New accelerator system for low temperature curing of elastomers with special reference to NR, NBR and NR/BR blends

The primary objective of this work is to develop an efficient accelerator system for low temperature vulcanization of rubbers. Although xanthates are known to act as accelerators for low temperature vulcanization, a systematic study on the mechanism of vulcanization, the mechanical properties of the vulcanizates at varying temperatures of vulcanization, cure characteristics etc are not reported. Further. xanthate based curing systems are not commonly used because of their chance for premature vulcanization during processing. The proposed study is to develop a novel accelerator system for the low temperature vulcanization of rubbers having enough processing safely. lt is also proposed to develop a method for the prevulcanisation of natural rubber latex at room temperature. As already mentioned the manufacture of rubber products at low temperature will improve its quality and appearance. Also, energy consumption can be reduced by low temperature vulcanization. in addition, low temperature vulcanization will be extremely useful in the area of repair of defective products, since subjecting finished products to high temperatures during the process of repair will adversely affect the quality of the product. Further. room temperature curing accelerator systems will find extensive applications in surface coating industries.

Amidino Thiourea as a Secondary Accelerator in Rubber Vulcanization

Earlier studies5773 in our laboratory showed that when a nucleophile is used along with disulphide or sulphenamide accelerators the vulcanization is accelerated greatly and the reaction mechanism is generally nucleophilic in nature. However it was observed that it also changes with the systems under review. The present study, deals with the use of unsubstituted amidino thiourea i.e. aminoimino methyl thiourea(AMT) V in the vulcanization studies of different elastorners and their blends. One of the aims of this study was to get further proof with regard to the theory of nucleophilic reaction mechanism in such binary systems.Mixes containing thiourea are used as controls. AMT is more nucleophilic than TU and this is clear from the fact that the fonner can condense with isothiocynate even in the absence of alkali while TU cannot". Also the guanidinyl group in AMT can facilitate the polarization of the C=S bond favouring a nucleophilic reaction

Influence of Major Operational Parameters on Aerobic Granulation for the Treatment of Wastewater

Effective solids-liquid separation is the basic concept of any wastewater treatment system. Biological treatment methods involve microorganisms for the treatment of wastewater. Conventional activated sludge process (ASP) poses the problem of poor settleability and hence require a large footprint. Biogranulation is an effective biotechnological process which can overcome the drawbacks of conventional ASP to a great extent. Aerobic granulation represents an innovative cell immobilization strategy in biological wastewater treatment. Aerobic granules are selfimmobilized microbial aggregates that are cultivated in sequencing batch reactors (SBRs). Aerobic granules have several advantages over conventional activated sludge flocs such as a dense and compact microbial structure, good settleability and high biomass retention. For cells in a culture to aggregate, a number of conditions have to be satisfied. Hence aerobic granulation is affected by many operating parameters. The organic loading rate (OLR) helps to enrich different bacterial species and to influence the size and settling ability of granules. Hence, OLR was argued as an influencing parameter by helping to enrich different bacterial species and to influence the size and settling ability of granules. Hydrodynamic shear force, caused by aeration and measured as superficial upflow air velocity (SUAV), has a strong influence and hence it is used to control the granulation process. Settling time (ST) and volume exchange ratio (VER) are also two key influencing factors, which can be considered as selection pressures responsible for aerobic granulation based on the concept of minimal settling velocity. Hence, these four parameters - OLR, SUAV, ST and VER- were selected as major influencing parametersfor the present study. Influence of these four parameters on aerobic granulation was investigated in this work

Studies on the use of Nanokaolin, MWCNT and Graphene in NBR and SBR

The current research investigates the possibility of using unmodified and modified nanokaolin, multiwalled carbon nanotube (MWCNT) and graphene as fillers to impart enhancement in mechanical, thermal, and electrical properties to the elastomers. Taking advantage of latex blending method, nanoclay, MWCNT and graphene dispersions, prepared by ultra sound sonication are dispersed in polymer latices. The improvement in material properties indicated better interaction between filler and the polymer.MWCNT and graphene imparted electrical conductivity with simultaneous improvement in mechanical properties. Layered silicates prepared by microwave method also significantly improve the mechanical properties of the nanocomposites. The thesis entitled ‘Studies on the use of Nanokaolin, MWCNT and Graphene in NBR and SBR’ consists of ten chapters. The first chapter is a concise introduction of nanocomposites, nanofillers, elastomeric matrices and applications of polymer nanocomposites. The state-of-art research in elastomer based nanocomposites is also presented. At the end of this chapter the main objectives of the work are mentioned. Chapter 2 outlines the specifications of various materials used, details of experimental techniques employed for preparing and characterizing nanocomposites. Chapter3 includes characterization of the nanofillers, optimsation of cure time of latex based composites and the methods used for the preparation of latex based and dry rubber based nanocomposites. Chapter4 presents the reinforcing effect of the nanofillers in XNBR latex and the characterization of the nanocomposites. Chapter5 comprises the effect of nanofillers on the properties of SBR latex and their characterization Chapter 6 deals with the study of cure characteristics, mechanical and thermal properties and the characterization of NBR based nanocomposites. Chapter7 is the microwave studies of MWCNT and graphene filled elastomeric nanocomposites. Chapter 8 gives details of the preparation of layered silicates, their characterization and use in different elastomeric matrices. Chapter 9 is the study of mechanical properties of nanoclay incorporated nitrile gloves .Chapter 10 presents the summary and conclusions of the investigation.

Copoasú y su plan de negocio

Copoasú será una empresa innovadora en donde se ofrecerán postres típicos colombinos con preparación tradicional y tipo gourmet, combinados con una gran variedad de bebidas típicas y tradicionales que transportarán a las personas a su lugar de origen. El punto de venta de Copoasú estará dividido con decoración que concuerde con las regionales naturales de Colombia, atendido con servicio de excelente calidad para que el cliente se sienta como en casa. Los postres serán elaborados en el mismo punto de venta por practicidad y frescura del producto por lo que el punto de venta va a tener la dotación y personal adecuado para este tipo de preparación, además de unos excelentes insumos que nos permita mantener la misma calidad en el producto. De igual manera se realizarán controles frecuentes con el fin de comprobar que no se está perdiendo la receta original, siempre buscando el mejoramiento continuo de todos y cada uno de los productos ofrecidos por Copoasú. Para la escogencia de la localización del punto de venta, como del mercado, del mercado se realizó una segmentación geográfica, escogiendo la localidad de Chapinero por tener zonas representativas para el mercado de la empresa como lo son la zona T y G .El mercado objetivo son de 345.325 personas de estrato 4,5 y 6 de edades entre 24 y 38 años con ingresos mensuales promedio entre 800.000 y 1’700.000. Se analizaron los principales competidores de Copoasu firmas como Miryam Camhi, quien lleva más de veinte y cinco años en el mercado; H&B con apenas un año de funcionamiento; Rausch, que tiene muy poco tiempo de ingresó al mercado y finalmente Jaques, quien lleva diez años de funcionamiento. Bajo los supuestos conservadores establecidos para el modelo financiero Copoasú, demostró ser viable según el análisis del balance proyectado. El punto IV de equilibrio se alcanza al finalizar el segundo año de operación.

Class Test Generator

A combination of perl scripts and LaTeX files, this generates multiple multiple choice class tests from a single set of questions. You input a list of questions and answers into a text file. The script then produces any number of class tests that can be used, together with master answer sheets, by scrambling the order of the questions and the answers. Includes a detailed README file, but best just to try it and see.

MA158exam01

Exam questions and solutions in LaTex

Inventory control exercises

Exercises and solutions in LaTex

Exercise sheet 9

Exercises and solutions in LaTex

Exam 1999

Exam and solutions in LaTex

Exercise sheet 8

Exercises and solutions in LaTex

Arc Length

Exam questions and solutions in LaTex

Exercise sheet 5

Exercises and solutions in LaTex

Exercise sheet 11

Exercises and solutions in LaTex

Exercise sheet 3

Exercises and solutions in LaTex