Topographic optical profilometry of steep slope micro-optical transparent surfaces

Optical profilometers based on light reflection may fail at surfaces presenting steep slopes and highly curved features. Missed light, interference and diffraction at steps, peaks and valleys are some of the reasons. Consequently, blind areas or profile artifacts may be observed when using common reflection micro-optical profilometers (confocal, scanning interferometers, etc…). The Topographic Optical Profilometry by Absorption in Fluids (TOPAF) essentially avoids these limitations. In this technique an absorbing fluid fills the gap between a reference surface and the surface to profile. By comparing transmission images at two different spectral bands we obtain a reliable topographic map of the surface. In this contribution we develop a model to obtain the profile under micro-optical observation, where high numerical aperture (NA) objectives are mandatory. We present several analytical and experimental results, validating the technique’s capabilities for profiling steep slopes and highly curved micro-optical surfaces with nanometric height resolution.

Estudo da síntese e sinterização de pós compósitos do sistema Ta-Cu

Ta-Cu bulk composites combine high mechanical resistance of the Ta with high electrical and thermal conductivity of the Cu. These are important characteristics to electrical contacts, microwave absorber and heat skinks. However, the low wettability of Ta under Cu liquid and insolubility mutual these elements come hard sintering this composite. High-energy milling (HEM) produces composite powders with high homogeneity and refines the grain size. This work focus to study Ta-20wt%Cu composite powders prepared by mechanical mixture and HEM with two different conditions of milling in a planetary ball mill and then their sintering using hydrogen plasma furnace and a resistive vacuum furnace. After milling, the powders were pressed in a steel dye at a pressure of 200 MPa. The cylindrical samples pressed were sintered by resistive vacuum furnace at 10-4torr with a sintering temperature at 1100ºC / 60 minutes and with heat rate at 10ºC/min and were sintered by plasma furnace with sintering temperatures at 550, 660 and 800ºC without isotherm under hydrogen atmosphere with heat rate at 80ºC/min. The characterizations of the powders produced were analyzed by scanning electron microscopy (SEM), x-ray diffraction (XRD) and laser granulometry. After the sintering the samples were analyzed by SEM, XRD and density and mass loss tests. The results had shown that to high intense milling condition produced composite particles with shorter milling time and amorphization of both phases after 50 hours of milling. The composite particles can produce denser structure than mixed powders, if heated above the Cu melting point. After the Cu to arrive in the melting point, liquid copper leaves the composite particles and fills the pores

Prescrição de exercício e lecionação de aulas individuais no ginásio Eugénios HC & SPA Club

O presente relatório de estágio enquadra-se no âmbito do mestrado em Exercício e Saúde da Universidade de Évora. Estágio que decorreu no Eugénios Health Club & SPA Club. Com este relatório pretende-se essencialmente, fazer uma ponte entre a componente académica e prática comum na área do desporto. Este estágio final de ano, teve como principal objetivo aplicar os conhecimentos e capacidades adquiridas ao longo de todo o percurso académico, assim como desenvolver as competências pessoais e profissionais, de forma a que o ponto de partida para um currículo profissional seja o mais real possível para integração do mercado de trabalho. Este relatório, encontra-se estruturado de forma a descrever as atividades planeadas e desenvolvidas ao longo do estágio. Desta forma estão relatadas as tarefas inicialmente definidas (responsável por acompanhamento na sala de Cardio-Musculação, aulas de natação e realização de aulas de Hidroginástica, bem como as atividades complementares); ABSTRACT: The present internship report fills in the ambit of the master’s degree in Health and Exercise at the Universidade de Évora. This internship occurred at the Eugénios Health & SPA Club. This report aims essentially to make a bridge between the academic and practice components in the sport area. This final internship had the main goal of applying the knowledge and acquired skills throughout the academic path as well the development of the personal and professional abilities, so that the starting point of the professional resume could be as real as possible for a future integration in the employment market. This report finds itself structured to describe the planned and developed activities over the year, making a passage through the theory learned. This way the initial defined tasks are reported – monitoring the cardio/bodybuilding room; organization and execution of different levels of swimming classes; executing water aerobics classes as other complementary activities.

A Performance Management Framework for Managing Sustainable Collaborative Enterprise Networks

Part 15: Performance Management Frameworks

Adição de subprodutos da cinza da casca de café (coffea canephora) em massa cerâmica para porcelanato

To produce porcelain tiles fluxing agents are used in order to obtain a liquid phase during firing. This liquid phase fills the pores decreasing porosity, water absorption and contributes to material densification. In the porcelain tiles industry, feldspar is the main flux material used, with quantities ranging between 35 and 50%. Studies focus on the discovery of materials with flux characteristics that can reduce the consumption of feldspar by porcelain tiles industry. In this context, the coffee husk ashes, a residue obtained when coffee husks are burned to produce heat for the dryers during the processing of the green fruit, have as main chemical constituents potassium, calcium and magnesium, giving them characteristics of fluxing material. Brazil is the largest coffee producer in the world and is responsible for over 30% of the world s production. In this work a physical treatment of coffee husk ash was carried out in order to eliminate the organic matter and, after this, two by-products were obtained: residual wastes R1 and R2. Both residues were added separately as single fluxes and also in association with feldspar in mixtures with raw materials collected in a porcelain industry located in Dias d Ávila-Ba. The addition of these residues aimed to contribute to the reduction of the consumption of feldspar in the production of porcelain tiles. Specimens were produced with dimensions of 60 mm x 20 mm x 6 mm in an uniaxial die with compacting pressure of 45 MPa. The samples were heated to a temperature of 1200 °C, for 8 minutes. Tests were performed to characterize the raw materials by XRF, XRD, particle size analysis, DTA and TGA and, additionally, the results of the physical properties of water absorption, apparent porosity, linear shrinkage, density, dilatometry, flexural strength and SEM of sintered body were analyzed. Additions of less than 8% of the residue R1 contributed to the decrease of porosity, but the mechanical strength of the samples was not satisfactory. Additions of 5% the R2 residue contributed significantly to decrease the water absorption and apparent porosity, and also to increase the mechanical strength. Samples with addition of feldspar associated with the R2 residue, in proportions of 6.7% of R2 and 6.7% of feldspar, led to results of water absorption of 0.12% and mechanical strength of 46 MPa, having parameters normalized to the manufacture of porcelain stoneware tiles

SECURITY, PRIVACY AND APPLICATIONS IN VEHICULAR AD HOC NETWORKS

With wireless vehicular communications, Vehicular Ad Hoc Networks (VANETs) enable numerous applications to enhance traffic safety, traffic efficiency, and driving experience. However, VANETs also impose severe security and privacy challenges which need to be thoroughly investigated. In this dissertation, we enhance the security, privacy, and applications of VANETs, by 1) designing application-driven security and privacy solutions for VANETs, and 2) designing appealing VANET applications with proper security and privacy assurance. First, the security and privacy challenges of VANETs with most application significance are identified and thoroughly investigated. With both theoretical novelty and realistic considerations, these security and privacy schemes are especially appealing to VANETs. Specifically, multi-hop communications in VANETs suffer from packet dropping, packet tampering, and communication failures which have not been satisfyingly tackled in literature. Thus, a lightweight reliable and faithful data packet relaying framework (LEAPER) is proposed to ensure reliable and trustworthy multi-hop communications by enhancing the cooperation of neighboring nodes. Message verification, including both content and signature verification, generally is computation-extensive and incurs severe scalability issues to each node. The resource-aware message verification (RAMV) scheme is proposed to ensure resource-aware, secure, and application-friendly message verification in VANETs. On the other hand, to make VANETs acceptable to the privacy-sensitive users, the identity and location privacy of each node should be properly protected. To this end, a joint privacy and reputation assurance (JPRA) scheme is proposed to synergistically support privacy protection and reputation management by reconciling their inherent conflicting requirements. Besides, the privacy implications of short-time certificates are thoroughly investigated in a short-time certificates-based privacy protection (STCP2) scheme, to make privacy protection in VANETs feasible with short-time certificates. Secondly, three novel solutions, namely VANET-based ambient ad dissemination (VAAD), general-purpose automatic survey (GPAS), and VehicleView, are proposed to support the appealing value-added applications based on VANETs. These solutions all follow practical application models, and an incentive-centered architecture is proposed for each solution to balance the conflicting requirements of the involved entities. Besides, the critical security and privacy challenges of these applications are investigated and addressed with novel solutions. Thus, with proper security and privacy assurance, these solutions show great application significance and economic potentials to VANETs. Thus, by enhancing the security, privacy, and applications of VANETs, this dissertation fills the gap between the existing theoretic research and the realistic implementation of VANETs, facilitating the realistic deployment of VANETs.

A holistic approach for the investigation of bee health

Despite current evidence is in strong disagreement with an emergency for the conservation of Apis mellifera, great concern is related to profitability of beekeeping operations. A growing involvement of veterinary science in addressing bee health topics will therefore be fundamental to preserve and protect the entire sector. The experiments in this thesis focused on two different and interdependent levels related to bee health: the biochemical level and the parasitological level. At the biochemical level the impact of plant protection products on bee physiology and survival was studied, elucidating synergistic interactions between poor nutrition and pesticide exposure in A. mellifera and between an insecticide and a fungicide in Osmia bicornis. Moreover, an innovative fingerprinting approach on honey bee haemolymph was applied to detect population imbalances in the hive. The control of Varroa infestations was studied both at the biochemical and parasitological level. A panel of biomarkers in honey bee haemolymph was applied to compare different mite control protocols. This resulted in relevant indications for beekeeping operations pursuing the least impact on nutritional status of the colonies. To guide the decision making of beekeepers, a new formic acid evaporator was tested in comparison with a more established one. Considering its widespread distribution in the country, efforts were directed also towards N. ceranae. In particular, the pivotal aspect of diagnosis was studied, proposing a new qPCR method to overcome some limits of the existing ones. In conclusion, this works fills some of the knowledge gaps of the beekeeping sector. However, many of them still need to be addressed and the upcoming menaces of climate change and dispersal of pathogens via globalization should be targeted by research efforts in the near future. Therefore, a multifaceted vision of bee health is of capital importance, aware of the complementarity of reductionist and holistic approaches.