Miocene flora and paleoclimate estimations of Schrotzburg, South Germany

We present a detailed palaeoclimate analysis of the Middle Miocene (uppermost Badenian-lowermost Sarmatian) Schrotzburg locality in S Germany, based on the fossil macro- and micro-flora, using four different methods for the estimation of palaeoclimate parameters: the coexistence approach (CA), leaf margin analysis (LMA), the Climate-Leaf Analysis Multivariate Program (CLAMP), as well as a recently developed multivariate leaf physiognomic approach based on an European calibration dataset (ELPA). Considering results of all methods used, the following palaeoclimate estimates seem to be most likely: mean annual temperature ~15-16°C (MAT), coldest month mean temperature ~7°C (CMMT), warmest month mean temperature between 25 and 26°C, and mean annual precipiation ~1,300 mm, although CMMT values may have been colder as indicated by the disappearance of the crocodile Diplocynodon and the temperature thresholds derived from modern alligators. For most palaeoclimatic parameters, estimates derived by CLAMP significantly differ from those derived by most other methods. With respect to the consistency of the results obtained by CA, LMA and ELPA, it is suggested that for the Schrotzburg locality CLAMP is probably less reliable than most other methods. A possible explanation may be attributed to the correlation between leaf physiognomy and climate as represented by the CLAMP calibration data set which is largely based on extant floras from N America and E Asia and which may be not suitable for application to the European Neogene. All physiognomic methods used here were affected by taphonomic biasses. Especially the number of taxa had a great influence on the reliability of the palaeoclimate estimates. Both multivariate leaf physiognomic approaches are less influenced by such biasses than the univariate LMA. In combination with previously published results from the European and Asian Neogene, our data suggest that during the Neogene in Eurasia CLAMP may produce temperature estimates, which are systematically too cold as compared to other evidence. This pattern, however, has to be further investigated using additional palaeofloras.

Morphometry and microphotographs of devonian stromatoporoids from southern Poland

Famennian Stromatoporoidea from the Quasiendothyra communis Foraminiferal Zone and slightly younger strata from the Debnik anticline, southern Poland, form a succession of three consecutive assemblages. Assemblages 1 and 3 consist of representatives of the order Clathrodictyida, while assemblage 2 is dominated by the order Labechiida. The clathrodictyids are represented by the genus Gerronostroma, and labechiids are represented by the genus Stylostroma. Species assigned here to the genus Gerronostroma show a network of amalgamated pillars in the central part of the columns, a feature regarded by previous authors as typical of the genus Clavidictyon. Two new species, Stylostroma multiformis sp. nov. and Gerronostroma raclaviense sp. nov., are described. Stromatoporoids from southern Poland differ from the Famennian fauna of western Europe, showing affinity to eastern European and Siberian Stromatoporoidea.

Essays on Inequality and Integration

Inequality and integration have been sociology’s two key paradigms since the classics, associated with the names of Marx and Durkheim and Europe’s current economic crisis has forcefully reinvigorated their joint relevance. Above all, the debt crisis has fueled the wheel of social inequality: cash-starved states are further forced to cut back on public expenditures, to minimize the margin for redistribution and to raise new challenges for the integration policies addressing the emerging disparities. At the same time, global environmental and demographic problems, intertwined with escalating migration pressure, tear at the texture of European and all Western societies, in particular, the unequal impact of climate change and the unequal distribution of population growth make migration and integration paramount public policy issues and a soaring source of social conflict. In principle, the inequalities engendered by these cascading processes are also an opportunity. They increase the diversity of society and can bring about innovation and growth. Our desire and ability for social integration depends, above all, on the ultimate balance between these advantages and disadvantages. The chapters in the volume concentrate on the opportunities as well as the risks associated with these social changes from various angles. They are a handpicked set of outstanding contributions from the Congress of the Swiss Sociological Association that took place at the University of Bern, June 26–28, 2013.

Legal Aspects which Implement Good Practice Measures in the Management of Construction and Demolition Waste

The construction industry, one of the most important ones in the development of a country, generates unavoidable impacts on the environment. The social demand towards greater respect for the environment is a high and general outcry. Therefore, the construction industry needs to reduce the impact it produces. Proper waste management is not enough; we must take a further step in environmental management, where new measures need to be introduced for the prevention at source, such as good practices to promote recycling. Following the amendment of the legal frame applicable to Construction and Demolition Waste (C&D waste), important developments have been incorporated in European and International laws, aiming to promote the culture of reusing and recycling. This change of mindset, that is progressively taking place in society, is allowing for the consideration of C&D waste no longer as an unusable waste, but as a reusable material. The main objective of the work presented in this paper is to enhance C&D waste management systems through the development of preventive measures during the construction process. These measures concern all the agents intervening in the construction process as only the personal implication of all of them can ensure an efficient management of the C&D waste generated. Finally, a model based on preventive measures achieves organizational cohesion between the different stages of the construction process, as well as promoting the conservation of raw materials through the use and waste minimization. All of these in order to achieve a C&D waste management system, whose primary goal is zero waste generation

Desarrollo experimental de un elemento constructivo de envolvente, no estructural, a partir de una matriz de plástico reciclado, reforzado con fibras naturales y/o sintéticas

Esta Tesis trata sobre el diseño y desarrollo de un material constructivo de fachada (tras ventilada), empleando plástico reciclado (granza de caucho, de neumáticos fuera de uso) para su elaboración. El uso de materiales reciclados para la elaboración de nuevos materiales constructivos, es a día de hoy, un valor agregado que contribuye tanto a la disminución de desechos tóxicos, como a la fabricación de productos de alta calidad. La investigación partió de la necesidad de comprender qué es un plástico, cómo son producidos, cuáles son los factores que permitían su reciclaje y qué propiedades podrían ser aprovechadas para desarrollar un nuevo material constructivo. En el estado del arte, fueron analizados los aspectos del plástico relacionados a su composición, propiedades, tipologías, producción, consumo, legislación europea y española, reciclaje y valorización energética. Para analizar más profundamente los materiales desarrollados a partir de plásticos reciclados, desde textiles hasta elementos constructivos. Con el conocimiento adquirido mediante este análisis previo, se diseñó una metodología de experimentación, utilizando caucho reciclado y derivados del yeso como agregados, en una matriz de resinas poliméricas reforzada con fibras naturales y sintéticas. Los resultados obtenidos en los ensayos físicos y térmicos, con los elementos producidos, demostraron que el material tiene una excelente resistencia a tensión así como una baja conductividad térmica. Esta investigación, servirá como precedente para el desarrollo de nuevos materiales y sistemas constructivos, utilizando agregados de plástico reciclado, en los procesos de fabricación. Ya que ha comprobado el enorme potencial que ofrecen, creando nuevos materiales, y contribuyendo a reducir la contaminación medio ambiental. "La mayor recompensa de nuestro trabajo no es lo que nos pagan por él, sino aquello en lo que nos convierte". John Ruskin Material compuesto (Composite) de caucho reciclado, fibras y resinas poliméricas. ABSTRACT This thesis deals with the design and development of a new facade construction material using recycled plastic (rubber pellets from used tires) for processing. The use of recycled materials for the development of new building materials, today is an added value which contributes both to the reduction of toxic waste, as well as the processing of products of good quality. The research derives from the need to understand what a plastic is, how they are produced, what the factors that allowed recycling are and what properties can be exploited to develop a new building material. In the prior art, were analyzed plastic aspects related to its composition, properties, typologies, production, consumption, European and Spanish legislation, recycling and energy recovery. To further analyze the materials developed from recycled plastics, from textiles to construction elements. With the knowledge gained from this previous analysis, we designed an experimental approach using recycled rubber and plaster derivatives as aggregates in a polymeric resin matrix reinforced with natural and synthetic fibers. The results obtained in physical and thermal testing, with the elements produced, showed that the material has excellent tensile strength and a low thermal conductivity. This research will serve as a precedent for the development of new materials and building systems, using recycled plastic aggregates in the manufacturing processes. Since it was found the enormous potential, creating new materials, and helping reduce environmental pollution. "The greatest reward of our work is not what we get paid for it, but what they make us."

The european project NURISP for nuclear reactor simulation

The NURISP project aims at developing the European NURESIM reference simulation platform [1] for nuclear reactor. A first version of NURESIM was delivered in 2008. 22 organizations from 14 European countries contribute to the further development of this platform. NURISP also includes a User’s Group (UG) whose members are not NURISP partners and come from the industrial nuclear sector or European and non-European R&D labs. Users can benefit from the use of the NURESIM platform, methods, results and modules and they provide concrete input and feedback on the use of these elements.

NGCPV: a new generation of concentrator photovoltaic cells, modules and systems

Starting on June 2011, NGCPV is the first project funded jointly between the European Commission (EC) and the New Energy and Industrial Technology Development Organization (NEDO) of Japan to research on new generation concentration photovoltaics (CPV). The Project, through a collaborative research between seven European and nine Japanese leading research centers in the field of CPV, aims at lowering the cost of the CPVproduced photovoltaic kWh down to 5 ?cents. The main objective of the project is to improve the present concentrator cell, module and system efficiency, as well as developing advanced characterization tools for CPV components and systems. As particular targets, the project aims at achieving a cell efficiency of at least 45% and a CPV module with an efficiency greater than 35%. This paper describes the R&D activities that are being carried out within the NGCPV project and summarizes some of the most relevant results that have already been attained, for instance: the manufacturing of a 44.4% world record efficiency triple junction solar cell (by Sharp Corp.) and the installation of a 50 kWp experimental CPV plant in Spain, which will be used to obtain accurate forecasts of the energy produced at system level.

Terasense WP03 radiation and sensor measurement lab workpackage

This paper explains the progress accomplished in the WP03 of the Terasense Project (TERAHERTZ TECHNOLOGY FOR ELECTROMAGNETIC SENSING APPLICATIONS) approved in the 2008 CONSOLIDERINGENIO program (project CSD2008-0068). The Radiation and Sensor Measurement Lab (RSMLab) is a laboratory based in the existing antenna measurement laboratories at UPM, UC3 and UNiOvi and the new capacities to extend the measurement range from the millimetre wave to the THz region. This laboratory is intended to be shared in more than one place and with more than one institution, in such a way that we could take advantage of other research financial sources and contributions from other institutions with interest in the same field of measurements. One important task will be the international links between the RSMLab and other European and international institutions dedicated to the antenna and sensor measurement in the same frequency range.

La Revista El Arquitecto Peruano: reseña de la Cultura Arquitectónica del Perú 1937/1977

La tesis se centra en el análisis de 356 números de la revista El Arquitecto Peruano publicados entre 1937 y 1977. La revista fue fundada en agosto de 1937 por Fernando Belaúnde Terry, arquitecto graduado en la University of Texas at Austin en 1935 quien la dirigió por 25 años hasta marzo de 1963. Desde abril de 1963 la dirige Miguel Cruchaga Belaunde. Durante esta última etapa la revista deja de ser regular, publicándose intermitentemente con varios años sin editarse, hasta desaparecer finalmente en 1977. La revista es la publicación periódica de arquitectura más importante del siglo XX en el Perú. La investigación ubica a la revista en el contexto nacional donde se desarrolló vinculando además los diversos eventos de la arquitectura y el urbanismo del panorama internacional sucedidos durante las tres décadas de estudio. El trabajo empieza por establecer una secuencia de periodos. Esta se basa en la identificación de una estructura fija existente en la revista conformada por las secciones permanentes. Una paulatina inserción de secciones temporales fue complementando y detallando nuevas temáticas y contenidos generando variantes de la estructura fija a lo largo del tiempo. Como resultado de este proceso se reconocen 5 periodos vinculados a una serie de temas vertebrales durante la dirección de Fernando Belaunde: Periodo 1 (Agosto de 1937 a marzo de 1942). Vivienda Unifamiliar. Periodo 2 (Abril de 1942 a mayo de 1944). Urbanismo moderno. Periodo 3 (Junio de 1944 a diciembre de 1949). Vivienda Colectiva. Periodo 4 (Enero-febrero de 1950 a enero-febrero de 1956). Proyectos y obras. Periodo 5 (Marzo-abril de 1956 a enero-febrero-marzo de 1963). Territorio. Los años finales bajo la dirección de Miguel Cruchaga conforman el último Periodo. En la década de los treinta, durante el primer periodo se analiza el rol que un grupo de revistas de arquitectura europeas y norteamericanas tuvieron en la construcción formal y temática de El Arquitecto Peruano. En sus inicios existen influencias de The Architectural Forum, The American Architect, Architecture, California Arts and Architecture y Architectural Digest . Y junto a estas, las revistas alemanas Moderne Bauformen e Innen Dekoration. A raíz de la Segunda Guerra Mundial, las referencias a las revistas alemanas desaparecen y las relaciones con Estados Unidos se intensifican por la posición del Perú dentro del área de influencia norteamericana. El canal de las revistas no fue el único medio de influencia, durante los años cuarenta hubo un marco de apertura hacia Latinoamérica que incluyó viajes de cooperación de arquitectos norteamericanos por el sur del continente. Como parte de estos vínculos, en 1945 Paul Lester Wiener de Town Planning Associates y Richard Neutra, - ambos miembros del CIAM y el segundo Presidente del CIAM USA- prestaron asistencia a la iniciativa más importante promovida por la revista peruana, un proyecto de vivienda popular para obreros y empleados llamado el Plan Peruano. La revista tuvo siempre una fuerte actitud de cambio de la realidad existente en el medio peruano. Para modelar su nueva versión de la realidad instrumentó una serie de campañas de prensa. En la más importante utilizó las ideas del urbanismo moderno que circulaban durante la guerra nacidas en los CIAM de entreguerras. El Arquitecto Peruano aprovecha la coyuntura de los primeros años de la posguerra para canalizar sus iniciativas, tomando como modelo de su propuesta la idea de la Neighborhood Unit, convirtiéndolo en proyecto y finalmente construyendo la Unidad Vecinal N°3, el proyecto de mayor escala asociado con la revista. A esta perspectiva favorable para las ideas vertidas por la publicación se une el hecho de que su Director, es elegido Diputado por Lima y es un miembro muy cercano al gobierno de turno que dio la cobertura legal y de gestión para cristalizar los proyectos desde 1945 hasta 1948. Durante este periodo se producen las propuestas de mayor alcance promovidas por Fernando Belaunde y difundidas por la revista, como el propio Plan Peruano de Vivienda, los Centros Climáticos de Invierno, el Plan Piloto de Lima y los Concursos de Vivienda popular. Existe un trabajo anterior sobre la revista, restringido al campo del urbanismo realizado en 1992 por el historiador Antonio Zapata y titulado El joven Belaunde: Historia de la revista El Arquitecto Peruano en donde se inclina el peso de la revista hacia la Vivienda Social y se señala a Walter Gropius como el arquitecto más influyente en la publicación. La presente tesis plantea que el Plan Peruano es la punta del iceberg, pero que todos estos proyectos relacionados con la revista, conforman un conjunto indisoluble y que el paquete completo tiene una directa influencia de proyectos, ideas y labor editorial de José Luis Sert desarrollada desde finales de los años veinte hasta los años cincuenta. Sus libros Can Our Cities Survive? , The Heart of the City y la revista del GATEPAC AC Documentos de Actividad Contemporánea tienen improntas claras en la revista peruana que atraviesan tres de los periodos propuestos. Durante la década de los cuarenta cuando Sert junto a Wiener fueron socios en Town Plannning Associates y tuvieron contacto directo con el director de la revista así como con los principales colaboradores, y durante la década posterior. A la luz de las evidencias analizadas, la figura de José Luis Sert emerge como la del arquitecto más influyente para la revista El Arquitecto Peruano a lo largo de todo su recorrido. ABSTRACT The thesis focuses on the analysis of 356 issues of the magazine El Arquitecto Peruano published between 1937 and 1977. The magazine was founded in august 1937 by Fernando Belaunde Terry, graduated from the University of Texas at Austin in 1935 who leaded it 25 years until March 1963. Since April 1963 was leaded by Miguel Cruchaga Belaunde. During this last stage the magazine ceases to be published on regular times, being published intermittently, unreleased several years, and finally disappear in 1977. El Arquitecto Peruano is the most important magazine of architecture of the twentieth century in Peru. The research located the magazine in the national context where was developed further by linking the various events of architecture and urbanism of the international scene occurred during the three decades of study. The research begins to establish a sequence of periods. This identification is based on a fixed structure existing in the journal formed by the permanent sections. A gradual insertion of temporary sections was complementing and detailing new themes and contents generating variants of the fixed structure over time. As a result of this process we recognize five periods linked to a series of central themes developed under the lead of Fernando Belaunde: Period 1 (September 1937 to March 1942): The Small House. Period 2 (April 1942 to May 1944). Modern urbanism. Period 3 (June 1944 to December 1949). Housing. Period 4 (January-February 1950 January-February 1956). Projects and Buildings. Period 5 (March-April 1956 January-February-March 1963). Territory. The final years under the direction of Miguel Cruchaga make the last Period. In the thirties, during the first period, is analyzed the role that a group of European and American magazines in architecture had in formal construction and thematic of the magazine. In the beginning there are influences of The Architectural Forum, The American Architect, Architecture, California Arts and Architecture and Architectural Digest. And along with these, the german magazine Moderne Bauformen and Innen Dekoration. Following World War II, the references to german magazines disappear and US relations are intensified by the position of Peru in the area of US influence. The magazines was not the only ways of influence, during the forties there was an open framework with Latin America that included cooperation trips of american architects on the south of the continent. As part of these links, in 1945 Paul Lester Wiener of Town Planning Associates and Richard Neutra, -both members of CIAM and the second President of the CIAM USAassisted the most important initiative promoted by the peruvian magazine, a popular housing project for workers and employees called El Plan Peruano. The magazine always has a strong attitude of change of the reality in the peruvian scene. To model the new version of reality created a series of media campaigns. In the biggest it used the ideas of modern urbanism that circulated during the war born in the CIAM of twenties and thirties. El Arquitecto Peruano take advantage of the situation of the early postwar years to direct their initiatives, modeled his proposal with the idea of Neighborhood Unit, making project and finally building the Unidad Vecinal N° 3, the larger scale project linked with the magazine. This favorable outlook for the ideas expressed by the publication joins the fact that its Director is elected deputy for Lima and is very close member to the current government who gave legal instruments and management to crystallize projects from 1945 to 1948. During this period of far-reaching proposals promoted by Fernando Belaunde and diffused by the magazine, as El Plan Peruano itself, the Centros Climaticos de Invierno, the Plan Piloto for Lima and the Concusos de Vivienda Popular. There is an earlier work on the magazine, restricted to the field of urbanism in 1992 by historian Antonio Zapata, entitled El Joven Belaunde: Historia de la revista El Arquitecto Peruano where the weight of the magazine leans Social Housing and notes Walter Gropius as the most influential architect in the publication. This thesis suggests that El Plan Peruano is the end of the iceberg, but these related projects to the magazine, form an inseparable whole and that the whole package has a direct influence of projects, ideas and editorial work of José Luis Sert developed from late twenties to the fifties. His book Can Our Cities Survive? , The Heart of the City and the magazine of GATEPAC AC Documentos de Actividad Contemporanea have clear signs in the peruvian magazine cross three of the proposed periods. During the forties when Sert and Wiener were partners in Town Plannning Associates and had direct contact with the director of the magazine as well as with key colaborators, and during the following decade. In light of the evidence examined, the shape of José Luis Sert emerges as the most influential architect to the peruvian magazine along its entire route.

A pre-Columbian Y chromosome-specific transition and its implications for human evolutionary history.

A polymorphic C-->T transition located on the human Y chromosome was found by the systematic comparative sequencing of Y-specific sequence-tagged sites by denaturing high-performance liquid chromatography. The results of genotyping representative global indigenous populations indicate that the locus is polymorphic exclusively within the Western Hemisphere. The pre-Columbian T allele occurs at > 90% frequency within the native South and Central American populations examined, while its occurrence in North America is approximately 50%. Concomitant genotyping at the polymorphic tetranucleotide microsatellite DYS19 locus revealed that the C-->T mutation displayed significant linkage disequilibrium with the 186-bp allele. The data suggest a single origin of linguistically diverse native Americans with subsequent haplotype differentiation within radiating indigenous populations as well as post-Columbian European and African gene flow. The mutation may have originated either in North America at a very early time during the expansion or before it, in the ancestral population(s) from which all Americans may have originated. The analysis of linkage of the DYS199 and the DYS19 tetranucleotide loci suggests that the C-->T mutation may have occurred around 30,000 years ago. We estimate the nucleotide diversity over 4.2 kb of the nonrecombining portion of the Y chromosome to be 0.00014. compared to autosomes, the majority of variation is due to the smaller effective population size of the Y chromosome rather than selective sweeps. There begins to emerge a pattern of pronounced geographical localization of Y-specific nucleotide substitution polymorphisms.

Stability and sensitivity analysis of Be-CoDiS, an epidemiological model to predict the spread of human diseases between countries. Validation with data from the 2014-16 West African Ebola Virus Disease epidemic.

Ebola virus disease is a lethal human and primate disease that requires a particular attention from the international health authorities due to important recent outbreaks in some Western African countries and isolated cases in European and North-America continents. Regarding the emergency of this situation, various decision tools, such as mathematical models, were developed to assist the authorities to focus their efforts in important factors to eradicate Ebola. In a previous work, we have proposed an original deterministic spatial-temporal model, called Be-CoDiS (Between-Countries Disease Spread), to study the evolution of human diseases within and between countries by taking into consideration the movement of people between geographical areas. This model was validated by considering numerical experiments regarding the 2014-16 West African Ebola Virus Disease epidemic. In this article, we propose to perform a stability analysis of Be-CoDiS. Our first objective is to study the equilibrium states of simplified versions of this model, limited to the cases of one an two countries, and to determine their basic reproduction ratios. Then, in order to give some recommendations for the allocation of resources used to control the disease, we perform a sensitivity analysis of those basic reproduction ratios regarding the model parameters. Finally, we validate the obtained results by considering numerical experiments based on data from the 2014-16 West African Ebola Virus Disease epidemic.

Model, Metamodel and Topology

This reply to Gash’s (Found Sci 2013) commentary on Nescolarde-Selva and Usó-Doménech (Found Sci 2013) answers the three questions raised and at the same time opens up new questions.

Why EU promotion is at odds with successful crisis management: public relations, news coverage, and the Aceh Monitoring Mission. EU Centre in Singapore Working Paper No. 10, September 2012

The EU’s Common Foreign and Security Policy (CFSP) and its accompanying Common Security and Defence Policy (CSDP) missions can be tools used to increase the international profile of the European Union. Nevertheless, CSDP missions garner little news coverage. This article argues that the very nature of the missions themselves makes them poor vehicles for EU promotion for political, institutional, and logistical reasons. By definition, they are conducted in the middle of crises, making news coverage politically sensitive. The very act of reporting could undermine the mission. Institutionally, all CSDP missions are intergovernmental, making press statements slow, overly bureaucratic, and of little interest to journalists. Logistically, the missions are often located in remote, undeveloped parts of the world, making it difficult and expensive for European and international journalists to cover. Moreover, these regions in crisis seldom have a thriving, local free press. Using the Aceh Monitoring Mission (AMM) as a case study, the author concludes that although a mission may do good, CSDP missions cannot fulfil the political function of raising the profile of the EU.

Brazil and the EU in the global economy. CEPS Working Document No. 371, February 2013

The structure of the world economy has been changing quickly during the last decade. The emerging global economy is much more fragmented than in the past and characterised by different global actors, each one with specific features and roles. In this setting, both Brazil and the European Union play role. This paper, without pretending to provide a full analysis of the European and Brazilian economies, offers a description of their main international economic features to understand their current and future role in the global order.

The New Financial Regulatory Paradigm: A transatlantic perspective. CEPS Policy Brief No. 287, 21 March 2013

This CEPS Policy Brief reviews key aspects of the new financial paradigm in a transatlantic perspective, focusing on the general approach in EU and US legislation in response to the financial crisis and the G-20 commitments and specifically as regards the extraterritorial implications. Following discussion of the institutional setting, conclusions are offered on what these changes mean in the context of the recently proposed Transatlantic Trade and Investment Partnership. In comparing the EU and the US efforts in re-engineering their regulatory regimes in response to the financial crisis, the paper finds, with the notable exception of the banking union, serious grounds for concern that the outcome may be an even more fragmented European financial market, access to which for third-country institutions is highly problematic.