Estimation of the solubility parameters of model plant surfaces and agrochemicals: a valuable tool for understanding plant surface interactions

Background Most aerial plant parts are covered with a hydrophobic lipid-rich cuticle, which is the interface between the plant organs and the surrounding environment. Plant surfaces may have a high degree of hydrophobicity because of the combined effects of surface chemistry and roughness. The physical and chemical complexity of the plant cuticle limits the development of models that explain its internal structure and interactions with surface-applied agrochemicals. In this article we introduce a thermodynamic method for estimating the solubilities of model plant surface constituents and relating them to the effects of agrochemicals. Results Following the van Krevelen and Hoftyzer method, we calculated the solubility parameters of three model plant species and eight compounds that differ in hydrophobicity and polarity. In addition, intact tissues were examined by scanning electron microscopy and the surface free energy, polarity, solubility parameter and work of adhesion of each were calculated from contact angle measurements of three liquids with different polarities. By comparing the affinities between plant surface constituents and agrochemicals derived from (a) theoretical calculations and (b) contact angle measurements we were able to distinguish the physical effect of surface roughness from the effect of the chemical nature of the epicuticular waxes. A solubility parameter model for plant surfaces is proposed on the basis of an increasing gradient from the cuticular surface towards the underlying cell wall. Conclusions The procedure enabled us to predict the interactions among agrochemicals, plant surfaces, and cuticular and cell wall components, and promises to be a useful tool for improving our understanding of biological surface interactions.

Estimation of the solubility parameters of model plant surfaces and agrochemicals: a valuable tool for understanding plant surface interactions

Background Most aerial plant parts are covered with a hydrophobic lipid-rich cuticle, which is the interface between the plant organs and the surrounding environment. Plant surfaces may have a high degree of hydrophobicity because of the combined effects of surface chemistry and roughness. The physical and chemical complexity of the plant cuticle limits the development of models that explain its internal structure and interactions with surface-applied agrochemicals. In this article we introduce a thermodynamic method for estimating the solubilities of model plant surface constituents and relating them to the effects of agrochemicals. Results Following the van Krevelen and Hoftyzer method, we calculated the solubility parameters of three model plant species and eight compounds that differ in hydrophobicity and polarity. In addition, intact tissues were examined by scanning electron microscopy and the surface free energy, polarity, solubility parameter and work of adhesion of each were calculated from contact angle measurements of three liquids with different polarities. By comparing the affinities between plant surface constituents and agrochemicals derived from (a) theoretical calculations and (b) contact angle measurements we were able to distinguish the physical effect of surface roughness from the effect of the chemical nature of the epicuticular waxes. A solubility parameter model for plant surfaces is proposed on the basis of an increasing gradient from the cuticular surface towards the underlying cell wall. Conclusions The procedure enabled us to predict the interactions among agrochemicals, plant surfaces, and cuticular and cell wall components, and promises to be a useful tool for improving our understanding of biological surface interactions.

Asphalt rubber mixtures with warm mix asphalt additives

En los últimos años, debido a la creciente preocupación por el calentamiento global y el cambio climático, uno de los retos más importantes a los que se enfrenta nuestra sociedad es el uso eficiente y económico de energía así como la necesidad correspondiente de reducir los gases de efecto invernadero (GEI). Las tecnologías de mezclas semicalientes se han convertido en un nuevo e importante tema de investigación en el campo de los materiales para pavimentos ya que ofrece una solución potencial para la reducción del consumo energético y las emisiones de GEI durante la producción y puesta en obra de las mezclas bituminosas. Por otro lado, los pavimentos que contienen polvo de caucho procedente de neumático fuera de uso, al hacer uso productos de desecho, ahorran energía y recursos naturales. Estos pavimentos ofrecen una resistencia mejorada a la formación de roderas, a la fatiga y a la fisuración térmica, reducen los costes de mantenimiento y el ruido del tráfico así como prolongan la vida útil del pavimento. Sin embargo, estas mezclas presentan un importante inconveniente: la temperatura de fabricación se debe aumentar en comparación con las mezclas asfálticas convencionales, ya que la incorporación de caucho aumenta la viscosidad del ligante y, por lo tanto, se producen mayores cantidades de emisiones de GEI. En la presente Tesis, la tecnología de mezclas semicalientes con aditivos orgánicos (Sasobit, Asphaltan A, Asphaltan B, Licomont) se incorporó a la de betunes de alta viscosidad modificados con caucho (15% y 20% de caucho) con la finalidad de dar una solución a los inconvenientes de mezclas con caucho gracias a la utilización de aditivos reductores de la viscosidad. Para este fin, se estudió si sería posible obtener una producción más sostenible de mezclas con betunes de alto contenido en caucho sin afectar significativamente su nivel de rendimiento mecánico. La metodología aplicada para evaluar y comparar las características de las mezclas consistió en la realización de una serie de ensayos de laboratorio para betunes y mezclas con caucho y con aditivos de mezclas semicalientes y de un análisis del ciclo de vida híbrido de la producción de mezclas semicalientes teniendo en cuenta la papel del aditivo en la cadena de suministro con el fin de cuantificar con precisión los beneficios de esta tecnología. Los resultados del estudio indicaron que la incorporación de los aditivos permite reducir la viscosidad de los ligantes y, en consecuencia, las temperaturas de producción y de compactación de las mezclas. Por otro lado, aunque la adición de caucho mejoró significativamente el comportamiento mecánico de los ligantes a baja temperatura reduciendo la susceptibilidad al fenómeno de fisuración térmica, la adición de las ceras aumentó ligeramente la rigidez. Los resultados del estudio reológico mostraron que la adición de porcentajes crecientes de caucho mejoraban la resistencia del pavimento con respecto a la resistencia a la deformación permanente a altas temperaturas y a la fisuración térmica a bajas temperaturas. Además, se observó que los aditivos mejoran la resistencia a roderas y la elasticidad del pavimento al aumentar el módulo complejo a altas temperaturas y al disminuir del ángulo de fase. Por otra parte, el estudio reológico confirmó que los aditivos estudiados aumentan ligeramente la rigidez a bajas temperaturas. Los ensayos de fluencia llevados a cabo con el reómetro demostraron una vez más la mejora en la elasticidad y en la resistencia a la deformación permanente dada por la adición de las ceras. El estudio de mezclas con caucho y aditivos de mezclas semicalientes llevado a cabo demostró que las temperaturas de producción/compactación se pueden disminuir, que las mezclas no experimentarían escurrimiento, que los aditivos no cambian significativamente la resistencia conservada y que cumplen la sensibilidad al agua exigida. Además, los aditivos aumentaron el módulo de rigidez en algunos casos y mejoraron significativamente la resistencia a la deformación permanente. Asimismo, a excepción de uno de los aditivos, las mezclas con ceras tenían la misma o mayor resistencia a la fatiga en comparación con la mezcla control. Los resultados del análisis de ciclo de vida híbrido mostraron que la tecnología de mezclas semicalientes es capaz de ahorrar significativamente energía y reducir las emisiones de GEI, hasta un 18% y 20% respectivamente, en comparación con las mezclas de control. Sin embargo, en algunos de los casos estudiados, debido a la presencia de la cera, la temperatura de fabricación debe reducirse en un promedio de 8 ºC antes de que los beneficios de la reducción de emisiones y el consumo de combustible puedan ser obtenidos. Los principales sectores contribuyentes a los impactos ambientales generados en la fabricación de mezclas semicalientes fueron el sector de los combustibles, el de la minería y el de la construcción. Due to growing concerns over global warming and climate change in recent years, one of the most important challenges facing our society is the efficient and economic use of energy, and with it, the corresponding need to reduce greenhouse gas (GHG) emissions. The Warm Mix Asphalt (WMA) technology has become an important new research topic in the field of pavement materials as it offers a potential solution for the reduction of energy consumption and GHG emissions during the production and placement of asphalt mixtures. On the other hand, pavements containing crumb-rubber modified (CRM) binders save energy and natural resources by making use of waste products. These pavements offer an improved resistance to rutting, fatigue and thermal cracking; reduce traffic noise and maintenance costs and prolong pavement life. These mixtures, however, present one major drawback: the manufacturing temperature is higher compared to conventional asphalt mixtures as the rubber lends greater viscosity to the binder and, therefore, larger amounts of GHG emissions are produced. In this dissertation the WMA technology with organic additives (Sasobit, Asphaltan A, Asphaltan B and Licomont) was applied to CRM binders (15% and 20% of rubber) in order to offer a solution to the drawbacks of asphalt rubber (AR) mixtures thanks to the use of fluidifying additives. For this purpose, this study sought to determine if a more sustainable production of AR mixtures could be obtained without significantly affecting their level of mechanical performance. The methodology applied in order to evaluate and compare the performance of the mixtures consisted of carrying out several laboratory tests for the CRM binders and AR mixtures with WMA additives (AR-WMA mixtures) and a hybrid input-output-based life cycle assessment (hLCA) of the production of WMA. The results of the study indicated that the incorporation of the organic additives were able to reduce the viscosity of the binders and, consequently, the production and compaction temperatures. On the other hand, although the addition of rubber significantly improved the mechanical behaviour of the binders at low temperatures reducing the susceptibility to thermal cracking phenomena, the addition of the waxes slightly increased the stiffness. Master curves showed that the addition of increasing percentages of rubber improved the resistance of the pavement regarding both resistance to permanent deformation at high temperatures and thermal cracking at low temperatures. In addition, the waxes improved the rutting resistance and the elasticity as they increased the complex modulus at high temperatures and decreased the phase angle. Moreover, master curves also attest that the WMA additives studied increase the stiffness at low temperatures. The creep tests carried out proved once again the improvement in the elasticity and in the resistance to permanent deformation given by the addition of the waxes. The AR-WMA mixtures studied have shown that the production/compaction temperatures can be decreased, that the mixtures would not experience binder drainage, that the additives did not significantly change the retained resistance and fulfilled the water sensitivity required. Furthermore, the additives increased the stiffness modulus in some cases and significantly improved the permanent deformation resistance. Except for one of the additives, the waxes had the same or higher fatigue resistance compared to the control mixture. The results of the hLCA demonstrated that the WMA technology is able to significantly save energy and reduce GHG emissions, up to 18% and 20%, respectively, compared to the control mixtures. However, in some of the case studies, due to the presence of wax, the manufacturing temperature at the asphalt plant must be reduced by an average of 8ºC before the benefits of reduced emissions and fuel usage can be obtained. The results regarding the overall impacts generated using a detailed production layer decomposition indicated that fuel, mining and construction sectors are the main contributors to the environmental impacts of manufacturing WMA mixtures.

Influencia del tratamiento "a fuego" en las características del estuco tradicional con cal = Influence of treatment "by fire" in the characteristics of traditional lime stucco

Esta investigación avanza en el intento de recuperar la técnica tradicional del estuco a fuego, paradigma de la decoración de espacios interiores hasta la mitad del s. XX por sus imitaciones marmóreas de gran calidad. Para ejecutarlos se utilizaban morteros de cal con áridos de mármol, pigmentos minerales y grasas; con estos materiales se preparaban y tendían las masas, se pintaban al fresco y se terminaban con el paso de una herramienta metálica caliente. Como sucede con otras técnicas, el paso del tiempo ha difuminado los conocimientos sobre la materia, haciendo muy difícil la conservación o restauración de los ejemplos en nuestro patrimonio. A partir de la escasa bibliografía existente se ha recuperado el proceso, sometiendo las muestras elaboradas a diferentes ensayos que han caracterizado el acabado final,tanto en sus características intrínsecas como en las que le son conferidas al proteger finalmente las muestras con una capa de cera, tal y como se realizaba tradicionalmente.---ABSTRACT---This research advances in the attempt to recover the traditional technique of stucco by fire; paradigm of indoor decoration until half of 20th century due to its high quality marbled imitations. On its implementation process, it was used lime mortars with marble aggregates, mineral pigments and greases. With these materials, masses were prepared and extended into the walls, they were painted in fresco and ended with the passage of a heated metal tool. As with any other technique, the time passing over has blurred the knowledge on the subject, making very difficult the preservation or restoration of examples in our heritage. Despite of the limited literature, the process has been recovered; subjecting the samples prepared at different trials that have characterized the finished, both in its merits and its conferred characteristics by finally protecting the samples with a layer of wax, as was done traditionally.

A SENHORA DA BERLINDA Representações sociais do cotidiano na religiosidade popular paraense

O culto a Nossa Senhora de Nazaré é uma devoção popular muito antiga em Belém do Pará, quase tão antiga quanto a cidade, pois esse culto se consolidou na mesma época em que se constituiu o município de Belém e o Estado do Pará. A população de devotos cresceu junto com a população dos habitantes da cidade. Tal fato propiciou que essa devoção popular se enraizasse profundamente na cultura paraense, penetrando até a auto-imagem do paraense católico, moldando a sua identidade cultural. A maior expressão desse culto é a grande romaria que os devotos realizam todos os anos no mês de outubro, que é conhecida como Círio de Nazaré e reúne uma média de dois milhões de pessoas, aproximadamente. O Círio de 2002 foi o recorte etnológico dessa pesquisa que disserta sobre as práticas cotidianas dos devotos no seu culto a Nossa Senhora de Nazaré, sobre como a religiosidade popular insere-se no dia-a-dia dos indivíduos, influenciando as representações sociais e recebendo a influência delas também, em um processo dialético.(AU)

A SENHORA DA BERLINDA Representações sociais do cotidiano na religiosidade popular paraense

O culto a Nossa Senhora de Nazaré é uma devoção popular muito antiga em Belém do Pará, quase tão antiga quanto a cidade, pois esse culto se consolidou na mesma época em que se constituiu o município de Belém e o Estado do Pará. A população de devotos cresceu junto com a população dos habitantes da cidade. Tal fato propiciou que essa devoção popular se enraizasse profundamente na cultura paraense, penetrando até a auto-imagem do paraense católico, moldando a sua identidade cultural. A maior expressão desse culto é a grande romaria que os devotos realizam todos os anos no mês de outubro, que é conhecida como Círio de Nazaré e reúne uma média de dois milhões de pessoas, aproximadamente. O Círio de 2002 foi o recorte etnológico dessa pesquisa que disserta sobre as práticas cotidianas dos devotos no seu culto a Nossa Senhora de Nazaré, sobre como a religiosidade popular insere-se no dia-a-dia dos indivíduos, influenciando as representações sociais e recebendo a influência delas também, em um processo dialético.(AU)

Latent varicella–zoster virus is located predominantly in neurons in human trigeminal ganglia

Varicella–zoster virus (VZV) is a human herpesvirus that causes varicella (chicken pox) as a primary infection and, after a variable period of latency in trigeminal and dorsal root ganglia, reactivates to cause herpes zoster (shingles). Both of these conditions may be followed by a variety of neurological complications, especially in immunocompromised individuals such as those with human immunodeficiency virus (HIV) infection. There have been a number of conflicting reports regarding the cellular location of latent VZV within human ganglia. To address this controversy we examined fixed wax-embedded trigeminal ganglia from 30 individuals obtained at autopsy, including 11 with HIV infection, 2 neonates, and 17 immunocompetent individuals, for the presence of latent VZV. Polymerase chain reaction (PCR), in situ hybridization, and PCR in situ amplification techniques with oligonucleotide probes and primer sequences to VZV genes 18, 21, 29, and 63 were used. VZV DNA in ganglia was detected in 15 individuals by using PCR alone, and in 12 individuals (6 normal non-HIV and 6 positive HIV individuals, but not neonatal ganglia) by using PCR in situ amplification. When in situ hybridization alone was used, 5 HIV-positive individuals and only 1 non-HIV individual showed VZV nucleic acid signals in ganglia. In all of the VZV-positive ganglia examined, VZV nucleic acid was detected in neuronal nuclei. Only occasional nonneuronal cells contained VZV DNA. We conclude from these studies that the neuron is the predominant site of latent VZV in human trigeminal ganglia.

Mapping leaf surface landscapes.

Leaf surfaces provide the ecologically relevant landscapes to those organisms that encounter or colonize the leaf surface. Leaf surface topography directly affects microhabitat availability for colonizing microbes, microhabitat quality and acceptability for insects, and the efficacy of agricultural spray applications. Prior detailed mechanistic studies that examined particular fungi-plant and pollinator-plant interactions have demonstrated the importance of plant surface topography or roughness in determining the outcome of the interactions. Until now, however, it has not been possible to measure accurately the topography--i.e., the three-dimensional structure--of such leaf surfaces or to record precise changes in patterns of leaf surface elevation over time. Using contact mode atomic force microscopy, we measured three-dimensional coordinates of upper leaf surfaces of Vaccinium macrocarpon (cranberry), a perennial plant, on leaves of two age classes. We then produced topographic maps of these leaf surfaces, which revealed striking differences between age classes of leaves: old leaves have much rougher surfaces than those of young leaves. Atomic force microscope measurements were analyzed by lag (1) autocorrelation estimates of leaf surfaces by age class. We suggest that the changes in topography result from removal of epicuticular lipids and that the changes in leaf surface topography influence phylloplane ecology. Visualizing and mapping leaf surfaces permit detailed investigations into leaf surface-mediated phenomena, improving our understanding of phylloplane interactions.

Encapsulação de colecalciferol (vitamina D3) por spray chilling

A indústria de alimentos está constantemente desenvolvendo produtos que fornecem, além de nutrientes, benefícios adicionais à saúde, tais como os enriquecidos com vitaminas. A vitamina D3 (colecalciferol) é sintetizada na pele durante a exposição da luz solar, controla a homeostase de cálcio e fósforo, metabolismo ósseo, pressão arterial e reabsorção renal de cálcio. O processo de microencapsulação vem sendo bastante aplicado em alimentos e um dos objetivos principais é o controle da liberação do agente ativo no momento e local desejado. A tecnologia de spray chilling é interessante para a microencapsulação de vitaminas lipossolúveis. O objetivo deste trabalho foi microencapsular vitamina D3, utilizando o método de spray chilling para a produção das micropartículas lipídicas sólidas (MLS). Para produção das MLS utilizou-se gordura vegetal com ponto de fusão em torno de 48 °C como carreador. Três tratamentos foram estabelecidos: sem aditivos (T1), com adição de 1% de cera de abelha (T2) e com 1% de lecitina de soja (T3). As micropartículas foram caracterizadas quanto à morfologia por microscopia eletrônica de varredura, tamanho médio por difração a laser, espectroscopia no infravermelho por transformada de Fourier (FTIR) e foi analisada a estabilidade da vitamina D3 durante o armazenamento a 10 e 25 °C, por meio de quantificações periódicas em cromatografia líquida de alta eficiência (CLAE). As micropartículas obtidas foram esféricas, semelhantes morfologicamente e com distribuição monocaudal de partículas. O tamanho médio das partículas variou em função dos seus ingredientes, sendo que as micropartículas produzidas apenas com vitamina e gordura foram menores em relação às demais (83,0% < 100 µm). A espectroscopia na região do infravermelho (FTIR) demonstrou que não ocorreu interação entre os ingredientes. A estabilidade da vitamina D3 encapsulada foi satisfatória ao longo de 65 dias com valores superiores a 87% para os três tratamentos e a temperatura apresentou influência na estabilidade. As MLS produzidas com cera apresentaram melhores resultados de estabilidade de vitamina D3 com valores de 90,18 ± 2,23 % após 65 dias de estocagem. Esses resultados são promissores e demostram a viabilidade da técnica de spray chilling na produção de MLS carregadas de vitamina D3, possibilitando uma futura aplicação em alimentos.

Bioactive compounds and physical and chemical characteristics of mini tomatoes: influence of postharvest treatments

Tomatoes are among the most cultivated and used vegetables in the world. They are very succeptible to post harvest losses due to high perishability, therefore the use of postharvest treatments may contribute to conservation of this fruit, however the treatments might affect significantly physico-chemical, sensory and nutritional characteristics of tomatoes. Given the perishability of tomato and the economic importance of small tomato fruits, the purpose of the present study was to determine the effect of gamma radiation, carnauba coating and 1-MCP treatments on tomato fruit quality during storage. The study may be divided into two parts. In the first, mini tomatoes cv. Sweet Grape were harvested at breaker stage, divided into 4 grous and treated with gamma radiation (0.6 kGy), carnauba coating (1 L 1000 kg-1) and 1-MCP (500 nL L-1) and then stored at 25±2°C for 30 days with a control group of tomatoes. In the seconnd part, tomatoes harvested at light-red stage were submitted to the same treatments and storage period. Every 6 days tomatoes were evaluated for color modifications, fruit firmness, souble and total pectin (only for light-red tomatoes), mass loss, titratable acidity (TA), soluble solids (SS), SS/TA ratio, carotenoids profile, formation of lycopene isomers, total phenolic compounds, ascorbic acid and antioxidant capacity. For tomatoes harvested at breaker stage and submitted to the treatments the results showed mass loss was delaying mainly by carnauba wax, and to a lesser extend by 1-MCP. Fruit firmness were better retained for 1-MCP treated fruits and carnauba treatment showed a transient effect in preserving fruit firmness. SS/TA of tomatoes treated with gamma radiation and carnauba presented no differences from control values, and were lower with the application of 1-MCP. Color was negatively affected by 1-MCP and earlier changed (6th day) when gamma radiation was applied. In relation to bioactive compounds of tomatoes harvest at breaker stage, results indicated gamma radiation and 1-MCP decreased the final content of lycopene and produced more (Z)-isomers of lycopene. Gamma radiation also induced a decreased in ?-carotene and an increased in phenolic compounds by the end of storage period. 1-MCP treatment promoted a slow down increase in ascorbic acid content during storage. Antioxidant capacity of the hydrophilic fraction was not dramatically affected by treatments and the lipophilic fraction was lower, especially for 1-MCP fruits. In addition, contents of ?-carotene, lycopene, (Z)-isomers of lycopene, ascorbic acid and antioxidant capacity increased during the period of storage while contents of lutein and phenolic compounds tended to decrease. Regarding tomatoes harvest at light-red stage, the most effective treatments for delaying fruit firmness and mass loss was carnauba and 1-MCP, while gamma radiation was the treatment with higher mass loss and the less fruit firmness, which could be associated with the higher solubilization of pectins promoted by radiation treatment. Color (L* and Hue) was mainly affected by 1-MCP treatment which delayed color development, however, by the end of storage, the values were not different from the other treatments. SS/TA ratio was lower for fruits treated with 1-MCP and TA was not so dramatically affected by treatments. Furthermore, mini tomatoes harvested at light-red stage, demonstrated irradiation induced changes in the final content of lycopene, increasing it, and formed less (13Z)-lycopene, while 1-MCP and carnauba coating slow down the increase in lycopene and slown down the decrease of ascorbic acid and phenolic compounds. Antioxidant capacity of lipophilic fraction was not affected by treatments and the hydrophilic fraction was lower for irradiated fruits only on day 0 as well as phenolic compounds. In the other days, no differences among treatments were observed for hydrophilic antioxidant capacity. Considering the results, the best combination of SS and TA and fruit preservation for mini tomatoes harvest at breaker stage was promoted by carnauba coating, which seems to be the treatment that causes fewer changes in bioactive compounds of breaker tomatoes. However, when mini tomatoes were harvested at light-red stage, SS/TA ratio and color were better and, to preserve the quality of these fruits, besides carnauba coating, 1-MCP also could be indicated