Effect of Thermal Treatments on the Mechanical Properties Enhancement of High Reliability Metallic Materials by Laser Shock Processing

Laser shock processing (LSP) is increasingly applied as an effective technology for the improvement of metallic materials mechanical properties in different types of components as a means of enhancement of their fatigue life behavior. As reported in previous contributions by the authors, a main effect resulting from the application of the LSP technique consists on the generation of relatively deep compression residual stresses fields into metallic components allowing an improved mechanical behaviour, explicitly the life improvement of the treated specimens against wear, crack growth and stress corrosion cracking. Additional results accomplished by the authors in the line of practical development of the LSP technique at an experimental level (aiming its integral assessment from an interrelated theoretical and experimental point of view)are presented in this paper. Concretely, experimental results on the residual stress profiles and associated mechanical properties modification successfully reached in typical materials under different LSP irradiation conditions are presented. In this case, the specific behavior of a widely used material in high reliability components (especially in nuclear and biomedical applications) as AISI 316L is analyzed, the effect of possible “in-service” thermal conditions on the relaxation of the LSP effects being specifically characterized.

Diseño e implementación de un módulo de crecimiento bacteriano dependiente de nutrientes en el simulador GRO

Hace no más de una década que empezó a escucharse el término biología sintética. Este área de estudio emergente consiste en la ingeniería y programación de sistemas biológicos, tratando la biología como una tecnología programable a la que aplican los principios y metodologías de la ingeniería, con el fin de crear nuevas funcionalidades genéticas desde cero, procurando asÍ algún beneficio como por ejemplo, programar células bacterianas para producir biocombustibles. Sin embargo, para la creación de dichas funcionalidades es necesario conocer bien al organismo sobre el que se van a implantar. Por este motivo, los biólogos sintéticos emplean bacterias en sus estudios, ya que es la forma de vida más simple, está presente en prácticamente todos los nichos ecológicos, desempeña algunas de las funcionalidades vitales para los humanos y lo mas importante, se conoce prácticamente todo su material genético. Los experimentos son costosos en tiempo y dinero, siendo necesaria la ayuda de herramientas que faciliten esta labor, los simuladores. En PLASWIRES, proyecto europeo de biología sintética en el que se engloba este este trabajo, el simulador empleado es GRO. Sin embargo, en GRO el crecimiento de las bacterias ocurre de forma exponencial y sin restricciones, generando comportamientos poco realistas. Por ello, se ha considerado relevante en biología sintética, y en el simulador GRO en particular, disponer de un modelo de crecimiento bacteriano dependiente de los nutrientes. El desarrollo de este trabajo se centra en la implementación de un módulo de consumo de nutrientes en colonias de bacterias simuladas con GRO, introduciendo así la limitación de nutrientes y evitanto que las bacterias crezcan exponencialmente. Se han introducido nutrientes en el medio y la capacidad de consumirlos, con el objetivo de obtener un crecimiento ajustado al que ocurre en la naturaleza. Además, se ha desarrollado en GRO una nueva función de adquisición de volumen, que condiciona el volumen adquirido por cada bacteria en función de los nutrientes. La implentación de las dos aportaciones presentadas ha supuesto la adición de funcionalidad extra a GRO, convirtiéndolo en el único simulador de bacterias que tiene en cuenta el crecimiento bacteriano dependiente de nutrientes.---ABSTRACT---It has been in this last decade that the synthetic biology term began to be heard. This emergent area of study consists in the engineering and programming of biological systems, dealing with biology as a programable technology in which the engineering principles and methodologies are applied in order to create novel genetic functinalities from scratch, obtaining some advatages such as programmed bacteria in order to produce biofuels. However, to create this functionalities, it is necessary to know well the organisms in which they are going to be implemented. For this reason, synthetic biology researchers use bacteria, because it is the simplest life form, it can be found in almost all the ecological niche, it does some vital function to humans and, most important, almost all of its genetic information is known. Experiments are expensive in time and money, making it necessary to use tools to ease this task: the simulators. In PLASWIRES, the european synthetic biology project in which this work is included, the simulator used is GRO. However, the bacterial growth in GRO is exponential and it does not have restrictions, generating unrealistic behaviours. Therefore, it has been considered relevant in synthetic biology, and in a particular way in GRO, to provide a bacterial growth model dependent on nutrient. This work focuses on the implementation of a nutrient consumption module in bacteria colonies simulated with GRO, introducing a nuntrient limitation and avoiding the bacteria exponential growth. The module introduces nutrients and the capacity for bacteria to consume them, aiming to obtain realistic growth simulations that fit the observations made in nature. Moreover, an adquisition volumen function has been developed in GRO, determining the volumen depending on nutrients. This two contributions make GRO the only bacteria simulator that computes growth depending on nutrients

Análisis del comportamiento a fatiga de uniones adhesivas de acero recubierto

Los adhesivos se conocen y han sido utilizados en multitud de aplicaciones a lo lago de la historia. En la actualidad, la tecnología de la adhesión como método de unión de materiales estructurales está en pleno crecimiento. Los avances científicos han permitido comprender mejor los fenómenos de adhesión, así como, mejorar y desarrollar nuevas formulaciones poliméricas que incrementan el rango de aplicaciones de los adhesivos. Por otro lado, el desarrollo de nuevos materiales y la necesidad de aligerar peso, especialmente en el sector transporte, hace que las uniones adhesivas se introduzcan en aplicaciones hasta ahora reservadas a otros sistemas de unión como la soldadura o las uniones mecánicas, ofreciendo rendimientos similares y, en ocasiones, superiores a los aportados por estas. Las uniones adhesivas ofrecen numerosas ventajas frente a otros sistemas de unión. En la industria aeronáutica y en automoción, las uniones adhesivas logran una reducción en el número de componentes (tales como los tornillos, remaches, abrazaderas) consiguiendo como consecuencia diseños más ligeros y una disminución de los costes de manipulación y almacenamiento, así como una aceleración de los procesos de ensamblaje, y como consecuencia, un aumento de los procesos de producción. En el sector de la construcción y en la fabricación de equipos industriales, se busca la capacidad para soportar la expansión y contracción térmica. Por lo tanto, se usan las uniones adhesivas para evitar producir la distorsión del sustrato al no ser necesario el calentamiento ni la deformación de las piezas cuando se someten a un calentamiento elevado y muy localizado, como en el caso de la soldadura, o cuando se someten a esfuerzos mecánicos localizados, en el caso de montajes remachados. En la industria naval, se están desarrollando técnicas de reparación basadas en la unión adhesiva para distribuir de forma más uniforme y homogénea las tensiones con el objetivo de mejorar el comportamiento frente a fatiga y evitar los problemas asociados a las técnicas de reparación habituales de corte y soldadura. Las uniones adhesivas al no requerir importantes aportes de calor como la soldadura, no producen modificaciones microestructurales indeseables como sucede en la zona fundida o en la zona afectada térmicamente de las uniones soldadas, ni deteriora los recubrimientos protectores de metales de bajo punto de fusión o de naturaleza orgánica. Sin embargo, las uniones adhesivas presentan una desventaja que dificulta su aplicación, se trata de su durabilidad a largo plazo. La primera causa de rotura de los materiales es la rotura por fatiga. Este proceso de fallo es la causa del 85% de las roturas de los materiales estructurales en servicio. La rotura por fatiga se produce cuando se somete al material a la acción de cargas que varían cíclicamente o a vibraciones durante un tiempo prolongado. Las uniones y estructuras sometidas a fatiga pueden fallar a niveles de carga por debajo del límite de resistencia estática del material. La rotura por fatiga en las uniones adhesivas no se produce por un proceso de iniciación y propagación de grieta de forma estable, el proceso de fatiga va debilitando poco a poco la unión hasta que llega un momento que provoca una rotura de forma rápida. Underhill explica este mecanismo como un proceso de daño irreversible de los enlaces más débiles en determinados puntos de la unión. Cuando se ha producido el deterioro de estas zonas más débiles, su área se va incrementando hasta que llega un momento en que la zona dañada es tan amplia que se produce el fallo completo de la unión. En ensayos de crecimiento de grieta realizados sobre probetas preagrietadas en viga con doble voladizo (DCB), Dessureault identifica los procesos de iniciación y crecimiento de grietas en muestras unidas con adhesivo epoxi como una acumulación de microfisuras en la zona próxima al fondo de grieta que, luego, van coalesciendo para configurar la grieta principal. Lo que supone, igualmente, un proceso de daño del adhesivo en la zona de mayor concentración de tensiones que, posteriormente, conduce al fallo de la unión. La presente tesis surge con el propósito de aumentar los conocimientos existentes sobre el comportamiento a fatiga de las uniones adhesivas y especialmente las realizadas con dos tipos de adhesivos estructurales aplicados en aceros con diferentes acabados superficiales. El estudio incluye la obtención de las curvas de tensión frente al número de ciclos hasta el fallo del componente, curvas SN o curvas de Wöhler, que permitirán realizar una estimación de la resistencia a la fatiga de un determinado material o estructura. Los ensayos de fatiga realizados mediante ciclos predeterminados de carga sinusoidales, de amplitud y frecuencia constantes, han permitido caracterizar el comportamiento a la fatiga por el número de ciclos hasta la rotura, siendo el límite de fatiga el valor al que tiende la tensión cuando el número de ciclos es muy grande. En algunos materiales, la fatiga no tiende a un valor límite sino que decrece de forma constante a medida que aumenta el número de ciclos. Para estas situaciones, se ha definido la resistencia a la fatiga (o límite de resistencia) por la tensión en que se produce la rotura para un número de ciclos predeterminado. Todos estos aspectos permitirán un mejor diseño de las uniones y las condiciones de trabajo de los adhesivos con el fin de lograr que la resistencia a fatiga de la unión sea mucho más duradera y el comportamiento total de la unión sea mucho mejor, contribuyendo al crecimiento de la utilización de las uniones adhesivas respecto a otras técnicas. ABSTRACT Adhesives are well-known and have been used in many applications throughout history. At present, adhesion bonding technology of structural materials is experiencing an important growth. Scientific advances have enabled a better understanding of the phenomena of adhesion, as well as to improve and develop new polymeric formulations that increase the range of applications. On the other hand, the development of new materials and the need to save weight, especially in the transport sector, have promote the use of adhesive bonding in many applications previously reserved for other joining technologies such as welded or mechanical joints, presenting similar or even higher performances. Adhesive bonding offers many advantages over other joining methods. For example, in the aeronautic industry and in the automation sector, adhesive bonding allows a reduction in the number of components (such as bolts, rivets, clamps) and as consequence, resulting in lighter designs and a decrease in handling and storage costs, as well as faster assembly processes and an improvement in the production processes. In the construction sector and in the industrial equipment manufacturing, the ability to withstand thermal expansion and contraction is required. Therefore, adhesion bonding technology is used to avoid any distortion of the substrate since this technology does not require heating nor the deformation of the pieces when these are exposed to very high and localized heating, as in welding, or when are subjected to localized mechanical stresses in the case of riveted joints. In the naval industry, repair techniques based in the adhesive bonding are being developed in order to distribute stresses more uniform and homogeneously in order to improve the performance against fatigue and to avoid the problems associated with standard repair techniques as cutting and welding. Adhesive bonding does not require the use of high temperatures and as consequence they do not produce undesirable microstructural changes, as it can be observed in molten zones or in heat-affected zones in the case of welding, neither is there damage of the protective coating of metals with low melting points or polymeric films. However, adhesive bonding presents a disadvantage that limits its application, the low longterm durability. The most common cause of fractures of materials is fatigue fracture. This failure process is the cause of 85% of the fracture of structural materials in service. Fatigue failure occurs when the materials are subjected to the action of cyclic loads or vibrations for a long period of time. The joints and structures subjected to fatigue can fail at stress values below the static strength of the material. Fatigue failure do not occurs by a static and homogeneous process of initiation and propagation of crack. The fatigue process gradually weakens the bond until the moment in which the fracture occurs very rapidly. Underhill explains this mechanism as a process of irreversible damage of the weakest links at certain points of the bonding. When the deterioration in these weaker zones occurs, their area increase until the damage zone is so extensive that the full failure of the joint occurs. During the crack growth tests performed on precracked double-cantilever beam specimen, (DCB), Dessureault identified the processes of crack initiation and growth in samples bonded with epoxy adhesive as a process of accumulation of microcracks on the zone near the crack bottom, then, they coalesced to configure the main crack. This is a damage process of the adhesive in the zone of high stress concentration that leads to failure of the bond. This thesis aims to further the understanding of the fatigue behavior of the adhesive bonding, primarily those based on two different types of structural adhesives used on carbon-steel with different surface treatments. This memory includes the analysis of the SN or Wöhler curves (stress vs. number of cycles curves up to the failure), allowing to carry out an estimation of the fatigue strength of a specific material or structure. The fatigue tests carried out by means of predetermined cycles of sinusoidal loads, with a constant amplitude and frequency, allow the characterisation of the fatigue behaviour. For some materials, there is a maximum stress amplitude below which the material never fails for any number of cycles, known as fatigue limit. In the other hand, for other materials, the fatigue does not tend toward a limit value but decreases constantly as the number of cycles increases. For these situations, the fatigue strength is defined by the stress at which the fracture occurs for a predetermined number of cycles. All these aspects will enable a better joint design and service conditions of adhesives in order to get more durable joints from the fatigue failure point of view and in this way contribute to increase the use of adhesive bonding over other joint techniques.

Urban microclimate and thermal comfort modelling: strategies for urban renovation

The urban microclimate plays an important role in building energy consumption and thermal comfort in outdoor spaces. Nowadays, cities need to increase energy efficiency, reduce pollutant emissions and mitigate the evident lack of sustainability. In light of this, attention has focused on the bioclimatic concepts use in the urban development. However, the speculative unsustainability of the growth model highlights the need to redirect the construction sector towards urban renovation using a bioclimatic approach. The public space plays a key role in improving the quality of today’s cities, especially in terms of providing places for citizens to meet and socialize in adequate thermal conditions. Thermal comfort affects perception of the environment, so microclimate conditions can be decisive for the success or failure of outdoor urban spaces and the activities held in them. For these reasons, the main focus of this work is on the definition of bioclimatic strategies for existing urban spaces, based on morpho-typological components, urban microclimate conditions and comfort requirements for all kinds of citizens. Two case studies were selected in Madrid, in a social housing neighbourhood constructed in the 1970s based on Rational Architecture style. Several renovation scenarios were performed using a computer simulation process based in ENVI-met and diverse microclimate conditions were compared. In addition, thermal comfort evaluation was carried out using the Universal Thermal Climate Index (UTCI) in order to investigate the relationship between microclimate conditions and thermal comfort perception. This paper introduces the microclimate computer simulation process as a valuable support for decision-making for neighbourhood renovation projects in order to provide new and better solutions according to the thermal quality of public spaces and reducing energy consumption by creating and selecting better microclimate areas.

ANALISANDO A RELAÇÃO DOS VOLUMES DE EXPORTAÇÃO E DE IMPORTAÇÃO, PIB, TAXAS DE CÂMBIO E INFLAÇÃO NO PERÍODO DE 2004 A 2014.

Esta dissertação visa deslumbrar uma análise macroeconômica do Brasil, especialmente no que se refere à relação dos índices mensais dos volumes das exportações e das importações com os volumes mensais do PIB, da Taxa SELIC e as Taxas de Câmbio, conforme dados coletados no período de janeiro de 2004 a dezembro de 2014, através de pesquisa literária referente aos históricos sobre cada conceito envolvido no âmbito da macroeconomia das varáveis estudadas. Foi realizado um estudo de caso embasado em dados de sites governamentais, no período delimitado, empregando-se o método de regressão linear, com base na Teoria da correlação de Pearson, demonstrando os resultados obtidos no período do estudo para as varáveis estudadas. Desta maneira, conseguiu-se estudar e analisar como as variáveis dependentes (resposta): volume das exportações e volume das importações estão relacionadas com as varáveis independentes (explicativas): PIB, Taxa Selic e taxa de Câmbio. Os resultados apurados no presente estudo permitem identificar que existe correlação moderada e negativa, quando analisadas a Taxa Selic e a Taxa de Câmbio com os volumes das exportações e das importações, enquanto o PIB apresenta correlação forte e positiva na análise com os volumes das exportações e das importações

Identifying the role of natural resources in knowledge-based strategies of development

Knowledge has adopted a preferential role in the explanation of development while the evidence about the effect of natural resources in countries’ performance is more controversial in the economic literature. This paper tries to demonstrate that natural resources may positively affect growth in countries with a strong natural resources specialization pattern although the magnitude of these effects depend on the type of resources and on other aspects related to the production and innovation systems. The positive trajectory described by a set of national economies mainly specialized in natural resources and low-tech industries invites us to analyze what is the combination of factors that serves as engine for a sustainable development process. With panel data for the period 1996-2008 we estimate an applied growth model where both traditional factors and other more related to innovation and absorptive capabilities are taken into account. Our empirical findings show that according to the postulates of a knowledge-based approach, a framework that combines physical and intangible factors is more suitable for the definition of development strategies in those prosperous economies dominated by natural resources and connected activities, while the internationalization process of activities and technologies become also a very relevant aspect.

Resistência à fadiga de tubo API 5L X65 cladeado e soldado circunferencialmente com eletrodos de Inconel® 625

As recentes descobertas de petróleo e gás na camada do Pré-sal representam um enorme potencial exploratório no Brasil, entretanto, os desafios tecnológicos para a exploração desses recursos minerais são imensos e, consequentemente, têm motivado o desenvolvimento de estudos voltados a métodos e materiais eficientes para suas produções. Os tubos condutores de petróleo e gás são denominados de elevadores catenários ou do inglês \"risers\", e são elementos que necessariamente são soldados e possuem fundamental importância nessa cadeia produtiva, pois transportam petróleo e gás natural do fundo do mar à plataforma, estando sujeitos a carregamentos dinâmicos (fadiga) durante sua operação. Adicionalmente, um dos problemas centrais à produção de óleo e gás das reservas do Pré-Sal está diretamente associado a meios altamente corrosivos, tais como H2S e CO2. Uma forma mais barata de proteção dos tubos é a aplicação de uma camada de um material metálico resistente à corrosão na parte interna desses tubos (clad). Assim, a união entre esses tubos para formação dos \"risers\" deve ser realizada pelo emprego de soldas circunferenciais de ligas igualmente resistentes à corrosão. Nesse contexto, como os elementos soldados são considerados possuir defeitos do tipo trinca, para a garantia de sua integridade estrutural quando submetidos a carregamentos cíclicos, é necessário o conhecimento das taxas de propagação de trinca por fadiga da solda circunferencial. Assim, neste trabalho, foram realizados ensaios de propagação de trinca por fadiga na região da solda circunferencial de Inconel® 625 realizada em tubo de aço API 5L X65 cladeado, utilizando corpos de prova do tipo SEN(B) (Single Edge Notch Bending) com relações entre espessura e largura (B/W) iguais a 0,5, 1 e 2. O propósito central deste trabalho foi de obter a curva da taxa de propagação de trinca por fadiga (da/dN) versus a variação do fator de intensidade de tensão (ΔK) para o metal de solda por meio de ensaios normatizados, utilizando diferentes técnicas de acompanhamento e medição da trinca. A monitoração de crescimento da trinca foi feita por três técnicas: variação da flexibilidade elástica (VFE), queda de potencial elétrico (QPE) e análise de imagem (Ai). Os resultados mostraram que as diferentes relações B/W utilizadas no estudo não alteraram significantemente as taxas de propagação de trinca por fadiga, respeitado que a propagação aconteceu em condições de escoamento em pequena escala na frente da trinca. Os resultados de propagação de trinca por fadiga permitiram a obtenção das regiões I e II da curva da/dN versus ΔK para o metal de solda. O valor de ΔKlim obtido para o mesmo foi em torno de 11,8 MPa.m1/2 e os valores encontrados das constantes experimentais C e m da equação de Paris-Erdogan foram respectivamente iguais a 1,55 x10-10 [(mm/ciclo)/(MPa.m1/2)m] e 4,15. A propagação de trinca no metal de solda deu-se por deformação plástica, com a formação de estrias de fadiga.

Emergent Brazil and the Curse of the ‘Hen’s Flight’. CEPS Working Document No. 379, 27 February 2013

The ‘Emergent Brazil’ growth model is reaching its limits. Its main engines have been slowing significantly since the beginning of the global financial and economic crisis. Even its much-praised predictable macroeconomic policy has been eroded by political interference. Inflationary pressures are growing and GDP performance is anaemic. As ominous, Brazil cannot compensate for its domestic deficiencies with an export drive. Commodity exports are suffering with the world economic slow-down and the manufacturing industries’ competitiveness is in sharp decline. Brazil has put all its trade negotiation eggs into the South American and WTO baskets, and now its export market share is threatened by the Doha Round paralysis, the Latin American Alianza del Pacífico, and the US-led initiatives for a Trans-Pacific Partnership and a trade and investment agreement with the EU. Paradoxically, this alarming situation opens a window of opportunity. There is a mounting national consensus on the need to tackle head-on the country’s and its industries’ lack of competitiveness. That means finding a solution to the much-decried ‘Brazil Cost’ and stimulating private-sector investment. It also entails an aggressive trade-negotiating stance in order to secure better access to foreign markets and to foster more competition in the domestic one. The most promising near-term goal would be the conclusion of the EU–Mercosur trade talks. A scenario to overcome the paralysis of these negotiations could trail two parallel paths: bilateral EU–Brazil agreements on ‘anything but trade’ combined with a sequencing of the EU–Mercosur talks where each member of the South American bloc could adopt faster or slower liberalisation commitments and schedules.

Cyclical dimensions of labour mobility after EU enlargement. Bruegel Working Paper 2009/03, May 2009

At a time of symmetric global slowdown, migration cannot contribute as much to absorbing economic shocks as it could if the shock were asymmetric. • Early evidence suggests that the crisis has led to a drop in immigration and even net return migration from some countries. This has helped the adjustment of former EU15 host countries and has exacerbated adjustment in former source countries in the new member states. In the short run, the stock of new member-state migrants in the EU15 will fall owing to diminished job opportunities for migrants. • Changes in the unemployment rate in the host country are found to impact migration more than that of changes in the unemployment rate in the source country. In part, this can be explained by the disproportionate risk of migrants losing their jobs in the downturn. • In the longer run, the crisis is set to increase migration from the new member states compared to what would have been the case without the crisis. This is because the crisis has undermined the economic growth model of those new member states that relied heavily on external financing to fuel their growth.

Social cohesion in Europe after the crisis

In the last few years, Europe has been forced to re-think its socio-economic model. Social indicators speak for themselves. Real household income declined significantly between 2008 and 2012, employment rates are lower and the number of people in poverty saw a steady rise with a growing divergence between EU countries. In the eurozone, cuts in public spending and internal devaluation have been the main tools to aim at a correction of unsustainable fiscal positions and a strengthening of competitiveness. It has carried a heavy social price tag. Outside of the eurozone, austerity has also been the prevailing policy, seen as inevitable to avoid economic instability. The crisis has not hit everyone equally. The general losses have been high, but there have also been some quite important redistributive effects. With all the difficulties of defining and measuring 'fairness', it is clear that the adjustment has not been equitable. Apart from issues of market failure, there have been direct increases of inequality within each of the member states. Higher poverty rates have been observed, rises in inequalities between higher and lower income earners as well as intergenerational inequalities between age groups. Long-term consequences are only beginning to surface in the public debate as the most immediate pressures of the crisis are slowly overcome. In this report, the authors first of all look at the results of the survey we have carried out in seven European countries and review perceptions of the socio-economic model. Subsequently, they assess the importance of the social dimension in the broader context of the European growth model. The authors discuss the impact of the structural challenges of globalisation, demography and technological change. They then review the EU’s performance in the crisis. Finally, the authors make a number of recommendations on how to bridge the gap between Europeans‘ expectations and reality.

Growing global brands in foreign markets: A brand equity perspective. Impact of national culture on trademark registrations in emerging economy: Evidence from Russia. ACES Working Papers, August 2010

In this study we explore how firms deploy intellectual property assets (trademarks) in international context and the impact of cultural characteristics on such activities. Trademarks capture important elements of firm's brand-building efforts. Using growth model, a special case of hierarchical linear model, we demonstrate that that stock of trademarks in foreign market increase future trademark activity. Also, we explore the moderating roles of two cultural dimensions, individualism and masculinity, on such relationships. The findings indicated that firms from countries closer to host market (Russia) on individualism dimension tend to register more trademarks in host market. The opposite result is observed for masculinity dimension.

Internationalising the currency while leveraging massively: the case of China. Bruegel Working Paper 2015/12, October 2015

This paper reviews the steps that China has taken towards financial reform with a particular focus on capital account liberalisation and internationalisation of the use of the renminbi. • After a slowdown in reform momentum during the global financial crisis, there is a clear push towards reform, especially in terms of RMB internationalisation. • During the same period, though, China’s debt has doubled, reaching levels that are clearly above those of most emerging markets. This increases the risks embedded in financial reform and, in particular, capital account liberalisation. • At this juncture, however, China has no option but to press for reform since the current growth model is no longer working and China urgently needs to better allocate its savings.

Aspects of Markov Chains and Particle Systems

Thesis (Ph.D.)--University of Washington, 2016-06

Analysis of service stress corrosion cracking in a natural gas transmission pipeline, active or dormant?

Stress corrosion cracks (SCC) had been found in a natural gas transmission pipeline during a dig-up and inspection program. The question was raised as to whether the SCC was active or dormant. This paper describes the resultant investigation to determine if a particular service crack was actively growing. The strategy adopted was to assess the appearance of the fracture surface of the service crack and to compare with expectations from laboratory specimens with active SCC. The conclusions from this study are as follows. To judge whether a crack in the service pipe is active or dormant, it is reasonable to compare the very crack tip of the service crack and a fresh crack in a laboratory sample. If the crack tip of the active laboratory sample is similar to that of the service pipe, it means the crack in the service pipe is likely to be active. From the comparison of the crack tip between the service pipe and the laboratory samples, it appears likely that the cracks in the samples extracted from service were most likely to have been active intergranular stress corrosion cracks. (C) 2003 Elsevier Ltd. All rights reserved.