Nouvelles techniques de stimulation cérébrale: perspectives thérapeutiques en psychiatrie [Novel brain stimulation techniques: therapeutic perspectives in psychiatry]

Recent advances have allowed the development of new physical techniques in neurology and psychiatry, such as Transcranial Magnetic Stimulation (TMS), Vagus Nerve Stimulation (VNS), and Deep Brain Stimulation (DBS). These techniques are already recognized as therapeutic approaches in several late stage refractory neurological disorders (Parkinson's disease, tremor, epilepsy), and currently investigated in psychiatric conditions, refractory to medical treatment (obsessive-compulsive disorder, resistant major depression). In Paralell, these new techniques offer a new window to understand the neurobiology of human behavior.

Techniques de "non-fusion" en chirurgie rachidienne [Non fusion techniques in spinal surgery]

In order to prevent adjacent segment degeneration following spinal fusion new techniques are being used. Lumbar disc arthroplasty yields mid term results equivalent to those of spinal fusion. Cervical disc arthroplasty is indicated in the treatment of cervicobrachialgia with encouraging initial results. The ability of arthroplasty to prevent adjacent segment degeneration has yet to be proven. Although dynamic stabilization had not been proven effective in treating chronic low back pain, it might be useful following decompression of lumbar spinal stenosis in degenerative spondylolisthesis. Interspinal devices are useful in mild lumbar spinal stenosis but their efficacy in treating low back pain is yet to be proven. Confronted with a growing number of new technologies clinicians should remain critical while awaiting long term results.

Personnels contractuels techniques et administratifs du Centre national de la recherche scientifique . Services extérieurs. [Décrets des 28 mai 1952, 14 novembre et 7 décembre 1955 ; arrêté du 14 novembre 1955, du Ministre de l'Education nationale.]

[Code]

Study of fish swimming activity using Acoustical Doppler Velocimetry (ADV) techniques

Peer reviewed

Evaluation of acid digestion techniques to estimate chromium contents in cattle feces

The objective of this work was to evaluate the accuracy of digestion techniques using nitric and perchloric acid at the ratios of 2:1, 3:1, and 4:1 v v-1, in one- or two-step digestion, to estimate chromium contents in cattle feces, using sodium molybdate as a catalyst. Fecal standards containing known chromium contents (0, 2, 4, 6, 8, and 10 g kg-1) were produced from feces of five animals. The chromium content in cattle feces is accurately estimated using digestion techniques based on nitric and perchloric acids, at a 3:1 v v-1 ratio, in one-step digestion, with sodium molybdate as a catalyst.

Evolving techniques to evaluate ejaculatory function.

PURPOSE OF REVIEW: Recent findings in the physiology and neurobiology of ejaculation have expanded our understanding of male sexual function and have allowed the development of new instruments to investigate ejaculatory and orgasmic disorders. RECENT FINDINGS: The evidence-based definition of lifelong premature ejaculation has set a model in the evaluation and treatment outcome of sexual dysfunction. New instruments to objectively assess arousal, orgasm and the expulsion phase of ejaculation such as functional MRI, dynamic pelvic ultrasound, PET scans and validated questionnaires have lead to a better understanding of sexual dysfunction in men. Animal models, developments in neurobiology and clinical experience have transformed a purely psychoanalytical approach to ejaculatory and orgasmic function into a novel multidisciplinary, scientifically sound and evidence-based discipline of medicine. SUMMARY: Ejaculation is an integral part of normal sexual function. Ejaculatory dysfunction is common and may cause substantial disruption to the quality of a patient's life. A better understanding of the epidemiology, pathophysiology, neuroscience and genetics of ejaculatory and orgasmic function will eventually lead to the development of new, effective methods of treatment of disorders of ejaculation and orgasm in men.

The Application of 3D Reconstruction Techniques in the Analysis of Ancient Tarraco’s Urban Topography

The widespread implementation of GIS-based 3D topographical models has been a great aid in the development and testing of archaeological hypotheses. In this paper, a topographical reconstruction of the ancient city of Tarraco, the Roman capital of the Tarraconensis province, is presented. This model is based on topographical data obtained through archaeological excavations, old photographic documentation, georeferenced archive maps depicting the pre-modern city topography, modern detailed topographical maps and differential GPS measurements. The addition of the Roman urban architectural features to the model offers the possibility to test hypotheses concerning the ideological background manifested in the city shape. This is accomplished mainly through the use of 3D views from the main city accesses. These techniques ultimately demonstrate the ‘theatre-shaped’ layout of the city (to quote Vitrubius) as well as its southwest oriented architecture, whose monumental character was conceived to present a striking aspect to visitors, particularly those arriving from the sea.

Techniques de gastrostomie chez l'enfant et expérience lausannoise avec le bouton de gastrostomie à ballonnet (Mic-Key)

Résumé : Ce travail comprend deux parties : La première partie a pour but de présenter une revue des techniques de gastrostomie chez l'enfant. La gastrostomie est, par définition, un tractus fistuleux entre l'estomac et la paroi abdominale. Le but de la gastrostomie est de permettre la décompression gastrique, la nutrition entérale et l'apport médicamenteux. Les indications et contre-indications à la confection et utilisation de la gastrostomie sont détaillées dans ce travail. Historiquement, les premières gastrostomies étaient d'origine accidentelle ou infectieuse (fistule gastro-cutanée), incompatibles avec la vie. Sedillot, en 1845 décrivit la première gastrostomie chirurgicale sans cathéter, qui avait comme désavantage la présence de fuites. Depuis, les techniques se sont multipliées en évoluant vers la continence et l'utilisation de cathéters. En 1979 Gauderer décrivit pour la première fois une technique percutanée, réalisée sur un enfant âgé de 5 mois. Cette technique est appelée « Percutaneous Endoscopic Gastrostomy » (PEG). Elle a ensuite été élargie à la population adulte. Actuellement, il existe une grande multiplicité de techniques par abord « laparotomique », laparoscopique ou percutanée (endoscopique ou radiologique). Ces techniques peuvent être combinées. Toutes ces techniques nécessitent la présence intermittente ou continue d'un dispositif, qui permet le maintient de la gastrostomie ouverte et évite les fuites gastriques. Ces dispositifs sont multiples; initialement il s'agissait de cathéters rigides (bois, métal, caoutchouc). Ensuite ils ont été fabriqués en silicone, ce qui les rend plus souples et mieux tolérés par le patient. Pour éviter leur dislocation, ils possèdent un système d'amarrage intra-gastrique tel que : un champignon (Bard®), un ballonnet (Foley®, Mic-Key®), ou une forme spiralée du cathéter (« pig-tail ») et possèdent un système d'amarrage extra-gastrique (« cross-bar »). En 1982, Gauderer créa le premier dispositif à fleur de peau : le bouton de gastrostomie (BG). Actuellement, il en existe deux types : à champignon (Bard®) et à ballonnet (Mic-Key®). Il existe plusieurs types de complications liées à la technique opératoire, à la prise en charge et au matériel utilisé. Une comparaison des différentes techniques, matériaux utilisés et coûts engendrés est détaillée dans ce travail. La deuxième partie de ce travail est dédiée aux BG et plus spécifiquement au BG à ballonnet (Mic-Key®). Nous présentons les différents boutons et les techniques spécifiques. Le BG est inséré soit dans une gastrostomie préformée, soit directement lors de la confection d'une gastrostomie par laparotomie, laparoscopie ou de façon percutanée. Les complications liées au BG sont rapportées. D'autres utilisations digestives ou urologiques sont décrites. Nous présentons ensuite notre expérience avec 513 BG à ballonnet (Mic-Key®) dans une revue de 73 enfants. La pose du BG est effectuée dans une gastrostomie préformée sans recours à une anesthésie générale. La technique choisie pour la confection de la gastrostomie dépend de la pathologie de base, de l'état général du patient, de la nécessité d'une opération concomitante et du risque anesthésique. Nous apportons des précisions sur le BG telles que la dimension en fonction de l'âge, la durée de vie, et les causes qui ont amené au changement du BG. Nos résultats sont comparés à ceux de la littérature. Sur la base de notre expérience et après avoir passé en revue la littérature spécialisée, nous proposons des recommandations sur le choix de la technique et le choix du matériel. Ce travail se termine avec une réflexion sur le devenir de la gastrostomie. Si le futur consiste à améliorer et innover les techniques et les matériaux, des protocoles destinés à la standardisation des techniques, à la sélection des patients et à l'enseignement des soins devraient s'en suivre. La prise en charge de l'enfant ne se limite pas à la sélection appropriée de la technique et des matériaux, mais il s'agit avant tout d'une approche multidisciplinaire. La collaboration entre le personnel soignant, la famille et l'enfant est essentielle pour que la prise en charge soit optimale et sans risques.

Studies on integrating kinematic design method with mechanical systems simulation techniques

Theultimate goal of any research in the mechanism/kinematic/design area may be called predictive design, ie the optimisation of mechanism proportions in the design stage without requiring extensive life and wear testing. This is an ambitious goal and can be realised through development and refinement of numerical (computational) technology in order to facilitate the design analysis and optimisation of complex mechanisms, mechanical components and systems. As a part of the systematic design methodology this thesis concentrates on kinematic synthesis (kinematic design and analysis) methods in the mechanism synthesis process. The main task of kinematic design is to find all possible solutions in the form of structural parameters to accomplish the desired requirements of motion. Main formulations of kinematic design can be broadly divided to exact synthesis and approximate synthesis formulations. The exact synthesis formulation is based in solving n linear or nonlinear equations in n variables and the solutions for the problem areget by adopting closed form classical or modern algebraic solution methods or using numerical solution methods based on the polynomial continuation or homotopy. The approximate synthesis formulations is based on minimising the approximation error by direct optimisation The main drawbacks of exact synthesis formulationare: (ia) limitations of number of design specifications and (iia) failure in handling design constraints- especially inequality constraints. The main drawbacks of approximate synthesis formulations are: (ib) it is difficult to choose a proper initial linkage and (iib) it is hard to find more than one solution. Recentformulations in solving the approximate synthesis problem adopts polynomial continuation providing several solutions, but it can not handle inequality const-raints. Based on the practical design needs the mixed exact-approximate position synthesis with two exact and an unlimited number of approximate positions has also been developed. The solutions space is presented as a ground pivot map but thepole between the exact positions cannot be selected as a ground pivot. In this thesis the exact synthesis problem of planar mechanism is solved by generating all possible solutions for the optimisation process ¿ including solutions in positive dimensional solution sets - within inequality constraints of structural parameters. Through the literature research it is first shown that the algebraic and numerical solution methods ¿ used in the research area of computational kinematics ¿ are capable of solving non-parametric algebraic systems of n equations inn variables and cannot handle the singularities associated with positive-dimensional solution sets. In this thesis the problem of positive-dimensional solutionsets is solved adopting the main principles from mathematical research area of algebraic geometry in solving parametric ( in the mathematical sense that all parameter values are considered ¿ including the degenerate cases ¿ for which the system is solvable ) algebraic systems of n equations and at least n+1 variables.Adopting the developed solution method in solving the dyadic equations in direct polynomial form in two- to three-precision-points it has been algebraically proved and numerically demonstrated that the map of the ground pivots is ambiguousand that the singularities associated with positive-dimensional solution sets can be solved. The positive-dimensional solution sets associated with the poles might contain physically meaningful solutions in the form of optimal defectfree mechanisms. Traditionally the mechanism optimisation of hydraulically driven boommechanisms is done at early state of the design process. This will result in optimal component design rather than optimal system level design. Modern mechanismoptimisation at system level demands integration of kinematic design methods with mechanical system simulation techniques. In this thesis a new kinematic design method for hydraulically driven boom mechanism is developed and integrated in mechanical system simulation techniques. The developed kinematic design method is based on the combinations of two-precision-point formulation and on optimisation ( with mathematical programming techniques or adopting optimisation methods based on probability and statistics ) of substructures using calculated criteria from the system level response of multidegree-of-freedom mechanisms. Eg. by adopting the mixed exact-approximate position synthesis in direct optimisation (using mathematical programming techniques) with two exact positions and an unlimitednumber of approximate positions the drawbacks of (ia)-(iib) has been cancelled.The design principles of the developed method are based on the design-tree -approach of the mechanical systems and the design method ¿ in principle ¿ is capable of capturing the interrelationship between kinematic and dynamic synthesis simultaneously when the developed kinematic design method is integrated with the mechanical system simulation techniques.

Studies on the characterization of dental whitening process by using both hyperspectral imaging and colorimeter techniques

A beautiful smile is directly related with white teeth. Nowadays oral care has increased and developed processes for beautiful smiles. Dental bleaching is frequently used in odontology, not just for health care also for aesthetic treatment. With the possibility of teeth bleaching, now the importance is in, how white the tooth is? Because color is relate to an individual perception. In order to assets teeth correct color identification has been developed many color guides, models, spaces and analytical methods. Spite all of these useful tools the color interpretation depends on environmental factors, position of the sample in the data acquisition and most importantly the instrument sensitivity. The commons methods have proved to be useful. They are easy to handle, some are portable but they do not have a high sensitivity. The present work is based on the integration of a new analytical technique for color acquisition. High spectral Image (HSI) is able to performed image analysis with high quality and efficiency. HSI is used in many fields and we used it for color image analysis within the bleaching process. The main comparison was done with the HSI and the colorimeter through the processes of two different bleaching protocols. The results showed that HSI has higher sensitivity than the colorimeter. During the analysis the dental surface with the HSI we were able to notice surface changes. These changes were analyzed by roughness studies.