Herbivores strongly influence algal recruitment in both coral- and algal-dominated coral reef habitats

Coral reefs can exist as coral- and macroalgae-dominated habitats often separated by only a few hundred metres. While herbivorous fish are known to depress the abundance of algae and help maintain the function of coral-dominated habitats, less is known about their influence in algae-dominated habitats. Here, we quantified herbivorous fish and benthic algal communities over a 6 mo period in coral-dominated (back-reef) and algal-dominated (lagoon) habitats in a relatively undisturbed fringing coral reef (Ningaloo, Western Australia). Simulta - neously, we tested the effects of herbivorous fish on algal recruitment in both habitats using recruitment tiles and fish exclusion cages. The composition of established algal communities differed consistently between habitats, with the back-reef hosting a more diverse community than the Sargassum-dominated lagoon. However, total algal biomass and cover only differed between habitats in autumn, coinciding with maximum Sargassum biomass. The back-reef hosted high coral cover and a diverse herbivorous fish community, with herbivore biomass an order of magnitude greater than the lagoon. Despite these differences in herbivore composition, exclusion of large herbivores had a similar positive effect to foliose macroalgae recruitment on experimental tiles in both back-reef and lagoon habitats. Additionally, territorial damselfish found in the backreef increased turf algae cover and decreased crustose coralline algae cover on recruitment tiles. Collectively, our results show that disparate herbivorous fish communities in coral- and algaedominated habitats are similarly able to limit the recruitment of foliose macroalgae, but suggest that when herbivorous fish biomass and diversity are relatively low, macroalgal communities are able to escape herbivore control through increased growth.

5 Sentidos

5 Sentidos es un restaurante que se crea a partir de las expectativas que tienen las personas de encontrar un lugar novedoso, diferente y divertido, salido de lo común. Es un lugar fusión que contempla tanto de la gastronomía moderna como la clásica, donde se da cabida al público de experimentar el uso de todos sus sentidos en un recinto bañado de sorpresas desde el momento de cruzar la puerta, dando acogida a un gran sector demográfico el cual consideraba que no podía acceder a un sitio como este, para probar la magia culinaria que allí se ofrece. 5 Sentidos se aleja de la formalidad y elegancia de un sitio que se caracteriza por la comida que allí se ofrece para dar paso a la informalidad, donde las personas que allí acuden, son grupos de amigos o familiares que buscan encontrar un lugar casual y relajado. 5 Sentidos pretende inspirar a esas personas que consideran que hay cosas imposibles tanto de crear como de imaginar, para que se lancen a crear, hacer, construir; no construyan sueños, hagan sus sueños realidad.

Viabilidad Hotel Bosques de Araguaney

El Hotel Bosques de Araguaney es un proyecto de largo plazo que busca promover y consolidar el desarrollo de la región de Puerto Gaitán y del Meta, gracias a las grandes rentas que se han generado en la región por motivo de su riqueza en recursos naturales. Como su nombre lo indica este proyecto se encuentra segmentado en la prestación de servicios de alojamiento, conteniendo otros servicios como la prestación de servicios de restaurante.

El papel de la FIFA en la soberanía del Estado. Una aproximación a la relación entre actores y sujetos del derecho internacional en la copa del mundo de fútbol Sudáfrica 2010

Este estudio de caso se realiza con el ánimo de analizar las relaciones de la actividad de la FIFA con la soberanía del Estado, teniendo como objeto de estudio principal la Copa del Mundo Sudáfrica 2010. Asimismo, se busca analizar el papel y categorización de la FIFA, tanto en las relaciones internacionales, como en el derecho internacional. Para tal fin, a lo largo del trabajo se procederá a exponer los principales aspectos en las relaciones entre actores no tradicionales y los Estados soberanos, se identificará la conexión existente entre la FIFA y el Soft Law. Por último, se describirán las acciones concretas que realizó la FIFA que de alguna manera afectaron la soberanía sudafricana.

Nanofibrous-structured polymers and their engineering applications

Monolithic materials cannot always satisfy the demands of today’s advanced requirements. Only by combining several materials at different length-scales, as nature does, the requested performances can be met. Polymer nanocomposites are intended to overcome the common drawbacks of pristine polymers, with a multidisciplinary collaboration of material science with chemistry, engineering, and nanotechnology. These materials are an active combination of polymers and nanomaterials, where at least one phase lies in the nanometer range. By mimicking nature’s materials is possible to develop new nanocomposites for structural applications demanding combinations of strength and toughness. In this perspective, nanofibers obtained by electrospinning have been increasingly adopted in the last decade to improve the fracture toughness of Fiber Reinforced Plastic (FRP) laminates. Although nanofibers have already found applications in various fields, their widespread introduction in the industrial context is still a long way to go. This thesis aims to develop methodologies and models able to predict the behaviour of nanofibrous-reinforced polymers, paving the way for their practical engineering applications. It consists of two main parts. The first one investigates the mechanisms that act at the nanoscale, systematically evaluating the mechanical properties of both the nanofibrous reinforcement phase (Chapter 1) and hosting polymeric matrix (Chapter 2). The second part deals with the implementation of different types of nanofibers for novel pioneering applications, trying to combine the well-known fracture toughness enhancement in composite laminates with improving other mechanical properties or including novel functionalities. Chapter 3 reports the development of novel adhesive carriers made of nylon 6,6 nanofibrous mats to increase the fracture toughness of epoxy-bonded joints. In Chapter 4, recently developed rubbery nanofibers are used to enhance the damping properties of unidirectional carbon fiber laminates. Lastly, in Chapter 5, a novel self-sensing composite laminate capable of detecting impacts on its surface using PVDF-TrFE piezoelectric nanofibers is presented.

Employment of Real-Time/FPGA Architectures for Test and Control of Automotive Engines

Nowadays the production of increasingly complex and electrified vehicles requires the implementation of new control and monitoring systems. This reason, together with the tendency of moving rapidly from the test bench to the vehicle, leads to a landscape that requires the development of embedded hardware and software to face the application effectively and efficiently. The development of application-based software on real-time/FPGA hardware could be a good answer for these challenges: FPGA grants parallel low-level and high-speed calculation/timing, while the Real-Time processor can handle high-level calculation layers, logging and communication functions with determinism. Thanks to the software flexibility and small dimensions, these architectures can find a perfect collocation as engine RCP (Rapid Control Prototyping) units and as smart data logger/analyser, both for test bench and on vehicle application. Efforts have been done for building a base architecture with common functionalities capable of easily hosting application-specific control code. Several case studies originating in this scenario will be shown; dedicated solutions for protype applications have been developed exploiting a real-time/FPGA architecture as ECU (Engine Control Unit) and custom RCP functionalities, such as water injection and testing hydraulic brake control.

A genome editing approach to the study of Parvovirus B19

Parvovirus B19 (B19V) is a ssDNA virus, with a 5596 nt long genome encapsidated within an icosahedral capsid with a diameter of 22 nm. Viral proteins are subdivided into structural and non-structural: the main non-structural one is the NS1, while the 2 structural proteins VP1 and VP2 assemble originating the capsid shell. B19V tropism is mainly limited to erythroid progenitor cells (EPCs), however, virus can be detected in several districts persisting in tissues possibly lifelong. The virus can induce anemia and erythroid aplasia. Therapeutic strategies are only symptomatic, so the search for antivirals is strongly active, with screenings showing the activity in vitro of different compounds like hydroxyurea, cidofovir and brincidofovir. In the first project, a functional minigenome of B19V was developed, able to express only the NS1 protein. This minigenome proved able to replicate and express the NS1 at levels comparable to unmodified clones. Furthermore, the ability of this minigenome to complement the function of NS1-deficient genomes was demonstrated, thus providing a proof-of-concept of B19V genome editing possibility and, at the same time, a useful tool to study the NS1 protein also as an antiviral target. In the second project I addressed the interplay between B19V and the cellular restriction factor APOBEC3B (A3B), a cytidine deaminase acting on ssDNA, whose footprint on B19V genome was proved by a bioinformatic sequence analysis performed by the hosting lab. To understand whether A3B still exerts activity and a potential antiviral effect on B19V, the UT7/EpoS1 cells were transduced with lentiviral vectors to silence A3B expression, then used as a model to study viral behavior. No significant role of A3B on B19V was demonstrated, in agreement with the hypothesis of viral adaptation to this cellular restriction factor; anyway, virus ability to alter A3B expression would deserve further investigations.

Nanostructured piezoelectric materials for the design and development of self-sensing composite materials and energy harvesting devices

The work activities reported in this PhD thesis regard the functionalization of composite materials and the realization of energy harvesting devices by using nanostructured piezoelectric materials, which can be integrated in the composite without affecting its mechanical properties. The self-sensing composite materials were fabricated by interleaving between the plies of the laminate the piezoelectric elements. The problem of negatively impacting on the mechanical properties of the hosting structure was addressed by shaping the piezoelectric materials in appropriate ways. In the case of polymeric piezoelectric materials, the electrospinning technique allowed to produce highly-porous nanofibrous membranes which can be immerged in the hosting matrix without inducing delamination risk. The flexibility of the polymers was exploited also for the production of flexible tactile sensors. The sensing performances of the specimens were evaluated also in terms of lifetime with fatigue tests. In the case of ceramic piezo-materials, the production and the interleaving of nanometric piezoelectric powder limitedly affected the impact resistance of the laminate, which showed enhanced sensing properties. In addition to this, a model was proposed to predict the piezoelectric response of the self-sensing composite materials as function of the amount of the piezo-phase within the laminate and to adapt its sensing functionalities also for quasi-static loads. Indeed, one final application of the work was to integrate the piezoelectric nanofibers in the sole of a prosthetic foot in order to detect the walking cycle, which has a period in the order of 1 second. In the end, the energy harvesting capabilities of the piezoelectric materials were investigated, with the aim to design wearable devices able to collect energy from the environment and from the body movements. The research activities focused both on the power transfer capability to an external load and the charging of an energy storage unit, like, e.g., a supercapacitor.

Nanostructured smart materials as functional components of medical devices

The field of medical devices has experienced, more than others, technological advances, developments and innovations, thanks to the rapidly expanding scientific knowledge and collaboration between different disciplines such as biology, engineering and materials science. The design of functional components can be achieved by exploiting composite materials based on nanostructured smart materials, that due to the inherent characteristics of single constituents develop unique properties that make them suitable for different applications preserving excellent mechanical proprieties. For instance, recent developments have focused on the fabrication of piezoelectric devices with multiple biomedical functions, as actuation and sensing functions in one component for monitoring pressure signals. The present Ph.D. Thesis aims at investigating nanostructured smart materials embedded into a polymeric matrix to obtain a composite material that can be used as a functional component for medical devices. (i) Nanostructured piezoelectric material with self-sensing capability was successfully manufactured by using ceramic (i.e. lead zirconate titanate (PZT)) and (ii) polymeric (i.e. poly(vinylidene fluoride-trifluoro ethylene (PVDF-TRFE)) piezoelectric materials. PZT nanofibers were obtained by sol-gel electrospinning starting from synthetized PZT precursor solution. Synthesis, sol-gel electrospinning process, and thermal treatment were accurately controlled to obtain PZT nanofibers dimensionally stable with densely packed grains in the perovskite phase. To guarantee the impact resistance of the laminate, the morphology and size of the hosting filler were accurately designed by increasing the surface area to volume ratio. Moreover, to solve the issue relative to the mechanical discrepancy between rigid electronic materials/soft human tissues/different material of the device (iii) a nanostructured flexible composite material based on a network of Poly-L-lactic acid (PLLA) made of curled nanofibers that present a tuneable mechanical response as a function of the applied stress was successful fabricated.

Monitoring of Mediterranean marine benthic biodiversity through novel, standardized, and integrated approaches

Marine healthy ecosystems support life on Earth and human well-being thanks to their biodiversity, which is proven to decline mainly due to anthropogenic stressors. Monitoring how marine biodiversity changes trough space and time is needed to properly define and enroll effective actions towards habitat conservation and preservation. This is particularly needed in those areas that are very rich in species compared to their low surface extension and are characterized by strong anthropic pressures, such as the Mediterranean Sea. Subtidal rocky benthic Mediterranean habitats have a complex structural architecture, hosting a panoply of tiny organisms (cryptofauna) that inhabit crevices and caves, but that are still unknown. Different artificial standardized sampling structures (SSS) and methods have been developed and employed to characterize the cryptofauna, allowing for data replicability and comparability across regions. Organisms growing on these artificial structures can be identified coupling morphological taxonomy and DNA barcoding and metabarcoding. The metabarcoding allows for the identification of organisms in a bulk sample without morphological analysis, and it is based on comparing the genetic similarities of the assessed organisms with barcoding sequences present in online barcoding repositories. Nevertheless, barcoded species nowadays represent only a small portion of known species, and barcoding reference databases are not always curated and updated on a regular basis. In this Thesis I used an integrative approach to characterize benthic marine biodiversity, specifically coupling morphological and molecular techniques with the employment of SSS. Moreover, I upgraded the actual status of COI (cytochrome c oxidase subunit I) barcoding of marine metazoans, and I built a customized COI barcoding reference database for metabarcoding studies on temperate biogenic reefs. This work implemented the knowledge about diversity of Mediterranean marine communities, laying the groundworks for monitoring marine and environmental changes that will occur in the next future as consequences of anthropic and climate threats.

Il modello Positive Energy Districts. Approcci innovativi e strumenti operativi per la transizione verso città clima-neutrali

Ad oggi le città europee si configurano come i principali centri di cultura, innovazione e sviluppo economico. Tuttavia, ospitando circa il 75% della popolazione e consumando quasi l’80% dell’energia prodotta, a causa delle significative emissioni di gas serra esse contribuiscono in modo rilevante ai cambiamenti climatici e, allo stesso tempo, ne subiscono gli effetti più intensi. La Comunità Europea ha preso atto della necessità di intraprendere un’azione sinergica che adotti strategie di mitigazione climatica e preveda misure di adattamento per far fronte agli impatti climatici ormai inevitabili. L'orientamento dei Programmi europei di Ricerca e Innovazione sul tema delle città smart e clima-neutrali sposta l'attenzione dalla dimensione urbana verso la scala di distretto. In questa prospettiva, i Positive Energy Districts (PEDs) si configurano come distretti di nuova edificazione, ma anche come soluzioni ambiziose per la riqualificazione di quartieri esistenti che gestiscono in modo attivo il fabbisogno energetico con un bilancio nullo di emissioni e un surplus di energia prodotta da rinnovabili. La ricerca di dottorato focalizza l’indagine sul modello PEDs esplorandone il potenziale di applicabilità nel contesto urbano consolidato. Nello specifico, la tesi lavora allo sviluppo di due contributi di ricerca originali: il PED-Portfolio e il PED-Toolkit. Tali contributi propongono un approccio sistemico, attraverso il quale intraprendere un percorso di conoscenza e sperimentazione del modello PEDs in una prospettiva di riduzione del fabbisogno energetico, ma anche in un’ottica di migliore accessibilità, vivibilità e resilienza di questi distretti. Al fine di verificare l’applicabilità dei risultati della ricerca, gli strumenti sviluppati vengono testati su un’area pilota e gli esiti di tale sperimentazione sono poi messi a confronto con il quadro dello stato dell’arte e con le principali linee di ricerca internazionali sul tema PEDs, affinando gli esiti del progetto di dottorato in un processo di ricerca-sperimentazione-ricerca.

On the role of AGN feedback in shaping galaxies across cosmic time

Understanding how Active Galactic Nuclei (AGN) shape galaxy evolution is a key challenge of modern astronomy. In the framework where black hole (BH) and galaxy growth are linked, AGN feedback must be tackled both at its “causes” (e.g. AGN-driven winds) and its “effects” (alteration of the gas reservoir in AGN hosts). The most informative cosmic time is z~1-3, at the peak of AGN activity and galaxy buildup, the so-called cosmic noon. The aim of this thesis is to provide new insights regarding some key questions that still remain open in this research field: i) What are the properties of AGN-driven sub-pc scale winds at z>1? ii) Are AGN-driven winds effective in influencing the life of galaxies? iii) Do AGN impact directly on star formation (SF) and gas content of their hosts? I first address AGN feedback as “caught in the act” by studying ultra-fast outflows (UFOs), X-ray AGN-driven winds, in gravitationally lensed quasars. I build the first statistically robust sample of high-z AGN, not preselected based on AGN-driven winds. I derive a first estimate of the high-z UFO detection fraction and measure the UFO duty cycle of a single high-z quasar for the first time. I also address the “effects” of AGN feedback on the life of host galaxies. If AGN influence galaxy growth, then they will reasonably impact the molecular gas reservoir first, and SF as a consequence. Through a comparative study of the molecular gas content in cosmic-noon AGN hosts and matched non-active galaxies (i.e., galaxies not hosting an AGN), we find that the host galaxies of more regular AGN (not selected to be the most luminous) are generally similar to non-active galaxies. However, we report on the possibility of a luminosity effect regulating the efficiency by which AGN might impact on galaxy growth.

Non-thermal phenomena in galaxy clusters: the LOFAR revolution

Turbulence introduced into the intra-cluster medium (ICM) through cluster merger events transfers energy to non-thermal components (relativistic particles and magnetic fields) and can trigger the formation of diffuse synchrotron radio sources. Owing to their steep synchrotron spectral index, such diffuse sources can be better studied at low radio frequencies. In this respect, the LOw Frequency ARray (LOFAR) is revolutionizing our knowledge thanks to its unprecedented resolution and sensitivity below 200 MHz. In this Thesis we focus on the study of radio halos (RHs) by using LOFAR data. In the first part of this work we analyzed the largest-ever sample of galaxy clusters observed at radio frequencies. This includes 309 Planck clusters from the Second Data Release of the LOFAR Two Metre Sky Survey (LoTSS-DR2), which span previously unexplored ranges of mass and redshift. We detected 83 RHs, half of which being new discoveries. In 140 clusters we lack a detected RH; for this sub-sample we developed new techniques to derive upper limits to their radio powers. By comparing detections and upper limits, we carried out the first statistical analysis of populations of clusters observed at low frequencies and tested theoretical formation models. In the second part of this Thesis we focused on ultra-steep spectrum radio halos. These sources are almost undetected at GHz frequencies, but are thought to be common at low frequencies. We presented LOFAR observations of two interesting clusters hosting ultra-steep spectrum radio halos. With complementary radio and X-ray observations we constrained the properties and origin of these targets.

A Distributed Support based on Kubeflow to Ease MLOps of Federated Learning Algorithms

The main objective of my thesis work is to exploit the Google native and open-source platform Kubeflow, specifically using Kubeflow pipelines, to execute a Federated Learning scalable ML process in a 5G-like and simplified test architecture hosting a Kubernetes cluster and apply the largely adopted FedAVG algorithm and FedProx its optimization empowered by the ML platform ‘s abilities to ease the development and production cycle of this specific FL process. FL algorithms are more are and more promising and adopted both in Cloud application development and 5G communication enhancement through data coming from the monitoring of the underlying telco infrastructure and execution of training and data aggregation at edge nodes to optimize the global model of the algorithm ( that could be used for example for resource provisioning to reach an agreed QoS for the underlying network slice) and after a study and a research over the available papers and scientific articles related to FL with the help of the CTTC that suggests me to study and use Kubeflow to bear the algorithm we found out that this approach for the whole FL cycle deployment was not documented and may be interesting to investigate more in depth. This study may lead to prove the efficiency of the Kubeflow platform itself for this need of development of new FL algorithms that will support new Applications and especially test the FedAVG algorithm performances in a simulated client to cloud communication using a MNIST dataset for FL as benchmark.

Quality controls for the Mu2e electromagnetic calorimeter and R&D studies for the muon capture rate determination

According to the SM, while Lepton Flavour Violation is allowed in the neutral sector, Charged Lepton Flavour Violation (CLFV) processes are forbidden. The Mu2e Experiment at Fermilab will search for the CLFV process of neutrinoless conversion of a muon into an electron within the field of an Al nucleus. The Mu2e detectors and its state-of-the-art superconducting magnetic system are presented, with special focus put to the electromagnetic crystal calorimeter. The calorimeter is composed by two annular disks, each one hosting pure CsI crystals read-out by custom silicon photomultipliers (SiPMs). The SiPMs are amplified by custom electronics (FEE) and are glued to copper holders in group of 2 SiPMs and 2 FEE boards thus forming a crystal Readout Unit. These Readout Units are being tested at the Quality Control (QC) Station, whose design, realization and operations are presented in this work. The QC Station allows to determine the gain, the response and the photon detection efficiency of each unit and to evaluate the dependence of these parameters from the supply voltage and temperature. The station is powered by two remotely-controlled power supplies and monitored thanks to a Slow Control system which is also illustrated in this work. In this thesis, we also demonstrated that the calorimeter can perform its own measurement of the Mu2e normalization factor, i.e. the counting of the 1.8 MeV photon line produced in nuclear muon captures. A specific calorimeter sub-system called CAPHRI, composed by four LYSO crystals with SiPM readout, has been designed and tested. We simulated the capability of this system on performing this task showing that it can get a faster and more reliable measurement of the muon capture rates with respect to the current Mu2e detector dedicated to this measurement. The characterization of energy resolution and response uniformity of the four procured LYSO crystals are llustrated.