522 resultados para Hidrolise alcalina
Resumo:
The area chosen for this study is the island of Trinidade, which is located 1167 km off the Brazilian coast, in parallel Victory at 20 ° 30'S and 29 º 19'W, being the most easterly point of our continent. The isolation of oceanic island of Trinidade leaves no noticeable that she is part of a large submarine volcanic chain oriented east-west lineament known as Vitória- Trindade. Along with the island of Martin Vaz, who is Federal Territory is administered by the Navy of Brazil. Both correspond to Source alkaline volcanic islands. The area of the island of Trinidad has approximately 10 km2. Geologically consisting ankaratritic spills, spills tannbuschiticos, volcanic tuff spills analcite-ankaratrite, phonolite spills, spills nefelinite, pyroclastics, spills grazinite, tinguaitos, olivine-analcitito, calcarenite dunes and wind according to Almeida (1961). The island has its base on the ocean floor, at 5,800 m depth. It is the only place still recognizes preserved volcanic necks and plugs, as well as remnants of a volcano in Brazil. Magmatism occurred here a sodium alkali-silica subsaturated where his wrist was last 50,000 years according to Almeida (1961). It is a place with restricted access due to their distance from the coast, his contribution and hard to be an exclusive area of the Navy. On the island with peaks occur up to 620 meters high, and its rugged mountainous terrain and difficult access to very specific points, as the peak of Desire, peak Fazendinha, Monument and other points on the island. Because of its location far from the coast, its small infrastructure, difficulty of landing and restricted access by sea, the island of Trinidad offers no possibility of tourism, being a military outpost, and scientific basis of great importance, which conduct research in area of marine biology, oceanography, geology and others
Resumo:
The study area of the Guarda-Mor target (Israelândia-GO) contextualizes the terrains of the estaern portion of the Arenópolis Magmatic Arc, more accurately, the Neoproterozoic associations inserted in the field of the Jaupaci volcano-sedimentary sequence. The mapped area is located in the central-western of Goiás state. The presente paper has as main objective to characterize the structural, petrographic and litogeochemistry of the target rocks beyond to compare these factors with the Mina Bacilândia rocks (Fazenda Nova-GO) in order to assess the genetic similarity of volcano-sedimentary units and deposits associated. The Guarda-Mor target is represented by the Jaupaci metavolcanic rocks sequence presenting bimodal volcanism. This sequence consists in metafelsic rocks like sericite/muscovite quartz schist, phyllite and metarriolites and/or metariodacites with calc-alkaline geochemical signature and metamafic rocks with tholeiitic character formed by actinolite - chlorite schist and chlorite - quartz schist. Besides the package of supracrustal rocks also can be observed the occurrence of a local intrusion syn- to late - tectonic named Granito Subvulcânico. In the study area beyond the marked volcanism also seen an event of crustal melting granitogênese evidenced by the presence of 2 granites at the east and the west of the map, Granito Israelândia and Granito Iporá respectively. Structural analysis both at the macro and micro have identified 3 deformation phases. The types of rock on the region record features in the metamorphic facies top and down. These features were subdivided into 3 metamorphic areas: the east and West areas show thermal metamorphism due to intrusion of adjacente granites while the central domain displays features of regional metamorphism. Gold mineralization of the Guarda –Mor deposit target suggests a possible structural control beyond pronounced the hydrothermal alteration. The mineralization may also be...
Resumo:
This work aims to study the structural characteristics of silica gels obtained from the acid hydrolysis of tetraethoxysilane (TEOS) in water solutions with different concentrations of sodium dodecyl sulfate (SDS). The structural characteristics were studied in stages ranging from the wet gel to the dry stages of the gels (aerogels and xerogels). Aerogels were obtained by ambient pressure drying (APD) after silylation process using trimethylchlorosilane (TMCS) as silylating agent. Xerogels were obtained by conventional evaporating the liquid phase from non silylated gels. The samples were characterized by nitrogen adsorption and small angle X-ray scattering (SAXS). The structure of the wet gels and of the aerogels prepared with the surfactant exhibited characteristics of mass-fractal structures with fractal dimension D in the range 2.1-2.2 for the wet gels and 2.3-2.4 for the aerogels. The characteristic size of the fractal domain reduces while the size a0 of the primary silica particle composing the fractal structure increases with the drying of the gels, in a process in which share of the porosity is eliminated. Aerogels exhibited typical values for the specific surface of 900 m2g-1 and of 3.5 cm3.g-1 for the total pore volume. These values are correspondingly comparable to those of the aerogels prepared by supercritical drying, since the silylation process replaces hydrophilic –OH groups by hydrophobic –Si-R3 ones, inhibiting the porosity elimination on drying. The silica particle size also increases lightly with the silylation because the attachment of the –Si-R3 groups on the silica surface. The pore size distribution curves of the aerogels are similar for all samples exhibiting a maximum in around 40 nm, independent the concentration of surfactant. This suggests that the characteristic size of 40 nm is due to the association of surfactant micelles... (Complete abstract click electronic access below)
Resumo:
In the present work the thermal characteristics of gels and xerogels of Silica/organic hybrids derived from different concentrations of GPTS-TEOS were investigated by thermal analysis (TG, DTA, and DSC). The preparation of gels of the Silica/organic hybrid matrix was held through the sol-gel process, consisting by the hydrolysis of alkoxides GPTS and TEOS in proportion (1:1) and (1:2) that was promoted in acidic conditions under reflux and stirring at 80oC/2h, producing the matrix in the colloidal state (sol). Gels were prepared by addition of NH4OH to the sol, promoting gelation of sol in sealed plastics containers. Part of the gels samples was analyzed by TG, DTS and DSC techniques in order to characterize water loss and degradation of the polymeric “epoxy” groups present in the structure of the silica derived from the GPTS alkoxide. Another set of samples was dried at 80oC/48h to obtain xerogels (dried gels) and analyzed by the same techniques. We obtained the characteristics temperatures of the matrix by the techniques DTA, DSC and TG, under measurements of thermal analysis until 800oC and 600oC in case of DSC. By thermal analysis (TG, DTA, and DSC) the main endothermic events (loss of water, melting, pyrolysis) and exothermic events (burning of the polymer) of the GPTS-TEOS matrix were determined
Resumo:
Feline hepatic lipidosis or fatty liver disease is a cholestatic syndrome that affects domestic cats and is characterized by excess fat accumulation in the liver of cats. Symptoms commonly seen with this syndrome are anorexia, weight loss, lethargy, vomiting, jaundice, and occasionally behavioral or neurologic signs such as excessive drooling, blindness, coma, and seizures. The diagnosis is based on the patient history, clinical examination, complementary examination, and the definitive diagnosis is obtained by cytology and/or histopathology of hepatic tissue. In serum biochemistry, the main findings include increased serum alkaline phosphatase (ALP), alanine aminotransferase (ALT), aspartate amino transferase (AST) and bilirubin. The gamma glutamyl transferase (GGT) is normal or slightly increased. The cornerstone of therapy is aggressive feeding to supply the cat full caloric requirements. Without aggressive nutritional support and intensive monitoring the fatty liver disease can be fatal
Resumo:
The wood of the gender Eucalyptus occupies a prominence place in relation to other cellulose sources, due to its chemical composition, its low cost, abundance and availability. The dissolving pulp obtaining occurs basically starting from three stages: prehydrolysis of the wood following by cooking and finally by the bleaching process. In the dissolving pulp production is necessary a pretreatment stage for the hemicelluloses removal. Among the chemical cooking processes, the Kraft process is the most used for cellulosic pulps production starting from eucalyptus, in the additive presence or not. The anthraquinone uses in the pulping process has as main purposes increasing the delignification rate as well as protecting the pulp regarding the degradation of the polysaccharide chains. The ECF bleaching process consists of the purification of the pulp through bleaching agents, being excepted the elementary chlorine. The dissolving pulp is a pulp of high a-cellulose content and purity destined to the cellulose derivatives production as carboxymethyl cellulose, nitrocellulose and microcrystalline cellulose. The production of a certain product, as well as its final application, is determined by the chemical properties of the pulp. The present work had as purpose producing cellulosic pulp with kappa number around 9 destined to the production of dissolving pulp in way to evaluate the use of the anthraquinone (AQ) in the Kraft process according to the chemical properties of the obtained pulps. It has been still intended developing an effective technology of bleaching for the high purity and quality dissolving pulp production. The prehydrolysis was accomplished in laboratory rotational autoclave for 30 minutes at 170ºC in the water:wood rate 3,5:1 (L:kg). The Kraft/AQ pulping were accomplished in laboratory rotational autoclave being initially modified the active alkali load (10, 13, 16 and 19%) at sulfidity of 25% ...
Resumo:
Osteosarcoma is the primary osseous neoplasia frequently diagnosed in dogs and it’s the main answerable for more than 85% of the neoplasias origened from the skeleton. The average age of onset of the lesion is 7 years, especially in large breeds and giant, with males being more affected than females. In general, 75% of osteosarcomas develop in the appendicular skeleton and 25% in the axial. The forelimbs are more affected than the hindlimbs, since support 60% of body weight. The osteosarcoma diagnosis is made by the analys of the animal’s clinic historic, detailed physique exams, blood exams alkaline phosphatase, xray exams, cytology, biopsy. The treatment of choice is the amputation associated to the chemotherapy. However, in some cases the member is preserved by the allograft technic. The chemotherapy associated to the surgery reduces the total load of the tumor, lengthens the interval of the life and improves the quality of pacient’s life. The most used medicines are cisplatin and doxorubicin. They can be used in separated or associated ways. The prognostic of dogs with osteosarcoma is reserved
Resumo:
Aiming to reduce the cost of electrocatalysts and a greater resistance to CO poisoning this work was to study the adsorption and oxidation of carbon monoxide on ordered intermetallic phases AuIn, AuSb2, AuSn, PdSb and PdSn using voltammetric techniques in alkaline electrolyte solution. The results suggest that the AuSn and PdSn intermetallics has some form of resistance to CO poisoning. It is assumed that this behavior is a result of electronic effect and the effect of the third body has been achieved by adding a second metal to Au and Pd. However, further studies should be conducted to confirm this hypothesis as to test these materials as electrocatalysts in the reaction of oxidation of fuels
Resumo:
Pós-graduação em Medicina Veterinária - FCAV
Resumo:
Pós-graduação em Medicina Veterinária - FCAV
Resumo:
Pós-graduação em Engenharia Mecânica - FEG
Resumo:
Pós-graduação em Zootecnia - FCAV
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)