865 resultados para Environment Policy
Resumo:
La relación entre la estructura urbana y la movilidad ha sido estudiada desde hace más de 70 años. El entorno urbano incluye múltiples dimensiones como por ejemplo: la estructura urbana, los usos de suelo, la distribución de instalaciones diversas (comercios, escuelas y zonas de restauración, parking, etc.). Al realizar una revisión de la literatura existente en este contexto, se encuentran distintos análisis, metodologías, escalas geográficas y dimensiones, tanto de la movilidad como de la estructura urbana. En este sentido, se trata de una relación muy estudiada pero muy compleja, sobre la que no existe hasta el momento un consenso sobre qué dimensión del entorno urbano influye sobre qué dimensión de la movilidad, y cuál es la manera apropiada de representar esta relación. Con el propósito de contestar estas preguntas investigación, la presente tesis tiene los siguientes objetivos generales: (1) Contribuir al mejor entendimiento de la compleja relación estructura urbana y movilidad. y (2) Entender el rol de los atributos latentes en la relación entorno urbano y movilidad. El objetivo específico de la tesis es analizar la influencia del entorno urbano sobre dos dimensiones de la movilidad: número de viajes y tipo de tour. Vista la complejidad de la relación entorno urbano y movilidad, se pretende contribuir al mejor entendimiento de la relación a través de la utilización de 3 escalas geográficas de las variables y del análisis de la influencia de efectos inobservados en la movilidad. Para el análisis se utiliza una base de datos conformada por tres tipos de datos: (1) Una encuesta de movilidad realizada durante los años 2006 y 2007. Se obtuvo un total de 943 encuestas, en 3 barrios de Madrid: Chamberí, Pozuelo y Algete. (2) Información municipal del Instituto Nacional de Estadística: dicha información se encuentra enlazada con los orígenes y destinos de los viajes recogidos en la encuesta. Y (3) Información georeferenciada en Arc-GIS de los hogares participantes en la encuesta: la base de datos contiene información respecto a la estructura de las calles, localización de escuelas, parking, centros médicos y lugares de restauración. Se analizó la correlación entre e intra-grupos y se modelizaron 4 casos de atributos bajo la estructura ordinal logit. Posteriormente se evalúa la auto-selección a través de la estimación conjunta de las elecciones de tipo de barrio y número de viajes. La elección del tipo de barrio consta de 3 alternativas: CBD, Urban y Suburban, según la zona de residencia recogida en las encuestas. Mientras que la elección del número de viajes consta de 4 categorías ordinales: 0 viajes, 1-2 viajes, 3-4 viajes y 5 o más viajes. A partir de la mejor especificación del modelo ordinal logit. Se desarrolló un modelo joint mixed-ordinal conjunto. Los resultados indican que las variables exógenas requieren un análisis exhaustivo de correlaciones con el fin de evitar resultados sesgados. ha determinado que es importante medir los atributos del BE donde se realiza el viaje, pero también la información municipal es muy explicativa de la movilidad individual. Por tanto, la percepción de las zonas de destino a nivel municipal es considerada importante. En el contexto de la Auto-selección (self-selection) es importante modelizar conjuntamente las decisiones. La Auto-selección existe, puesto que los parámetros estimados conjuntamente son significativos. Sin embargo, sólo ciertos atributos del entorno urbano son igualmente importantes sobre la elección de la zona de residencia y frecuencia de viajes. Para analizar la Propensión al Viaje, se desarrolló un modelo híbrido, formado por: una variable latente, un indicador y un modelo de elección discreta. La variable latente se denomina “Propensión al Viaje”, cuyo indicador en ecuación de medida es el número de viajes; la elección discreta es el tipo de tour. El modelo de elección consiste en 5 alternativas, según la jerarquía de actividades establecida en la tesis: HOME, no realiza viajes durante el día de estudio, HWH tour cuya actividad principal es el trabajo o estudios, y no se realizan paradas intermedias; HWHs tour si el individuo reaiza paradas intermedias; HOH tour cuya actividad principal es distinta a trabajo y estudios, y no se realizan paradas intermedias; HOHs donde se realizan paradas intermedias. Para llegar a la mejor especificación del modelo, se realizó un trabajo importante considerando diferentes estructuras de modelos y tres tipos de estimaciones. De tal manera, se obtuvieron parámetros consistentes y eficientes. Los resultados muestran que la modelización de los tours, representa una ventaja sobre la modelización de los viajes, puesto que supera las limitaciones de espacio y tiempo, enlazando los viajes realizados por la misma persona en el día de estudio. La propensión al viaje (PT) existe y es específica para cada tipo de tour. Los parámetros estimados en el modelo híbrido resultaron significativos y distintos para cada alternativa de tipo de tour. Por último, en la tesis se verifica que los modelos híbridos representan una mejora sobre los modelos tradicionales de elección discreta, dando como resultado parámetros consistentes y más robustos. En cuanto a políticas de transporte, se ha demostrado que los atributos del entorno urbano son más importantes que los LOS (Level of Service) en la generación de tours multi-etapas. la presente tesis representa el primer análisis empírico de la relación entre los tipos de tours y la propensión al viaje. El concepto Propensity to Travel ha sido desarrollado exclusivamente para la tesis. Igualmente, el desarrollo de un modelo conjunto RC-Number of trips basado en tres escalas de medida representa innovación en cuanto a la comparación de las escalas geográficas, que no había sido hecha en la modelización de la self-selection. The relationship between built environment (BE) and travel behaviour (TB) has been studied in a number of cases, using several methods - aggregate and disaggregate approaches - and different focuses – trip frequency, automobile use, and vehicle miles travelled and so on. Definitely, travel is generated by the need to undertake activities and obtain services, and there is a general consensus that urban components affect TB. However researches are still needed to better understand which components of the travel behaviour are affected most and by which of the urban components. In order to fill the gap in the research, the present dissertation faced two main objectives: (1) To contribute to the better understanding of the relationship between travel demand and urban environment. And (2) To develop an econometric model for estimating travel demand with urban environment attributes. With this purpose, the present thesis faced an exhaustive research and computation of land-use variables in order to find the best representation of BE for modelling trip frequency. In particular two empirical analyses are carried out: 1. Estimation of three dimensions of travel demand using dimensions of urban environment. We compare different travel dimensions and geographical scales, and we measure self-selection contribution following the joint models. 2. Develop a hybrid model, integrated latent variable and discrete choice model. The implementation of hybrid models is new in the analysis of land-use and travel behaviour. BE and TB explicitly interact and allow richness information about a specific individual decision process For all empirical analysis is used a data-base from a survey conducted in 2006 and 2007 in Madrid. Spatial attributes describing neighbourhood environment are derived from different data sources: National Institute of Statistics-INE (Administrative: municipality and district) and GIS (circular units). INE provides raw data for such spatial units as: municipality and district. The construction of census units is trivial as the census bureau provides tables that readily define districts and municipalities. The construction of circular units requires us to determine the radius and associate the spatial information to our households. The first empirical part analyzes trip frequency by applying an ordered logit model. In this part is studied the effect of socio-economic, transport and land use characteristics on two travel dimensions: trip frequency and type of tour. In particular the land use is defined in terms of type of neighbourhoods and types of dwellers. Three neighbourhood representations are explored, and described three for constructing neighbourhood attributes. In particular administrative units are examined to represent neighbourhood and circular – unit representation. Ordered logit models are applied, while ordinal logit models are well-known, an intensive work for constructing a spatial attributes was carried out. On the other hand, the second empirical analysis consists of the development of an innovative econometric model that considers a latent variable called “propensity to travel”, and choice model is the choice of type of tour. The first two specifications of ordinal models help to estimate this latent variable. The latent variable is unobserved but the manifestation is called “indicators”, then the probability of choosing an alternative of tour is conditional to the probability of latent variable and type of tour. Since latent variable is unknown we fit the integral over its distribution. Four “sets of best variables” are specified, following the specification obtained from the correlation analysis. The results evidence that the relative importance of SE variables versus BE variables depends on how BE variables are measured. We found that each of these three spatial scales has its intangible qualities and drawbacks. Spatial scales play an important role on predicting travel demand due to the variability in measures at trip origin/destinations within the same administrative unit (municipality, district and so on). Larger units will produce less variation in data; but it does not affect certain variables, such as public transport supply, that are more significant at municipality level. By contrast, land-use measures are more efficient at district level. Self-selection in this context, is weak. Thus, the influence of BE attributes is true. The results of the hybrid model show that unobserved factors affect the choice of tour complexity. The latent variable used in this model is propensity to travel that is explained by socioeconomic aspects and neighbourhood attributes. The results show that neighbourhood attributes have indeed a significant impact on the choice of the type of tours either directly and through the propensity to travel. The propensity to travel has a different impact depending on the structure of each tour and increases the probability of choosing more complex tours, such as tours with many intermediate stops. The integration of choice and latent variable model shows that omitting important perception and attitudes leads to inconsistent estimates. The results also indicate that goodness of fit improves by adding the latent variable in both sequential and simultaneous estimation. There are significant differences in the sensitivity to the latent variable across alternatives. In general, as expected, the hybrid models show a major improvement into the goodness of fit of the model, compared to a classical discrete choice model that does not incorporate latent effects. The integrated model leads to a more detailed analysis of the behavioural process. Summarizing, the effect that built environment characteristics on trip frequency studied is deeply analyzed. In particular we tried to better understand how land use characteristics can be defined and measured and which of these measures do have really an impact on trip frequency. We also tried to test the superiority of HCM on this field. We can concluded that HCM shows a major improvement into the goodness of fit of the model, compared to classical discrete choice model that does not incorporate latent effects. And consequently, the application of HCM shows the importance of LV on the decision of tour complexity. People are more elastic to built environment attributes than level of services. Thus, policy implications must take place to develop more mixed areas, work-places in combination with commercial retails.
Resumo:
Water is a vital resource, but also a critical limiting factor for economic and social development in many parts of the world. The recent rapid growth in human population and water use for social and economic development is increasing the pressure on water resources and the environment, as well as leading to growing conflicts among competing water use sectors (agriculture, urban, tourism, industry) and regions (Gleick et al., 2009; World Bank, 2006). In Spain, as in many other arid and semi-arid regions affected by drought and wide climate variability, irrigated agriculture is responsible for most consumptive water use and plays an important role in sustaining rural livelihoods (Varela-Ortega, 2007). Historically, the evolution of irrigation has been based on publicly-funded irrigation development plans that promoted economic growth and improved the socio-economic conditions of rural farmers in agrarian Spain, but increased environmental damage and led to excessive and inefficient exploitation of water resources (Garrido and Llamas, 2010; Varela-Ortega et al., 2010). Currently, water policies in Spain focus on rehabilitating and improving the efficiency of irrigation systems, and are moving from technocratic towards integrated water management strategies driven by the European Union (EU) Water Framework Directive (WFD).
Resumo:
Spain pioneered policies related to disability and accessibility, especially in the physical environment. The first major piece of legislation was Act 13/1982 on the Social Integration of People with Disabilities. The law was published just a few years after the reinstitution of democracy in Spain in 1977 and the approval of the Spanish Constitution in 1978. Act 13/1982 is a general law that applies accessibility to social services and education, as well as to workplace and physical accessibility. This law targeted first and foremost the social integration of people with disabilities, and it was a significant success, especially in the field of employment, as it made it mandatory for private companies and public administrations to employ a certain percentage of persons with disabilities. This greatly increased the employability of people with disabilities, as highlighted in a document celebrating 30 years of Act 13/1982. Over the past 20 years, policy makers have also focused on accessibility to information and communication technologies (ICT), developing first the national computing accessibility standards and then specialized legislation. Initially, Spanish activities were mostly national but have now gained an international dimension. All these initiatives are strongly related to the discipline of human-computer interaction, as the key component of an accessible system is its user interface.
Resumo:
The road to the automation of the agricultural processes passes through the safe operation of the autonomous vehicles. This requirement is a fact in ground mobile units, but it still has not well defined for the aerial robots (UAVs) mainly because the normative and legislation are quite diffuse or even inexistent. Therefore, to define a common and global policy is the challenge to tackle. This characterization has to be addressed from the field experience. Accordingly, this paper presents the work done in this direction, based on the analysis of the most common sources of hazards when using UAV's for agricultural tasks. The work, based on the ISO 31000 normative, has been carried out by applying a three-step structure that integrates the identification, assessment and reduction procedures. The present paper exposes how this method has been applied to analyze previous accidents and malfunctions during UAV operations in order to obtain real failure causes. It has allowed highlighting common risks and hazardous sources and proposing specific guards and safety measures for the agricultural context.
Resumo:
We apply diffusion strategies to propose a cooperative reinforcement learning algorithm, in which agents in a network communicate with their neighbors to improve predictions about their environment. The algorithm is suitable to learn off-policy even in large state spaces. We provide a mean-square-error performance analysis under constant step-sizes. The gain of cooperation in the form of more stability and less bias and variance in the prediction error, is illustrated in the context of a classical model. We show that the improvement in performance is especially significant when the behavior policy of the agents is different from the target policy under evaluation.
Resumo:
Accessibility is an essential concept widely used to evaluate the impact of transport and land-use strategies in urban planning and policy making. Accessibility is typically evaluated by using separately a transport model or a land-use model. This paper embeds two accessibility indicators (i.e., potential and adaptive accessibility) in a land use and transport interaction (LUTI) model in order to assess transport policies implementation. The first aim is to define the adaptive accessibility, considering the competition factor at territorial level (e.g. workplaces and workers). The second aim is to identify the optimal implementation scenario of policy measures using potential and adaptive accessibility indicators. The analysis of the results in terms of social welfare and accessibility changes closes the paper. Two transport policy measures are applied in Madrid region: a cordon toll and increase bus frequency. They have been simulated through the MARS model (Metropolitan Activity Relocation Simulator, i.e. LUTI model). An optimisation procedure is performed by MARS for maximizing the value of the objective function in order to find the optimal policy implementation (first best). Both policy measures are evaluated in terms of accessibility. Results show that the introduction of the accessibility indicators (potential and adaptive) influence the optimal value of the toll price and bus frequency level, generating different results in terms of social welfare. Mapping the difference between potential and adaptive accessibility indicator shows that the main changes occur in areas where there is a strong competition among different land-use opportunities.
Resumo:
This paper analyses the effects of policy making for air pollution abatement in Spain between 2000 and 2020 under an integrated assessment approach with the AERIS model for number of pollutants (NOx/NO2, PM10/PM2.5, O3, SO2, NH3 and VOC). The analysis of the effects of air pollution focused on different aspects: compliance with the European limit values of Directive 2008/50/EC for NO2 and PM10 for the Spanish air quality management areas; the evaluation of impacts caused by the deposition of atmospheric sulphur and nitrogen on ecosystems; the exceedance of critical levels of NO2 and SO2 in forest areas; the analysis of O3-induced crop damage for grapes, maize, potato, rice, tobacco, tomato, watermelon and wheat; health impacts caused by human exposure to O3 and PM2.5; and costs on society due to crop losses (O3), disability-related absence of work staff and damage to buildings and public property due to soot-related soiling (PM2.5). In general, air quality policy making has delivered improvements in air quality levels throughout Spain and has mitigated the severity of the impacts on ecosystems, health and vegetation in 2020 as target year. The findings of this work constitute an appropriate diagnosis for identifying improvement potentials for further mitigation for policy makers and stakeholders in Spain.
Resumo:
Acknowledgements This work was supported by the UK Energy Research Centre Phase 2, under its Energy and Environment theme Grant Number NE/J005924/1 and NE/G007748/1. Open Access funded by Natural Environment Research Council
Resumo:
The production and use of carbon nanotubes (CNTs) can negatively impact human health and the environment through occupational, environmental, and product life-cycle exposures. Research is underway to evaluate the known, potential, and perceived hazards associated with CNTs. Recent research and policy analyses regarding CNTs were reviewed extensively. A facility engaged in research, development, and manufacture of CNTs was observed handling CNTs and associated individuals were informally interviewed. The combined investigation characterizes the current state of the art of our understanding and implementation of policy needed to address the impacts of CNTs to human health and the environment. A gap analysis is performed of regulations, policy, and CNT control methods; conclusions and recommendations are made from the results of this analysis.
Resumo:
While the topic of climate change is controversial, the world needs to take a precautionary approach to reduce carbon dioxide emissions. With growing populations and increasing energy demands, solutions to cleaner energy need to be developed and implemented. In order to successfully reduce carbon dioxide emissions, a global carbon pricing policy needs to be developed that includes all countries and allows each region to utilize the best clean energy technology options along with economic incentives that will be the most effective. The research conducted in this project validates the hypothesis that placing a monetary price on carbon will allow natural, technological, and financial resources to come together to implement a feasible energy solution that will reduce global carbon dioxide emissions.
Resumo:
Given the size of the financial markets on both sides of the Atlantic and the symmetry in the follow-up of the G-20 standards, Karel Lannoo argues in this Policy Brief that the Transatlantic Trade and Investment Partnership (TTIP) provides a good opportunity to put in place a more institutionalised framework. He finds that both blocs have reacted in similar ways to the financial crisis in strengthening their regulatory and supervisory frameworks and incorporating the G-20 recommendations into federal law. He also notes that consumer protection has been reinforced, certainly in the US, with the creation of the Consumer Financial Protection Bureau. And on the EU side, the Single Supervisory Mechanism (SSM) will radically change banking supervision. In his view, inclusion of financial services could also be an opportunity to strengthen prudential rules and consumer protection provisions on both sides. Rather than leading to a reduction of consumer protection, as had been feared in the post-crisis environment, it could lead to an examination, exchange and recognition of best practices in regulation and enforcement. Finally, he concludes that inclusion of financial services would make it part of the permanent regulatory dialogue that will be established as a result of a successful TTIP.
Resumo:
The European market for asset-backed securities (ABS) has all but closed for business since the start of the economic and financial crisis. ABS (see Box 1) were in fact the first financial assets hit at the onset of the crisis in 2008. The subprime mortgage meltdown caused a deterioration in the quality of collateral in the ABS market in the United States, which in turn dried up overall liquidity because ABS AAA notes were popular collateral for inter-bank lending. The lack of demand for these products, together with the Great Recession in 2009, had a considerable negative impact on the European ABS market. The post-crisis regulatory environment has further undermined the market. The practice of slicing and dicing of loans into ABS packages was blamed for starting and spreading the crisis through the global financial system. Regulation in the post-crisis context has thus been relatively unfavourable to these types of instruments, with heightened capital requirements now necessary for the issuance of new ABS products. And yet policymakers have recently underlined the need to revitalise the ABS market as a tool to improve credit market conditions in the euro area and to enhance transmission of monetary policy. In particular, the European Central Bank and the Bank of England have jointly emphasised that: “a market for prudently designed ABS has the potential to improve the efficiency of resource allocation in the economy and to allow for better risk sharing... by transforming relatively illiquid assets into more liquid securities. These can then be sold to investors thereby allowing originators to obtain funding and, potentially, transfer part of the underlying risk, while investors in such securities can diversify their portfolios... . This can lead to lower costs of capital, higher economic growth and a broader distribution of risk” (ECB and Bank of England, 2014a). In addition, consideration has started to be given to the extent to which ABS products could become the target of explicit monetary policy operations, a line of action proposed by Claeys et al (2014). The ECB has officially announced the start of preparatory work related to possible outright purchases of selected ABS1. In this paper we discuss how a revamped market for corporate loans securitised via ABS products, and how use of ABS as a monetary policy instrument, can indeed play a role in revitalising Europe’s credit market. However, before using this instrument a number of issues should be addressed: First, the European ABS market has significantly contracted since the crisis. Hence it needs to be revamped through appropriate regulation if securitisation is to play a role in improving the efficiency of resource allocation in the economy. Second, even assuming that this market can expand again, the European ABS market is heterogeneous: lending criteria are different in different countries and banking institutions and the rating methodologies to assess the quality of the borrowers have to take these differences into account. One further element of differentiation is default law, which is specific to national jurisdictions in the euro area. Therefore, the pool of loans will not only be different in terms of the macro risks related to each country of origination (which is a ‘positive’ idiosyncratic risk, because it enables a portfolio manager to differentiate), but also in terms of the normative side, in case of default. The latter introduces uncertainties and inefficiencies in the ABS market that could create arbitrage opportunities. It is also unclear to what extent a direct purchase of these securities by the ECB might have an impact on the credit market. This will depend on, for example, the type of securities targeted in terms of the underlying assets that would be considered as eligible for inclusion (such as loans to small and medium-sized companies, car loans, leases, residential and commercial mortgages). The timing of a possible move by the ECB is also an issue; immediate action would take place in the context of relatively limited market volumes, while if the ECB waits, it might have access to a larger market, provided steps are taken in the next few months to revamp the market. We start by discussing the first of these issues – the size of the EU ABS market. We estimate how much this market could be worth if some specific measures are implemented. We then discuss the different options available to the ECB should they decide to intervene in the EU ABS market. We include a preliminary list of regulatory steps that could be taken to homogenise asset-backed securities in the euro area. We conclude with our recommended course of action.
Resumo:
This Policy Brief offers an in-depth review of the Stability and Growth Pact (SGP) and looks at whether the margins of flexibility within existing rules are sufficient in the current climate of low growth, or whether there is a need to broaden them. The issue is especially relevant as the changing economic environment is raising fresh questions about whether the EU’s current common economic policies are able to manage dismal growth and low inflation. The fragile state of confidence in financial markets and the unresolved but inevitable questions of moral hazard linked to lax fiscal policies mean that no large-scale fiscal expansion to support the recovery of economic activity is feasible. The discussion may therefore only concern the scope within the SGP to accommodate an unexpected drop in economic activity and to provide room for the implementation of structural reforms. Here, we analyse the flexibility clauses of the Stability and Growth Pact under three headings; namely “exceptional circumstances”, “structural reforms and other relevant factors”, and the “investment clause”. Recommendation: Our main conclusion is that the SGP contains sufficient flexibility to accommodate an unexpected drop in economic activity and has the margins needed to finance structural reforms during the transition to the new regime. We therefore see no need to change the existing rules of the SGP. We believe that the ongoing debate about a fresh growth strategy for the eurozone and the European Union would greatly benefit from removing from the Council table ill-formulated and unnecessary demands for greater flexibility in the SGP.
Resumo:
Cities, more particularly ‘smart’ cities, could become a catalyst for economic and social development. For this to happen, Europe will need a new type of integrated infrastructure, a new urban governance and policy structure, as well as new finance and business models. Successful smart projects will eventually develop into new business models and companies. While the European Commission cannot mandate or regulate this top down, it has a role to play in nurturing new initiatives to allow Europe the possibility of developing its own Google and Apple.
Resumo:
During the 2008 financial crisis, the G20 was hastily elevated to ‘global economic steering committee’. In the early stages of the crisis, the G20 was an effective forum for crisis containment. As the crisis has eased, however, the G20 has lost both direction and momentum. Governments and policymakers have felt less need to act in unison and have rather refocused on their national agendas, as is their duty and primary function. However, effective global governance is needed permanently, not just in crisis times. It is desirable to have more representative and effective global governance that, among other things, is equipped to prevent crises rather than just react to them. In an environment of rapid change in global patterns of trade and wealth creation, a new revamped (but highly representative) grouping should be created within the G20, to provide leadership on key economic policy matters. Euro-area members should give up their individual seats in this G7+, allowing room for China and other large emerging economies. Without euro-area countries taking such a step, it would be impossible to reconcile effectiveness and representation in this new G7+, which would take charge of decision making on global economic imbalances, financial and monetary issues. All existing G20 countries, including individual euro-area countries, would however remain in the G20, which could potentially expand and would remain the prime forum for discussion on all remaining matters at global level.