Detection of dangerous situations using a smart internet of things system

The Internet of Things (IoT) is a concept that can foster the emergence of innovative applications. In order to minimize parents’s concerns about their children’s safety, this paper presents the design of a smart Internet of Things system for identifying dangerous situations. The system will be based on real time collection and analysis of physiological signals monitored by non-invasive and non-intrusive sensors, Frequency IDentification (RFID) tags and a Global Positioning System (GPS) to determine when a child is in danger. The assumption of a state of danger is made taking into account the validation of a certain number of biometric reactions to some specific situations and according to a self-learning algorithm developed for this architecture. The results of the analysis of data collected and the location of the child will be able in real time to child’s care holders in a web application.

Renewable energy system for an isolated micro grid

This paper presents the development of the power electronics needed for the interaction between the electrical generator of a wind turbine and an isolated ac micro grid. In this system there are basically two types of receptors for the energy produced by the wind turbine, which are the loads connected to the isolated micro grid and the batteries used to store energy. There are basically two states in which the system will work. One of the states is when there is enough wind power to supply the loads and the extra energy is used to charge the batteries. The other state is when there is low wind power and the batteries have to compensate the lack of power, so that the isolated micro grid has enough power to supply at least the priority loads. In this paper are presented the hardware and the control algorithm for the developed system. The topology was previously tested in computer simulations, using the software PSIM 9.0, and then validated with the implementation of a laboratory prototype.

Bidirectional battery charger with grid-to-vehicle, vehicle-to-grid and vehicle-to-home technologies

This paper presents the development of na on-board bidirectional battery charger for Electric Vehicles (EVs) targeting Grid-to-Vehicle (G2V), Vehicle-to-Grid (V2G), and Vehicle-to-Home (V2H) technologies. During the G2V operation mode the batteries are charged from the power grid with sinusoidal current and unitary power factor. During the V2G operation mode the energy stored in the batteries can be delivered back to the power grid contributing to the power system stability. In the V2H operation mode the energy stored in the batteries can be used to supply home loads during power outages, or to supply loads in places without connection to the power grid. Along the paper the hardware topology of the bidirectional battery charger is presented and the control algorithms are explained. Some considerations about the sizing of the AC side passive filter are taken into account in order to improve the performance in the three operation modes. The adopted topology and control algorithms are accessed through computer simulations and validated by experimental results achieved with a developed laboratory prototype operating in the different scenarios.

Towards "green" smart materials for force and strain sensors: The case of polyaniline

Stress/strain sensors constitute a class of devices with a global ever-growing market thanks to their use in many fields of modern life. They are typically constituted by thin metal foils deposited on flexible supports. However, the low inherent resistivity and limited flexibility of their constituents make them inadequate for several applications, such as measuring large movements in robotic systems and biological tissues. As an alternative to the traditional compounds, in the present work we will show the advantages to employ a smart material, polyaniline (PANI), prepared by an innovative environmentally friendly route, for force/strain sensor applications wherein simple processing, environmental friendliness and sensitivity are particularly required.

Simulation of OWES with five-Level converter linked to the grid: Harmonic assessment

This paper deals with a computing simulation for an offshore wind energy system taking into account the influence of the marine waves action throughout the floating platform. The wind energy system has a variable-speed turbine equipped with a permanent magnet synchronous generator and a full-power five level converter, injecting energy into the electric grid through a high voltage alternate current link. A reduction on the unbalance of the voltage in the DC-link capacitors of the five-level converter is proposed by a strategic selection of the output voltage vectors. The model for the drive train of the wind energy system is a two mass model, including the dynamics of the floating platform. A case study is presented and the assessment of the quality of the energy injected into the electric grid is discussed.

Smart interior design of buildings and its relationship to land use

Architectural design is often associated with aesthetics and style, but it is also very important to building performance and sustainability. There are some studies associating architectural design to the choice for materials from sustainable sources, to indoor air quality, to energy efficiency and productivity. This article takes a step further to analyse how the use of efficient interior design techniques can impact the habitable space in order to improve building sustainability in land use. Smart interior design, a current trend related to the use of efficient and flexible furniture and movable walls in tiny or compact apartments, is analysed. A building with a standard design is used as a case study reference building and compared to a proposed theoretical design alternative using smart interior design techniques. In order to correctly assess sustainability performance, a quantifiable and verified method is used. Results showed that the use of smart interior design techniques can greatly reduce buildingsâ impact on the environment.

Weiterentwicklung von OpenSSL.NET als Schnittstelle zwischen der freien OpenSSL-Bibliothek und dem .NET Framework für den Einsatz in Smart Metering Systemen

[s.c.]

A Grid Supercomputing Enviroment for High Demand Computational Applications

Despite the huge increase in processor and interprocessor network performace, many computational problems remain unsolved due to lack of some critical resources such as floating point sustained performance, memory bandwidth, etc... Examples of these problems are found in areas of climate research, biology, astrophysics, high energy physics (montecarlo simulations) and artificial intelligence, among others. For some of these problems, computing resources of a single supercomputing facility can be 1 or 2 orders of magnitude apart from the resources needed to solve some them. Supercomputer centers have to face an increasing demand on processing performance, with the direct consequence of an increasing number of processors and systems, resulting in a more difficult administration of HPC resources and the need for more physical space, higher electrical power consumption and improved air conditioning, among other problems. Some of the previous problems can´t be easily solved, so grid computing, intended as a technology enabling the addition and consolidation of computing power, can help in solving large scale supercomputing problems. In this document, we describe how 2 supercomputing facilities in Spain joined their resources to solve a problem of this kind. The objectives of this experience were, among others, to demonstrate that such a cooperation can enable the solution of bigger dimension problems and to measure the efficiency that could be achieved. In this document we show some preliminary results of this experience and to what extend these objectives were achieved.

From e-voting to smart-voting : e-Tools in and for elections and direct democracy in Switzerland

To what extent do and could e-tools contribute to a democracy like Switzerland? This paper puts forward experiences and visions concerning the application of e-tools for the most traditional democratic processes- elections and, of special importance in Switzerland, direct-democratic votes.Having the particular voting behaviour of the Swiss electorate in mind (low voter turnout - especially among the youngest age group, low political knowledge, etc.) we believe that e-tools which provide information in the forefront of elections or direct-democratic votes offer an enormous service to the voter. As soon as e-voting will be possible in Switzerland (as planned by the government), those e-tools for gathering information online will become indispensable and will gain power enormously. Therefore political scientists should not only focus on potential effects of e-voting itself but rather on the combination of (connected)e-tools of the pre-voting and the voting sphere. In the case of Switzerland, we argue in this paper, the offer of VAAs such as smartvote for elections and direct-democratic votes can provide the voter with more balanced and qualitatively higher information and thereby make a valuable contribution to the Swiss democracy.

Monitorització de rendiment i accounting de centres de computació grid

El Port d'Informació Científica és un centre de Computació Grid de referència que dona suport a comunitats científiques, com el LHC (CERN). Al PIC, trobem una gran varietat de tecnologies que proporcionen serveis al centre. Des de l'arquitectura i elements de la xarxa, fins a recursos informàtics de computació, sistemes d'emmagatzematge a disc i cinta magnètica, bases de dades (ORACLE/PostgreSQL). El projecte consisteix en el disseny i implementació d'una base de dades col·lectora de tota la informació rellevant dels diferents sistemes del centre, i un portal web on mostrar tots els valors i gràfiques, tot basat en programari lliure.

An efficient use of virtualization in grid/cloud environments

Grid is a hardware and software infrastructure that provides dependable, consistent, pervasive, and inexpensive access to high-end computational resources. Grid enables access to the resources but it does not guarantee any quality of service. Moreover, Grid does not provide performance isolation; job of one user can influence the performance of other user’s job. The other problem with Grid is that the users of Grid belong to scientific community and the jobs require specific and customized software environment. Providing the perfect environment to the user is very difficult in Grid for its dispersed and heterogeneous nature. Though, Cloud computing provide full customization and control, but there is no simple procedure available to submit user jobs as in Grid. The Grid computing can provide customized resources and performance to the user using virtualization. A virtual machine can join the Grid as an execution node. The virtual machine can also be submitted as a job with user jobs inside. Where the first method gives quality of service and performance isolation, the second method also provides customization and administration in addition. In this thesis, a solution is proposed to enable virtual machine reuse which will provide performance isolation with customization and administration. The same virtual machine can be used for several jobs. In the proposed solution customized virtual machines join the Grid pool on user request. Proposed solution describes two scenarios to achieve this goal. In first scenario, user submits their customized virtual machine as a job. The virtual machine joins the Grid pool when it is powered on. In the second scenario, user customized virtual machines are preconfigured in the execution system. These virtual machines join the Grid pool on user request. Condor and VMware server is used to deploy and test the scenarios. Condor supports virtual machine jobs. The scenario 1 is deployed using Condor VM universe. The second scenario uses VMware-VIX API for scripting powering on and powering off of the remote virtual machines. The experimental results shows that as scenario 2 does not need to transfer the virtual machine image, the virtual machine image becomes live on pool more faster. In scenario 1, the virtual machine runs as a condor job, so it easy to administrate the virtual machine. The only pitfall in scenario 1 is the network traffic.

PHA urges 'freshers' to be smart and know their alcohol limits

As 'fresher's week' commences, the Public Health Agency is encouraging students across Northern Ireland to avoid binge drinking and to know their limits if they do choose to drink alcohol.Enjoying new freedoms, at college or university, means taking care of yourself and others and, if you choose to drink, staying within safe alcohol limits. Owen O'Neill, PHA Health and Social Wellbeing Improvement Manager for drugs and alcohol, said: "Some young people may drink more when they leave home, or join their friends in college or university for the first time. They might think that, as young people, they don't have to take care with alcohol, but staying within the safe drinking limits is important for everyone who drinks. Excessive and binge drinking can have lasting effects on health, such as damage to the liver, heart, brain and stomach. Drinking too much can also increase the risk of accidents and antisocial behaviour as well as sexually transmitted infections and unplanned pregnancy"."We would also strongly advise against drinking games. Although they are regarded as a 'bit of fun', in reality they can be very dangerous. As an extreme form of binge drinking, where large quantities of alcohol are consumed in a very short time, drinking games can result in alcohol poisoning, leading to brain damage, coma or death. The PHA encourages students to enjoy their new student life, but urges them to be aware of their alcohol intake and drink responsibly, especially throughout fresher's week, with the many cheap drink promotions currently available."Daily alcohol limits are recommended by the government in order to avoid the risks of excessive and binge drinking in any one session. These are:Men: No more than 3 to 4 units of alcohol a day and no more than 21 units over the course of the week.Women: No more than 2 to 3 units of alcohol a day and no more than 14 units over the course of the week.Examples of units:Can of extra strong lager - 4 unitsBottle of lager - 1.5 unitsPint of standard lager - 2.5 unitsPint of premium larger - 3 unitsSmall pub bottle of wine - 2.25 units70cl bottle of wine - 7 to 10 unitsStandard 275ml of alcopops - 1.5 to 1.8 units70cl bottle of alcopops - 3.75 to 4.5 unitsPub measure of spirits - 1.5 unitsPint of cider - 3 unitsPint of stout - 2.5 unitsIf you do choose to drink alcohol:DON'T:Ever drink and driveDrink on an empty stomachMix alcohol with other drugsDrink in rounds as this may speed up your drinkingLeave your drinks unattendedDO:Take sips rather than gulpsAlternate each alcoholic drink with a non alcoholic drink e.g. water or a soft drinkSet yourself a limit and try to stick to it (refer to daily alcohol limits) Take frequent breaks from drinking to give your body time to recoverTell friends and family where you are going and who you will be withRemember, that for each unit you drink over the daily limit, the risk to your health increases. It's important to spread the units throughout the week - you can't 'save up' your units for the weekend or your holiday. It is also important to drink plenty of water, ideally matching the amount of alcohol you have consumed.So students make smart choices this term - drink sensibly and know your limits!For further information on sensible drinking and alcohol units visit the Public Health Agency's website www.knowyourlimits.info

A New Year's Resolution - be smart about your drinking!

Now 2012 has arrived, the Public Health Agency is encouraging people to make a New Year's resolution to know their limits when it comes to alcohol, not to drink excessively and to cut back for a while, especially if the festive period led to a little too much consumption.Owen O'Neill, PHA Health and Social Wellbeing Improvement Manager and drugs and alcohol lead, explained: "The New Year is a great opportunity for us to be positive about our health, making resolutions that make us look and feel better. If people choose to drink, staying within the safe drinking limits is important. Excessive and binge drinking can have lasting effects on health, such as damage to the liver, heart, brain and stomach. Drinking too much can also increase the risk of accidents and antisocial behaviour as well as sexually transmitted infections and unplanned pregnancy. And it doesn't have to be drinking to extremes - regularly drinking over the recommended limits can have a damaging effect."Remember that for each unit you drink over the daily limit, the risk to your health increases. It's important to spread the units throughout the week and not 'save' them for the weekend and to drink plenty of water, ideally matching the amount of alcohol you have consumed."For those who have consumed a lot of alcohol over the festive season, cutting back in the New Year and being careful can have immediate, positive effects particularly on helping you to look and feel better, being less tired during the day, feeling fitter and perhaps losing weight. Longer term, the benefits include improved mood, sleep, memory and general health, particularly improving liver function, immunity to illness and preventing any damage caused by any excessive drinking getting any worse."Daily alcohol limits are recommended by the government to avoid the dangers of excessive and binge drinking in any one session. These are:MenNo more than 3 to 4 units of alcohol a day and no more than 21 units over the course of the week.WomenNo more than 2 to 3 units of alcohol a day and no more than 14 units over the course of the week.Examples of units:Can of extra strong lager - 4 unitsBottle of lager - 1.5 unitsSmall pub bottle of wine - 2.25 unitsPub measure of spirits - 1.5 unitsPint of stout - 2.5 unitsPint of cider - 3 unitsFor further information on sensible drinking and alcohol units visit the Public Health Agency's website www.knowyourlimits.info

Smart Schools = Smart Economy

Ireland’s national recovery will be rooted in further developing our outstanding education system. Schools and colleges are key contributors to economic growth and national competitiveness, providing successive generations with the skills and abilities necessary for a vibrant economy and inclusive society. Within the educational system, teachers play a central role in developing the potential of our children and young people. Our education system must continue to be responsive to and supportive of the economic life of this country.

WMR navigation using local potential field corridors and narrow local occupancy grid perception

Path planning and control strategies applied to autonomous mobile robots should fulfil safety rules as well as achieve final goals. Trajectory planning applications should be fast and flexible to allow real time implementations as well as environment interactions. The methodology presented uses the on robot information as the meaningful data necessary to plan a narrow passage by using a corridor based on attraction potential fields that approaches the mobile robot to the final desired configuration. It employs local and dense occupancy grid perception to avoid collisions. The key goals of this research project are computational simplicity as well as the possibility of integrating this method with other methods reported by the research community. Another important aspect of this work consist in testing the proposed method by using a mobile robot with a perception system composed of a monocular camera and odometers placed on the two wheels of the differential driven motion system. Hence, visual data are used as a local horizon of perception in which trajectories without collisions are computed by satisfying final goal approaches and safety criteria