Autonomous classification models in ubiquitous environments

Stream-mining approach is defined as a set of cutting-edge techniques designed to process streams of data in real time, in order to extract knowledge. In the particular case of classification, stream-mining has to adapt its behaviour to the volatile underlying data distributions, what has been called concept drift. Moreover, it is important to note that concept drift may lead to situations where predictive models become invalid and have therefore to be updated to represent the actual concepts that data poses. In this context, there is a specific type of concept drift, known as recurrent concept drift, where the concepts represented by data have already appeared in the past. In those cases the learning process could be saved or at least minimized by applying a previously trained model. This could be extremely useful in ubiquitous environments that are characterized by the existence of resource constrained devices. To deal with the aforementioned scenario, meta-models can be used in the process of enhancing the drift detection mechanisms used by data stream algorithms, by representing and predicting when the change will occur. There are some real-world situations where a concept reappears, as in the case of intrusion detection systems (IDS), where the same incidents or an adaptation of them usually reappear over time. In these environments the early prediction of drift by means of a better knowledge of past models can help to anticipate to the change, thus improving efficiency of the model regarding the training instances needed. By means of using meta-models as a recurrent drift detection mechanism, the ability to share concepts representations among different data mining processes is open. That kind of exchanges could improve the accuracy of the resultant local model as such model may benefit from patterns similar to the local concept that were observed in other scenarios, but not yet locally. This would also improve the efficiency of training instances used during the classification process, as long as the exchange of models would aid in the application of already trained recurrent models, that have been previously seen by any of the collaborative devices. Which it is to say that the scope of recurrence detection and representation is broaden. In fact the detection, representation and exchange of concept drift patterns would be extremely useful for the law enforcement activities fighting against cyber crime. Being the information exchange one of the main pillars of cooperation, national units would benefit from the experience and knowledge gained by third parties. Moreover, in the specific scope of critical infrastructures protection it is crucial to count with information exchange mechanisms, both from a strategical and technical scope. The exchange of concept drift detection schemes in cyber security environments would aid in the process of preventing, detecting and effectively responding to threads in cyber space. Furthermore, as a complement of meta-models, a mechanism to assess the similarity between classification models is also needed when dealing with recurrent concepts. In this context, when reusing a previously trained model a rough comparison between concepts is usually made, applying boolean logic. The introduction of fuzzy logic comparisons between models could lead to a better efficient reuse of previously seen concepts, by applying not just equal models, but also similar ones. This work faces the aforementioned open issues by means of: the MMPRec system, that integrates a meta-model mechanism and a fuzzy similarity function; a collaborative environment to share meta-models between different devices; a recurrent drift generator that allows to test the usefulness of recurrent drift systems, as it is the case of MMPRec. Moreover, this thesis presents an experimental validation of the proposed contributions using synthetic and real datasets.

Effects of a bifenthrin-treated net on the natural enemies Aphidius colemani (Haliday) and Adalia bipunctata L. in a cucumber crop in Central Spain. Semi-field experiments

Pest management practices that rely on pesticides are growing increasingly less effective and environmentally inappropriate in many cases and the search of alternatives is under focus nowadays. Exclusion of pests from the crop by means of pesticide-treated screens can be an eco-friendly method to protect crops, especially if pests are vectors of important diseases. The mesh size of nets is crucial to determine if insects can eventually cross the barrier or exclude them because there is a great variation in insect size depending on the species. Long-lasting insecticide-treated (LLITN) nets, factory pre-treated, have been used since years to fight against mosquitoes vector of malaria and are able to retain their biological efficacy under field for 3 years. In agriculture, treated nets with different insecticides have shown efficacy in controlling some insects and mites, so they seem to be a good tool in helping to solve some pest problems. However, treated nets must be carefully evaluated because can diminish air flow, increase temperature and humidity and decrease light transmission, which may affect plant growth, pests and natural enemies. As biological control is considered a key factor in IPM nowadays, the potential negative effects of treated nets on natural enemies need to be studied carefully. In this work, the effects of a bifentrhin-treated net (3 g/Kg) (supplied by the company Intelligent Insect Control, IIC) on natural enemies of aphids were tested on a cucumber crop in Central Spain in autumn 2011. The crop was sown in 8x6.5 m tunnels divided in 2 sealed compartments with control or treated nets, which were simple yellow netting with 25 mesh (10 x 10 threads/cm2; 1 x 1 mm hole size). Pieces of 2 m high of the treated-net were placed along the lateral sides of one of the two tunnel compartments in each of the 3 available tunnels (replicates); the rest was covered by a commercial untreated net of a similar mesh. The pest, Aphis gossypii Glover (Aphidae), the parasitoid Aphidius colemani (Haliday) (Braconidae) and the predator Adalia bipunctata L. (Coccinellidae) were artificially introduced in the crop. Weekly sampling was done determining the presence or absence of the pest and the natural enemies (NE) in the 42 plants/compartment as well as the number of insects in 11 marked plants. Environmental conditions (temperature, relative humidity, UV and PAR radiation) were recorded. Results show that when aphids were artificially released inside the tunnels, neither its number/plant nor their distribution was affected by the treated net. A lack of negative effect of the insecticide-treated net on natural enemies was also observed. Adalia bipunctata did not establish in the crop and only a short term control of aphids was observed one week after release. On the other hand, A. colemani did establish in the crop and a more long-term effect on the numbers of aphids/plant was detected irrespective of the type of net. KEY WORDS: bifenthrin-treated net, Adalia bipunctata, Aphidius colemani, Aphis gossypii, semi-field

Juan Navarro Baldeweg : el dibujo de la mano como herramienta en el proceso creativo

Esta investigación es una incursión en el tránsito de Juan Navarro desde sus “habitaciones y horizontes”, las manifestaciones espontáneas de la mano y el proyectar, a la obra que nos devuelve a la experiencia física y corporal del mundo. Juan Navarro debe a sus manos gran parte de sus inquietudes y capacidades. Sus manos están presentes en su obra como materia –piezas de manos-, como herramienta -el dibujo por la mano- y como desencadenante en los procesos creativos de su obra de arquitectura. Las distintas obras remiten a una preocupación común: la de visualizar el espacio a través de un imaginario personal. Sin embargo, el proceso creativo en cada disciplina se desarrolla teniendo en cuenta la especificidad del medio y la experiencia que provoca en el espectador. La obra, como concreción del proceso creativo, se explica por las continuidades y discontinuidades entre las herramientas, mecanismos y estrategias utilizadas en los distintos medios. La tesis se estructura en dos partes, en la primera se estudia cómo se producen los procesos creativos, sus mecanismos en los distintos medios plásticos y el dibujo como herramienta transversal. Se identifican los conceptos y temas que dan lugar a la obra profundizando en el papel de la mano como presencia orgánica, biológica y responsable de una forma de representación personal. La segunda parte se articula en dos capítulos que, a través del dibujo, muestran la arquitectura como modelo e identifican los mecanismos utilizados en su forma de proyectar y su relación con la obra en distintos proyectos. El texto se estructura como una secuencia de ideas articuladas alrededor de un universo gráfico que nos conduce por múltiples itinerarios desde los que atisbar los procesos creativos de Juan Navarro. Estos caminos son hilos con los que se teje una visión personal de la relación entre las herramientas y mecanismos utilizados por Juan Navarro y su obra. La manera cómo se produce el proceso creativo, los mecanismos y las herramientas que los ponen en marcha constituyen una forma de abordar la obra, que hasta la fecha, se ha tratado aisladamente sin una intención de construir un cuerpo estructurado de conocimiento. En la arquitectura Juan Navarro existe un vacío de conocimiento teórico y gráfico sobre el propio proceso y su forma de proyectar. Se ha persistido en la explicación de la obra, sus referencias, temas abordados, relaciones y trasvases sin ahondar en la especificidad del medio. Estos vacíos establecen la necesidad y justificación de esta tesis doctoral. La investigación comienza descifrando una obra que desde sus inicios trabaja con la dualidad de lo gestual y lo conceptual. Plantea una forma de ordenación del mundo, de la sensación sometida a la medida en la que finalmente la obra se recibe como signo que desencadena sentimientos y te devuelve al mundo. Propone la recuperación de los sentidos a través de una arquitectura como vivencia no reductible al espacio geométrico. Identifica los mecanismos y herramientas que se establecen en este proceso y termina concluyendo que el dibujo es la herramienta doblemente transversal porque atiende de forma desigual a las distintas disciplinas y a los dos extremos en que se presenta la actividad creatividad en el trabajo de Juan Navarro. Estos extremos se corresponden con un conocimiento corporal inconsciente y un trabajo constante guiado por la motivación, la predeterminación y la conceptualización. El dibujo por la mano es el espacio de encuentro entre lo que representa la mano y la posibilidad de expresión proyectual codificada. Se produce en un territorio que se extiende desde lo analógico subyacente –que se nutre de imágenes complejas- y el dominio simbólico construido. Abstract. This research is a foray into Juan Navarro’s transition from his "Rooms and Horizons", -spontaneous demonstrations of the hand-, to the project, -the work that brings us back to experiencing the physical world-. Juan Navarro owes his hands much of his capacities and inquisitiveness. His hands are present in his work as the subject –“Hand Pieces”-, as a tool -through hand-drawing - and as a trigger in the creative processes of his work of architecture. The various works refer to a common theme: the viewing space through a personal imagery. However, the creative process in each discipline develops taking into account the specificity of the medium and the experience that arouses in the observer. The work, as completion of the creative process, is explained by the continuities and discontinuities between the tools, mechanisms and strategies used in the different media. The thesis is structured in two parts, the first studies how the creative processes are iniciated, their mechanisms in the different plastic art media, as well as drawing as a transversal tool. In this section the investigation identifies the concepts and themes that give rise to the art work, exploring the role of the hand as the organic, biological presence responsible for a way of personal representation. The second part is divided into two chapters, which, via the drawing, show the architecture as a model and identify the mechanisms used in the his way of projecting form of the project and its the relationship of hand-drawing to with his work ilustrated with different projects. The text is structured as a sequence of ideas, articulated around a graphic universe that leads us by multiple paths, letting us glimpse into the creative processes of Juan Navarro. These paths are threads that weave a personal vision of the relationship between the tools and mechanisms used by Juan Navarro in his work. The way the creative process takes place, the mechanisms and tools that set it in action, constitutes a way of dealing with the work, that, hithergo, has been treated in isolation without an intention to build a structured body of knowledge. In Navarro Baldeweg’s architecture there is a vacuum of theoretical and graphic knowledge of the process itself and his way of projecting. So far, emphasis has been placed mainly on his work’s explanation, its references, the subjects covered, connections and transfers, without delving into the specificity of each medium. These academic gaps justify the need for this doctoral thesis. The investigation begins deciphering a work that, since its very beginning, deals with the duality of the gesture and the concept. It poses a way of managing the world and the sensations which are submitted until it finally detects the work as a sign that triggers feelings and returns the observer to the real world. It proposes the recovery of the senses through an architecture that is sensed as an experience and not merely reduced to geometric space. It identifies the mechanisms and tools that are set out in this process and concludes that drawing is a core tool working in two directions, because it caters unevenly to the various disciplines and to both ends of the creative activity presented in the work of Juan Navarro. These ends correspond with an unconscious physical knowledge and a continuous work guided by motivation, predetermination and conceptualization. Hand-drawing is the meeting space between what the hand represents, and the possibility of an encoded, projectual expression. Thus, hand-drawing takes place in a territory that covers the underlying analogue - which feeds on complex images - to the symbolic built domain.

Objetos tenaces : adaptive reuse en Meatpacking, 1970–1985

OBJETOS TENACES versa sobre la práctica del adaptive reuse (la “reutilización adaptativa”, la reconversión) explicado a través del fenómeno de ruptura, suspensión y reconfiguración de vínculos que el objeto arquitectónico tiene con respecto a su medio económico, sociocultural, normativo y de utilitas. Se trata de un fenómeno en tres fases, muy próximo al mecanismo empleado por el readymade y por el display, que en arquitectura parte de la crisis que supone un cambio de circunstancias, un desarraigo del objeto respecto de su ámbito anterior. El mecanismo tiene vocación de intervención mínima, desde un posicionamiento actual que comprende el mundo construido como una realidad “ya hecha”, y donde las operaciones de proyecto son acciones de transformación que llevan de una situación de obsolescencia a otra de vigencia renovada, es decir, de una realidad completa a otra igualmente completa. Para ello, la investigación se sirve de tres ejemplos de un mismo entorno geográfico (el área en torno a Meatpacking, en el lado oeste del bajo Manhattan, Nueva York) y temporal (las últimas décadas del siglo XX, en las que los casos se solapan a pesar de tener desarrollos cronológicos diversos). Bell Telephone Laboratories, The West Side Improvement y The National Biscuit Company, reconvertidos a Westbeth, a The High Line y a Chelsea Market, construyen juntos el argumento por suma de conceptos, por adición de fenómenos, estudiando las cualidades y las circunstancias que hacen posible la continuidad de las estructuras, es decir, su supervivencia. El texto forma un corpus que proporciona algunas de las claves del objeto denominado como tenaz a través del análisis sincrónico del antes y el después de su puesta en crisis. A tal efecto, se exponen una serie de figuras razonadas entre las cuales figuran el lijado del barniz, los hilos compartidos, la máscara, la momificación y la vitrina, el puente sobre le desfiladero, el enfriamiento, o las reliquias, incrustaciones y adherencias, todas ellas encaminadas a explicar el proceso de renovación del artefacto como un cambio en el sentido, en el significado, y no tanto en lo material. Entre las consideraciones de la tesis está, por un lado, el carácter relativo del término tenacidad, concepto que define a los objetos que se encuentran y se reconocen en su idoneidad, que tienen capacidad de adaptación, y que precisan finalmente de grandes dosis de pragmatismo para su reconfiguración, siendo todas éstas condiciones necesarias pero sólo suficientes a posteriori. Por otro lado, el texto reflexiona acerca del intangible que comparten todos los objetos así llamados y que consiste en la condición, quizá formidable, de ser reconocibles por parte de los sucesivos intervinientes de su historia, convencidos de que su renovación supone una oportunidad; su desaparición, una pérdida. Finalmente, la investigación apunta hacia el concepto de anacronismo como justificación para los objetos que se demuestran adaptables a épocas sucesivas, y que encajan en el tiempo de forma compleja. ABSTRACT TENACIOUS OBJECTS deals with the practice of the adaptive reuse explained by means of the phenomenon of rupture, suspension and reconfiguration of links that the architectural object has vis-à-vis its economic, socio-cultural and regulatory environment, and its utilitas. It is a phenomenon structured in three stages, very close to the mechanism used by the readymade and by the display, which in architecture arise from the crisis that leads to a change in circumstances, an alienation of the object regarding its previous environment. The mechanism aims to the minimum intervention, from a current positioning which understands the world built as a reality “already made”, and where the operations of the project are transformative actions that take us from a situation of obsolescence to a situation of renewed validity, that is, from a complete reality to one just as complete. For this purpose, the research makes use of three examples in the same geographical area (the Meatpacking Discrict, in the Lower West Side of Manhattan, New York) and the same period (the last decades of the 20th century, in which the cases overlap in spite of their diverse chronological developments). Bell Telephone Laboratories, The West Side Improvement and The National Biscuit Company, reconverted into Westbeth, The High Line and Chelsea Market, make up, together, the argument as a sum of concepts, and addition of phenomena, studying the qualities and circumstances which make the continuity of the structures possible, that is, their survival. The text forms a corpus that provides some of the keys of the so-called tenacious object by means of the synchronic analysis of before and after its crisis. To this end, a series of reasoned figures is presented, including the sanding of varnish, the shared threads, the mask, the mummification and the display cabinet, the bridge over the gorge, cooling, or the relics, incrustations and adherences, all of them aimed at explaining the renovation process of the artifact as a change in the sense and the meaning, rather than the material. The considerations of this dissertation include, on the one hand, the relative nature of the term tenacity, a concept which defines the objects found and recognized in their suitability, that are capable of adapting and which finally require large doses of pragmatism for their reconfiguration, all these conditions being necessary but only sufficient a posteriori. On the other hand, the text reflects on the intangible shared among all the so-called objects, and which consists of the condition, perhaps extraordinary, of being recognized by the subsequent interveners of their history, convinced that their renovation represents an opportunity; their disappearance, a loss. Finally, the dissertation studies the concept of anachronism as a justification for the objects that prove to adapt to subsequent periods, and which fit in time in a complex manner.

Assembly of Lampbrush Chromosomes from Sperm Chromatin

We have examined the behavior of demembranated sperm heads when injected into the germinal vesicle (GV) of amphibian oocytes. Xenopus sperm heads injected into Xenopus GVs swelled immediately and within hours began to stain with an antibody against RNA polymerase II (Pol II). Over time each sperm head became a loose mass of chromosome-like threads, which by 24–48 h resolved into individually recognizable lampbrush chromosomes (LBCs). Although LBCs derived from sperm are unreplicated single chromatids, their morphology and immunofluorescent staining properties were strikingly similar to those of the endogenous lampbrush bivalents. They displayed typical transcriptionally active loops extending from an axis of condensed chromomeres, as well as locus-specific “landmarks.” Experiments with [3H]GTP and actinomycin D demonstrated that transcription was not necessary for the initial swelling of the sperm heads and acquisition of Pol II but was required for maintenance of the lampbrush loops. Splicing was not required at any stage during formation of sperm LBCs. When Xenopus sperm heads were injected into GVs of the newt Notophthalmus, the resulting sperm LBCs displayed very long loops with pronounced Pol II axes, like those of the endogenous newt LBCs; as expected, they stained with antibodies against newt-specific proteins. Other heterologous injections, including sperm heads of the frog Rana pipiens and the zebrafish Danio rerio in Xenopus GVs, confirm that LBCs can be derived from taxonomically distant organisms. The GV system should help identify both cis- and trans-acting factors needed to convert condensed chromatin into transcriptionally active LBCs. It may also be useful in producing cytologically analyzable chromosomes from organisms whose oocytes do not go through a typical lampbrush phase or cannot be manipulated by current techniques.

Rússia

Inclui notas explicativas e bibliográficas

Rearrangement of Actin Microfilaments in Plant Root Hairs Responding to Rhizobium etli Nodulation Signals1

The response of the actin cytoskeleton to nodulation (Nod) factors secreted by Rhizobium etli has been studied in living root hairs of bean (Phaseolus vulgaris) that were microinjected with fluorescein isothiocyanate-phalloidin. In untreated control cells or cells treated with the inactive chitin oligomer, the actin cytoskeleton was organized into long bundles that were oriented parallel to the long axis of the root hair and extended into the apical zone. Upon exposure to R. etli Nod factors, the filamentous actin became fragmented, as indicated by the appearance of prominent masses of diffuse fluorescence in the apical region of the root hair. These changes in the actin cytoskeleton were rapid, observed as soon as 5 to 10 min after application of the Nod factors. It was interesting that the filamentous actin partially recovered in the continued presence of the Nod factor: by 1 h, long bundles had reformed. However, these cells still contained a significant amount of diffuse fluorescence in the apical zone and in the nuclear area, presumably indicating the presence of short actin filaments. These results indicate that Nod factors alter the organization of actin microfilaments in root hair cells, and this could be a prelude for the formation of infection threads.

Reconfigurable computing for Monte Carlo simulations: results and prospects of the Janus project

We describe Janus, a massively parallel FPGA-based computer optimized for the simulation of spin glasses, theoretical models for the behavior of glassy materials. FPGAs (as compared to GPUs or many-core processors) provide a complementary approach to massively parallel computing. In particular, our model problem is formulated in terms of binary variables, and floating-point operations can be (almost) completely avoided. The FPGA architecture allows us to run many independent threads with almost no latencies in memory access, thus updating up to 1024 spins per cycle. We describe Janus in detail and we summarize the physics results obtained in four years of operation of this machine; we discuss two types of physics applications: long simulations on very large systems (which try to mimic and provide understanding about the experimental non equilibrium dynamics), and low-temperature equilibrium simulations using an artificial parallel tempering dynamics. The time scale of our non-equilibrium simulations spans eleven orders of magnitude (from picoseconds to a tenth of a second). On the other hand, our equilibrium simulations are unprecedented both because of the low temperatures reached and for the large systems that we have brought to equilibrium. A finite-time scaling ansatz emerges from the detailed comparison of the two sets of simulations. Janus has made it possible to perform spin glass simulations that would take several decades on more conventional architectures. The paper ends with an assessment of the potential of possible future versions of the Janus architecture, based on state-of-the-art technology.

Impacto no sistema imunológico da utilização prolongada de morfina para tratamento da dor

Introdução. Apesar das evidências dos efeitos imunomodulatórios da morfina, não há na literatura estudos que tenham comparado a interação entre citocinas, imunidade celular (linfócitos T, B e NK) e a administração prolongada de morfina administrada pelas vias oral ou intratecal em doentes com dor crônica neuropática não relacionada ao câncer. Foram avaliados de forma transversal e comparativa 50 doentes com diagnóstico de dor lombar crônica e com presença de radiculopatia (dor neuropática) previamente operados para tratar hérnia discal lombar (Síndrome Dolorosa Pós- Laminectomia), sendo 18 doentes tratados prolongadamente com infusão de morfina pela via intratecal com uso de sistema implantável no compartimento subaracnóideo (grupo intratecal); 17 doentes tratados prolongadamente com morfina pela via oral (n=17) e 15 doentes tratados com fármacos mas sem opióides (grupo sem opioide). Foram analisadas as concentração das citocinas IL-2, IL-4, IL-8, TNFalfa, IFNy, IL-5, GM-CSF, IL-6, IL-10 e IL-1beta no plasma e no líquido cefalorraquidiano; imunofenotipagem de linfócitos T, B e células NK e avaliados os Índice de Escalonamento de Opióide (em percentagem de opióide utilizada e em mg), dose cumulativa de morfina (mg), duração do tratamento em meses, dose final de morfina utilizada (em mg), e equivalente de morfina por via oral (em mg). Resultados. Não houve diferença estatisticamente significativa entre o número de linfócitos T, B e NK nos doentes com morfina administrada pelas vias IT, VO e os não usuários de morfina. Houve correlação positiva entre as concentrações de linfócitos T CD4 e o Índice de Escalonamento de Opióide (em % e mg) nos doentes tratados com morfina por via intratecal. Houve correlação negativa entre as concentrações de células NK (CD56+) e o Índice de Escalonamento de Opióide (em % e mg) nos doentes tratados com morfina por via intratecal. Houve correlação positiva entre o número de células NK (CD56+) e a dose cumulativa de morfina (em mg) administrada pelas vias intratecal e oral. Houve correlação positiva entre as concentrações de linfócitos T CD8 e a duração do tratamento em meses nos doentes tratados com morfina pela via oral. As concentrações de IL-8 e IL-1beta foram maiores no LCR do que no plasma em todos os doentes da amostra analisada. As concentrações de IFNy no LCR foram maiores nos doentes que utilizavam morfina pela via oral e nos não usuários de morfina do que nos que a utilizavam pela via intratecal. As concentrações de plasmáticas de IL-5 foram maiores nos doentes utilizavam morfina pela via oral ou intratecal do que nos que não a utilizavam. A concentração de IL-5 no LCR correlacionou-se negativamente com a magnitude da dor de acordo com a EVA nos doentes tratados com morfina pelas via oral ou intratecal. Nos doentes tratados com morfina pelas via oral ou intratecal, a concentração de IL-2 no LCR correlacionou-se positivamente com a magnitude da dor de acordo com a EVA e negativamente com o Índice de Escalonamento de Opióide (em % e mg) e a dose cumulativa de morfina (em mg). As concentrações plasmáticas de GMCSF foram maiores nos doentes utilizavam morfina pela via oral ou intratecal do que nos não a utilizavam. A concentração de TNFalfa no LCR nos doentes tratados com morfina pela via intratecal correlacionou-se negativamente com o Índice de Escalonamento de Opióide (em % e mg), a dose cumulativa de morfina (em mg) e dose equivalente por via oral (em mg) de morfina. A concentração plasmática das citocinas IL-6 e IL-10 correlacionou-se negativamente com a duração do tratamento (em meses) nos doentes tratados com morfina administrada pela via oral. O Índice de Escalonamento de Opióide (em mg e %) correlacionou-se negativamente com as concentrações no LCR de IL-2 e TNFalfa nos doentes tratados com morfina administrada pela via intratecal. O Índice de Escalonamento de Opióide (em mg e %) correlacionou-se negativamente com as concentrações no LCR de IL-2 e IL-5 nos doentes tratados com morfina administrada pela via oral. Houve correlação negativa entre a intensidade da dor de acordo com a EVA e as concentrações de IL-5 e IL-2 no LCR nos doentes tratados com morfina administrada pelas vias oral e intratecal. Houve correlação negativa entre a intensidade da dor de acordo com a EVA e as concentrações plasmáticas de IL-4 nos doentes tratados com morfina administrada pela via intratecal. Houve correlação negativa entre a intensidade da dor de acordo com a EVA e as concentrações plasmáticas de IL-1beta nos doentes tratados com morfina administrada pela via intratecal. Conclusões: Os resultados sugerem associações entre citocinas e imunidade celular (células T , B e NK) e o tratamento prolongado com morfina administrada pela via oral ou intratecal. Estes resultados podem contribuir para a compreensão da imunomodulação da morfina administrada por diferentes vias em doentes com dor neuropática crônica não oncológica . São necessários mais estudos sobre os efeitos da morfina sobre o sistema imunológico

Condensados de Bose-Einstein em redes óticas: a transição superfluido-isolante de Mott em redes hexagonais e a classe de universalidade superfluido-vidro de Bose em 3D

Estudamos transições de fases quânticas em gases bosônicos ultrafrios aprisionados em redes óticas. A física desses sistemas é capturada por um modelo do tipo Bose-Hubbard que, no caso de um sistema sem desordem, em que os átomos têm interação de curto alcance e o tunelamento é apenas entre sítios primeiros vizinhos, prevê a transição de fases quântica superfluido-isolante de Mott (SF-MI) quando a profundidade do potencial da rede ótica é variado. Num primeiro estudo, verificamos como o diagrama de fases dessa transição muda quando passamos de uma rede quadrada para uma hexagonal. Num segundo, investigamos como a desordem modifica essa transição. No estudo com rede hexagonal, apresentamos o diagrama de fases da transição SF-MI e uma estimativa para o ponto crítico do primeiro lobo de Mott. Esses resultados foram obtidos usando o algoritmo de Monte Carlo quântico denominado Worm. Comparamos nossos resultados com os obtidos a partir de uma aproximação de campo médio e com os de um sistema com uma rede ótica quadrada. Ao introduzir desordem no sistema, uma nova fase emerge no diagrama de fases do estado fundamental intermediando a fase superfluida e a isolante de Mott. Essa nova fase é conhecida como vidro de Bose (BG) e a transição de fases quântica SF-BG que ocorre nesse sistema gerou muitas controvérsias desde seus primeiros estudos iniciados no fim dos anos 80. Apesar dos avanços em direção ao entendimento completo desta transição, a caracterização básica das suas propriedades críticas ainda é debatida. O que motivou nosso estudo, foi a publicação de resultados experimentais e numéricos em sistemas tridimensionais [Yu et al. Nature 489, 379 (2012), Yu et al. PRB 86, 134421 (2012)] que violam a lei de escala $\\phi= u z$, em que $\\phi$ é o expoente da temperatura crítica, $z$ é o expoente crítico dinâmico e $ u$ é o expoente do comprimento de correlação. Abordamos essa controvérsia numericamente fazendo uma análise de escalonamento finito usando o algoritmo Worm nas suas versões quântica e clássica. Nossos resultados demonstram que trabalhos anteriores sobre a dependência da temperatura de transição superfluido-líquido normal com o potencial químico (ou campo magnético, em sistemas de spin), $T_c \\propto (\\mu-\\mu_c)^\\phi$, estavam equivocados na interpretação de um comportamento transiente na aproximação da região crítica genuína. Quando os parâmetros do modelo são modificados de maneira a ampliar a região crítica quântica, simulações com ambos os modelos clássico e quântico revelam que a lei de escala $\\phi= u z$ [com $\\phi=2.7(2)$, $z=3$ e $ u = 0.88(5)$] é válida. Também estimamos o expoente crítico do parâmetro de ordem, encontrando $\\beta=1.5(2)$.

Metodologia para execução de aplicações paralelas baseadas no modelo BSP com tarefas heterogêneas.

A computação paralela permite uma série de vantagens para a execução de aplicações de grande porte, sendo que o uso efetivo dos recursos computacionais paralelos é um aspecto relevante da computação de alto desempenho. Este trabalho apresenta uma metodologia que provê a execução, de forma automatizada, de aplicações paralelas baseadas no modelo BSP com tarefas heterogêneas. É considerado no modelo adotado, que o tempo de computação de cada tarefa secundária não possui uma alta variância entre uma iteração e outra. A metodologia é denominada de ASE e é composta por três etapas: Aquisição (Acquisition), Escalonamento (Scheduling) e Execução (Execution). Na etapa de Aquisição, os tempos de processamento das tarefas são obtidos; na etapa de Escalonamento a metodologia busca encontrar a distribuição de tarefas que maximize a velocidade de execução da aplicação paralela, mas minimizando o uso de recursos, por meio de um algoritmo desenvolvido neste trabalho; e por fim a etapa de Execução executa a aplicação paralela com a distribuição definida na etapa anterior. Ferramentas que são aplicadas na metodologia foram implementadas. Um conjunto de testes aplicando a metodologia foi realizado e os resultados apresentados mostram que os objetivos da proposta foram alcançados.

Optimização de rotas na recolha de leite

O presente relatório tem por objectivo apresentar e descrever de forma detalhada o projecto “Optimização de rotas na recolha de leite”. Este projecto foi conduzido no âmbito do estágio curricular, realizado na parte não-lectiva do Mestrado em Sistemas de Informação de Gestão, do Instituto Superior de Contabilidade e Administração de Coimbra, tendo decorrido na empresa Lacticoop entre 03 de Outubro de 2011 e 27 de Julho de 2012. O projecto surge da necessidade da empresa optimizar as suas rotas de recolha de leite. Essa optimização pode ser subdividida em duas partes distintas: i) a recolha de dados, características e processos relativos à empresa e aos sistemas com que labora; ii) e o desenvolvimento do software necessário para a optimização de uma componente desses sistemas, associada ao processo de recolha de leite. O primeiro ponto envolve a recolha de informação sobre a política interna da empresa, a recolha de dados acerca dos veículos, rotas, consumos e condutores, assim como o levantamento de procedimentos e tecnologias utilizadas. O segundo ponto envolve a modelação do problema em estudo, o levantamento das necessidades de software para implementar o sistema de informação, a avaliação de soluções de software e desenvolvimento/adaptação da aplicação informática, assim como a implementação do software desenvolvido / adaptado e testes. Actualmente a empresa não dispõe de qualquer automatismo para a definição de rotas, sendo o processo de escalonamento de rotas feito manualmente. Este processo é bastante moroso e complexo, envolvendo a troca de informações entre o gestor e os condutores das viaturas. É um processo gradual, numa sequência de detecção de erros e correcção desses mesmos erros. Esta metodologia conduz a soluções bastante ineficientes, desde logo pela desactualização das soluções relativamente à efemeridade dos dados, especialmente ao nível de quantidades de recolha do produto. A razão da escolha de um sistema informático que permita optimizar as rotas prende-se essencialmente com a rapidez na obtenção de soluções e na capacidade de integração de dados actualizados. Este processo recorre a técnicas e modelos de optimização que envolvem o problema de Rotas de Veículos (Vehicle Routing Problem), sendo, em geral, um problema de difícil resolução em função do número de clientes envolvidos. Todavia, trata-se de um sistema que traz enormes benefícios no apoio ao processo de decisão por parte do gestor. Neste estágio pretendeu-se, como objectivo principal, desenvolver uma aplicação que permita optimizar as rotas dos veículos envolvidos no processo de recolha de leite. Os benefícios do sistema na diminuição de distâncias percorridas pelas viaturas de recolha e no aumento da eficiência do sistema de transportes, serão evidenciados no trabalho desenvolvido. A aplicação foi criada no software Eclipse (utilizando a linguagem Java). Na primeira fase do projecto estava previsto monitorizar as rotas e consumos dos veículos através da tecnologia de geo-posicionamento por satélite (GPS), de forma a atribuir comissões sobre a poupança de combustível aos condutores dos veículos. Não foi possível concluir esta fase devido à inexistência dessa tecnologia nas viaturas e pelo facto de a empresa ter retirado essa prioridade a esse investimento.

High-speed UDP Data Transmission with Multithreading and Automatic Resource Allocation

In this paper a utilization of the high data-rates channels by threading of sending and receiving is studied. As a communication technology evolves the higher speeds are used more and more in various applications. But generating traffic with Gbps data-rates also brings some complications. Especially if UDP protocol is used and it is necessary to avoid packet fragmentation, for example for high-speed reliable transport protocols based on UDP. For such situation the Ethernet network packet size has to correspond to standard 1500 bytes MTU[1], which is widely used in the Internet. System may not has enough capacity to send messages with necessary rate in a single-threaded mode. A possible solution is to use more threads. It can be efficient on widespread multicore systems. Also the fact that in real network non-constant data flow can be expected brings another object of study –- an automatic adaptation to the traffic which is changing during runtime. Cases investigated in this paper include adjusting number of threads to a given speed and keeping speed on a given rate when CPU gets heavily loaded by other processes while sending data.

Eliciting Euphoria Online: The Aesthetics of “ASMR” Video Culture

“Autonomous Sensory Meridian Response” (ASMR) is a term that has emerged online to describe a mysterious tingling sensation that some people experience in response to particular audiovisual and interpersonal “triggers.” Initially coalescing via discussion threads on health forums, ASMR culture quickly began using platforms like YouTube and Reddit to exchange trigger videos. This paper frames the emergence of ASMR video culture as an example of how bodies and algorithms are conspiring to bring into being new cultural forms that can seem literally inexplicable on first encounter. Treating videos as “inputs,” judged not as messages to be understood or interpreted but by their ability to elicit particular affective and somatic “outputs,” ASMR communities cultivate a quasi-cybernetic relationship with the moving image, using video as a vehicle for “feeling out” phenomena that seem to thwart linguistic articulation and rational comprehension.

Report of the National screw thread commission (revised 1928) (authorized by Congress, July 18, 1918, H. R. 10852) as approved June 22, 1928 ...

Mode of access: Internet.