3D scaffold alters cellular response to graphene in a polymer composite for orthopedic applications

Graphene-based polymer nanocomposites are being studied for biomedical applications. Polymer nanocomposites can be processed differently to generate planar two-dimensional (2D) substrates and porous three-dimensional (3D) scaffolds. The objective of this work was to investigate potential differences in biological response to graphene in polymer composites in the form of 2D substrates and 3D scaffolds. Polycaprolactone (PCL) nanocomposites were prepared by incorporating 1% of graphene oxide (GO) and reduced graphene oxide (RGO). GO increased modulus and strength of PCL by 44 and 22% respectively, whereas RGO increased modulus and strength by 22 and 16%, respectively. RGO increased the water contact angle of PCL from 81 degrees to 87 degrees whereas GO decreased it to 77 degrees. In 2D, osteoblast proliferated 15% more on GO composites than on PCL whereas RGO composite showed 17% decrease in cell proliferation, which may be attributed to differences in water wettability. In 3D, initial cell proliferation was markedly retarded in both GO (36% lower) and RGO (55% lower) composites owing to increased roughness due to the presence of the protruding nanoparticles. Cells organized into aggregates in 3D in contrast to spread and randomly distributed cells on 2D discs due to the macro-porous architecture of the scaffolds. Increased cell-cell contact and altered cellular morphology led to significantly higher mineralization in 3D. This study demonstrates that the cellular response to nanoparticles in composites can change markedly by varying the processing route and has implications for designing orthopedic implants such as resorbable fracture fixation devices and tissue scaffolds using such nanocomposites. (c) 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 104B: 732-749, 2016.

Biological application of multi-component nanowires in hybrid devices powered by F-1-ATPase motors

In this paper, construction of hybrid device by integrating nanowires with F1-ATPase motors is described. The nickel nanowires and multi-segment nanowires, including gold and nickel, were fabricated by electrochemical deposition in nanoporous templates. The nickel nanowires functionalized by biotinylated peptide can be assembled directly onto F1-ATPase motors to act as the propellers. If the multicomponent nanowires, including gold and nickel, were selectively functionalized by the thiol group modified ssDNA and the synthetic peptide, respectively, the biotinylated F1- ATPase motors can be attached to the biotinylated peptide on nickel segment of the nanowires. Then, the multi-component nanowires can also be used as the propellers, and one may observe the rotations of the multi-component nanowires driven by F1-ATPase motors. Therefore, introduction of multiple segments along the length of a nanowire can lead to a variety of multiple chemical functionalities, which can be selectively bound to cells and special biomolecules. This method provides an insight for the construction of other hybrid devices with its controlling arrangement of different biomolecule on designed nanometer scale structures.

Correct biological timing in Arabidopsis requires multiple light-signaling pathways.

Circadian oscillators provide rhythmic temporal cues for a range of biological processes in plants and animals, enabling anticipation of the day/night cycle and enhancing fitness-associated traits. We have used engineering models to understand the control principles of a plant's response to seasonal variation. We show that the seasonal changes in the timing of circadian outputs require light regulation via feed-forward loops, combining rapid light-signaling pathways with entrained circadian oscillators. Linear time-invariant models of circadian rhythms were computed for 3,503 circadian-regulated genes and for the concentration of cytosolic-free calcium to quantify the magnitude and timing of regulation by circadian oscillators and light-signaling pathways. Bioinformatic and experimental analysis show that rapid light-induced regulation of circadian outputs is associated with seasonal rephasing of the output rhythm. We identify that external coincidence is required for rephasing of multiple output rhythms, and is therefore important in general phase control in addition to specific photoperiod-dependent processes such as flowering and hypocotyl elongation. Our findings uncover a fundamental design principle of circadian regulation, and identify the importance of rapid light-signaling pathways in temporal control.

Spark plasma sintering of TiNi nano-powders for biological application

Nano-sized TiNi powder with an average size of 50nm was consolidated using spark plasma sintering (SPS) at 800 °C for 5min. A layer of anatase TiO 2 coating was formed on the sintered TiNi by chemical reaction with a hydrogen peroxide (H2O2) solution at 60 °C followed by heat treatment at 400 °C to enhance the bioactivity of the metal surface. Cell culture using osteoblast cells and a biomimetic test in simulated body fluid proved the biocompatibility of the chemically treated SPS TiNi. © IOP Publishing Ltd.

Biological Studies. Annual Report, Part 5, September 1972

(54 page document)

A report of biological observations at Topanga artificial reef and Santa Monica Bay artificial reef

(Document pdf contains 25 pages)

Biological surveys of five southern artificial reefs: Oceanside #1, Oceanside #2, Carlsbad, Pacific Beach, and Mission Bay

(Document pdf contains 19 pages)

Observations of the biological communities at Bolsa Chica artificial reef

Bolsa Chica Artificial Reef (BCAR) was constructed in November 1986 with 10,400 tons of concrete rubble and eight concrete and steel barges. Prior to any additional augmentation of BCAR, the u.s. Army Corps of Engineers and the California Coastal Commission required the California Department of Fish and Game (CDFG) to survey the bioloqical communities on and around BCAR. In April 1992, qualitative surveys of the biological communities were conducted on one of the eight modules at BCAR and at a nearby sand-only site. One of the modules, Module D, located in 90 feet of water (MLLW), was surveyed for fish, macroinvertebrates, and turf community organisms (small plants and sessile animals). Twelve species of fish were observed, including kelp bass (Paralabrax clathratus) and barred sand bass (P. nebulifer). Eight macroinvertebrate species were observed, rock scallops (Crassedoma giganteum) being the most abundant. The turf community was comprised of thirteen invertebrate taxa, among which erect ectoprocts (Bugula spp.) were the most numerous. Two species of foliose red algae (Rhodymenia pacifica and Anisocladella pacifica) were also observed. The reef has reached an advanced stage of successional development with fish and invertebrate communities diverse and well established. However, due,.to its depth and the turbidity of surrounding waters, this reef is not likely to ever support a diverse algal community. The diversity and abundance of fish and macroinvertebrates were, as to be expected, much lower in the nearby sand-only site. Only two species of fish and seven macroinvertebrate species were observed. Of these, only the sea pen, Stylatula elongata, was common. Overall, when compared to nearby sand-only habitats, Bolsa Chica Artificial Reef appears to contribute substantially to the local biological productivity. In addition, the concrete rubble used in BCAR' s construction appears to be performing as well as the quarry rock used in all of CDFG's experimental reefs. (Document pdf contains 22 pages)

A report of biological observations at Pacific Beach artificial reef, Oceanside artificial reef, and Santa Monica Bay artificial reef

(Document pdf contains 16 pages)

A report of biological observations at Oceanside #1 and #2 artificial reefs, Carlsbad artificial reef, Pacific Beach artificial reef, and Mission Bay Park artificial reef

(Document pdf contains 22 pages)