranges of concentration magnitudes were exceeded is quantified as risk. The utilities of the method were demonstrated using hypothetical scenarios, and the risk of pollution from a number of sources all occurring by chance together was evaluated. The results are presented in the form of charts and spatial maps. The generated risk maps show the risk of pollution at each observation borehole, as well as the trends within the study area. This capability to generate synthetic pollution events from numerous potential sources of pollution based on historical frequency of their occurrence proved to be a great asset to the method, and a large benefit over the contemporary methods.

A Mathematical Apparatus for Domain Ontology Simulation. Logical Relationship Systems

* This paper was made according to the program of fundamental scientific research of the Presidium of the Russian Academy of Sciences «Mathematical simulation and intellectual systems», the project "Theoretical foundation of the intellectual systems based on ontologies for intellectual support of scientific researches".

Continuous property measurement techniques and physics based mathematical model for frost growth control

The development of a new set of frost property measurement techniques to be used in the control of frost growth and defrosting processes in refrigeration systems was investigated. Holographic interferometry and infrared thermometry were used to measure the temperature of the frost-air interface, while a beam element load sensor was used to obtain the weight of a deposited frost layer. The proposed measurement techniques were tested for the cases of natural and forced convection, and the characteristic charts were obtained for a set of operational conditions. ^ An improvement of existing frost growth mathematical models was also investigated. The early stage of frost nucleation was commonly not considered in these models and instead an initial value of layer thickness and porosity was regularly assumed. A nucleation model to obtain the droplet diameter and surface porosity at the end of the early frosting period was developed. The drop-wise early condensation in a cold flat plate under natural convection to a hot (room temperature) and humid air was modeled. A nucleation rate was found, and the relation of heat to mass transfer (Lewis number) was obtained. It was found that the Lewis number was much smaller than unity, which is the standard value usually assumed for most frosting numerical models. The nucleation model was validated against available experimental data for the early nucleation and full growth stages of the frosting process. ^ The combination of frost top temperature and weight variation signals can now be used to control the defrosting timing and the developed early nucleation model can now be used to simulate the entire process of frost growth in any surface material. ^

Mathematical modelling of integrin-like receptors systems

Nel presente lavoro, ho studiato e trovato le soluzioni esatte di un modello matematico applicato ai recettori cellulari della famiglia delle integrine. Nel modello le integrine sono considerate come un sistema a due livelli, attivo e non attivo. Quando le integrine si trovano nello stato inattivo possono diffondere nella membrana, mentre quando si trovano nello stato attivo risultano cristallizzate nella membrana, incapaci di diffondere. La variazione di concentrazione nella superficie cellulare di una sostanza chiamata attivatore dà luogo all’attivazione delle integrine. Inoltre, questi eterodimeri possono legare una molecola inibitrice con funzioni di controllo e regolazione, che chiameremo v, la quale, legandosi al recettore, fa aumentare la produzione della sostanza attizzatrice, che chiameremo u. In questo modo si innesca un meccanismo di retroazione positiva. L’inibitore v regola il meccanismo di produzione di u, ed assume, pertanto, il ruolo di modulatore. Infatti, grazie a questo sistema di fine regolazione il meccanismo di feedback positivo è in grado di autolimitarsi. Si costruisce poi un modello di equazioni differenziali partendo dalle semplici reazioni chimiche coinvolte. Una volta che il sistema di equazioni è impostato, si possono desumere le soluzioni per le concentrazioni dell’inibitore e dell’attivatore per un caso particolare dei parametri. Infine, si può eseguire un test per vedere cosa predice il modello in termini di integrine. Per farlo, ho utilizzato un’attivazione del tipo funzione gradino e l’ho inserita nel sistema, valutando la dinamica dei recettori. Si ottiene in questo modo un risultato in accordo con le previsioni: le integrine legate si trovano soprattutto ai limiti della zona attivata, mentre le integrine libere vengono a mancare nella zona attivata.

Mathematical Modeling of Perifusion Cell Culture Experiments

In perifusion cell cultures, the culture medium flows continuously through a chamber containing immobilized cells and the effluent is collected at the end. In our main applications, gonadotropin releasing hormone (GnRH) or oxytocin is introduced into the chamber as the input. They stimulate the cells to secrete luteinizing hormone (LH), which is collected in the effluent. To relate the effluent LH concentration to the cellular processes producing it, we develop and analyze a mathematical model consisting of coupled partial differential equations describing the intracellular signaling and the movement of substances in the cell chamber. We analyze three different data sets and give cellular mechanisms that explain the data. Our model indicates that two negative feedback loops, one fast and one slow, are needed to explain the data and we give their biological bases. We demonstrate that different LH outcomes in oxytocin and GnRH stimulations might originate from different receptor dynamics. We analyze the model to understand the influence of parameters, like the rate of the medium flow or the fraction collection time, on the experimental outcomes. We investigate how the rate of binding and dissociation of the input hormone to and from its receptor influence its movement down the chamber. Finally, we formulate and analyze simpler models that allow us to predict the distortion of a square pulse due to hormone-receptor interactions and to estimate parameters using perifusion data. We show that in the limit of high binding and dissociation the square pulse moves as a diffusing Gaussian and in this limit the biological parameters can be estimated.

Robust Uncertainty Quantification and Scalable Computation for Computer Models with Massive Output

Uncertainty quantification (UQ) is both an old and new concept. The current novelty lies in the interactions and synthesis of mathematical models, computer experiments, statistics, field/real experiments, and probability theory, with a particular emphasize on the large-scale simulations by computer models. The challenges not only come from the complication of scientific questions, but also from the size of the information. It is the focus in this thesis to provide statistical models that are scalable to massive data produced in computer experiments and real experiments, through fast and robust statistical inference.

Chapter 2 provides a practical approach for simultaneously emulating/approximating massive number of functions, with the application on hazard quantification of Soufri\`{e}re Hills volcano in Montserrate island. Chapter 3 discusses another problem with massive data, in which the number of observations of a function is large. An exact algorithm that is linear in time is developed for the problem of interpolation of Methylation levels. Chapter 4 and Chapter 5 are both about the robust inference of the models. Chapter 4 provides a new criteria robustness parameter estimation criteria and several ways of inference have been shown to satisfy such criteria. Chapter 5 develops a new prior that satisfies some more criteria and is thus proposed to use in practice.

Three Essays on the Economics of Defense Contracting, Output and Income Inequality

This dissertation analyzes both the economics of the defense contracting process and the impact of total dollar obligations on the economies of U.S. states. Using various econometric techniques, I will estimate relationships across individual contracts, state level output, and income inequality. I will achieve this primarily through the use of a dataset on individual contract obligations. The first essay will catalog the distribution of contracts and isolate aspects of the process that contribute to contract dollar obligations. Accordingly, this study describes several characteristics about individual defense contracts, from 1966-2006: (i) the distribution of contract dollar obligations is extremely rightward skewed, (ii) contracts are unevenly distributed in a geographic sense across the United States, (iii) increased duration of a contract by 10 percent is associated with an increase in costs by 4 percent, (iv) competition does not seem to affect dollar obligations in a substantial way, (v) contract pre-payment financing increases the obligation of contracts from anywhere from 62 to 380 percent over non-financed contracts. The second essay will turn to an aggregate focus, and look the impact of defense spending on state economic output. The analysis in chapter two attempts to estimate the state level fiscal multiplier, deploying Difference-in-Differences estimation as an attempt to filter out potential endogeneity bias. Interstate variation in procurement spending facilitates utilization of a natural experiment scenario, focusing on the spike in relative spending in 1982. The state level relative multiplier estimate here is 1.19, and captures the short run, impact effect of the 1982 spending spike. Finally I will look at the relationship between defense contracting and income inequality. Military spending has typically been observed to have a negative relationship with income inequality. The third chapter examines the existence of this relationship, combining data on defense procurement with data on income inequality at the state level, in a longitudinal analysis across the United States. While the estimates do not suggest a significant relationship exists for the income share of the top ten percent of households, there is a significant positive relationship for the income share of top one percent households for an increase in defense procurement.

Implications de l’hétérogénéité comportementale et biologique pour la vaccination contre les virus du papillome humain au niveau de la population : modélisation mathématique, revue systématique et méta-analyse

Objectifs : Dans plusieurs pays la couverture vaccinale contre les virus du papillome humain (VPH) est associée aux déterminants sociaux des comportements sexuels et la participation au dépistage du cancer du col utérin. Ces vaccins protègent uniquement contre certains types de VPH, donc leur impact futur sur les VPH nonvaccinaux demeure incertain. L’hétérogénéité comportementale entre individus et biologique entre types de VPH affectera l’efficacité populationnelle de la vaccination contre les VPH. Les objectifs spécifiques de cette thèse étaient 1) de modéliser comment une couverture vaccinale inégale entre filles préadolescentes qui différeront selon leur activité sexuelle et leur participation au dépistage du cancer du col affectera l’efficacité populationnelle de la vaccination, 2) faire une synthèse et comparer les estimés d’efficacité croisée des vaccins contre les VPH dans des populations ADN-négatives aux VPH et 3) d’identifier, avec la modélisation, les devis d’étude épidémiologique qui réduisent les biais dans l’estimation des interactions biologiques entre types de VPH. Méthode : Nous avons utilisé des modèles de transmission dynamique et une revue systématique de la littérature pour répondre aux objectifs. 1) Nous avons modélisé une couverture vaccinale inégale entre filles qui différeront selon leur activité sexuelle et leur participation au dépistage, et examiné les changements postvaccination dans l’inégalité dans la prévalence des VPH et l’incidence des carcinomes malpighien (SCC) du col de l’utérus entre femmes ayant différents comportements. 2) Nous avons effectué une revue systématique et méta-analyse des efficacités croisées des vaccins contre les VPH estimées dans des populations ADNnégatives aux VPH. 3) Nous avons développé des modèles de transmission dynamique et d’interaction de deux types de VPH pour simuler les études épidémiologiques d’interactions entre les VPH. Résultats : Pour l’objectif 1), notre modèle de transmission prédit que l’efficacité populationnelle du vaccin dépendra de la distribution du vaccin dans la population. Après la vaccination, les inégalités absolues dans l’incidence de l’infection et des SCC entre groupes de femmes qui diffèrent selon leur activité sexuelle et leur participation au dépistage devraient diminuer. Inversement, les inégalités relatives pourraient augmenter si les femmes plus sexuellement actives et celles qui ne se font jamais dépister ont une couverture vaccinale moins élevée que les autres. Le taux d’incidence des SCC demeurera élevé chez les femmes qui ne sont jamais dépistées après la vaccination. L’efficacité croisée vaccinale et les interactions biologiques entre VPH ne sont pas encore assez bien caractérisées pour pouvoir prédire l’impact du vaccin sur les types de VPH nonvaccinaux. Pour l’objectif 2), notre méta-analyse des essais cliniques des vaccins suggère que le vaccin bivalent a une efficacité croisée significativement plus élevée que le quadrivalent contre les infections persistantes et lésions précancéreuses avec les VPH-31, 33 et 45. Les essais cliniques plus longs estiment une efficacité croisée plus faible. La modélisation des études épidémiologiques d’interactions pour l’objectif 3) montre que l’estimation des interactions biologiques entre types de VPH dans les études épidémiologiques est systématiquement biaisée par la corrélation entre le temps à risque d’infection avec un type de VPH et le temps à risque d’infection avec d’autres types de VPH. L’ajustement pour des marqueurs d’activité sexuelle ne réussit pas à contrôler ce biais. Une mesure valide des interactions biologiques entre types de VPH peut être obtenue uniquement avec des études épidémiologiques prospectives qui restreignent les analyses à des individus susceptibles ayant des partenaires sexuels infectés. Conclusion : L’hétérogénéité comportementale entre individus et l’hétérogénéité biologique entre VPH affecteront l’efficacité populationnelle du vaccin contre les VPH. Dans les contextes où les déterminants sociaux des comportements sexuels et la participation au dépistage sont aussi associés à la couverture vaccinale chez les préadolescentes, l’inégalité relative dans l’incidence des SCC risque d’augmenter. Ces comportements demeureront des facteurs de risque importants du cancer du col à l’avenir. L’effet à long terme du vaccin sur les types de VPH non-vaccinaux demeure incertain. Quoique nos résultats suggèrent que les vaccins offrent une efficacité croisée contre certains types de VPH, celle-ci pourrait diminuer après quelques années. Des interactions compétitives entre VPH pourraient exister malgré les associations observées entre les incidences des infections VPH, donc une augmentation post-vaccination de la prévalence des VPH non-vaccinaux demeure possible. Des devis d’analyse plus complexes sont nécessaires pour mesurer de façon valide les interactions biologiques entre les VPH dans les études épidémiologiques.

Stochastic Modeling of Reversible Biochemical Reaction-Diffusion Systems and High-Resolution Shock-Capturing Methods for Fluid Interfaces

Thesis (Ph.D.)--University of Washington, 2016-08

The use of mathematical modelling in fire safety engineering

Fire is a form of uncontrolled combustion which generates heat, smoke, toxic and irritant gases. All of these products are harmful to man and account for the heavy annual cost of 800 lives and £1,000,000,000 worth of property damage in Britain alone. The new discipline of Fire Safety Engineering has developed as a means of reducing these unacceptable losses. One of the main tools of Fire Safety Engineering is the mathematical model and over the past 15 years a number of mathematical models have emerged to cater for the needs of this discipline. Part of the difficulty faced by the Fire Safety Engineer is the selection of the most appropriate modelling tool to use for the job. To make an informed choice it is essential to have a good understanding of the various modelling approaches, their capabilities and limitations. In this paper some of the fundamental modelling tools used to predict fire and evacuation are investigated as are the issues associated with their use and recent developments in modelling technology.

Impact populationnel de la vaccination contre les virus du papillome humain : revue systématique et synthèse des prédictions de 16 modèles mathématiques dynamiques

Introduction: En 2015, 65 pays avaient des programmes de vaccination contre les VPH. La modélisation mathématique a joué un rôle crucial dans leur implantation. Objectifs: Nous avons réalisé une revue systématique et analysé les prédictions de modèles mathématiques de l’efficacité populationnelle de la vaccination sur la prévalence des VPH-16/18/6/11 chez les femmes et les hommes, afin d’évaluer la robustesse/variabilité des prédictions concernant l’immunité de groupe, le bénéfice ajouté par la vaccination des garçons et l’élimination potentielle des VPH-16/18/6/11. Méthodes: Nous avons cherché dans Medline/Embase afin d’identifier les modèles dynamiques simulant l’impact populationnel de la vaccination sur les infections par les VPH-16/18/6/11 chez les femmes et les hommes. Les équipes participantes ont réalisé des prédictions pour 19 simulations standardisées. Nous avons calculé la réduction relative de la prévalence (RRprev) 70 ans après l’introduction de la vaccination. Les résultats présentés correspondent à la médiane(10ème;90èmeperccentiles) des prédictions. Les cibles de la vaccination étaient les filles seulement ou les filles & garçons. Résultats: 16/19 équipes éligibles ont transmis leurs prédictions. Lorsque 40% des filles sont vaccinées, la RRprev du VPH-16 est 53%(46%;68%) chez les femmes et 36%(28%;61%) chez les hommes. Lorsque 80% des filles sont vaccinées, la RRprev est 93%(90%;100%) chez les femmes et 83%(75%;100%) chez les hommes. Vacciner aussi les garçons augmente la RRprev de 18%(13%;32%) chez les femmes et 35%(27%;39%) chez les hommes à 40% de couverture, et 7%(0%;10%) et 16%(1%;25%) à 80% de couverture. Les RRprev étaient plus élevées pour les VPH-18/6/11 (vs. VPH-16). Si 80% des filles & garçons sont vaccinés, les VPH-16/18/6/11 pourraient être éliminés. Interprétation: Même si les modèles diffèrent entre eux, les prédictions s’accordent sur: 1)immunité de groupe élevée même à basse couverture, 2)RRprev supérieures pour les VPH-18/6/11 (vs. VPH-16), 3)augmenter la couverture chez les filles a un meilleur impact qu’ajouter les garçons, 4)vacciner 80% des filles & garçons pourraient éliminer les VPH-16/18/6/11.