Síntese e impregnação de peneiras moleculares Fe MCM-41 derivada de sílica da casca do arroz

The mesoporous molecular sieves of the MCM-41 and FeMCM-41 type are considered promissory as support for metals used as catalysts in oil-based materials refine processes and as adsorbents for environmental protection proposes. In this work MCM-41 and FeMCM41 were synthesized using rice husk ash - RHA as alternative to the conventional silica source. Hydrothermal synthesis was the method chosen to prepare the materials. Pre-defined synthesis parameters were 100°C for 168 hours, later the precursor was calcinated at 550°C for 2 hours under nitrogen and air flow. The sieves containing different proportions of iron were produced by two routes: introduction of iron salt direct synthesis; and a modification post synthesis consisting in iron salt 1 % and 5% impregnation in the material followed by thermal decomposition. The molecular sieves were characterized by X ray diffraction XRD, Fourier transform infrared spectroscopy FT-IR, X ray fluorescence spectroscopy XFR, scanning electronic microscopy SEM, specific surface area using the BET method, Termogravimetry TG. The kinetic model of Flynn Wall was used with the aim of determining the apparent activation energy of the surfactant remove (CTMABr) in the MCM- 41 porous. The analysis made possible the morphology characterization, identifying the presence of hexagonal structure typical for mesoporous materials, as well as observation of the MCM41 and iron of characteristic bands.

Efeito da adição de feldspato e/ou resíduo de caulin em formulações à base de argila ilítica

The red pottery industry in Piauí state is well developed and stands out at the national context for the technical quality of its products. The floor and wall tile industry, however, is little developed since the state has only one company that produces red clay-based ceramic tiles. This thesis aims at using the predominantly illitic basic mass of the above mentioned industry, with the addition of feldspar and/or kaolin residue in order to obtain products of higher technical quality. Kaolin residue consists basically of kaolinite, muscovite mica and quartz; the feldspar used was potassic. In this experiment, basic mass (MB) was used for experimental control and fifteen formulations codified as follows: F2, F4, F8, F16, F32, FR2, FR4, FR8, FR16, FR32, R2, R4, R8, R16 and R32. All raw materials were dry-milled, classified, formulated and then humidified to 10% water. Thereafter, test samples were produced by unixial pressing process in a rectangular steel matrix (60.0 x 20.0 x 5.0) mm3 at (25 MPa). They were fired at four temperatures: 1080°C, 1120°C, 1160°C, with a heating rate of 10°C/min during up to 10 min in an electric oven, and the last one in an industrial oven with a peak of 1140°C, aim ing to confirm the results found in laboratory and, finally, technological tests were performed: MEA, RL, AA, PA, TRF and PF. The results revealed that the residue under study can be considered a raw material with large potential in the industry of red clay-based ceramic tiles, since the results found both in laboratory and in the industry have shown that the test samples produced from the formulations with up to 4% feldspar and those produced with up to 8% feldspar and residue permitted a reduction in the water absorption rate and an increase in the mechanical resistance while those samples produced with up to 4% residue had an increase in the mechanical resistance when compared to those produced from the basic mass and that the formulation with 2% feldspar and residue presented the best technological properties, lowering the sintering temperature down to 1120°C

Adição de resíduo cerâmico em pastas geopoliméricas para cimentação de poços de petróleo

The development of activities the of oil and gas sector have promoted the search for suitable materials for cementing oil wells. In the state of the Rio Grande do Norte, the integrity of the cement sheath tends to be impaired during steam injection, a procedure necessary to increase oil recovery in reservoirs with low-viscosity oil. The geopolymer is a material that can be used as alternative cement, since it has been used in the production of fire-resistant components, building structures, and for the control of toxic or radioactive residues. Geopolymers result from condensation polymer alkali aluminosilicates and silicates resulting three-dimensional polymeric structures. They are produced in a manner different from that of Portland cement, which is made an activating solution that is mixed with geopolymer precursor. Among the few works studied allowed us to conclude that the pastes prepared with metakaolin as precursor showed better performance of its properties. Several studies show the addition of waste clay as a means of reducing cost and improving end of the folder properties. On this basis, the goal is to study the influence of the addition of ceramic waste in geopolymer paste. To develop the study of rheology tests were carried out, filtered, thickening time, compressive strength, free water, specific gravity and permeability, according to the American Pretoleum Institute (API). The results for all formulations studied show that the folders have high mechanical strength to a light paste; low filtrate volume, absence of free water, very low permeability, slurry, consistent with a light paste, and thickening time low that can be corrected with the use of a retardant handle. For morphological characterization, microstructural, physical, chemical and thermal tests were carried out by XRD, MEV, DTA, TG, FTIR. In the trial of XRD, it was found that geopolymer is an amorphous material, with a peak of crystalline kaolinite. In tests of TG / DTA, revealed the presence of a significant event, which represents the mass loss related to water, and also observed the reduction of weight loss by increasing the concentration of ceramic waste. In the trial of MEV, we found a uniform matrix without the presence of other phases. In the trial of FT-IR, we observed the presence of the band related to water. From all results it was determined that the optimum concentration range of use is between 2.5 and 5% of waste ceramic

Produção de fibras de alumina biomórfica a partir do sisal

Sisal is a renewable agricultural resource adapted to the hostile climatic and soil conditions particularly encountered in the semi-arid areas of the state of Rio Grande do Norte. Consequently, sisal has played a strategic role in the economy of the region, as one of few options of income available in the semi-arid. Find new options and adding value to products manufactured from sisal are goals that contribute not only to the scientific and technological development of the Northeastern region, but also to the increase of the family income for people that live in the semi-arid areas where sisal is grown. Lignocellulosic fibers are extracted from sisal and commonly used to produce both handcrafted and industrial goods including ropes, mats and carpets. Alternatively, addedvalue products can be made using sisal to produce alumina fibers (Al2O3) by biotemplating, which consists in the reproduction of the natural fiber-like structure of the starting material. The objective of this study was to evaluate the conditions necessary to convert sisal into alumina fibers by biotemplating. Alumina fibers were obtaining after pretreating sisal fibers and infiltrating them with a Al2Cl6 saturated solution, alumina sol from aluminum isopropoxide or aluminum gas. Heat-treating temperatures varied from 1200 ºC to 1650 °C. The resulting fibers were then characterized by X-ray diffraction and scanning electronic microscopy. Fibers obtained by liquid infiltration revealed conversion only of the surface of the fiber into α-Al2O3, which yielded limited resistance to handling. Gas infiltration resulted in stronger fibers with better reproduction of the inner structure of the original fiber. All converted fibers consisted of 100% α-Al2O3 suggesting a wide range of technological applications especially those that require thermal isolation

Síntese de nanopartículas de magnetita via decomposição térmica em meio não-aquoso

This work aims at obtaining nanoparticles of iron oxide, the magnetite one (Fe3O4), via synthesis by thermal decomposition through polyol. Thus, two routes were evaluated: a simple decomposition route assisted by reflux and a hydrothermal route both without synthetic air atmosphere using a synthesis temperature of 260ºC. In this work observed the influence of the observe of surfactants which are generally applied in the synthesis of iron oxide nanoparticles decreasing cluster areas. Further, was observed pure magnetite phase without secondary phases generally found in the iron oxide synthesis, a better control of crystallite size, morphology, crystal structure and magnetic behavior. Finally, the introduction of hydroxyl groups on the nanoparticles surface was analyzed besides its employment in the polymer production with OH radicals. The obtained materials were characterized by XRD, DLS, VSM, TEM, TG and DSC analyses. The results for the magnetite obtainment with a particle size greater than 5 nm and smaller than 11 nm, well defined morphology and good magnetic properties with superparamagnetic behavior. The reflux synthesis was more efficient in the deposition of the hydroxyl groups on the nanoparticles surface

Aproveitamento de resíduo de beneficiamento do caulim na produção de porcelanato cerâmico

Nowadays, industries from all sectors have great concerns over the disposition of the residues generated along the productive process. This is not different in the mineral sector, as this generates great volumes of residues. It was verified that the kaolin improvement industry generates great volumes of residue basically constituted of kaolinite, muscovite mica and quartz, which are basic constitution elements to formularisations of ceramics masses to the production of covering of stoneware tiles type. This happens because the methodology applied to the improvement process is still very rudimentary, what causes a very low yield, only ¼ from all the material volume that enters the improvement process, in the end, is marketable. The disposal of this residue, in a general way, causes a very big negative environmental impact, what has justified the researches efforts aiming to find a rational solution to this problem. In this way, the intention of this present work is the utilization of this residue in the manufacture of products to high quality ceramics covering, stoneware tiles in an industrial scale. For this purpose, the influence of the addition of the residue to a standard ceramics mass used by a ceramics sector company, already established in the market, with the intention of verifying the possibility of use of this residue as the mass complementary raw material and even the possible partial or total substitution of one of the components of the mass for the raw material in evidence will be studied. To the accomplishment of this work, the kaolin improvement residue generated by an industry of exploitation and improvement of kaolin, located in the region of Equador-RN, in the levels 1,2,4,8, 16 and 32% will be added to the standard mass already used for the production of stoneware tiles. The raw materials used, kaolin residue and the standard mass, were characterized through DRX, FRX, DTA, TGA and dilatometry. After the sintering of the bodies of test, tests of water absorption, apparent porosity, post burning linear retraction, apparent specific mass and flexural strength (3 point bending) were realized to determinate the technological properties of these materials. The results show the studied residue can be considered raw material of great potential to the industry of floor and ceramics covering of the stoneware tiles type

Estudo genético-clínico de mucopolissariodoses no estado do Ceará

As mucopolissacaridoses (MPS) são doenças genéticas raras decorrente da deficiência de enzimas lisossomais envolvidas no catabolismo de glicosaminoglicanos, resultando em um amplo espectro de manifestações clínicas, progressivas e multissistêmicas, exigindo tratamento por uma equipe multidisciplinar. Embora o Nordeste brasileiro seja uma região com grande taxa de consangüinidade e um efeito fundador envolvendo MPS, não há estudos caracterizando os pacientes dessa região. Nosso objetivo foi determinar o perfil epidemiológico, clínico e genético de casos não publicados com MPS provenientes do Ceará, identificando as diferenças entre outros estudos com MPS e possíveis problemas a serem enfrentados para a realização do diagnóstico precoce. O estudo foi seccional, descritivo, com amostra de pacientes com MPS em acompanhamento no Hospital Infantil Albert Sabin e Hospital Geral Cesar Cals no período de 2006-2013. Os dados foram obtidos a partir da avaliação clínica, revisão de prontuários médicos e entrevista com os pacientes e/ou familiares realizadas pelo investigador principal. Cinquenta e três pacientes foram incluídos no estudo (36 do sexo masculino), sendo 6 MPS I, 17 MPS II, 7 MPS III (3 MPSIII-A, 3 MPS III-B, 1 MPS III-C), 7 MPS IV-A, 16 de MPS VI. O óbito ocorreu em 16 casos (3 MPS I, MPS II 6, 1 MPS IIIA , IIIB 1MPS , 1 MPS IV , 4 MPS VI). A amostra foi composta principalmente por crianças. Houve elevada taxa de consangüinidade e recorrência familiar. Os tipos mais comuns foram MPS II e MPS VI. Exceto para macrossomia em MPS II, os dados de nascimento indicam que não houve risco para desenvolvimento de viii complicações perinatais. Os sintomas iniciaram em crianças com menos de 2 anos. As manifestações clínicas foram heterogêneas exceto para atraso no desenvolvimento neurológico em MPS III e manifestações esqueléticas em MPS IV. As principais características clínicas foram macrocefalia, baixa estatura, alterações odontológicas, respiratórias, cardíacas, hepatoesplenomegalia, hérnia umbilical, rigidez articular e anormalidades esqueléticas. A terapia de reposição enzimática foi instituída em 26 casos (4 MPS I, 10 MPS II, 12 MPS VI). Os problemas sócio-econômicos das famílias, o amplo espectro de sintomas e a gravidade da doença foram causas das dificuldades em realizar a avaliação periódica pela equipe multidisciplinar, além de exames complementares de maior custo para determinar as complicações da doença. Este foi o maior estudo transversal sobre MPS no Nordeste do Brasil. Em contraste com a maior incidência de MPS I na maioria das populações ocidentais, houve maior incidência de MPS II e VI. As alterações respiratórias foram um dos principais contribuintes para a mortalidade precoce, exceto nos casos de MPS I, em que a cardiomiopatia foi prevalente. A menor expectativa de vida ocorreu em MPS I. O envolvimento cognitivo foi comum em casos graves e o maior número de órgãos envolvidos representou maior risco de morrer. Para o diagnóstico precoce, deve-se buscar indivíduos afetados em famílias em que há parentes com MPS, além do maior reconhecimento de sinais e sintomas de MPS por profissionais de saúde

Um divagar pouco atraente: o tema das raças em Os Sertões de Euclides da Cunha

Os Sertões of Euclides da Cunha is one of the most studied books of Brazilian social thought, with approaches ranging from literature to geology, mobilizing concepts and theoretical and disciplinary perspectives the most diverse. This work aims to identify the process of building the concept of race by Euclides da Cunha in this work. To achieve this goal, will be studied, at first, the process of intellectual and political formation of Euclides da Cunha in the years prior to his trip to Canudos, in order to identify the presence of themes and authors in their thinking, using for this purpose, as the main source, your correspondence and press articles, which are expressed in the basic references of his training and dialogue on topics and authors that permeated their way of thinking about the Brazilian reality in the late nineteenth century and early twentieth century. In the second stage of labor, with reference to the study of the presence of several theories that explain human behavior from racial lines, with a strong Brazilian influence in the intellectual environment of the late nineteenth century, an analytical effort will be made in order to understand the synthesis made specific by Euclides da Cunha in the preparation of his work, to identify the main authors based their thinking on this aspect of the changes in your way of thinking about the man of the interior in an attempt to understand how the concept this race is in the interpretation of the conflict happened in Canudos and action of some of her protagonists

Gestão da qualidade total: introdução dos conceitos e a sua utilização em um curso para abordar o comportamento individual do aluno/profissional/cidadão

A introdução do assunto qualidade, segundo as necessidades de mercado abre espaço para a discussão da qualidade como necessidade pessoal, e também para a formação do cidadão/profissional, além de introduzir assuntos específicos de administração de empresas. Dessa forma, foi oferecida uma disciplina optativa para os alunos do Instituto de Química do Campus de Araraquara, abordando o tema Qualidade e foi denominada Gestão da Qualidade por três anos seguidos. da avaliação geral do curso extraiu-se que ele deveria ser realizado sempre, que o tema é atual e relevante e contribui para a formação profissional/pessoal. Com relação ao comprometimento com o curso de graduação, cerca de metade dos alunos assume o seu comprometimento com os estudos e os restantes dizem estarem somente envolvidos. Conclui-se, portanto que o curso atingiu os seus objetivos propostos, introduziu os principais conceitos de qualidade segundo as normas da qualidade da série ISO 9000 e suscitou a discussão da formação do aluno/profissional/cidadão.

Contribuição ao estudo da interrelação flúor-manganês em ratos

Devido a numerosas discrepâncias nos resultados de estudos experimentais relativos à interação flúor-manganês, propusemo-nos a verificar se a adição de manganês 5 água fluoretada (1 ppm), em diferentes proporções fluor-manganês, levaria a uma diferente fixaçao do halogênio. Para tanto, 24 ratos Wistar, recém-desmamados, foram mantidos em dieta padrão de caseína a 27%, recebendo na sua água de consumo: 1) H2O destilada (controle); 2) 1,0 ppm de flúor: 3) 1,0 ppm de flúor + 0,5 ppm de manganês (F:Mn = 2,0); 4) 1,0 ppm de flúor +1,0 ppm de manganês (F: Mn = 1,0). Foram anotados o peso ganho e o consumo de alimento e água, durante os 60 dias de experimento, após o qual as patas traseiras, dos animais sacrificados, foram autoclavadas e desossadas, e os femures retirados. Posteriormente, foram estes submetidos à secagem, extração da gordura, pulverização e analise do flúor fixado. Também foram efetuadas analises da composição centesimal da ração e de flúor e manganês nesta e nas diferentes águas de consumo. Os resultados de percentagem do flúor ingerido fixado nos femures, foram analisados estatisticamente pelo teste não-paramétrico de Kruskal-Wallis (níveis de 1% e 5%) mostrando que, para as proporções consideradas, o flúor na taxa de 1 ppm, o manganês, quando administrado após o desmame, parece não afetar a fixaçao do flúor. Contudo, faz-se necessário dar continuidade aos estudos com novas proporções e taxas mais elevadas de flúor e manganês.

Os significados de ludoterapia para as protagonistas do processo: crianças em atendimento

The ludic therapy in a Phenomenological-Existential perspective is conceived as a psychotherapeutic process in which, the listening and talking, mediated by playing activities, allow the child to deal with their grief/suffering. This study is based on the need to broaden the understanding of this modality of clinical intervention by emphasizing the speech of the protagonists in the process: children in therapy. The objective was to understand the ludic therapy from the children s perspective, knowing the meanings assigned to the therapeutic process, to the psychologist and to the involvement of the children in clinical consultations. The main ideas that underlie this research are presented in three theoretical chapters covering, respectively, the suffering of children and the demand for psychotherapy, the Phenomenological-Existential clinical psychology, and the psychotherapy for children, in Brazil, under this theoretical-methodological approach. The study was qualitative, on a phenomenological basis, and included six children as participants, aged between six and ten years, undergoing ludic therapy for at least six months, and referred by their own therapists. In the research s corpus construction, individual meetings were held and mediated by tools to support expressiveness (ludic and pictures/figures boxes), added by the storytelling of an incomplete story about a child s visit to the therapy session, and the request for the elaboration of a message to be passed to a child who will go to see a psychologist. The analysis of the data was based on a variant of the phenomenological method proposed by Amedeo Giorgi. The results reveal a lack of knowledge by the children about the psychologist s activities. Thus, the children develop fantasies about this intervention modality because of lack of information. These observations are consistent with the historical meanings assigned to clinical psychology, involving ideas of normality and guilt. The meanings associated with the motives for a referral to a psychologist highlight the conflict "be a problem versus having a problem" and an elitist conception of clinical psychology. Children understand the characteristics of the therapeutic process, such as the specifics of the therapist-client relationship and the notion of freedom. They also demonstrate remarkable pleasure in the therapeutic process. Finally, it was concluded that the meanings attributed to the ludic therapy by the children are consistent with that proposed in the literature about the children s psychotherapy process in the Phenomenological-Existential perspective. Moreover, the relevance of both the children s experience in the therapeutic setting and the meanings of these proceedings understood by the children are highlighted by the listening to the protagonists in the ludic therapeutic process. The comprehension of these aspects and their transference from the clients experience to the reflective field, promote advances in the understanding of child psychotherapy and indicate the need for further studies with children using this approach.

Estudo da regeneração de aditivos para catalisadores de craqueamento aluminofosfatos (ALPO s)e silicoaluminofosfatos (SAPO s)

Heterogeneous catalysts such as aluminophosphate and silicoaluminophosphate, molecular sieves with AEL of ALPO-11 and SAPO-11, were synthesized by the hydrothermal method with the following molar composition: 2.9 Al +3.2 P + 3.5 DIPA +32.5 H20 (ALPO-11); 2.9 Al +3.2 P + 0.5 Si + 3.5 DIPA +32.5 H20 (SAPO-11) starting from silica (only in the SAPO-11), pseudoboehmite, orthophosphoric acid (85%) and water, in the presence of a di-isopropylamine organic template. The crystallization process occurred when the reactive hydrogel was charged into a vessel and autoclaved at 170ºC for a period of 48 hours under autogeneous pressure. The obtained materials were washed, dried and calcined to remove the molecular sieves of DIPA. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), infrared spectroscopy (FT-IR), thermo gravimetric differential thermal analysis (TG/DTA) and nitrogen adsorption (BET). The acidic properties were determined using adsorption of n-butylamine followed by programmed thermodessorption. This method revealed that ALPO-11 has weaker acid sites due to structural defects, while SAPO-11 shows an acidity that ranges from weak to moderate. However, a small quantity of strong acid sites could be detected there. The deactivation of the catalysts was conducted by the cracking of the n-hexane in a fixed bed continuous flow microrreator coupled on line to a gas chromatograph. The main products obtained were: ethane, propane, isobutene, n-butane, n-pentane and isopentane. The Vyazovkin (model-free) kinetics method was used to determine the regeneration and removal of the organic template

Sarcopenia da caquexia reumatoide: conceituação, mecanismos, consequências clínicas e tratamentos possíveis

A caquexia relacionada à artrite reumatoide é conceituada como perda involuntária de massa magra, predominantemente de músculo esquelético, que também ocorre em vísceras e sistema imune, com massa gorda estável ou um pouco elevada e com pequena ou nenhuma perda de peso. A causa é multifatorial, incluindo a produção acentuada de citocinas, principalmente TNF± e IL-1², diminuição da ação periférica da insulina e pouca atividade física. A caquexia se faz presente em doentes com AR ativa ou mesmo inativa. Neste artigo discutem-se aspectos relacionados à patogenia, implicações clínicas e possíveis opções terapêuticas.

Reações ácido-base: conceito, representação e generalização a partir das energias envolvidas nas transformações

Undergraduate students on the first year of Chemistry Courses are unfamiliar with the representation of acid-base reactions using the ionic equation H+ + OH- → H2O. A chemistry class was proposed about acid-base reactions using theory and experimental evaluation of neutralization heat to discuss the energy involved when water is formed from H+ and OH- ions. The experiment is suggested using different strong acids and strong base pairs. The presentation of the theme within a chemistry class for high school teachers increased the number of individuals that saw the acid-base reaction from this perspective.