Design energy input spectra for high seismicity regions based on Turkish registers

This work proposes design energy spectra in terms of an equivalent velocity, intended for regions with design peak acceleration 0.3 g or higher. These spectra were derived through linear and nonlinear dynamic analyses on a number of selected Turkish strong ground motion records. In the long and mid period ranges the analyses are linear, given the relative insensitivity of the spectra to structural parameters other than the fundamental period; conversely, in the short period range, the spectra are more sensitive to the structural parameters and, hence, nonlinear analyses are required. The selected records are classified in eight groups with respect to soil type (stiff or soft soil), the severity of the earthquake in terms of surface magnitude Ms(Ms≤ 5.5 and Ms> 5.5) and the relevance of the near-source effects (impulsive or vibratory). For each of these groups, median and characteristic spectra are proposed; such levels would respectively correspond to 50 and 95 % percentiles. These spectra have an initial linear growing branch in the short period range, a horizontal branch in the mid period range and a descending branch in the long period range. Empirical criteria for estimating the hysteretic energy from the input energy are suggested. The proposed design spectra are compared with those obtained from other studies.

An engineering modification of the blade element momentum combination applicable in vertical descent flight :fundamentals and validation

An engineering modification of blade element/momentum theory is applied to describe the vertical autorotation of helicopter rotors. A full non‐linear aerodynamic model is considered for the airfoils, taking into account the dependence of lift and drag coefficients on both the angle of attack and the Reynolds number. The proposed model, which has been validated in previous work, has allowed the identification of different autorotation modes, which depend on the descent velocity and the twist of the rotor blades. These modes present different radial distributions of driven and driving blade regions, as well as different radial upwash/downwash patterns. The number of blade sections with zero tangential force, the existence of a downwash region in the rotor disk, the stability of the autorotation state, and the overall rotor autorotation efficiency, are all analyzed in terms of the flight velocity and the characteristics of the rotor. It is shown that, in vertical autorotation, larger blade twist leads to smaller values of descent velocity for a given thrust generated by the rotor in the autorotational state.

An engineering modification of the blade element momentum equation for vertical descent : an autoration case study

An engineering modification of blade element/momentum theory is applied to describe the vertical autorotation of helicopter rotors. A full non-linear aerodynamic model is considered for the airfoils, taking into account the dependence of lift and drag coefficients on both the angle of attack and the Reynolds number. The proposed model, which has been validated in previous work, has allowed the identification of different autorotation modes, which depend on the descent velocity and the twist of the rotor blades. These modes present different radial distributions of driven and driving blade regions, as well as different radial upwash/downwash patterns. The number of blade sections with zero tangential force, the existence of a downwash region in the rotor disk, the stability of the autorotation state, and the overall rotor autorotation efficiency, are all analyzed in terms of the flight velocity and the characteristics of the rotor. It is shown that, in vertical autorotation, larger blade twist leads to smaller values of descent velocity for a given thrust generated by the rotor in the autorotational state.

Rational engineering of a miniprotein that reproduces the core of the CD4 site interacting with HIV-1 envelope glycoprotein

Protein–protein interacting surfaces are usually large and intricate, making the rational design of small mimetics of these interfaces a daunting problem. On the basis of a structural similarity between the CDR2-like loop of CD4 and the β-hairpin region of a short scorpion toxin, scyllatoxin, we transferred the side chains of nine residues of CD4, central in the binding to HIV-1 envelope glycoprotein (gp120), to a structurally homologous region of the scorpion toxin scaffold. In competition experiments, the resulting 27-amino acid miniprotein inhibited binding of CD4 to gp120 with a 40 μM IC50. Structural analysis by NMR showed that both the backbone of the chimeric β-hairpin and the introduced side chains adopted conformations similar to those of the parent CD4. Systematic single mutations suggested that most CD4 residues from the CDR2-like loop were reproduced in the miniprotein, including the critical Phe-43. The structural and functional analysis performed suggested five additional mutations that, once incorporated in the miniprotein, increased its affinity for gp120 by 100-fold to an IC50 of 0.1–1.0 μM, depending on viral strains. The resulting mini-CD4 inhibited infection of CD4+ cells by different virus isolates. Thus, core regions of large protein–protein interfaces can be reproduced in miniprotein scaffolds, offering possibilities for the development of inhibitors of protein–protein interactions that may represent useful tools in biology and in drug discovery.

Rapid generation of incremental truncation libraries for protein engineering using α-phosphothioate nucleotides

Incremental truncation for the creation of hybrid enzymes (ITCHY) is a novel tool for the generation of combinatorial libraries of hybrid proteins independent of DNA sequence homology. We herein report a fundamentally different methodology for creating incremental truncation libraries using nucleotide triphosphate analogs. Central to the method is the polymerase catalyzed, low frequency, random incorporation of α-phosphothioate dNTPs into the region of DNA targeted for truncation. The resulting phosphothioate internucleotide linkages are resistant to 3′→5′ exonuclease hydrolysis, rendering the target DNA resistant to degradation in a subsequent exonuclease III treatment. From an experimental perspective the protocol reported here to create incremental truncation libraries is simpler and less time consuming than previous approaches by combining the two gene fragments in a single vector and eliminating additional purification steps. As proof of principle, an incremental truncation library of fusions between the N-terminal fragment of Escherichia coli glycinamide ribonucleotide formyltransferase (PurN) and the C-terminal fragment of human glycinamide ribonucleotide formyltransferase (hGART) was prepared and successfully tested for functional hybrids in an auxotrophic E.coli host strain. Multiple active hybrid enzymes were identified, including ones fused in regions of low sequence homology.

Potential use of additivity of mutational effects in simplifying protein engineering.

The problem of rationally engineering protein molecules can be simplified where effects of mutations on protein function are additive. Crystal structures of single and double mutants in the hydrophobic core of gene V protein indicate that structural and functional effects of core mutations are additive when the regions structurally influenced by the mutations do not substantially overlap. These regions of influence can provide a simple basis for identifying sets of mutations that will show additive effects.

Modification of the substrate specificity of an acyl-acyl carrier protein thioesterase by protein engineering.

The plant acyl-acyl carrier protein (ACP) thioesterases (TEs) are of biochemical interest because of their roles in fatty acid synthesis and their utilities in the bioengineering of plant seed oils. When the FatB1 cDNA encoding a 12:0-ACP TE (Uc FatB1) from California bay, Umbellularia californica (Uc) was expressed in Escherichia coli and in developing oilseeds of the plants Arabidopsis thaliana and Brassica napus, large amounts of laurate (12:0) and small amounts of myristate (14:0) were accumulated. We have isolated a TE cDNA from camphor (Cinnamomum camphorum) (Cc) seeds that shares 92% amino acid identity with Uc FatB1. This TE, Cc FatB1, mainly hydrolyzes 14:0-ACP as shown by E. coli expression. We have investigated the roles of the N- and C-terminal regions in determining substrate specificity by constructing two chimeric enzymes, in which the N-terminal portion of one protein is fused to the C-terminal portion of the other. Our results show that the C-terminal two-thirds of the protein is critical for the specificity. By site-directed mutagenesis, we have replaced several amino acids in Uc FatB1 by using the Cc FatB1 sequence as a guide. A double mutant, which changes Met-197 to an Arg and Arg-199 to a His (M197R/R199H), turns Uc FatB1 into a 12:0/14:0 TE with equal preference for both substrates. Another mutation, T231K, by itself does not effect the specificity. However, when it is combined with the double mutant to generate a triple mutant (M197R/R199H/T231K), Uc FatB1 is converted to a 14:0-ACP TE. Expression of the double-mutant cDNA in E. coli K27, a strain deficient in fatty acid degradation, results in accumulation of similar amounts of 12:0 and 14:0. Meanwhile the E. coli expressing the triple-mutant cDNA produces predominantly 14:0 with very small amounts of 12:0. Kinetic studies indicate that both wild-type Uc FatB1 and the triple mutant have similar values of Km,app with respect to 14:0-ACP. Inhibitory studies also show that 12:0-ACP is a good competitive inhibitor with respect to 14:0-ACP in both the wild type and the triple mutant. These results imply that both 12:0- and 14:0-ACP can bind to the two proteins equally well, but in the case of the triple mutant, the hydrolysis of 12:0-ACP is severely impaired. The ability to modify TE specificity should allow the production of additional "designer oils" in genetically engineered plants.

New Middle East Cold War: Saudi Arabia and Iran's Rivalry

The competing powers of Saudi Arabia and Iran continue to redress and reverse the strategic imbalance and direction of the Middle East’s regional politics. The 1979 Iranian Revolution catapulted these two states into an embittered rivalry. The fall of Saddam Hussein following the 2003 U.S. led invasion, the establishment of a Shi’ite Iraq and the 2011 Arab Uprisings have further inflamed tensions between Saudi Arabia and Iran. Iran and Saudi Arabia have not confronted each other militarily, but rather have divided the region into two armed camps on the basis of political and religious ideology in seeking regional allies and promulgating sectarianism as they continue to exploit the region’s weak states in a series of proxy wars ranging from conflicts in Iraq to Lebanon. The Saudi-Iranian strategic and geopolitical rivalry is further complicated by a religious and ideological rivalry, as tensions represent two opposing aspirations for Islamic leadership with two vastly differing political systems. The conflict is between Saudi Arabia, representing Sunni Islam via Wahhabism, and Iran, representing Shi’ite Islam through Khomeinism. The nature of the Saudi-Iranian rivalry has led many Middle East experts to identify their rivalry as a “New Middle East Cold War.” The Saudi-Iranian rivalry has important implications for regional stability and U.S. national security interests. Therefore, this thesis seeks to address the question: Is a cold war framework applicable when analyzing the Saudi Arabian and Iranian relationship?

Mapping Binary Liquid-Vapor or Liquid-Liquid-Vapor Equilibria Regions, including the Different Azeotropic Behaviours, as a Function of the NRTL Binary Parameters

13th Mediterranean Congress of Chemical Engineering (Sociedad Española de Química Industrial e Ingeniería Química, Fira Barcelona, Expoquimia), Barcelona, September 30-October 3, 2014

Battle of Cold Harbor, Virginia and vicinity, 1864 (Raster Image)

This layer is a georeferenced raster image of the untitled historic paper manuscript map: [Map of the Battle of Cold Harbor, Virginia and vicinity]. Scale not given. Covers a portion of Hanover County, Virginia, showing features in the region surrounding the Cold Harbor Battlefield, Virginia, 1864. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Virginia State Plane South Coordinate System (in Meters) (Fipszone 4502). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, or other information associated with the principal map. This map shows features such as roads, towns and villages, drainage, dwellings with names of inhabitants, troop locations with dates, and more. This layer is part of a selection of digitally scanned and georeferenced historic maps of the Civil War from the Harvard Map Collection. Many items from this selection are from a collection of maps deposited by the Military Order of the Loyal Legion of the United States Commandery of the State of Massachusetts (MOLLUS) in the Harvard Map Collection in 1938. These maps typically portray both natural and manmade features, in particular showing places of military importance. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

The differential evolution of hot- and cold-dust in galaxies in the last 7.5 GYR

Tese de mestrado em Física, apresentada à Universidade de Lisboa, através da Faculdade de Ciências, 2016

Will Crimea herald a new post-Cold War era world? EPC Commentary, 7 April 2014

The end of the Cold War twenty-five years ago brought about a difficult but manageable world in which Russia, the US, and European countries cooperated to manage common problems. There have been difficult times, with the break up of former Yugoslavia, the NATO intervention for Kosovo, and in 2008 when Russia’s intervention in Georgia’s breakaway regions of South Ossetia and Abkahzia nearly led to a head to head with the West. On the whole, the cooperation between old foes which framed the end of the Cold War, resisted these tests. The Helsinki Final Act of 1975 and the agreement not to redraw the map of Europe was never so evidently ignored as today.

Integrated analysis of small cities intercity transportation to facilitate the achievement of regional urban goals. Intercity transportation in rural regions: volume I - inventory and analyses. Final report.

Transportation Department, Office of University Research, Washington, D.C.

Protection and functioning of the hands in cold climates;

Includes bibliographies.

Protection and functioning of the hands in cold climates /

Mode of access: Internet.