Dinoflagellate abundance and events of ODP Site 189-1172 sediments

Palynomorphs were studied in samples from Ocean Drilling Program (ODP) Leg 189, Holes 1172A and 1172D (East Tasman Plateau; 2620 m water depth). Besides organic walled dinoflagellate cysts (dinocysts), broad categories of other palynomorphs were quantified in terms of relative abundance. In this contribution, we provide an overview of the dinocyst distribution from the Maastrichtian to lowermost Oligocene and Quaternary intervals and illustrate main trends in palynomorph distribution. The uppermost Cretaceous-lowermost Oligocene succession of Site 1172 has a confident biomagnetostratigraphy, enabling us to tie early Paleogene Southern Hemisphere dinocyst events to the geomagnetic polarity timescale for the first time. Dinocyst species from the Maastrichtian to earliest Oligocene at Site 1172 are largely endemic ("Transantarctic Flora") or bipolar; cosmopolitan taxa are present in the background as well. The Maastrichtian-early late Eocene dinocyst assemblages are indicative of shallow-marine to restricted marine, pro-deltaic conditions, closely tied to a massive siliciclastic sequence. By middle late Eocene times (~35.5 Ma), the siliciclastic sequence gave way to a thin glauconitic unit, considered to reflect the deepening of the Tasmanian Gateway. This transition coincides with the most prominent change in dinocyst associations of the Paleogene. The turnover is inferred to reflect a change from marginal marine to more offshore conditions, with increased winnowing and oxidation. Overlying pelagic carbonate ooze of middle early Oligocene and younger age is virtually barren of organic microfossils, although Quaternary assemblages have been recovered. This aspect is taken to reflect average low sedimentation rates and well-oxygenated water masses during most of the Oligocene and Neogene. The few palynologically productive samples from the Oligocene-Quaternary interval have a stronger cosmopolitan to subtropical signature, with warm-water species being common to abundant.

Migration and Wellbeing at the Lower Echelons of the Economy: A Study of Delhi Slums

This paper based on a primary survey of households (2004-05) in the slum clusters of Delhi examines whether migrants are likely to experience upward mobility in their place of destination or alternatively, if they merely transfer their poverty from rural areas to large cities. First, a simple bifurcation of population in terms of poor and non-poor sub-groups is examined along with the incidence of poverty across different categories of occupations and non-workers. Then, an explanation of the variations in per capita expenditure across households is provided, and a binomial logit model (poor/non-poor) is developed identifying the variables which raise (or reduce) the probability of being non-poor (or poor). Next, an estimate of the wellbeing (deprivation) index is derived from factor analysis of a large number of variables including demographic and economic aspects of households. Empirical findings suggest that while duration of migration and the wellbeing index do not have a definite relationship, migrant households who have been in the city for a very long time have a higher wellbeing index on average than those who migrated in the last ten years. This tends to support the view that migrants do not merely transfer rural poverty to urban areas, and further that population mobility yields improvement in the living standard, if only in the very long term. Implementation of "employment-cum-shelter" support schemes in the urban areas may contribute to their wellbeing.

Evaluation of the influence of toll systems on energy consumption and CO2 emissions: A case study of a Spanish highway

This paper studies the energy consumption and subsequent CO2 emissions of road highway transportation under three toll systems in Spain for four categories of vehicles: cars, vans, buses and articulated trucks. The influence of toll systems is tested for a section of AP-41 highway between Toledo and Madrid. One system is free flow, other is traditional stop and go and the last toll system operates with an electronic toll collection (ETC) technology. Energy consumption and CO2 emissions were found to be closely related to vehicle mass, wind exposure, engine efficiency and acceleration rate. These parameters affect, directly or indirectly, the external forces which determine the energy consumption. Reducing the magnitude of these forces through an appropriate toll management is an important way of improving the energy performance of vehicles. The type of toll system used can have a major influence on the energy efficiency of highway transportation and therefore it is necessary to consider free flow.

Structure Variation And Dynamics of the Nuclear Ribosomal Intergenic Spacer Region in Key Gibberella Fujikuroi Complex Species

The intergenic spacer (IGS) region of the ribosomal DNA was cloned and sequenced in eight species within the Gibberella fujikuroi species complex with anamorphs in the genus Fusarium , a group that includes the most relevant toxigenic species. DNA sequence analyses revealed two categories of repeated elements: long repeats and short repeats of 125 and 8 bp, respectively. Long repeats were present in two copies and were conserved in all the species analyzed, whereas different numbers of short repeat elements were observed, leading to species-specific IGS sequences with different length. In Fusarium subglutinans and Fusarium nygamai , these differences seemed to be the result of duplication and deletion events. Here, we propose a model based on unequal crossing over that can explain these processes. The partial IGS sequence of 22 Fusarium proliferatum isolates was also obtained to study variation at the intraspecific level. The results revealed no differences in terms of number or pattern of repeated elements and detected frequent gene conversion events. These results suggest that the homogenization observed at the intraspecific level might not be achieved primarily by unequal crossing-over events but rather by processes associated with recombination such as gene conversion events.

The analysis of the basketball coach speech during the moments of game and pause in relation to the performance in competition

In the area of the professional competition, the coach is a fundamental part in the management of a team and more concretely in the game planning. During the competition, the management of the times of pause and times out as well as the conduct of the coach during the same ones is an aspect to analyze in the sports performance. It is for this that it becomes necessary to know some of the behaviors that turn out to be more frequent by the coach and that are more related to a positive performance of his players. For it there has been realized a study of 7 cases of expert coaches in those that his verbal behavior has observed during 4 games. It has focused on the content of the information only to verbal level, on his meaning. The information that have been obtained in the study shows a major quantity of information elaborated during the pauses of the games and a major tactical content with regard to the moments of game. On the other hand, a relation exists between a major number of questions and a minor number of psychological instructions when the score is adverse, whereas in case of victory, a direct relation does not exist with any category. The rest of categories of the speech do not meet influenced directly for the result, for what it is not possible to consider a direct and immediate relation between the coach verbal behavior during the pauses and the result of the game, except in punctual moments.

Assessing construction and demolition waste on masonry works to avoid future generation

The difficulty of dealing with construction and demolition waste (CDW) on construction sites is not new and continues to be a significant environmental problem. Currently the CDW collection system in Spain is done in a decentralized manner by each sub-contracted company, being necessary to implement effective waste management measures ensuring a correct management and minimization. During the last years several measures have been launched in order to improve and encourage the reuse and recycling of CDW. A widespread solution for CDW recovery is using them as a landscaping aggregate or for road bases and sub-bases. However, measures encouraging onsite prevention still need to be enhanced. This paper studies the major work stage generating CDW and analyses the categories of CDW produced during its execution. For this, several real building sites have been analysed in order to quantify the estimation of CDW generated. Results of this study show that a significant contributor to the CDW generation on building construction sites in Spain are the masonry works. Finally, a Best Practices Manual (BPM) is proposed containing several strategies on masonry works aimed not only at CDW prevention, but also at improving their management and minimization. The use of this BPM together with the Study and Plan of CDW management --required by law--, promotes the environmental management of the company, favouring the cohesion of the construction process organization at all stages giving rise to establishing responsibilities in the field of waste and providing a greater control over the process. Keywords: construction and demolition waste, management, masonry works, good practice measures, prevention.

A survey of feature selection in Internet traffic characterization

In the last decade, the research community has focused on new classification methods that rely on statistical characteristics of Internet traffic, instead of pre-viously popular port-number-based or payload-based methods, which are under even bigger constrictions. Some research works based on statistical characteristics generated large fea-ture sets of Internet traffic; however, nowadays it?s impossible to handle hun-dreds of features in big data scenarios, only leading to unacceptable processing time and misleading classification results due to redundant and correlative data. As a consequence, a feature selection procedure is essential in the process of Internet traffic characterization. In this paper a survey of feature selection methods is presented: feature selection frameworks are introduced, and differ-ent categories of methods are briefly explained and compared; several proposals on feature selection in Internet traffic characterization are shown; finally, future application of feature selection to a concrete project is proposed.

Considering cycling for commuting : the role of mode familiarity : an exploration on the (circular) relation between cycling behaviours and attitudes toward cycling in Vitoria-Gasteiz, Spain

¿La gente utiliza la bicicleta porque les gusta? ¿O es el propio hecho de usarla la razón por la que les gusta hacerlo? ¿O es una combinación de las dos? Este tipo de preguntas reflejan un problema que se puede llamar ‘el círculo de la consideración de la bicicleta’: para poder considerar el uso de la bicicleta en el conjunto de posibles opciones a escoger, un individuo tiene que tener creencias positivas sobre ella, sobre todo en el caso de ‘contextos de bajo uso’. Pero parece poco probable que se formen creencias positivas cuando hay bajos niveles de familiaridad al modo, es decir, con un bajo conocimiento de sus características, su funcionamiento y del imaginario asociado; al mismo tiempo, la familiaridad irá alcanzando niveles más altos conforme aumente el tiempo y la intensidad con la que se utilice la bicicleta a lo largo de la vida de los individuos. El problema parece un circulo recursivo huevo-gallina, ya que es difícil que alguien considere el usar la bicicleta en lugares donde su uso es una práctica poco extendida. En estos lugares, y dentro del conglomerado actual de tecnologías, infraestructuras, reglas, prácticas de los usuarios y preferencias culturales que se han desarrollado alrededor del automóvil (el actual "sistema socio-técnico de la movilidad urbana", Urry 2004; Geels 2005, 2012) usar la bicicleta es considerado por la mayoría como algo difícil, inseguro, y anormal. Como consecuencia, los procesos de aumento de familiaridad con la bicicleta permanecen inactivos. La tesis asume la familiaridad como una fuente de información e influencia sobre las creencias positivas sobre la bicicleta. En ‘contextos de bajo uso’, sin familiaridad al uso de la bicicleta, estas creencias sólo pueden surgir de ciertos rasgos personales (afecto, valores, identidades, voluntad, etc.). Tal como han evidenciado investigaciones recientes, en estos contextos la posibilidad de considerar el uso de la bicicleta (y su eventual adopción), se circunscribe principalmente a los ‘entusiastas’, a los que están dispuestos a “ir contra corriente” (Horton & Parkin 2012), limitando el alcance de las políticas de promoción. La investigación llevada a cabo en esta tesis ofrece un nuevo enfoque al problema del ‘círculo de la consideración de la bicicleta’. Para ello, plantea un modelo en el que se introduce a la familiaridad como un constructo que media entre el comportamiento final –qué modo de transporte elige el individuo– y el conjunto de constructos psicosociales que preceden la elección modal (creencias y actitudes). La familiaridad al uso de la bicicleta se concibe como una medida de la intensidad relativa del uso de una bicicleta, real y percibida (basándose en Diana & Mokhtarian 2009) que puede formarse de manera distinta según sus fines (utilitarios o no utilitarios). El constructo familiaridad con el modo bicicleta está relacionado con la cantidad de tiempo, la intensidad y la regularidad con la que un individuo ha hecho uso de la bicicleta a lo largo de su vida. La familiaridad se concibe así como una condición que permite definir adecuadamente el contexto en el que se toman las decisiones modales de los individuos, en línea con investigaciones que postulan patrones de causalidad alternativos entre los procesos cognitivos de elección y los comportamientos modales (Tardif 1977; Dobson et al. 1978; Golob et al. 1979; Golob 2001; Schwanen et al. 2012; Diana et al. 2009; Vij & Walker 2014). De este modo se plantea que el esquema unidireccional actitudesconductas podría no ser completamente valido en el caso de la consideración de la bicicleta, explorando la hipótesis que sean las propias conductas a influenciar la formación de las actitudes. En esta tesis, el constructo de familiaridad se articula teórica y metodológicamente, y se emplea un instrumento de diseño transversal para contrastarlo. Los resultados de una encuesta telefónica a una muestra representativa de 736 personas en la ciudad española de Vitoria-Gasteiz proveen evidencias que sugieren –aunque de forma preliminar– que la familiaridad juega un papel de mediadora en la relación entre la utilización de la bicicleta y la formación de las creencias y actitudes hacia el su uso. La tesis emplea mediciones para cada individuo con respecto tanto a su consideración como a su familiaridad al uso de la bicicleta. Éstas mediciones se definen haciendo uso del análisis factorial exploratorio (AFE). Por un lado, el AFE arroja una estructura del constructo ‘consideración’ formada por cuatro factores, tres de ellos asociados con elementos positivos y uno con elementos negativos: (1) de cómo el uso de la bicicleta se considera verde e inteligente (G&S); (2) sobre su carácter agradable y adecuado (P&S); (3) sobre su eficacia como modo de transporte para ir al trabajo (E); y (4) sobre los principales inconvenientes de su uso, es decir, las dificultades implícitas (sudoración y estar expuestos a las inclemencias del tiempo) y la sensación de inseguridad que genera (sentirse en riesgo de accidentes y estresarse por el tráfico) (D&T). Por otro lado, la familiaridad al uso de la bicicleta se mide en dos distintas variables ordinales (según se base en el uso utilitario o no utilitario). Como resultado, se puede hablar de que cada individuo se encuentra en una de las siguientes cuatro etapas en orden creciente hacia una familiaridad completa al modo: no familiarizados; apenas familiarizados; moderadamente familiarizados; totalmente familiarizados. El análisis de los datos de los cuatro grupos de sujetos de la muestra, –definidos de acuerdo con cada una de las cuatro etapas de familiaridad definidas– ha evidenciado la existencia de diferencias intergrupo estadísticamente significativas, especialmente para la medida relacionada con el uso utilitario. Asimismo, las personas en los niveles inferiores de familiaridad tienen una consideración menor de los aspectos positivos de la bicicleta y por el contrario presentan preocupaciones mayores hacia las características negativas respecto a aquellas personas que están más familiarizados en el uso utilitario. El uso, aunque esporádico, de una bicicleta para fines utilitarios (ir de compras, hacer recados, etc.), a diferencia de no usarla en absoluto, aparece asociado a unas puntuaciones significativamente más altas en los tres factores positivos (G&S, E, P&S), mientras que parece estar asociado a puntuaciones significativamente más bajas en el factor relacionado con las características negativas (D&U). Aparecen resultados similares cuando se compara un uso moderado, con uno esporádico, sobre todo con respecto a la consideración de las características negativas. Los resultados de esta tesis están en línea con la literatura anterior que se ha basado en variables similares (por ejemplo, de Geus et al. 2008; Stinson & Bhat 2003, 2004; Hunt & Abraham 2006; y van Bekkum et al. 2011a, entre otros), pero en este estudio las diferencias se observan en un contexto de bajo uso y se derivan de un análisis de toda la población de personas que se desplazan a su lugar de trabajo o estudio, lo cual eleva la fiabilidad de los resultados. La posibilidad de que unos niveles más altos de uso de la bicicleta para fines utilitarios puedan llevar a niveles más positivos de su consideración abre el camino a implicaciones teóricas y de políticas que se discuten en la tesis. Con estos resultados se argumenta que el enfoque convencional basado en el cambio de actitudes puede no ser el único y prioritario para lograr cambios a la hora de fomentar el uso de la bicicleta. Los resultados apuntan al potencial de otros esquemas de causalidad, basados en patrones de influencia más descentrados y distribuidos, y que adopten una mirada más positiva hacia los hábitos de transporte, conceptualizándolos como “inteligencia encarnada y pre-reflexiva” (Schwanen et al. 2012). Tales esquemas conducen a un enfoque más práctico para la promoción del uso de la bicicleta, con estrategias que podrían basarse en acciones de ‘degustación’ de su uso o de mayor ‘exposición’ a su uso. Is the fact that people like cycling the reason for them to cycle? Or is the fact that they do cycle the reason for them to like cycling? Or is a combination of the two? This kind of questions reflect a problem that can be called ‘the cycle of cycling consideration’: in order to consider cycling in the set of possible options to be chosen, an individual needs to have positive beliefs about it, especially in the case of ‘low-cycling contexts’. However, positive beliefs seem unlikely to be formed with low levels of mode familiarity, say, with a low acquaintance with mode features, functioning and images; at the same time, higher levels of familiarity are likely to be reached if cycling is practised over relative threshold levels of intensities and extensively across individual life courses. The problem looks like a chicken-egg recursive cycle, since the latter condition is hardly met in places where cycling is little practised. In fact, inside the current conglomerate of technologies, infrastructures, regulations, user practices, cultural preferences that have grown around the automobile (the current “socio-technical system of urban mobility”, Urry 2004; Geels 2005, 2012) cycling is commonly considered as difficult, unsafe, and abnormal. Consequently, the processes of familiarity forming remain disabled, and, as a result, beliefs cannot rely on mode familiarity as a source of information and influence. Without cycling familiarity, origins of positive beliefs are supposed to rely only on personal traits (affect, values, identities, willingness, etc.), which, in low-cycling contexts, confine the possibility of cycling consideration (and eventual adoption) mainly to ‘cycling enthusiasts’ who are willing to “go against the grain” (Horton & Parkin 2012), as it results from previous research. New research conducted by author provides theoretical insights for a different approach of the cycling consideration problem in which the presence of the new construct of cycling familiarity is hypothesised in the relationship between mode choice behaviour and the set of psychosocial constructs that are supposed to precede it (beliefs and attitudes). Cycling familiarity is conceived as a measure of the real and the perceived relative intensity of use of a bicycle (building upon Diana & Mokhtarian 2009) which may be differently formed for utilitarian or non-utilitarian purposes. The construct is assumed to be related to the amount of time, the intensity and the regularity an individual spends in using a bicycle for the two distinct categories of purposes, gaining in this way a certain level of acquaintance with the mode. Familiarity with a mode of transport is conceived as an enabling condition to properly define the decision-making context in which individual travel mode choices are taken, in line with rather disperse research efforts postulating inverse relationships between mode behaviours and mode choices (Tardiff 1977; Dobson et al. 1978; Golob et al. 1979; Golob 2001; Schwanen et al. 2012; Diana et al. 2009; Vij & Walker 2014). The new construct is built theoretically and methodologically, and a cross-sectional design instrument is employed. Results from a telephone survey in a representative sample of 736 commuters in the Spanish city of Vitoria-Gasteiz, provide suggestive –although preliminary– evidence on the role of mode familiarity as a mediator in the relationship between cycling use and the formation of beliefs and attitudes toward cycling. Measures of both cycling consideration and cycling familiarity are defined making use of exploratory factor analysis. On the one hand, four distinct cycling consideration measures are created, based on attitude expressions on four underlying factors relating to the cycling commuting behaviour: on how cycling commuting is considered green and smart (G&S); on its pleasant and suited character (P&S); on its efficiency as a mode of transport for commuting (E); and on the main drawbacks of its use, namely the difficulties implied (sweating and being exposed to adverse weather conditions) and the sense of unsafety it generates (feeling at risk of accidents and getting stressed by traffic) (D&U). On the other hand, dimensions of cycling familiarity are measured on two distinct ordinal variables (whether based on the utilitarian or non-utilitarian use) comprising four stages to a complete mode familiarity: not familiar; barely familiar; moderately familiar; fully familiar. For each of the four stages of cycling familiarity defined, statistical significant differences are found, especially for the measure related to the utilitarian use. Consistently, people at the lower levels of cycling familiarity have a lower consideration of the positive aspects of cycling and conversely they exhibit higher concerns towards the negative characteristics than those individuals that are more familiar in utilitarian cycling. Using a bicycle occasionally for practical purposes, as opposed to not using it at all, seems associated to significant higher scores in the three positive factors (G&S, E, P&S) while it appears to be associated to significant lower scores in the factor relating with the negative characteristics of cycling commuting (D&U). A same pattern also occurs with a moderate use, as opposed to an occasional one, especially for the consideration of the negative characteristics. The results are in line with previous literature based on similar variables (e.g. de Geus et al. 2008; Stinson & Bhat 2003, 2004; Hunt & Abraham 2006; and van Bekkum et al. 2011a, among others), but in this study the differences are observed in a low-cycling context and derive from an analysis of the entire population of commuters, which rises the reliability of results.

New systems of management to improve the health and welfare of rabbits in farm conditions = Nuevos sistemas de cría y manejo para mejorar la salud y bienestar de conejos de granja

El objetivo general de esta Tesis Doctoral fue evaluar nuevos sistemas de alojamiento y cría de conejos de granja, estudiando tanto parámetros comportamentales (experimento 1) como productivos y reproductivos (experimento 3). Además, se evaluaron diferentes técnicas de muestreo con el fin de optimizar el tiempo empleado para el estudio del comportamiento animal (experimento 2). En el experimento 1, se estudió el comportamiento de conejas alojadas en dos tipos de jaulas (TJ), convencionales vs. alternativas con una plataforma elevada, en distintos estados fisiológicos (EF), lactantes y gestantes. Se observó el comportamiento de 12 conejas reproductoras con grabaciones de una duración de 24 h continuas. Independientemente del EF y TJ, las conejas pasaron gran parte de su tiempo sobre el reposapatas (57,7 %, de media). Sin embargo, debido al uso de la plataforma (23,0% del tiempo, de media), las conejas lactantes permanecieron un 36,6 % menos de tiempo (P<0,001) sobre el reposapatas y las gestantes un 27,0% menos (P<0,001) sobre el enrejillado en jaulas alternativas que en convencionales. En las jaulas alternativas, las conejas podían adoptar la postura “levantada”, sin embargo ésta fue observada solamente en conejas gestantes una media de 4,6 veces al día. Las conejas bebieron con mas frecuencia en jaulas convencionales que en alternativas (24,6 vs 19,1 veces al día; P<0,05). Se observó una mayor duración y frecuencia del comportamiento “interactuando con compañeras” en conejas gestantes alojadas en jaulas convencionales (276 s/d y 4,6 veces/d; P<0,05). La frecuencia de “interactuando con gazapos” fue menor en jaulas alternativas que en convencionales (2,4 vs 8,6 veces al día; P<0,01). La hora del día afectó al comportamiento de las conejas, teniendo un comportamiento menos activo durante las horas centrales del día. Durante las horas de oscuridad, las conejas estuvieron más inquietas realizando comportamientos como ‘encabritarse’ o amamantar, coincidiendo éstos en el tiempo en el cual las conejas pasaron más tiempo en la plataforma. Las conejas utilizaron frecuentemente la plataforma, independientemente del estado fisiológico. En la fase de lactación, las conejas utilizaron la plataforma para huir de los intentos de mamar por parte de los gazapos cuando éstas no estaban receptivas. El uso de la plataforma puede dar lugar a problemas higiénicos debidos tanto por la acumulación de heces sobre ella como por la caída de heces y orina sobre los animales que están en la parte inferior. La ausencia de estereotipias por parte de las conejas tanto en jaulas alternativas como en convencionales no sugiere una falta de bienestar debida al sistema de alojamiento. En el experimento 2, se compararon distintos métodos de observación simplificada con respecto un método de referencia usando grabaciones continuas de 24 h para la evaluación del comportamiento de conejas en distintos estados fisiológicos (gestantes y lactantes) alojadas en dos tipos de jaulas (convencionales y alternativas). Se analizaron un total de 576 h de grabaciones continuas de 24 h en 12 conejas reproductoras al final del periodo de lactación y en las mismas conejas después del destete. Los comportamientos observados se clasificaron en tres categorías independientes (localización en la jaula, postura y comportamientos funcionales). Se utilizaron grabaciones continuas de 24 h como método de referencia para validar otros cuatro métodos de observación simplificados, utilizando grabaciones de distinta duración y frecuencia a lo largo del día. Métodos regulares: corto y largo con 2.4 y 8 h de observación respectivamente, y métodos irregulares: corto y largo con 6 y 8 h de observación, respectivamente. Como resultado, se observó que independientemente del sistema de alojamiento, el mejor método para reducir el tiempo de observación necesario para evaluar el comportamiento de conejas reproductoras depende del tipo de variable a estudiar y del estado fisiológico de las conejas. En gestantes, los métodos irregulares no fueron adecuados para estimar comportamientos de larga duración tales como tumbada, sentada, descansando y acicalándose. Sin embargo, en ambos estados fisiológicos, los métodos regulares fueron precisos para los comportamientos de los grupos localización y postura y para comportamientos funcionales de larga duración. Por otro lado, los coeficientes de variación de los comportamientos poco frecuentes realizados principalmente durante el periodo de oscuridad fueron muy altos, y el método irregular largo obtuvo los menores errores de estimación para éstos comportamientos. En el experimento 3, se estudió el efecto de un uso combinado de lactaciones largas (hasta 46 días) con jaulas alternativas sobre los parámetros productivos y reproductivos de 104 conejas y sus camadas durante cinco ciclos reproductivos. La mitad de las conejas fueron alojadas en jaulas polivalentes convencionales (39 cm x 100 cm x 30 cm) y la otra mitad en jaulas polivalentes alternativas (39 cm x 100 cm x 60 cm), con una plataforma elevada. Dentro de cada grupo de alojamiento, la mitad de las conejas se destetaron a 32 días y la otra mitad a 46 días tras el parto. Las lactaciones más largas afectaron negativamente al peso (P<0,001), contenido en grasa y energía (P<0,05) de las conejas al final del periodo de lactación, pero éste efecto disminuyó con el número de partos. La fertilidad, prolificidad y la mortalidad de las conejas no fue afectada por la duración de la lactación. El destete tardío dio lugar a un mayor tamaño y peso de la camada al final del periodo de crecimiento (8,9 y 11,3 %, respectivamente) y a un menor índice de conversión por jaula durante el todo el periodo experimental (13,5 %) con respecto al destete convencional (P<0,001). Éstos resultados fueron paralelos a la menor mortalidad global (12,6 vs 17,6 %; P<0,05) observada en gazapos con destete tardío. Las diferencias en los parámetros productivos con las distintas edades al destete sólo fueron observadas en los ciclos con peor estado sanitario (tercer y quinto ciclo), en los cuales el destete tardío redujo la mortalidad. El tipo de jaula no afectó al peso de la coneja, condición corporal, mortalidad, fertilidad ni tamaño de camada durante los cinco primeros ciclos reproductivos. Sin embargo, el peso de la camada y el índice de conversión a los 21 días de edad fueron 4,2% mayor (P<0,001) y 5,0% menor (P<0,005) en animales alojados en jaulas alternativas que en jaulas convencionales. A día 59 las jaulas alternativas dieron lugar a camadas más pesadas (P<0,01); sin embargo, éste efecto fue influenciado por la densidad alcanzada en cada ciclo, ya que cuando la densidad de los animales fue menor que 40kg/m2 (tercer y quinto ciclo), el efecto del tipo de jaula sobre el peso de la camada no fue significativo. De los resultados obtenidos se puede concluir que el uso combinado de lactaciones más largas y jaulas con mayor superficie disponible con una plataforma elevada podría ser una alternativa para mejorar el bienestar animal en determinadas situaciones productivas. ABSTRACT The general aim of this PhD Thesis was to evaluate new housing and husbandry systems of farmed rabbits, studying behavioral (experiment 1), productive and reproductive (experiment 3) parameters. Moreover, different sampling techniques were evaluated in order to optimize the assessment of rabbit behaviour (experiment 2). In experiment 1, the behaviour of rabbit does housed in two different types of cage (TC), conventional vs. alternative with an elevated platform, at different physiological stages (PS), lactation and gestation was to study. Behavioural observations were carried out on 12 commercial rabbit does using continuous 24 hour video recording. Independently of PS and TC, rabbit does spent most of their time on foot mats (57.7 %, as average). However, due to the use of platforms (23.0% of time, as average), lactating does spent 36.6% less time (P<0.001) on foot mats and gestating does spent 27.0% less (P<0.001) time on wire mesh in alternative cages than in conventional cages. Alternative cages allowed for standing posture but this behaviour was only observed in gestating does (4.6 times a day, as average). Frequency of drinking was higher in conventional than in alternative cages (24.6 vs. 19.1 times a day; P<0.05). Gestating does housed in conventional cages reached the highest duration and frequency of interacting with neighbours (276 s/d and 4.6 times/d; P<0.05). The frequency of interacting with kits was lower in alternative than in conventional cages (2.4 vs. 8.6 times a day; P<0.01). Does’ behaviour was influenced by hour of day, being less active at the midday hours. During dark hours rabbit does more frequently performed restless behaviour such as hyperactivity or nursing, matching the time at which rabbit does spent more time on the platform. The platform was frequently used by rabbit does, independent of their physiological state, and during late lactation phase, when mothers were not receptive to nursing, does housed in alternative cages used the platform as a mean to flee from kids trying to suckle. The use of the platform might lead to hygienic problems due to retained faeces on the platform and faeces and urine falling onto animals located in the lower part of the cage. Stereotypies were not observed in any housing system, therefore conventional cages do not suggest lack of animal welfare. In experiment 2, it was compared the results of different simplified sampling methods of behavioural data with respect to reference records of 24-h in order to assess rabbit does behaviours at different physiological stages (gestation and lactation) in animals housed in two types of cages (conventional and alternative). A total of 576 h of continuous video of 12 rabbit does at the end of lactation and on the same females after weaning were analysed. The behavioural observations were studied using three independent categories of classification (location in the cage, posture and functional behaviours). Continuous behavioural recordings of 24 h were considered as the reference method to validate another 4 sampling methods of data collection by aggregated video recordings of different frequency and duration (regular short and long methods with 2.4 and 8 h of observation respectively, and irregular short and long methods with 6 and 8 h of observation, respectively). The current results showed that, independently of housing system, the best method to reduce the total observation time required to assess rabbit does behaviour depends on the trait studied and physiological stage of does. In gestating does, irregular methods were not suitable to estimate behaviours of long duration such as lying, sitting, resting and grooming. However, in both physiological stages, regular methods were accurate for location behaviours, postures and functional behaviours of long duration. Instead, for the study of infrequent behaviours performed mainly during dark period, where coefficients of variation were high, the irregular long method led to the lowest mean estimation errors. In experiment 3, the effects of the combined use of long lactation periods (46 days) with alternative cages on the reproductive and growth performance of 104 rabbit does and their litters during five consecutive reproductive cycles were studied. Half of does were housed in conventional polyvalent cages (39 cm x 100 cm x 30 cm) and the other half in alternative polyvalent cages (39 cm x 100 cm x 60 cm), with a raised platform. Half of the rabbit does in each type of cages were weaned at 32 and the other half at 46 days after parturition. Longer lactations affected negatively to body weight (P<0.001), fat and energy content (P<0.05) of rabbit does at the end of the lactation period, but this effect decreased with the number of parturitions. Fertility, prolificacy and doe mortality were not affected by lactation length. Late weaning led to higher litter size (by 8.9 %) and litter weight (by 11.3 %) at the end of growing period and lower feed conversion ratio per cage during the overall experimental period (13.5 %) than standard weaning (P<0.001). These results were parallels to a lower mortality (12.6 vs 17.6 %; P<0.05) of young rabbit weaned later during the overall experimental period. Differences in performances at different weaning ages were only observed during cycles with worst health status (third and fifth cycles) in which late weaning decreased mortality. Type of cage did not affect doe body weight and body condition, mortality, fertility, prolificacy and litter size during the five firsts reproductive cycles. Nevertheless, at day 21 litter weight and feed conversion ratio were 4.2 % higher (P<0.001) and 5.0 % lower (P<0.005) in animals housed in alternative than in conventional cages. Alternative cages also led to heavier litters at 59 days (P<0.01); however, this effect was influenced by density reached in each cycle, as when the density of animals was lower than 40 kg/m2 (cycles three and five), the difference of litter weight between alternative and conventional cages was not significant. From the results obtained it can be concluded that the combined use of longer lactations and cages with higher available surface with a raised platform could be an alternative to improve animal welfare in some productive situations.

Incomplete penetrance of familial retinoblastoma linked to germ-line mutations that result in partial loss of RB function

To study the molecular basis for the clinical phenotype of incomplete penetrance of familial retinoblastoma, we have examined the functional properties of three RB mutations identified in the germ line of five different families with low penetrance. RB mutants isolated from common adult cancers and from classic familial retinoblastoma (designated as classic RB mutations) are unstable and generally do not localize to the nucleus, do not undergo cyclin-dependent kinase (cdk)-mediated hyperphosphorylation, show absent protein “pocket” binding activity, and do not suppress colony growth of RB(−) cells. In contrast, two low-penetrant alleles (661W and “deletion of codon 480”) retained the ability to localize to the nucleus, showed normal cdk-mediated hyperphosphorylation in vivo, exhibited a binding pattern to simian virus 40 large T antigen using a quantitative yeast two-hybrid assay that was intermediate between classic mutants (null) and wild-type RB, and had absent E2F1 binding in vitro. A third, low-penetrant allele, “deletion of RB exon 4,” showed minimal hyperphosphorylation in vivo but demonstrated detectable E2F1 binding in vitro. In addition, each low-penetrant RB mutant retained the ability to suppress colony growth of RB(−) tumor cells. These findings suggest two categories of mutant, low-penetrant RB alleles. Class 1 alleles correspond to promoter mutations, which are believed to result in reduced or deregulated levels of wild-type RB protein, whereas class 2 alleles result in mutant proteins that retain partial activity. Characterization of the different subtypes of class 2 low-penetrant genes may help to define more precisely functional domains within the RB product required for tumor suppression.

Crystal structure of the ribosomal RNA domain essential for binding elongation factors

The structure of a 29-nucleotide RNA containing the sarcin/ricin loop (SRL) of rat 28 S rRNA has been determined at 2.1 Å resolution. Recognition of the SRL by elongation factors and by the ribotoxins, sarcin and ricin, requires a nearly universal dodecamer sequence that folds into a G-bulged cross-strand A stack and a GAGA tetraloop. The juxtaposition of these two motifs forms a distorted hairpin structure that allows direct recognition of bases in both grooves as well as recognition of nonhelical backbone geometry and two 5′-unstacked purines. Comparisons with other RNA crystal structures establish the cross-strand A stack and the GNRA tetraloop as defined and modular RNA structural elements. The conserved region at the top is connected to the base of the domain by a region presumed to be flexible because of the sparsity of stabilizing contacts. Although the conformation of the SRL RNA previously determined by NMR spectroscopy is similar to the structure determined by x-ray crystallography, significant differences are observed in the “flexible” region and to a lesser extent in the G-bulged cross-strand A stack.

Complete genome sequence of an M1 strain of Streptococcus pyogenes

The 1,852,442-bp sequence of an M1 strain of Streptococcus pyogenes, a Gram-positive pathogen, has been determined and contains 1,752 predicted protein-encoding genes. Approximately one-third of these genes have no identifiable function, with the remainder falling into previously characterized categories of known microbial function. Consistent with the observation that S. pyogenes is responsible for a wider variety of human disease than any other bacterial species, more than 40 putative virulence-associated genes have been identified. Additional genes have been identified that encode proteins likely associated with microbial “molecular mimicry” of host characteristics and involved in rheumatic fever or acute glomerulonephritis. The complete or partial sequence of four different bacteriophage genomes is also present, with each containing genes for one or more previously undiscovered superantigen-like proteins. These prophage-associated genes encode at least six potential virulence factors, emphasizing the importance of bacteriophages in horizontal gene transfer and a possible mechanism for generating new strains with increased pathogenic potential.

Allostatic load as a marker of cumulative biological risk: MacArthur studies of successful aging

Allostatic load (AL) has been proposed as a new conceptualization of cumulative biological burden exacted on the body through attempts to adapt to life's demands. Using a multisystem summary measure of AL, we evaluated its capacity to predict four categories of health outcomes, 7 years after a baseline survey of 1,189 men and women age 70–79. Higher baseline AL scores were associated with significantly increased risk for 7-year mortality as well as declines in cognitive and physical functioning and were marginally associated with incident cardiovascular disease events, independent of standard socio-demographic characteristics and baseline health status. The summary AL measure was based on 10 parameters of biological functioning, four of which are primary mediators in the cascade from perceived challenges to downstream health outcomes. Six of the components are secondary mediators reflecting primarily components of the metabolic syndrome (syndrome X). AL was a better predictor of mortality and decline in physical functioning than either the syndrome X or primary mediator components alone. The findings support the concept of AL as a measure of cumulative biological burden.

Defining the roles of individual residues in the single-stranded DNA binding site of PcrA helicase

Crystal structures and biochemical analyses of PcrA helicase provide evidence for a model for processive DNA unwinding that involves coupling of single-stranded DNA (ssDNA) tracking to a duplex destabilization activity. The DNA tracking model invokes ATP-dependent flipping of bases between several pockets on the enzyme formed by conserved aromatic amino acid residues. We have used site-directed mutagenesis to confirm the requirement of all of these residues for helicase activity. We also demonstrate that the duplex unwinding defects correlate with an inability of certain mutant proteins to translocate effectively on ssDNA. Moreover, the results define an essential triad of residues within the ssDNA binding site that comprise the ATP-driven DNA motor itself.

Environmental services of biodiversity.

Humans derive many utilitarian benefits from the environmental services of biotas and ecosystems. This is often advanced as a prime argument to support conservation of biodiversity. There is much to be said for this viewpoint, as is documented in this paper through a summary assessment of several categories of environmental services, including regulation of climate and biogeochemical cycles, hydrological functions, soil protection, crop pollination, pest control, recreation and ecotourism, and a number of miscellaneous services. It is shown that the services are indeed significant, whether in ecological or economic senses. Particularly important is the factor of ecosystem resilience, which appears to underpin many of the services. It should not be supposed, however, that environmental services stem necessarily and exclusively from biodiversity. While biodiversity often plays a key role, the services can also derive from biomass and other attributes of biotas. The paper concludes with a brief overview assessment of economic values at issue and an appraisal of the implications for conservation planning.