Bonding shear strength in timber and GFRP glued with epoxy adhesives

The bonding quality of epoxy glued timber and glass fibre reinforced polymers (GFRP) was evaluated by means of compression loading shear test. Three timber species (Radiata pine, Laricio pine and Oak) and two kinds of GFRP (plates and rods made with polyester resin reinforced with mat and roving glass fibre) were glued and tested using three epoxy formulations. The increase in shear strength with age after the setting of epoxy formulations and the effect of surface roughness on timber and GRP gluing (the planing of the surface of timber and the previous sanding of GRP) were studied. It can be concluded that the mechanical properties of these products make them suitable for use in the reinforcement of deteriorated timber structures, and that a rough timber surface is preferable to a planed one, while the previous sanding of GRP surfaces is not advantageous.

Influence of the epoxy/amine stoichiometry on the thermomechanical properties of nanocomposites based on high Tg epoxy and organophilic clays.

In layered silicate-epoxy nanocomposites organic modification of the silicates makes them compatible with the epoxy which intercalates into the clay galleries. The effect of clay dispersion on epoxies of high Tg is not clear. Decreases of the epoxy Tg have been frequently reported. The presence of clay may cause stoichiometry imbalances that conduces to the formation of imperfect networks

Effects of dietary restriction combined with different exercise programs or physical activity recommendations on blood lipids in overweight adults

Background and aim: Many exercise studies, although generally showing the beneficial effects of supervised aerobic, resistance or combined exercise on blood lipids, have sometimes reached equivocal conclusions. The aim of this study is to evaluate the impact of different programs that combined exercise and dietary restriction on blood lipids versus a clinical practice intervention for weight loss, in overweight adults. Methods: For this study 66 subjects participated in a supervised 22 weeks training program, composed of three sessions per week and they were randomized in three groups: strength training (S; n = 19), endurance training (E; n = 25), a combination of E and S (SE; n = 22). Eighteen subjects served as physical activity group (PA) that followed a clinical intervention consisted of physical activity recommendations. All groups followed the same dietary treatment, and blood samples were obtained for lipids measurements, at the beginning and end of the study. Results: Lipid profile improved in all groups. No significant differences for baseline and post-training values were observed between groups. In general, SE and PA decreased low-density lipoprotein cholesterol (LDL-C) values (p menor que 0.01). S decreased triglyceride levels (p menor que 0.01) and E, SE, and PA decreased total cholesterol levels (p menor que 0.05, p menor que 0.01 and p menor que 0.01, respectively). Conclusions: These results suggest that an intervention program of supervised exercise combined with diet restriction did not achieved further improvements in blood lipid profile than diet restriction and physical activity recommendations, in overweight adults. (Clinical Trials gov number: NCT01116856).

Impact Behavior of Hybrid Glass/Carbon Epoxy Composites

The high velocity impact performance in hybrid woven carbon and S2 and E glass fabric laminates manufactured by resin transfer molding (RTM) was studied. Specimens with different thicknesses and glass-fiber content were tested against 5.5 mm spherical projectiles with impact velocities ranging from 300 to 700 m/s to obtain the ballistic limit. The resulting deformation and fracture micromechanisms were studied. Several impacts were performed on the same specimens to identify the multihit behavior of such laminates. The results of the fracture analysis, in conjunction with those of the impact tests, were used to describe the role played by glass-fiber hybridization on the fracture micromechanisms and on the overall laminate performance under high velocity impact.

Influence of different organoclays on the curing, morphology, and dynamic mechanical properties of an epoxy adhesive

The thermal, mechanical, and adhesive properties of nanoclay-modified adhesives were investigated. Two organically modified montmorillonites: Cloisite 93A (C93A) and Nanomer I.30E (I.30E) were used as reinforcement of an epoxy adhesive. C93A and I.30E are modified with tertiary and primary alkyl ammonium cations, respectively. The aim was to study the influence of the organoclays on the curing, and on the mechanical and adhesive properties of the nanocomposites. A specific goal was to compare their behavior with that of Cloisite30B/epoxy and Cloisite15A/ epoxy nanocomposites that we have previously studied. Both C30B and C15A are modified with quaternary alkyl ammonium cations. Differential scanning calorimetry results showed that the clays accelerate the curing reaction, an effect that is related to the chemical structure of the ammonium cations. The three Cloisite/nanocomposites showed intercalated clay structures,the interlayer distance was independent of the clay content. The I.30E/epoxy nanocomposites presented exfoliated structure due to the catalytic effect of the organic modifier. Clay-epoxy nanocompo-sites showed lower glass transition temperature (Tg) and higher values of storage modulus than neat epoxy thermoset, with no significant differences between exfoliated or intercalated nanocom-posites. The shear strength of aluminum joints using clay/epoxy adhesives was lower than with the neat epoxy adhesive. The wáter aging was less damaging for joints with I.30E/epoxy adhesive.

The role of lipids in mechanosensation

Acknowledgements: This work was supported by Wellcome Trust grants WT092552MA (J.H.N. and I.R.B.), Senior Investigator Award WT100209MA (J.H.N.), 093228 (T.K.S.) and 092970 (M.S.P.S.), and Biotechnology and Biological Sciences Research Council grants BB/I019855/1 (M.S.P.S.), BB/H017917/1 (J.H.N. and I.R.B.) and BB/J009784/1 (H.B.). We acknowledge the Diamond Light Source for beam time. I.R.B. is supported as a Leverhulme Emeritus Fellow. J.H.N. is supported as a Royal Society Wolfson Merit Award holder and as a 1000 Talent Scholar at Sichuan University. A.C.E.D. was supported by an Engineering and Physical Sciences Research Council Systems Biology Doctoral Training Centre student fellowship. We thank R. Phillips, A. Lee and S. Conway for helpful discussions.

Self-assembly of large, ordered lamellae from non-bilayer lipids and integral membrane proteins in vitro

In many biological membranes, the major lipids are “non-bilayer lipids,” which in purified form cannot be arranged in a lamellar structure. The structural and functional roles of these lipids are poorly understood. This work demonstrates that the in vitro association of the two main components of a membrane, the non-bilayer lipid monogalactosyldiacylglycerol (MGDG) and the chlorophyll-a/b light-harvesting antenna protein of photosystem II (LHCII) of pea thylakoids, leads to the formation of large, ordered lamellar structures: (i) thin-section electron microscopy and circular dichroism spectroscopy reveal that the addition of MGDG induces the transformation of isolated, disordered macroaggregates of LHCII into stacked lamellar aggregates with a long-range chiral order of the complexes; (ii) small-angle x-ray scattering discloses that LHCII perturbs the structure of the pure lipid and destroys the inverted hexagonal phase; and (iii) an analysis of electron micrographs of negatively stained 2D crystals indicates that in MGDG-LHCII the complexes are found in an ordered macroarray. It is proposed that, by limiting the space available for MGDG in the macroaggregate, LHCII inhibits formation of the inverted hexagonal phase of lipids; in thylakoids, a spatial limitation is likely to be imposed by the high concentration of membrane-associated proteins.

Guanidinium-cholesterol cationic lipids: efficient vectors for the transfection of eukaryotic cells.

Two cationic lipids, bis-guanidinium-spermidine-cholesterol (BGSC) and bis-guanidinium-trencholesterol (BGTC)-cholesterol derivatives bearing two guanidinium groups-have been synthesized and tested as artificial vectors for gene transfer. They combine the membrane compatible features of the cholesterol subunit and the favorable structural and high pKa features of the guanidinium functions for binding DNA via its phosphate groups. Reagent BGTC is very efficient for transfection into a variety of mammalian cell lines when used as a micellar solution. In addition, both BGTC and BGSC present also a high transfection activity when formulated as liposomes with the neutral phospholipid dioleoylphosphatidyl ethanolamine. These results reveal the usefulness of cholesterol derivatives bearing guanidinium groups for gene transfer.