Online Learning and Teaching in Higher Education, a book review

Peer-reviewed

Metadata for describing learning scenarios under European Higher Education Area paradigm

In this paper we identify the requirements for creating formal descriptions of learning scenarios designed under the European HigherEducation Area paradigm, using competences and learning activities as the basic pieces of the learning process, instead of contents and learning resources, pursuing personalization. Classical arrangements of content based courses are no longer enough to describe all the richness of this new learning process, where user profiles, competences and complex hierarchical itineraries need to be properly combined. We study the intersection with the current IMS Learning Design specification and theadditional metadata required for describing such learning scenarios. This new approach involves the use of case based learning and collaborativelearning in order to acquire and develop competences, following adaptive learning paths in two structured levels.

New compositions of fluoroindate glasses with higher chemical resistance

In this paper, glasses in the systems In-Ba-Mg and In-Ba-Zn-Sr-Mg were water leachead at 80ºC showing surface degradation after 72 hours of leaching. The extent of such degradation is determined by the solubility and the concentration of the elemental fluorides that constitute the glasses. The formation of a layer of crystallized phases on the surface of the samples was observed. Small weight losses were registered and the absence of water on the glass matrix after the attack suggested that the use of MgF2 in the systems studied can lead to better results against moisture corrosion when compared to other fluoride glasses such as the fluorozirconates.

Reflective Learning in Higher Education: A Comparative Analysis

A descriptive, exploratory study is presented based on a questionnaire regarding the following aspects of reflective learning: a) self-knowledge, b) relating experience to knowledge, c) self-reflection, and d) self-regulation of the learning processes. The questionnaire was completed by students studying four different degree courses (social education, environmental sciences, nursing, and psychology). Specifically, the objectives of a self-reported reflective learning questionnaire are: i) to determine students’ appraisal of reflective learning methodology with regard to their reflective learning processes, ii) to obtain evidence of the main difficulties encountered by students in integrating reflective learning methodologies into their reflective learning processes, and iii) to collect students’ perceptions regarding the main contributions of the reflective learning processes they have experienced

Wikipedia in Higher Education: An Empirical Study on Faculty Perceptions and Practices

Peer-reviewed

Módulo eletrônico de controle para válvulas solenóides

This technical note describes a new and simple electronic circuit for driving solenoid valves. The circuit is based on a single integrated circuit DRV103, which is able to drive resistive or inductive loads up to 1.5 A. Switching of 12-V loads can be controlled by TTLlevel signals in two distinct steps. Initially, 12 V is applied during 110 ms, followed by 4.2 V RMS until the end of the activation TTL pulse. This mode of operation is particularly suitable to drive solenoids, because it requires a higher voltage to start and a lower maintenance voltage. By using this circuit, power consumption and heating are reduced and the solenoid lifetime is enhanced. Moreover, this circuit is specially appropriated to build computercontrolled solenoid valves systems.

Coming from outside the Academy. Values of 2.0 culture in higher education

This article reflects on how some values, interests, and particularities of 2.0 culture enter on higher and postgraduate education institutions. Through theidentification of the features of 2.0, this document visualizes some of the resistances, obstacles, possibilities, and opportunities detected in these institutions, many of them focusing on the core of the higher education and postgraduate institutions (i.e. strategic vision, methodology, role of teachers and students, relation between formal and informal learning, contents and assessment). Responsibility in the training and updating of current and future professionals places these institutions under the discussion and decision-making process related to the role that 2.0 tools should play. We wonder if it implies a crossroad which affects the whole set of attitudes and values on the role of training institutions in the context of the construction of socialized knowledge.

Microcontroller-based interface circuit for inductive sensors

This work proposes a fully-digital interface circuit for the measurement of inductive sensors using a low-cost microcontroller (µC) and without any intermediate active circuit. Apart from the µC and the sensor, the circuit just requires an external resistor and a reference inductance so that two RL circuits with a high-pass filter (HPF) topology are formed. The µC appropriately excites such RL circuits in order to measure the discharging time of the voltage across each inductance (i.e. sensing and reference) and then it uses such discharging times to estimate the sensor inductance. Experimental tests using a commercial µC show a non-linearity error (NLE) lower than 0.5%FSS (Full-Scale Span) when measuring inductances from 1 mH to 10 mH, and from 10 mH to 100 mH.

Welding of Sheet metal using Modified short arc MIG/MAG welding process

In this research work, the results of an investigation dealing with welding of sheet metals with diverse air gap using FastROOT modified short arc welding method and short circuit MAG welding processes have been presented. Welding runs were made under different conditions and, during each run, the different process parameters were continuously monitored. It was found that maximum welding speed and less HAZ are reached under specific welding conditions with FastROOT method with the emphasis on arc stability. Welding results show that modified short arc exhibits a higher electrode melting coefficient and with virtually spatter free droplet transition. By adjusting the short circuit duration the penetration can be controlled with only a small change in electrode deposition. Furthermore, by mixing pulsed MIG welding with modified arc welding the working envelope of the process is greatly extended allowing thicker material sections to be welded with improved weld bead aesthetics. FastROOT is a modified short arc welding process using mechanized or automated welding process based on dip transfer welding, characterized by controlled material deposition during the short circuit of the wire electrode to the workpiece.

Digital learner portfolio as a tool for inovating assessment in the European Higher Education Area

The present article comes from a doctoral thesis that turns on digital learner portfolio, which is an innovating methodology from the perspective of European Higher Education Area. First, the educative concept of eportfolio is described in the sense of its procedure and its structure, by means of the technological support of a platform of virtual campus. Second, it is shown the pedagogical model of an eportfolio that adapts subjects with an instrumental character to one organization based on tasks and reflections. This design of virtual learning environment is based on a teaching- learning methodology sustained in the activity of the student, which tries to give support to the management of his or her own process of learning and assessment. Finally, the article illustrates the experience of implementation of the first digital learner portfolios in the University of Barcelona and the Autonomous University of Barcelona, with the objective of reflecting about the pedagogical consequences that this assessment model with technological support has in a traditional higher education institution.

Software per al cronometratge de temps mitjançant sensors digitals

L’Slot, conegut per tots amb el nom d’Scalextric, s’ha implantat com a una forma d’oci habitual, la pràctica del qual no queda restringida als més petits, sinó que cada vegada crea més afició entre els grans. El fet que l’Slot s’hagi extès entre els adults n’ha revolucionat la pràctica. L’entrada al mercat de l’Slot de gent adulta, i amb poder adquisitiu molt superior als adolescents, ha provocat que les marques especialitzades vagin evolucionant els seus productes cada vegada més. Totes les marques s’han vist obligades a desenvolupar vehicles més competitius i alhora treure al mercat accessoris que augmentin la realitat del joc. Una de les necessitats que s’ha creat és la de competir entre jugadors. Aquesta competició tan pot ser en forma de carrera entre diversos participants, com de forma individual, cronometrant el temps de cada participant en un circuit. L’objectiu principal del projecte és crear un sistema capaç de realitzar cronometratges en temps real mitjançant sensors digitals ja existents en el mercat de l’Slot i poder controlar i visualitzar la informació des d’un PC. Per a poder captar els senyals dels sensors s’ha utilitzat un sistema microcontrolat, que garanteix gran velocitat d’adquisició, processament de dades i transmissió. La comunicació del Microcontrolador amb el PC s’ha realizat mitjançant el bus USB. El PC serà el controlador del sistema i donarà les ordres al Microcontrolador, podent així tenir control total sobre el funcionament del programa. També serà el PC el que tractarà els crocometratges enregistrats i els mostrarà per pantalla

La incidencia de la toma de apuntes sobre el aprendizaje significativo. Un estudio de enseñanza superior.= The incidence of notetaking on meaningful learning. A study of higher education.

En este estudio presentamos una experiencia llevada a cabo con estudiantes de la asignatura “Psicología de la Educación” de diferentes centros universitarios. Tomando como marco de referencia las teorías constructivistas del aprendizaje, el objetivo de nuestro trabajo se centra en comprobar la incidencia de la utilización de diferentes estrategias de enseñanza por parte del profesor y de determinadas estrategias de aprendizaje en el proceso de registrar la información por parte de los estudiantes, en la significatividad del aprendizaje.Los resultados obtenidos muestran que en los grupos donde los profesores han utilizado estrategias de enseñanza diferentes a la clase magistral, se ha producido un cambio positivo en las respuestas de los estudiantes o se ha mantenido el mismo nivel, mientras que el grupo donde se ha utilizado una metodología magistral, el nivel de respuesta es inferior. Así mismo, hemos podido observar como los grupos de estudiantes que utilizan las estrategias de aprendizaje seleccionadas para tomar apuntes mejoran su nivel de respuestas, lo cual no se produce en el grupo control

Electrocatalytic oxidation of methanol by the [Ru3O(OAc)6(py)2(CH3OH)]3+cluster: improving the metal-ligand electron transfer by accessing the higher oxidation states of a multicentered system

The [Ru3O(Ac)6(py)2(CH3OH)]+ cluster provides an effective electrocatalytic species for the oxidation of methanol under mild conditions. This complex exhibits characteristic electrochemical waves at -1.02, 0.15 and 1.18 V, associated with the Ru3III,II,II/Ru3III,III,II/Ru 3III,III,III /Ru3IV,III,III successive redox couples, respectively. Above 1.7 V, formation of two RuIV centers enhances the 2-electron oxidation of the methanol ligand yielding formaldehyde, in agreement with the theoretical evolution of the HOMO levels as a function of the oxidation states. This work illustrates an important strategy to improve the efficiency of the oxidation catalysis, by using a multicentered redox catalyst and accessing its multiple higher oxidation states.

INTERACTIONS: DESIGN, IMPLEMENTATION AND EVALUATION OF A COMPUTATIONAL TOOL FOR TEACHING INTERMOLECULAR FORCES IN HIGHER EDUCATION

Intermolecular forces are a useful concept that can explain the attraction between particulate matter as well as numerous phenomena in our lives such as viscosity, solubility, drug interactions, and dyeing of fibers. However, studies show that students have difficulty understanding this important concept, which has led us to develop a free educational software in English and Portuguese. The software can be used interactively by teachers and students, thus facilitating better understanding. Professors and students, both graduate and undergraduate, were questioned about the software quality and its intuitiveness of use, facility of navigation, and pedagogical application using a Likert scale. The results led to the conclusion that the developed computer application can be characterized as an auxiliary tool to assist teachers in their lectures and students in their learning process of intermolecular forces.

Conference Proceedings. Assessing Language and (Inter) cultural Competences in Higher Education. Evaluation des compétences langagières et (inter) culturelles dans l’enseignement supérieur

This epublication contains papers that were presented at the conference “Assessing Language and (Inter) cultural Competences in Higher Education” which took place at the University of Turku (Finland) on 30.8.1.9.2007. The online proceedings may be downloaded and used provided the source is acknowledged.