Extractants to assess zinc phytoavailability in mineral fertilizer and industrial by-products

Efficient analytical methods for the quantification of plant-available Zn contained in mineral fertilizers and industrial by-products are fundamental for the control and marketing of these inputs. In this sense, there are some doubts on the part of the scientific community as well as of the fertilizer production sector, whether the extractor requested by the government (Normative Instruction No. 28, called 2nd extractor), which is citric acid 2 % (2 % CA) (Brasil, 2007b), is effective in predicting the plant availability of Zn via mineral fertilizers and about the agronomic significance of the required minimal solubility of 60 % compared to the total content (HCl) (Brasil, 2007a). The purpose of this study was to evaluate the alternative extractors DTPA, EDTA, neutral ammonium citrate (NAC), buffer solution pH 6.0, 10 % HCl, 10 % sulfuric acid, 1 % acetic acid, water, and hot water to quantify the contents of Zn available for maize and compare them with indices of agronomic efficiency of fertilizers and industrial by-products when applied to dystrophic Clayey Red Latosol and Dystrophic Alic Red Yellow Latosol with medium texture. The rate of Zn applied to the soil was 5 mg kg-1, using the sources zinc sulfate, commercial granular zinc, ash and galvanic sludge, ash and two brass slags. Most Zn was extracted from the sources by DTPA, 10 % HCl, NAC, 1% acetic acid, and 10 % sulfuric acid. Recovery by the extractors 2 % CA, EDTA, water, and hot water was low. The agronomic efficiency index was found to be high when using galvanic sludge (238 %) and commercial granular zinc (142 %) and lower with brass slag I and II (67 and 27 %, respectively). The sources galvanizing ash and brass ash showed solubility lower than 60 % in 2 % CA, despite agronomic efficiency indices of 78 and 125 %, respectively. The low agronomic efficiency index of industrial by-products such as brass slag I and galvanizing ash can be compensated by higher doses, provided there is no restriction, as well as for all other sources, in terms of contaminant levels of arsenic, cadmium, chromium, lead, and mercury as required by law (Normative Instruction No 27/2006). The implementation of 2nd extractor 2 % CA and the requirement of minimum solubility for industrial by-products could restrict the use of alternative sources as potential Zn sources for plants.

Fornecimento de cálcio para plantas de eucalyptus saligna por meio de aplicação de resíduo industrial lama de cal

O resíduo industrial lama de cal, originado da produção de papel kraft branqueada de eucalipto, apresenta em sua composição quantidade considerável de cálcio (Ca), o que pode contribuir para reduzir o consumo de fertilizantes em plantios florestais. Com o objetivo de avaliar o efeito da lama de cal como fonte de Ca e seus efeitos sobre a disponibilidade de nutrientes e produção de matéria seca da parte aérea de plantas de eucalipto, foram conduzidos dois ensaios em vasos, em casa de vegetação, na área de pesquisa da Klabin Florestal do Paraná. Os solos utilizados foram um Neossolo Quartzarênico órtico (RQo) e um Nitossolo Vermelho eutroférrico (NV). Os tratamentos constituíram-se de duas fontes de Ca, calcário dolomítico e lama de cal, e de uma testemunha, sendo identificados como: RQo testemunha, RQo calcário e RQo lama de cal; e NV testemunha, NV calcário e NV lama de cal. O delineamento experimental utilizado foi inteiramente casualizado, com quatro repetições. Para tanto, plantas de Eucalyptus saligna foram mantidas por 126 dias em vasos. Quantificou-se a produção de matéria seca e realizaram-se as análises de folhas e dos solos, por ocasião da coleta das plantas. Os dados revelaram que tanto a adição de calcário dolomítico quanto a lama de cal promoveram o fornecimento de Ca para as plantas de eucalipto, proporcionando aumentos na produção de matéria seca. Os teores de Ca e Na nas folhas de eucalipto foram acrescidos com a adição do resíduo ao solo, em comparação com o tratamento com calcário dolomítico, enquanto os teores de N, P, K e S foram semelhantes. As plantas cultivadas nos tratamentos RQo testemunha e RQo lama de cal apresentaram teores foliares de Mg abaixo da faixa considerada adequada. A adição de lama no solo elevou o pH e as concentrações de Ca e de Na, reduziu o Al trocável e não influenciou na disponibilidade de Mg, fato que pode proporcionar deficiência de Mg às plantas, em solos com baixos níveis desse nutriente, conforme observado neste estudo.

MORM--a Petri net based model for assessing OH&S risks in industrial processes: modeling qualitative aspects.

Because of the increase in workplace automation and the diversification of industrial processes, workplaces have become more and more complex. The classical approaches used to address workplace hazard concerns, such as checklists or sequence models, are, therefore, of limited use in such complex systems. Moreover, because of the multifaceted nature of workplaces, the use of single-oriented methods, such as AEA (man oriented), FMEA (system oriented), or HAZOP (process oriented), is not satisfactory. The use of a dynamic modeling approach in order to allow multiple-oriented analyses may constitute an alternative to overcome this limitation. The qualitative modeling aspects of the MORM (man-machine occupational risk modeling) model are discussed in this article. The model, realized on an object-oriented Petri net tool (CO-OPN), has been developed to simulate and analyze industrial processes in an OH&S perspective. The industrial process is modeled as a set of interconnected subnets (state spaces), which describe its constitutive machines. Process-related factors are introduced, in an explicit way, through machine interconnections and flow properties. While man-machine interactions are modeled as triggering events for the state spaces of the machines, the CREAM cognitive behavior model is used in order to establish the relevant triggering events. In the CO-OPN formalism, the model is expressed as a set of interconnected CO-OPN objects defined over data types expressing the measure attached to the flow of entities transiting through the machines. Constraints on the measures assigned to these entities are used to determine the state changes in each machine. Interconnecting machines implies the composition of such flow and consequently the interconnection of the measure constraints. This is reflected by the construction of constraint enrichment hierarchies, which can be used for simulation and analysis optimization in a clear mathematical framework. The use of Petri nets to perform multiple-oriented analysis opens perspectives in the field of industrial risk management. It may significantly reduce the duration of the assessment process. But, most of all, it opens perspectives in the field of risk comparisons and integrated risk management. Moreover, because of the generic nature of the model and tool used, the same concepts and patterns may be used to model a wide range of systems and application fields.

PEASANT AND SCIENTIFIC KNOWLEDGE ON PLANOSOLS AS A SOURCE OF MATERIALS IN THE MAKING OF NON-INDUSTRIAL POTTERY

Ethnopedological studies have mainly focused on agricultural land uses and associated practices. Nevertheless, peasant and indigenous populations use soil and land resources for a number of additional purposes, including pottery. In the present study, we describe and analyze folk knowledge related to the use of soils in non-industrial pottery making by peasant potters, in the municipality of Altinho, Pernambuco State, semiarid region at Brazil. Ethnoscientific techniques were used to record local knowledge, with an emphasis on describing the soil materials recognized by the potters, the properties they used to identify those soil materials, and the criteria employed by them to differentiate and relate such materials. The potters recognized three categories of soil materials: “terra” (earth), “barro” (clay) and, “piçarro” (soft rock). The multi-layered arrangement of these materials within the soil profiles was similar to the arrangement of the soil horizon described by formal pedologists. “Barro vermelho” (red clay) was considered by potters as the principal ceramic resource. The potters followed morphological and utilitarian criteria in distinguishing the different soil materials. Soils from all of these sites were sodium-affected Alfisols and correspond to Typic Albaqualf and Typic Natraqualf in the Soil Taxonomy (Soil Survey Staff, 2010).

ALTERAÇÕES ELETROQUÍMICAS E DINÂMICA DE NUTRIENTES NA SOLUÇÃO DO SOLO EM ARROZ IRRIGADO COM LIXIVIADO INDUSTRIAL TRATADO

A utilização de efluentes industriais tratados na irrigação do arroz por alagamento pode provocar alterações eletroquímicas e aumentar o teor de nutrientes na solução do solo. Para testar essa hipótese, este trabalho teve por objetivo avaliar a dinâmica dos atributos químicos e eletroquímicos da solução do solo sob cultivo de arroz irrigado com lixiviado industrial tratado, contendo 820 mg L-1 de Na. O experimento foi conduzido em casa de vegetação, utilizando-se como unidades experimentais vasos preenchidos com 20 kg de solo, em delineamento experimental em blocos casualizados, com três repetições. Os tratamentos foram: controle (irrigação com água destilada) e quatro proporções do lixiviado (25, 50, 75 e 100 %). As coletas de solução do solo foram feitas semanalmente a partir do quarto dia após o início do alagamento (DAA) até 84 DAA. A solução do solo foi amostrada na profundidade de 10 cm e analisada para os principais nutrientes e o Na, bem como para a demanda bioquímica de oxigênio (DBO5), relação de adsorção de sódio (RAS), condutividade elétrica (CE) e potencial redox (EH). A irrigação com o lixiviado aumentou os teores de K, Ca, Mg, S, P, N-NH+4, N-NO−3 e Na, assim como os valores de RAS e CE, para valores considerados prejudiciais para as plantas. Foi observada diminuição do potencial redox na solução do solo pela irrigação com lixiviado industrial tratado. Os teores de DBO5 e o N-NH+4 diminuíram com o tempo de alagamento. Em proporções menores que 25 %, o lixiviado industrial tratado pode aumentar os teores de nutrientes em solução sem causar interferência do Na para as plantas.

PHYTOAVAILABILITY OF COPPER IN INDUSTRIAL BY-PRODUCTS AND MINERAL FERTILIZERS

Alternative copper (Cu) sources could be used in fertilizer production, although the bioavailability of copper in these materials is unknown. The objective of this study was to evaluate the extractants neutral ammonium citrate (NAC), 2 % citric acid, 1 % acetic acid, 10 % HCl, 10 % H2SO4, buffer solution pH 6.0, DTPA, EDTA, water, and hot water in the quantification of available Cu content in several sources, relating them to the relative agronomic efficiency (RAE) of wheat grown in a clayey Latossolo Vermelho eutrófico (Oxisol) and Neossolo Quartzarênico (Typic Quartzipsamment). Copper was applied at the rate of 1.5 mg kg-1 as scrap slag, brass slag, Cu ore, granulated copper, and copper sulfate. The extractants 10 % HCl, 10 % H2SO4, and NAC extracted higher Cu concentrations. The RAE values of brass slag and Cu ore were similar to or higher than those of Cu sulfate and granulated Cu. Solubility in the 2nd NAC extractant, officially required for mineral fertilizers with Cu, was lower than 60 % for the scrap slag, Cu ore, and granulated copper sources. This fact indicates that adoption of the NAC extractant may be ineffective for industrial by-products, although no extractant was more efficient in predicting Cu availability for wheat fertilized with the Cu sources tested.

Audit report on America’s Agricultural Industrial Heritage Landscape, Inc., d/b/a Silos and Smokestacks National Heritage Area, in Waterloo, Iowa for the years ended December 31, 2011 and 2010

Audit report on America’s Agricultural Industrial Heritage Landscape, Inc., d/b/a Silos and Smokestacks National Heritage Area, in Waterloo, Iowa for the years ended December 31, 2011 and 2010

The determinants of industrial location in Spain, 1856-1929

Durant el segle XIX, l'economia espanyola va transitar per les primeres etapes de la industrialització. Aquest procés es va donar en paral·lel a la integració del mercat domèstic de béns i factors, en un moment en què les reformes liberals i la construcció de la xarxa ferroviària, entre d'altres, van generar una important caiguda en els costos detransport. Al mateix temps que es donava aquesta progressiva integració del mercat domèstic espanyol, es van produir canvis significatius en la pauta de localització industrial. D'una banda, hi hagué un augment considerable de la concentració espacial de la indústria des de mitjans de segle XIX i fins a la Guerra Civil, i d¿altra, un increment de l'especialització regional. Ara bé, quines van ser les forces que van generar aquests canvis? Des d¿un punt de vista teòric, el model de Heckscher-Ohlin suggereix que la distribució a l'espai de l¿activitat econòmica ve determinada per l'avantatge comparativa dels territoris en funció de la dotació relativa de factors. Al seu torn, els models de Nova Geografia Econòmica (NEG) mostren l'existència d'una relació en forma de campana entre el procés d'integració econòmica i el grau de concentració geogràfica de l'activitat industrial. Aquest article examina empíricament els determinants de la localització industrial a Espanya entre 1856 i 1929, mitjançant l'estimació d¿un model que combina els elements de tipus Heckscher-Ohlin i els factors apuntats des de la NEG, amb l'objectiu de contrastar la força relativa dels arguments vinculats a aquestes dues interpretacions a l'hora de modular la localització de la indústria a Espanya. L'anàlisi dels resultats obtinguts mostra que tant la dotació de factors com els mecanismes de tipus NEG van ser elements determinants que expliquen la distribució geogràfica de la indústria des del segle XIX, tot i que la seva força relativa va anar variant amb el temps.

Integración económica y localización industrial. Cataluña, la fábrica de España: ¿cuándo y por qué?

En este artículo se analizan los determinantes de la localización de la actividad industrial en España durante la segunda mitad del siglo XIX. El objetivo es estudiar la existencia de cambios en los factores explicativos de la localización, con el fin de identificar los efectos de la integración económica sobre la geografía industrial española. Para hacerlo, en primer lugar se analiza la literatura histórica existente. En segundo lugar, se describen las teorías que explican la localización de l'actividad. En tercer lugar, se realiza un análisis empírico de la localización y la concentración de la industria española al siglo XIX. A continuación, se propone un estudio econométrico de los determinantes de la localización industrial en dos cortes temporales, 1856 y 1893. Los resultados son consistentes con las teorías del comercio. Durante el decurso de la segunda mitad del siglo XIX, España paso a ser una economía integrada, la movilidad del trabajo y del capital se vio favorecida y como resultado, las diferencias relativas en las dotaciones de factores perdieron importancia en la explicación de las pautas de especialización industrial. Por el contrario, la integración económica favoreció la significación relativa de las economías de escala o de la proximidad a los mercados como elementos explicativos de la localización de la industria, favoreciendo, de esta manera, la aglomeración de la actividad industrial

Una nova estimació retrospectiva del VAB regional industrial. Espanya, 1860-1930

[cat] En aquest treball, es realitza una nova estimació del VAB industrial espanyol a un nivell de desagregació territorial corresponent a les províncies (NUTSIII) i les Comunitats Autònomes (NUTS II). Per assolir aquest objectiu es planteja una nova metodologia d’estimació de les xifres històriques de VAB industrial regional. Front a les aproximacions tradicionals, basades en la utilització de fonts fiscals com a forma d’aproximar la capacitat productiva industrial, en aquest treball s’ofereix una estimació que també es basa en les rendes generades per la producció industrial de les regions. Amb aquest objectiu, es fa servir la metodologia proposada per Geary i Stark (2002) i les millores proposades per Crafts (2005). La utilització d’aquesta metodologia permet elaborar una nova estimació retrospectiva del VAB industrial de les regions espanyoles a diversos talls temporals corresponents al període 1860-1930.

Industrial agglomerations and wage gradients: the Spanish economy in the interwar period

This paper gives new evidence on the relationship between integration and industrial agglomeration in the presence of scale economies, by testing directly one of the predictions that can be derived from Krugman (1991), that is, the existence of regional nominal wage gradients and its transformation following changes in trade regimes. Our case study analyzes the effects of the substitution of an open economy by a closed economy regime, exactly the opposite process studied by Hanson (1996, 1997). In Spain, during the interwar period, protectionist policies would have favored the loss of centrality of the coastal location (Barcelona) and the relative rise of central locations (such as Madrid). Our results indicate the existence of a wage gradient centered in Barcelona during the interwar period (1914-1930) and its weakening after 1925.

Were Spanish migrants attracted by industrial agglomerations?: an analysis for the interwar years in the light of the new economic geography

In this paper we examine whether access to markets had a significant influence onmigration choices of Spanish internal migrants in the inter-war years. We perform astructural contrast of a New Economic Geography model that focus on the forwardlinkage that links workers location choice with the geography of industrial production,one of the centripetal forces that drive agglomeration in the NEG models. The resultshighlight the presence of this forward linkage in the Spanish economy of the inter-warperiod. That is, we prove the existence of a direct relation between workers¿ localizationdecisions and the market potential of the host regions. In addition, the direct estimationof the values associated with key parameters in the NEG model allows us to simulatethe migratory flows derived from different scenarios of the relative size of regions andthe distances between them. We show that in Spain the power of attraction of theagglomerations grew as they increased in size, but the high elasticity estimated for themigration costs reduced the intensity of the migratory flows. This could help to explainthe apparently low intensity of internal migrations in Spain until its upsurge during the1920s. This also explains the geography of migrations in Spain during this period,which hardly affected the regions furthest from the large industrial agglomerations (i.e.,regions such as Andalusia, Estremadura and Castile-La Mancha) but had an intenseeffect on the provinces nearest to the principal centres of industrial development.