" Studies on Laser induced Phatothermal Phenomena in Selected Organic Compounds and Fullerenes"

In the pre—laser era it was difficult to believe that the optical properties of a medium depend upon the intensity of the radiation incident on it. The basis for this conclusion is that the electric field strength associated with the conventional light sources used before the advent of lasers was much smaller than (103 V/cm) the field sttrengths of atomic or interatomic fields (2 107 —- 10” V/cm). The radiation with such low intensity is not able to affect atomic fields to the extent of changing optical parameters. The invention of laser in 1960 was a turning point. The high degree of coherence of the laser radiation provides high spatial concentration of optical power. With the availability of the femtosecond lasers it has become possible to get extremely high peak powers 2 1013 W/cmz). At such high fields, the relationship between electric ‘polarization P and the electric field strength E ceases to be linear and several nonlinear effects begin to occur. Nonlinear absorption, a branch of nonlinear optics, refers to the interaction between radiation and matter accompanied by absorption of more than one photon. Nonlinear absorption has acquired great importance after the invention of high power lasers. One of the objectives of the present work is to investigate the nonlinear absorption processes occurring in fullerene, selected organic solvents and laser dyes. Fullerenes and laser dyes were chosen because of their highly nonlinear behaviour. Fullerenes, the most beautiful among molecules, offer fascinating field of research owinglto their significant structural properties. As toluene, benzene and carbon disulphide are themost widely used solvents for fullerenes, it seems important to study the nonlinear properties of these liquids as well. Like fullerenes, laser dyes also possess highly delocalized 7r electrons which are responsible for their nonlinear absorption. Dye lasers were the fulfillment of an experimenter’s pipe dream - to have a laser that is easily tunable over a wide range of wavelengths. A better understandingof the photophysical properties of laser dyes can significantly enhance the development and technology of dye lasers. We studied the nonlinear absorption properties of two rhodamine dyes to have some insight into their nonlinear optical properties.

Raman spectra of KTP crystal in an in situ electric field

Raman spectra of the KTP single crystal are recorded in electric fields (dc and ac) applied along the polar axis c. Spectra with the laser beam focused near the cathode end, anode end and the centre of the crystal are recorded. The cathode end of the crystal develops a spot ‘grey track’ where the laser beam is focused after a lapse of 5 h from the application of a dc electric field of 38 V/cm. The spectra recorded at the cathode end after the application of field show variations in intensity of bands. A new band appears at 177 cm21. Changes in band intensities are explained on the basis of changes in polarizability of the crystal due to the movement of K1 ions along the polar axis. K1 ions accumulate at the cathode end, where the ‘Grey track’ formation occurs. The intensity enhancement observed for almost all bands in the ac field is attributed to the improvement of crystalline quality.

Lithography-free micro- and nanostructuring based on conventional plasma etching

In now-a-days semiconductor and MEMS technologies the photolithography is the working horse for fabrication of functional devices. The conventional way (so called Top-Down approach) of microstructuring starts with photolithography, followed by patterning the structures using etching, especially dry etching. The requirements for smaller and hence faster devices lead to decrease of the feature size to the range of several nanometers. However, the production of devices in this scale range needs photolithography equipment, which must overcome the diffraction limit. Therefore, new photolithography techniques have been recently developed, but they are rather expensive and restricted to plane surfaces. Recently a new route has been presented - so-called Bottom-Up approach - where from a single atom or a molecule it is possible to obtain functional devices. This creates new field - Nanotechnology - where one speaks about structures with dimensions 1 - 100 nm, and which has the possibility to replace the conventional photolithography concerning its integral part - the self-assembly. However, this technique requires additional and special equipment and therefore is not yet widely applicable. This work presents a general scheme for the fabrication of silicon and silicon dioxide structures with lateral dimensions of less than 100 nm that avoids high-resolution photolithography processes. For the self-aligned formation of extremely small openings in silicon dioxide layers at in depth sharpened surface structures, the angle dependent etching rate distribution of silicon dioxide against plasma etching with a fluorocarbon gas (CHF3) was exploited. Subsequent anisotropic plasma etching of the silicon substrate material through the perforated silicon dioxide masking layer results in high aspect ratio trenches of approximately the same lateral dimensions. The latter can be reduced and precisely adjusted between 0 and 200 nm by thermal oxidation of the silicon structures owing to the volume expansion of silicon during the oxidation. On the basis of this a technology for the fabrication of SNOM calibration standards is presented. Additionally so-formed trenches were used as a template for CVD deposition of diamond resulting in high aspect ratio diamond knife. A lithography-free method for production of periodic and nonperiodic surface structures using the angular dependence of the etching rate is also presented. It combines the self-assembly of masking particles with the conventional plasma etching techniques known from microelectromechanical system technology. The method is generally applicable to bulk as well as layered materials. In this work, layers of glass spheres of different diameters were assembled on the sample surface forming a mask against plasma etching. Silicon surface structures with periodicity of 500 nm and feature dimensions of 20 nm were produced in this way. Thermal oxidation of the so structured silicon substrate offers the capability to vary the fill factor of the periodic structure owing to the volume expansion during oxidation but also to define silicon dioxide surface structures by selective plasma etching. Similar structures can be simply obtained by structuring silicon dioxide layers on silicon. The method offers a simple route for bridging the Nano- and Microtechnology and moreover, an uncomplicated way for photonic crystal fabrication.

Farmers’ perspectives with regard to arable crop production and deagrarianisation: an analysis of Nkonkobe Municipality, South Africa

This exploratory study evaluated biophysical, cultural and socio-economic factors affecting crop production and land utilisation in the Nkonkobe Municipality, South Africa. The study sought to establish what farmers in the area perceive as serious threats to crop production, drivers for land abandonment, and how best current agricultural production could be intensified. The farmers’ perspectives were assessed through interviews using semi-structured and open-ended questionnaires. The results of the study revealed declining crop productivity and increase in land abandonment in the Municipality. The biophysical drivers of land abandonment were low and erratic rainfall and land degradation while the socio-economic drivers were labour shortages due to old age and youth movement to cities, lack of farming equipment and security concerns. The most abandoned crops were maize, sorghum and wheat. This trend was attributed to the labour intensiveness of cereal production and a shift in dietary preference to purchased rice. These findings should be factored in any programmes that seek to increase land utilisation and crop productivity in the Municipality.

Systematic study of the static electrical properties of the CO molecule: influence of the basis set size and correlation energy

The influence of the basis set size and the correlation energy in the static electrical properties of the CO molecule is assessed. In particular, we have studied both the nuclear relaxation and the vibrational contributions to the static molecular electrical properties, the vibrational Stark effect (VSE) and the vibrational intensity effect (VIE). From a mathematical point of view, when a static and uniform electric field is applied to a molecule, the energy of this system can be expressed in terms of a double power series with respect to the bond length and to the field strength. From the power series expansion of the potential energy, field-dependent expressions for the equilibrium geometry, for the potential energy and for the force constant are obtained. The nuclear relaxation and vibrational contributions to the molecular electrical properties are analyzed in terms of the derivatives of the electronic molecular properties. In general, the results presented show that accurate inclusion of the correlation energy and large basis sets are needed to calculate the molecular electrical properties and their derivatives with respect to either nuclear displacements or/and field strength. With respect to experimental data, the calculated power series coefficients are overestimated by the SCF, CISD, and QCISD methods. On the contrary, perturbation methods (MP2 and MP4) tend to underestimate them. In average and using the 6-311 + G(3df) basis set and for the CO molecule, the nuclear relaxation and the vibrational contributions to the molecular electrical properties amount to 11.7%, 3.3%, and 69.7% of the purely electronic μ, α, and β values, respectively

A comparison of energy use in conventional and integrated arable farming systems in the UK

The LINK Integrated Farming Systems (LINK-IFS) Project (1992-1997) was setup to compare conventional and integrated arable farming systems (IAFS), concentrating on practical feasibility and economic viability, but also taking into account the level of inputs used and environmental impact. As part of this, an examination into energy use within the two systems was also undertaken. This paper presents the results from that analysis. The data used is from the six sites within the LINK-IFS Project, spread through the arable production areas of England and from the one site in Scotland, covering the 5 years of the project. The comparison of the energy used is based on the equipment and inputs used to produce I kg of each crop within the conventional and integrated rotations, and thereby the overall energy used for each system. The results suggest that, in terms of total energy used, the integrated system appears to be the most efficient. However, in terms of energy efficiency, energy use per kilogram of output, the results are less conclusive. (C) 2003 Elsevier Science B.V. All rights reserved.

Carbon reduction in buildings (CaRB) - Understanding the social and technical factors that influence energy use in UK buildings

Attempts to reduce the energy consumed in UK homes have met with limited success. One reason for this is a lack of understanding of how people interact with domestic technology – heating systems, lights, electrical equipment and so forth. Attaining such an understanding is hampered by a chronic shortage of detailed energy use data matched to descriptions of the house, the occupants, the internal conditions and the installed services and appliances. Without such information it is impossible to produce transparent and valid models for understanding and predicting energy use. The Carbon Reduction in Buildings (CaRB) consortium of five UK universities plans to develop socio-technical models of energy use, underpinned by a flow of data from a longitudinal monitoring campaign involving several hundred UK homes. This paper outlines the models proposed, the preliminary monitoring work and the structure of the proposed longitudinal study.

Identifying barriers and opportunities for transitions towards more sustainable agriculture through system analysis: the case of Vereda La Hoya, Colombia

The paper presents the results of studies which investigated farmers’ reasoning and behaviour with regards to the mis‐use of personal protective equipment and pesticide among smallholders in Colombia. First, the research approach is described. In particular, the structured mental models approach and the integrative agent‐centred framework are presented. These approaches permit to understand the farmers’ reasoning and behaviour in a system perspective. Second, the results are summarized. The methods adopted allowed not only for identifying the factors, but also the social dynamics influencing farmers. Finally, suggestions for interventions are provided, which are not limited to a technical fix, but address the underlying social causes of the problem.

Sources and spread of thermophilic Campylobacter spp. during partial depopulation of broiler chicken flocks

The practice of partial depopulation or ‘thinning’, i.e. early removal of a proportion of birds from a commercial broiler flock, is a reported risk factor for Campylobacter colonization of residual birds because of the difficulty in maintaining biosecurity during the process. Therefore, the effect of this practice was studied in detail for 51 target flocks, each at a different growing farm belonging to one of seven major poultry companies throughout the United Kingdom. On 21 of these farms, the target flock was already colonized by Campylobacter and at slaughter all cecal samples examined were positive, with a mean of log10 8 cfu / g. A further 27 flocks became positive within 2 – 6 days of the start of thinning and had similarly high levels of cecal carriage at slaughter. Just prior to the thinning process, Campylobacter could be isolated frequently from the farm driveways, transport vehicles, equipment and personnel. Strains from seven such farms on which flocks became colonized after thinning were examined by PFGE typing. The study demonstrated an association between strains occurring at specific sampling sites and those isolated subsequently from the thinned flocks. There were also indications that particular strains had spread from one farm to another, when the farms were jointly company-owned and served by the same bird-catching teams and / or vehicles. The results highlighted the need for better hygiene control in relation to catching equipment and personnel, and more effective cleaning and disinfection of vehicles, and bird-transport crates.

The description of stencilling by Gilles Filleau des Billettes: transcription and translation

This article presents the description of stencilling by Gilles Filleau des Billettes. The description sets out a method for stencilling letters, words, and texts, and specifies equipment for doing the work; it forms the basis for a reconstruction of the equipment and method, which is presented in a parallel article in this volume of Typography papers (see E. Kindel, 'A reconstruction of stencilling based on the description by Gilles Filleau des Billettes', Typography papers, 9, pp. 28–65). The original French text, approximately 10,000 words in length, is here transcribed and accompanied by a parallel English translation. Introductory notes on the preparation of both texts are provided; images of stencil letters found among the papers of Sébastien Truchet, Des Billettes’s colleague, are shown in an appendix.

Progress report on longitudinal and cross-sectional study of carbon disclosure strategies: evidence from UK listed companies

Global warming has attracted attention from all over the world and led to the concern about carbon emission. Kyoto Protocol, as the first major international regulatory emission trading scheme, was introduced in 1997 and outlined the strategies for reducing carbon emission (Ratnatunga et al., 2011). As the increased interest in carbon reduction the Protocol came into force in 2005, currently there are already 191 nations ratifying the Protocol(UNFCCC, 2012). Under the cap-and-trade schemes, each company has its carbon emission target. When company’s carbon emission exceeds the target the company will either face fines or buy emission allowance from other companies. Thus unlike most of the other social and environmental issues carbon emission could trigger cost for companies in introducing low-emission equipment and systems and also emission allowance cost when they emit more than their targets. Despite the importance of carbon emission to companies, carbon emission reporting is still operating under unregulated environment and companies are only required to disclose when it is material either in value or in substances (Miller, 2005, Deegan and Rankin, 1997). Even though there is still an increase in the volume of carbon emission disclosures in company’s financial reports and stand-alone social and environmental reports to show their concern of the environment and also their social responsibility (Peters and Romi, 2009), the motivations behind corporate carbon emission disclosures and whether carbon disclosures have impact on corporate environmental reputation and financial performance have not yet to explore. The problems with carbon emission lie on both the financial side and non-financial side of corporate governance. On one hand corporate needs to spend money in reducing carbon emission or paying penalties when they emit more than allowed. On the other hand as the public are more interested in environmental issues than before carbon emission could also impact on the image of corporate regarding to its environmental performance. The importance of carbon emission issue are beginning to be recognized by companies from different industries as one of the critical issues in supply chain management (Lee, 2011) and 80% of companies analysed are facing carbon risks resulting from emissions in the companies’ supply chain as shown in a study conducted by the Investor Responsibility Research Centre Institute for Corporate Responsibility (IRRCI) and over 80% of the companies analysed found that the majority of greenhouse gas (GHG) emission are from electricity and other direct suppliers (Trucost, 2009). The review of extant literature shows the increased importance of carbon emission issues and the gap in the study of carbon reporting and disclosures and also the study which links corporate environmental reputation and corporate financial performance with carbon reporting (Lohmann, 2009a, Ratnatunga and Balachandran, 2009, Bebbington and Larrinaga-Gonzalez, 2008). This study would focus on investigating the current status of UK carbon emission disclosures, the determinant factors of corporate carbon disclosure, and the relationship between carbon emission disclosures and corporate environmental reputation and financial performance of UK listed companies from 2004-2012 and explore the explanatory power of classical disclosure theories.

Investigating preferences for dynamic electricity tariffs: the effect of environmental and system benefit disclosure

Dynamic electricity pricing can produce efficiency gains in the electricity sector and help achieve energy policy goals such as increasing electric system reliability and supporting renewable energy deployment. Retail electric companies can offer dynamic pricing to residential electricity customers via smart meter-enabled tariffs that proxy the cost to procure electricity on the wholesale market. Current investments in the smart metering necessary to implement dynamic tariffs show policy makers’ resolve for enabling responsive demand and realizing its benefits. However, despite these benefits and the potential bill savings these tariffs can offer, adoption among residential customers remains at low levels. Using a choice experiment approach, this paper seeks to determine whether disclosing the environmental and system benefits of dynamic tariffs to residential customers can increase adoption. Although sampling and design issues preclude wide generalization, we found that our environmentally conscious respondents reduced their required discount to switch to dynamic tariffs around 10% in response to higher awareness of environmental and system benefits. The perception that shifting usage is easy to do also had a significant impact, indicating the potential importance of enabling technology. Perhaps the targeted communication strategy employed by this study is one way to increase adoption and achieve policy goals.

Resources, staff beliefs and organizational culture: factors in the use of information and communication technology for adults with intellectual disabilities

Background  Access to, and the use of, information and communication technology (ICT) is increasingly becoming a vital component of mainstream life. First-order (e.g. time and money) and second-order factors (e.g. beliefs of staff members) affect the use of ICT in different contexts. It is timely to investigate what these factors may be in the context of service provision for adults with intellectual disabilities given the role ICT could play in facilitating communication and access to information and opportunities as suggested in Valuing People. Method  Taking a qualitative approach, nine day service sites within one organization were visited over a period of 6 months to observe ICT-related practice and seek the views of staff members working with adults with intellectual disabilities. All day services were equipped with modern ICT equipment including computers, digital cameras, Internet connections and related peripherals. Results  Staff members reported time, training and budget as significant first-order factors. Organizational culture and beliefs about the suitability of technology for older or less able service users were the striking second-order factors mentioned. Despite similar levels of equipment, support and training, ICT use had developed in very different ways across sites. Conclusion  The provision of ICT equipment and training is not sufficient to ensure their use; the beliefs of staff members and organizational culture of sites play a substantial role in how ICT is used with and by service users. Activity theory provides a useful framework for considering how first- and second-order factors are related. Staff members need to be given clear information about the broader purpose of activities in day services, especially in relation to the lifelong learning agenda, in order to see the relevance and usefulness of ICT resources for all service users.

Large Changes of Static Electric Properties Induced by Hydrogen Bonding: An ab Initio Study of Linear HCN Oligomers

We report the partitioning of the interaction-induced static electronic dipole (hyper)polarizabilities for linear hydrogen cyanide complexes into contributions arising from various interaction energy terms. We analyzed the nonadditivities of the studied properties and used these data to predict the electric properties of an infinite chain. The interaction-induced static electric dipole properties and their nonadditivities were analyzed using an approach based on numerical differentiation of the interaction energy components estimated in an external electric field. These were obtained using the hybrid variational-perturbational interaction energy decomposition scheme, augmented with coupled-cluster calculations, with singles, doubles, and noniterative triples. Our results indicate that the interaction-induced dipole moments and polarizabilities are primarily electrostatic in nature; however, the composition of the interaction hyperpolarizabilities is much more complex. The overlap effects substantially quench the contributions due to electrostatic interactions, and therefore, the major components are due to the induction and exchange induction terms, as well as the intramolecular electron-correlation corrections. A particularly intriguing observation is that the interaction first hyperpolarizability in the studied systems not only is much larger than the corresponding sum of monomer properties, but also has the opposite sign. We show that this effect can be viewed as a direct consequence of hydrogen-bonding interactions that lead to a decrease of the hyperpolarizability of the proton acceptor and an increase of the hyperpolarizability of the proton donor. In the case of the first hyperpolarizability, we also observed the largest nonadditivity of interaction properties (nearly 17%) which further enhances the effects of pairwise interactions.

Maternal health care professionals perspective on the provision and use of antenatal and delivery care : a qualitative descriptive study in rural Vietnam

Background. High quality maternal health care is an important tool to reduce maternal and neonatal mortality. Services offered should be evidence based and adapted to the local setting. This qualitative descriptive study explored the perspectives and experiences of midwives, assistant physicians and medical doctors on the content and quality of maternal health care in rural Vietnam. Method. The study was performed in a rural district in northern Vietnam. Four focus group discussions with health care professionals at primary health care level were conducted. The data was analysed using qualitative manifest and latent content analysis. Result. Two main themes emerged: "Contextual conditions for maternal health care" and "Balancing between possibilities and constraints". Contextual conditions influenced both pregnant women's use of maternal health care and health care professionals' performance. The study participants stated that women's uses of maternal health care were influenced by economical constraints and cultural norms that impeded their autonomy in relation to childbearing. Structural constraints within the health care system included inadequate financing of the primary health care, resulting in lack of human resources, professional re-training and adequate equipment. Conclusion. Contextual conditions strongly influenced the performance and interaction between pregnant women and health care professionals within antenatal care and delivery care in a rural district of Vietnam. Although Vietnam is performing comparatively well in terms of low maternal and child mortality figures, this study revealed midwives' and other health care professionals' perceived difficulties in their daily work. It seemed maternal health care was under-resourced in terms of staff, equipment and continuing education activities. The cultural setting in Vietnam constituting a strong patriarchal society and prevailing Confucian norms limits women's autonomy and reduce their possibility to make independent decisions about their own reproductive health. This issue should be further addressed by policy-makers. Strategies to reduce inequities in maternal health care for pregnant women are needed. The quality of client-provider interaction and management of pregnancy may be strengthened by education, human resources, re-training and provision of essential equipment.