Utilizing the full Capacity of Sorting Systems with new Infeed Technology

Utilisation of sorting systems’ maximum performance demands continuous conveying of goods by infeed lines to sorters. This is the case especially for sorters with one single infeed line, because the sorters’ performance is limited by the performance of the infeed line. Within this paper different infeed line constructions at the Rotary Sorter with diverse performances will be presented. The focus lies on a specific conveying system to synchronise the goods with the sorter by a performance of 6000 pieces per hour with one dynamic infeed line. By this means there is no extensive adjustment control of serial conveyors in the infeed line any longer.

Performance Availability and Anticipatory Change Planning of Intralogistics Systems: A Simulation-Based Approach

In recent years, the ability to respond to real time changes in operations and reconfigurability in equipment are likely to become essential characteristics for next generation intralogistics systems as well as the level of automation, cost effectiveness and maximum throughput. In order to cope with turbulences and the increasing level of dynamic conditions, future intralogistics systems have to feature short reaction times, high flexibility in processes and the ability to adapt to frequent changes. The increasing autonomy and complexity in processes of today’s intralogistics systems requires new and innovative management approaches, which allow a fast response to (un)anticipated events and adaptation to changing environment in order to reduce the negative consequences of these events. The ability of a system to respond effectively a disruption depends more on the decisions taken before the event than those taken during or after. In this context, anticipatory change planning can be a usable approach for managers to make contingency plans for intralogistics systems to deal with the rapidly changing marketplace. This paper proposes a simulation-based decision making framework for the anticipatory change planning of intralogistics systems. This approach includes the quantitative assessments based on the simulation in defined scenarios as well as the analysis of performance availability that combines the flexibility corridors of different performance dimensions. The implementation of the approach is illustrated on a new intralogistics technology called the Cellular Transport System.

Integration of Pasturing Systems for Cattle Finishing Programs—A Progress Report

This progress report is an introduction to a study to evaluate the incorporation of rotational pasturing systems into cattle finishing programs. Because the first year is still in progress and the first trial is not complete, few data are available. However, there is a suggestion that feeding an ionophore to young calves on pasture may result in improved daily gains.

Integration of Pasturing Systems for Cattle Finishing Programs

A 3-year study, using 84 fall-born and 28 spring-born calves of similar genotypes, was conducted to integrate pasturing systems with drylot feeding systems. Calves were started on test following weaning in May and October. Seven treatments were imposed: 1) fall-born calves directly into feedlot; 2 and 3) fall-born calves put on pasture with or without ionophore and moved to the feedlot at the end of July; 4 and 5) fall-born calves put on pasture with or without ionophore and moved to the feedlot at the end of October; 6 and 7) spring-born calves put on pasture with or without ionophore and moved to the feedlot at the end of October. A bromegrass pasture consisting of 16 paddocks, each 1.7 acre in size, was available. Each treatment group had access to 1 paddock at a time and was rotated at approximately 3-day intervals. In the feedlot, steers were provided an 82% concentrate diet containing whole-shelled corn, ground alfalfa hay, and a protein, vitamin and mineral supplement containing ionophore and molasses. As pens of cattle reached about 1150 lb. average live weight, they were processed and carcass traits were evaluated. Pasture daily gains were highest for cattle on pasture for the longest duration (P < .03), and overall daily gains were highest for drylot cattle (P < .01) and decreased with increased time spent on pasture. Although differences among treatments existed in numerical scores for yield and quality grades (P < .05 and P < .03, respectively), all treatments provided average yield grade scores of 2 and quality grades of low Choice or higher. Use of four production costs and pricing scenarios revealed that fall-born calves placed on pasture for varying lengths of time were the most profitable (P < .04) among the treatments. Furthermore, employing a 5% price sensitivity analysis, indicated that fed-cattle selling price had great impact on profit potential and was followed in importance by feeder purchase price and corn grain price. Overall, these findings should provide significant production alternatives for some segments of the cattle feeding industry and also lend substantial credence to the concept of sustainable agriculture.

Integration of Pasturing Systems for Cattle Finishing Programs: A Progress Report

A three-year study was conducted to integrate pasturing systems with drylot feeding systems. Each year 84 fall-born and 28 spring-born calves of similar genotypes were used. Fall-born calves were started on test in May, and spring-born calves were started in October. Seven treatments were imposed: 1) fall-born calves directly into the feedlot (28 steers); 2 and 3) fall-born calves put on pasture with or without an ionophore and moved to the feedlot at the end of July (14 steers in each treatment); 4 and 5) fall-born calves put on pasture with or without an ionophore and moved to the feedlot at the end of October (14 steers in each treatment); and 6 and 7) spring-born calves put on pasture with or without an ionophore and moved to the feedlot at the end of October (14 steers in each treatment). Cattle on pasture receiving an ionophore gained faster (P=.009), but lost this advantage in drylot (P>.10). Overall, cattle started directly in the feedlot had higher gains (P<.001). Cattle receiving an ionophore on pasture had lower KPH than those that did not receive an ionophore (P<.01). Treatment influenced yield grade (P<0.001), although all treatments were YG 2. The percentage of cattle grading Prime and Choice was 75 % or higher for all treatment groups. The results show that using an ionophore improved pasture gains and that pasture treatments did not adversely influence yield and quality grades.

Integration of Pasturing Systems for Cattle Finishing Programs: A Progress Report

This progress report presents the findings of the first two years of a multi-year study. Each year 84 fall-born and 28 spring-born calves of similar genetic background were used to evaluate the incorporation of rotational pasturing systems into cattle finishing programs. The fall-born calves were started on test on May 7, 1996, and May 8, 1997, whereas the spring-born calves were started on test on October 1, 1996, and September 13, 1997. A total of seven treatments were imposed: 1) fall-born calves directly into the feedlot; 2) fall-born calves put on pasture and receiving an ionophore and moved to the feedlot on July 30, 1996, and July 29, 1997 in the first and second years, respectively; 3) fall-born calves put on pasture without an ionophore and moved to the feedlot on July 30, 1996 and July 29, 1997, in the first and second years, respectively; 4) fall-born calves put on pasture and receiving an ionophore and moved to the feedlot on October 22, 1996, and October 21, 1997, in the first and second years, respectively; 5) fall-born calves put on pasture without an ionophore and moved to the feedlot on October 22, 1996, and October 21, 1997, in the first and second years, respectively; 6) spring-born calves put on pasture and receiving an ionophore and moved to the feedlot on October 22, 1996, and October 21, 1997, in the first and second years, respectively; and 7) spring-born calves put on pasture without an ionophore and moved to the feedlot on October 22, 1996, and October 21, 1997, in the first and second years, respectively. Cattle receiving an ionophore on pasture gained more rapidly; however, cattle without access to an ionophore gained more rapidly in drylot thus negating the advantage obtained on pasture. Overall daily gains and feed conversions in drylot only, improved with increasing numbers of days fed in drylot; however, this may not be very cost effective. At similar end weights no real differences were observed in yield grades among the treatments; however, for fall-born calves the percentage grading Prime and Choice was higher for cattle fed longer in drylot.

Integration of Pasturing Systems for Cattle Finishing Programs: A Progress Report

In this study, 84 fall-born and 28 spring-born calves of similar genetic background were used to evaluate the incorporation of rotational pasturing systems into cattle finishing programs. Because the second-year trial is not complete, this report will include only the first year of the five-year study. Seven treatments were imposed: 1) fall-born calves put directly into the feedlot on May 7, 1996; 2) fall-born calves put on pasture and receiving an ionophore and moved to the feedlot on July 30, 3) fall born calves put on pasture on May 7 and not receiving an ionophore and moved to the feedlot on July 30; 4) fall-born calves put on pasture on May 7 and receiving an ionophore and moved to the feedlot on October 22; 5) fall-born calves put on pasture on May 7 and not receiving an ionophore and moved to the feedlot on October 22; 6) spring-born calves put on pasture on October 1 and receiving an ionophore and moved to the feedlot on October 22; and 7) spring-born calves put on pasture on October 1 and not receiving an ionophore and moved to feedlot on October 22. Performance data showed that cattle on pasture receiving an ionophore had higher gains than those not receiving an ionophore on pasture. This trend was reversed in the feedlot period. Yield grades were not greatly influenced by treatment, although quality grades tended to be higher for older cattle and those cattle that were in drylot for a longer period of time.

Does tin pre-treatment enhance the bond strength of adhesive systems to enamel?

OBJECTIVES The study investigated the modification of composite-to-enamel bond strength by pre-treatment of enamel with a concentrated, acidic SnCl2-solution. METHODS Six groups of flat human enamel specimens (n=44 per group) were treated as follows: OB-H: H3PO4 etching, Optibond FL application (primer+adhesive; manufacturer's instructions); OB-S: SnCl2 pre-treatment, Optibond FL application (primer+adhesive); OB-HS: H3PO4 etching+SnCl2 pre-treatment, Optibond FL application (primer+adhesive); CF-N: Clearfil SE application (primer+bond; manufacturer's instructions); CF-H: H3PO4 etching, Clearfil SE application (primer+bond); CF-S: SnCl2 pre-treatment, Clearfil SE application (primer+bond). Enamel specimens were then built up with resin composite (Clearfil Majesty Esthetic) and stored (100% humidity, 37 °C, 1 week). μTBS-measurement and failure mode analysis of one-half of the specimens were performed immediately after storage, while the other half was analysed after a thermocycling procedure (8500 cycles; 5 °C and 55 °C; dwell time 30s). Additional specimens were prepared for SEM- and EDX-analysis. RESULTS Highest values were measured for OB-H before and after thermocycling, lowest values for CF-N. Compared to OB-H treatment, OB-S treatment reduced μTBS before/after thermocycling by 23%/28% and OB-HS treatment by 8%/24% (except for OB-SH before (n.s.), all p≤0.001 compared to OB-H). In the Clearfil SE treated groups pre-treatment increased μTBS significantly compared to CF-N (before/after: CF-H: +46%/+70%; CF-S: +51%/42%; all p≤0.001). CONCLUSION Pre-treatment with H3PO4 or SnCl2 markedly increased the μTBS of Clearfil SE to enamel. However, thermocycling partly reduced the gain in μTBS obtained by SnCl2 pre-treatment. CLINICAL SIGNIFICANCE The application of an acidic and highly concentrated SnCl2 solution is a good option to increase the μTBS between enamel and a resin composite mediated by an adhesive system containing the multifunctional monomer MDP.

DEVELOPING A METHOD FOR IDENTIFYING AND REDUCING FUNCTIONAL DISCREPANCIES OF INFORMATION SYSTEMS

Currently more than half of Electronic Health Record (EHR) projects fail. Most of these failures are not due to flawed technology, but rather due to the lack of systematic considerations of human issues. Among the barriers for EHR adoption, function mismatching among users, activities, and systems is a major area that has not been systematically addressed from a human-centered perspective. A theoretical framework called Functional Framework was developed for identifying and reducing functional discrepancies among users, activities, and systems. The Functional Framework is composed of three models – the User Model, the Designer Model, and the Activity Model. The User Model was developed by conducting a survey (N = 32) that identified the functions needed and desired from the user’s perspective. The Designer Model was developed by conducting a systemic review of an Electronic Dental Record (EDR) and its functions. The Activity Model was developed using an ethnographic method called shadowing where EDR users (5 dentists, 5 dental assistants, 5 administrative personnel) were followed quietly and observed for their activities. These three models were combined to form a unified model. From the unified model the work domain ontology was developed by asking users to rate the functions (a total of 190 functions) in the unified model along the dimensions of frequency and criticality in a survey. The functional discrepancies, as indicated by the regions of the Venn diagrams formed by the three models, were consistent with the survey results, especially with user satisfaction. The survey for the Functional Framework indicated the preference of one system over the other (R=0.895). The results of this project showed that the Functional Framework provides a systematic method for identifying, evaluating, and reducing functional discrepancies among users, systems, and activities. Limitations and generalizability of the Functional Framework were discussed.

New Patterns of Democracy in the Countries of the Comparative Study of Electoral Systems

The chapter introduces a new database on political-institutional patterns of democracy used in the contributions to the book. It provides an update and extension of Lijphart’s (1999, 2012) measurement of consensus and majoritarian democracy for the countries of the second wave of the CSES during the period 1997–2006, using 11 partly improved indicators. The chapter explores patterns of democracy by the means of factor analysis, construct additive indices, and present the resulting country scores of consensus and majoritarian democracy graphically. Two variants are presented, one featuring Lijphart’s (1999) classic ‘executives–parties’ and ‘federal–unitary’ dimensions, and another incorporating direct democracy into the framework, yielding an additional ‘cabinets–direct democracy’ dimension

An Application-Layer RESTful Sleepy Nodes Implementation For Internet of Things Systems

Two of the main issues in wireless industrial Internet of Things applications are interoperability and network lifetime. In this work we extend a semantic interoperability platform and introduce an application-layer sleepy nodes protocol that can leverage on information stored in semantic repositories. We propose an integration platform for managing the sleep states and an application layer protocol based upon the Constraint Application Layer protocol. We evaluate our system on windowing based task allocation strategies, aiming for lower overall energy consumption that results in higher network lifetime.

The Marginal Impact of ENGOs in Different Types of Democratic Systems

Conventional wisdom suggests that environmental non-governmental organizations (ENGOs) play a major role in pushing states towards more ambitious environmental policies. However, demonstrating that this presumption is in fact true is rather difficult, because the same system structures of democracies that may create more opportunities for ENGO activities are also, on their own, conducive to better environmental policies. This leaves open the possibility that the additional (marginal) impact of ENGOs on policy making is smaller than presumed. In trying to disentangle these effects, this paper examines the influence of ENGOs contingent on key structural characteristics of democratic systems. We develop the argument that presidential systems with a plurality electoral rule per se tend to provide more environmental public goods, which induces a smaller marginal impact of ENGOs. Conversely, parliamentary systems with a proportional representation electoral rule are likely to provide fewer environmental public goods, which allows for a larger marginal impact of ENGOs. We find robust empirical support for these hypotheses in analyses that focus on the ratification behavior of 75 democracies vis-à-vis 250 international environmental agreements in 1973–2002.

A study of the relationship of support systems and adolescent pregnancy outcomes in an adolescent family life project

This study analyzed the relationship of family support systems and adolescent pregnancy outcomes. The population for the study was 390 adolescents who had attended the Marion County Health Department Adolescent Family Life Project in Indianapolis, Indiana during a two-year period.^ The study is unique in that it afforded the opportunity to compare adolescent pregnancy-related characteristics, of white and non-white adolescents in the same study.^ The pregnancy outcomes studied were: Infant birthweight, school attendance, and pregnancy recidivism.^ Significant results were found in the analysis that supported other research in regard to factors that are associated with school attendance when family support, adolescent's age, and ethnicity were controlled. Infant birthweight and repeat pregnancy outcome relationships were not found to have any consistently significant relationship with independent variables anticipated to be associated. However, the comparisons of infant birthweight among the adolescents with, and without, family support, by ethnicity resulted in some interesting findings. Repeat pregnancy proved an enigma, in that there seemed to be almost no variables in this study that were associated with the adolescent having a repeat pregnancy.^ Familial support in this study seemed to be of less importance as a factor in adolescent pregnancy outcomes than was ethnicity. The non-white adolescents in this study had a better record for remaining in school, both those non-white adolescents who lived with parents, and those who did not live with parents. More low birthweight occurred in the non-white adolescent, both those adolescents who lived with parents, and those who did not live with parents. Repeat pregnancy occurred more in the non-white adolescent whether she lived with parents, or did not live with parents. ^